AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8K0164 SWING DRIVE GROUP-PART 2 OF 2 SERIAL NO. 51U2832 TO 51U5926 INCLUSIVE AND 61X381 TO 61X412 INCLUSIVE 3K5801-PAGE 93 225


HYDRAULIC SYSTEM
DRIVE GP
FRAME AND BODY
COUNTERWEIGHT GP
HOOD GP
COUNTERWEIGHT GP
LATCH GP
HOOD GP

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-PUMP
3V-8901 DRIVE GP-PUMP
DRIVE GP-PUMP
7V-5975 DRIVE GP-PUMP
DRIVE GP-PUMP
7V-5975 DRIVE GP-PUMP
DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
DRIVE GP-SWING
6W-2738 DRIVE GP-SWING
DRIVE GP-SWING
6W-2738 DRIVE GP-SWING
 

#SEBP12260450
 

8K-0164: DRIVE GP-SWING

8K0164 SWING DRIVE GROUP-PART 2 OF 2
SERIAL NO. 51U2832 TO 51U5926 INCLUSIVE AND
61X381 TO 61X412 INCLUSIVE
3K5801-PAGE 93
c220247 SEBP1226
8K0164 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4367 [1] BOLT  
2. 9S-4372 [1] RETAINER  
3. 8K-0861 [1] DRUM  
4. 1D-4326 [1] SEAL  
5. 8K-0665 [1] CAGE  
  5F-3106 [1] SEAL  
6. 3K-5799 [1] CAMSHAFT & LEVER ASSEM.  
7. 2N-2138 [1] CUP  
  2N-2139 [1] CONE  
8. 7D-8348 [1] CUP  
  7D-8349 [1] CONE  
9. 2V-0818 [1] GEAR (38 & 13 Teeth)  
10. 8K-0582 [1] SHIM PACK  
11. 9S-3581 [2] CUP  
  9S-3582 [2] CONE  
12. 2V-0817 [1] GEAR (43 & 13 Teeth)  
13. 3K-0649 [1] CUP  
  3P-1210 [1] CONE  
14. 2V-0816 [1] PINION (13 Teeth)  
15. 8K-0583 [1] CAGE  
  2H-3931 [1] SEAL  
16. 0S-1585 [14] BOLT  
17. 2M-0849 [10] WASHER  
  2B-7557 [4] CORK  
18. 8K-0708 [1] SHIM PACK  
19. 8K-1944 [1] CASE ASSEM.  
  7M-8480 [2] DOWEL  
20. 7M-7260 LIQUID GASKET  
21. 1D-4629 [8] BOLT  
  9H-1031 [8] WASHER  
22. 8K-0584 [1] COUPLING  
23. 7K-8876 [1] CUP  
  7K-8877 [1] CONE  
24. 8K-0712 [1] SHIM PACK  
25. 3K-5801 Y [1] BRAKE ASSEM.  
    (Separate Illustration)
26. 3B-4508 [4] LOCKWASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260451
 

8K-0164: DRIVE GP-SWING

8K0164 SWING DRIVE GROUP-PART 1 OF 2
SERIAL NO. 51U5927 TO 51U6170 INCLUSIVE AND 61X413 ONLY
c333247 SEBP1226
8K0164 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0439 [2] BOLT  
2. 8K-0579 [2] RETAINER  
  8K-0709 [1] SHIM-PACK  
3. 2V-0814 [1] GEAR-OUTPUT (43 TEETH)  
4. 6B-5262 [1] PLUG-DRAIN  
  6K-5551 [1] GASKET  
5. 2B-7557 [4] CORK  
6. 2B-0947 [19] BOLT  
7. 5P-8245 C [23] WASHER  
8. 8K-0578 [1] SPACER  
9. 8S-9076 [1] CUP-BEARING  
10. 8S-9075 [1] CONE-BEARING  
11. 0S-1625 [8] BOLT  
  5P-8247 C [8] WASHER-HARD  
12. 8K-1945 [1] SHAFT AS-OUTPUT  
  [2] DOWEL  
13. 8K-1946 [1] RETAINER AS  
  2A-3348 [1] DOWEL  
14. 2K-2939 [1] SEAL-O-RING  
15. 5P-9121 R [1] SEAL GP-DUO-CONE  
  5P-9120 [2] RING-SEALING  
16. 3V-5148 [1] PINION-SWING GEAR (17 TEETH)  
  5H-7704 [1] SEAL-O-RING  
17. 8K-1940 [1] RETAINER AS  
  2A-3348 [2] DOWEL  
18. 8K-0578 [1] SPACER  
19. 2D-8009 [1] SEAL-O-RING  
20. 2P-1374 [1] CONE-ROLLER BEARING  
21. 2P-1373 [1] CUP-ROLLER BEARING  
22. 8K-4051 [1] CARTRIDGE  
23. 6V-6640 CB SEALANT  
24. 0S-1585 [4] BOLT  
25. 8K-0576 [1] CAGE-BEARING  
  1H-8128 [1] SEAL-O-RING  
26. 8K-0520 [1] COVER-SWING DRIVE  
27. 2D-1691 [1] SEAL-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260452
 

8K-0164: DRIVE GP-SWING

8K0164 SWING DRIVE GROUP-PART 2 OF 2
SERIAL NO. 51U5927 TO 51U6170 INCLUSIVE AND 61X413 ONLY
3K5801-PAGE 93
c333248 SEBP1226
8K0164 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4367 [1] BOLT  
2. 9S-4372 [1] RETAINER  
3. 8K-0861 [1] DRUM-BRAKE  
4. 1D-4326 [1] SEAL-LIP TYPE  
5. 8K-0665 [1] CAGE-BEARING  
  5F-3106 [1] SEAL-O-RING  
6. 3K-5799 [1] CAM & LEVER AS  
7. 2N-2138 [1] CUP-ROLLER BEARING  
  2N-2139 [1] CONE-ROLLER BEARING  
8. 7D-8348 [1] CUP-ROLLER BEARING  
  7D-8349 [1] CONE-ROLLER BEARING  
9. 7V-7975 C [1] GEAR (38 TEETH)  
10. 8K-0582 [1] SHIM PACK  
11. 9S-3581 [2] CUP-ROLLER BEARING  
  9S-3582 [2] CONE-ROLLER BEARING  
12. 2V-0817 [1] GEAR (43 & 13 TEETH)  
13. 3K-0649 [1] CUP-BEARING  
  3P-1210 [1] CONE-ROLLER BEARING  
14. 2V-0816 [1] PINION (13 TEETH)  
15. 8K-0583 [1] CAGE-BEARING  
  2H-3931 [1] SEAL-O-RING  
16. 0S-1585 [14] BOLT  
17. 5P-8245 C [10] WASHER  
  2B-7557 [4] CORK  
18. 8K-0708 [1] SHIM PACK  
19. 8K-1944 [1] CASE AS-SWING DRIVE  
  7M-8480 [2] DOWEL  
20. 6V-6640 CB SEALANT  
21. 1D-4629 [8] BOLT  
  5P-8249 C [8] WASHER  
22. 8K-0584 [1] COUPLING  
23. 7K-8876 [1] CUP-BEARING  
  7K-8877 [1] CONE-BEARING  
24. 8K-0712 [1] SHIM PACK  
25. 3K-5801 Y [1] BRAKE AS  
26. 3B-4508 [4] LOCKWASHER  
27. 7K-4520 C [1] RING-LOCK  
28. 7V-7976 C [1] PINION-SWING DRIVE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260453
 

6W-2738: DRIVE GP-SWING

6W2738 SWING DRIVE GROUP-PART 1 OF 2
SERIAL NO. 51U6171-UP AND 61X414-UP
c411730 SEBP1226
6W2738 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0439 [2] BOLT  
2. 8K-0579 [2] RETAINER  
  8K-0709 [1] SHIM-PACK  
3. 2V-0814 [1] GEAR-OUTPUT (43 TEETH)  
4. 6B-5262 [1] PLUG-DRAIN  
  6K-5551 [1] GASKET  
5. 2B-7557 [4] CORK  
6. 2B-0947 [15] BOLT  
7. 5P-8245 [19] WASHER  
8. 8K-0578 [1] SPACER  
9. 8S-9076 [1] CUP-BEARING  
10. 8S-9075 [1] CONE-BEARING  
11. 0S-1625 [8] BOLT  
  5P-8247 [8] WASHER-HARD  
12. 8K-1945 [1] SHAFT AS-OUTPUT  
  [2] DOWEL  
13. 8K-1946 [1] RETAINER AS  
  2A-3348 [1] DOWEL  
14. 2K-2939 [1] SEAL-O-RING  
15. 5P-9121 R [1] SEAL GP-DUO-CONE  
  5P-9120 [2] RING-SEALING  
16. 3V-5148 [1] PINION-SWING GEAR (17 TEETH)  
  8T-7146 C [1] SEAL-FACE  
   
   
17. 8K-1940 [1] RETAINER AS  
  2A-3348 [2] DOWEL  
18. 8K-0578 [1] SPACER  
19. 8T-7148 C [1] SEAL-FACE  
20. 2P-1374 [1] CONE-ROLLER BEARING  
21. 2P-1373 [1] CUP-ROLLER BEARING  
22. 8K-4051 [1] CARTRIDGE  
23. 6V-6640 B SEALANT  
24. 0S-1585 [4] BOLT  
25. 8K-0576 [1] CAGE-BEARING  
  1H-8128 [1] SEAL-O-RING  
26. 6W-2635 [1] COVER-SWING DRIVE  
27. 2D-1691 [1] SEAL-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12260454
 

6W-2738: DRIVE GP-SWING

6W2738 SWING DRIVE GROUP-PART 2 OF 2
SERIAL NO. 51U6171-UP AND 61X414-UP
3K5801-PAGE 93
c411731 SEBP1226
6W2738 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4367 [1] BOLT  
2. 9S-4372 [1] RETAINER  
3. 8K-0861 [1] DRUM-BRAKE  
4. 1D-4326 [1] SEAL-LIP TYPE  
5. 8K-0665 [1] CAGE-BEARING  
  5F-3106 [1] SEAL-O-RING  
6. 3K-5799 [1] CAM & LEVER AS  
7. 2N-2138 [1] CUP-ROLLER BEARING  
  2N-2139 [1] CONE-ROLLER BEARING  
8. 7D-8348 [1] CUP-ROLLER BEARING  
  7D-8349 [1] CONE-ROLLER BEARING  
9. 7V-7975 [1] GEAR (38 TEETH)  
10. 8K-0582 [1] SHIM PACK  
11. 9S-3581 [2] CUP-ROLLER BEARING  
  9S-3582 [2] CONE-ROLLER BEARING  
12. 2V-0817 [1] GEAR (43 & 13 TEETH)  
13. 3K-0649 [1] CUP-BEARING  
  3P-1210 [1] CONE-ROLLER BEARING  
14. 2V-0816 [1] PINION (13 TEETH)  
15. 8K-0583 [1] CAGE-BEARING  
  2H-3931 [1] SEAL-O-RING  
16. 0S-1585 C [10] BOLT  
17. 5P-8245 [10] WASHER  
  2B-7557 [4] CORK  
18. 8K-0708 [1] SHIM PACK  
   
19. 8K-1944 [1] CASE AS-SWING DRIVE  
  7M-8480 [2] DOWEL  
20. 6V-6640 B SEALANT  
21. 1D-4629 [8] BOLT  
  5P-8249 [8] WASHER  
22. 8K-0584 [1] COUPLING  
23. 7K-8876 [1] CUP-BEARING  
  7K-8877 [1] CONE-BEARING  
24. 8K-0712 [1] SHIM PACK  
25. 3K-5801 Y [1] BRAKE AS (PARKING)  
26. 7B-3235 C [4] BOLT  
27. 7K-4520 [1] RING-LOCK  
28. 7V-7976 [1] PINION-SWING DRIVE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260455
 

6W-9875: COUNTERWEIGHT GP

6W9875 COUNTERWEIGHT GP
PART OF 6W9985 & 6W9986 SPECIAL ARS
AN ATTACHMENT
c511748 SEBP1226
6W9875 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-9444 [1] COUNTERWEIGHT  
2. 6M-1029 [4] BOLT  
  8T-5361 [4] WASHER (5MM THK)  
  7X-0616 [4] WASHER-HARD (57MM THK)  
3. 4E-2640 [1] NAMEPLATE  
4. 8K-3898 [4] BOLT-SHEAR HEAD  
  3F-1417 [4] WASHER  
  8K-3970 [4] SPACER  
5. 8K-2729 [1] TREAD-ANTI-SKID (CENTER)  
6. 8K-2725 [1] TREAD-ANTI-SKID (LH)  
7. 8K-2726 [1] TREAD-ANTI-SKID (RH)  
 

#SEBP12260456
 

3V-9205: DOOR GP-HOOD SIDE

3V9205 HOOD SIDE DOOR GROUP-TYPE 1
FOR SERIAL NO. REFER TO PAGE 97A
PART OF 3V9210 SUPPLEMENTAL COOLING
AN ATTACHMENT
c215673 SEBP1226
3V9205 DOOR GP-HOOD SIDE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  4B-4278 [10] WASHER  
2. 8K-0911 [2] GRILL ASSEM.  
3. 3V-1923 [2] DOOR ASSEM.  
    (Each Includes)
4. 8K-0854 [2] HINGE  
5. 9M-5733 [1] RIVET  
6. 3V-1971 [1] LATCH ASSEM.  
    (Includes)
7. 3V-8656 H [1] LOCK ASSEM.  
  3V-8662 [1] WASHER  
8. 9F-2978 [5] NUT (weld)  
  H   LOCK REQUIRES 9K8415 KEY
 

#SEBP12260457
 

8K-0159: COUNTERWEIGHT GP

8K0159 COUNTERWEIGHT GROUP-REAR
2585 KG (5700 LBS.)
c345284 SEBP1226
8K0159 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6M-2001 C [4] BOLT  
  6V-5734 C [4] WASHER-HARD 6MM(.236IN)THK  
2. 8K-4133 C [1] COUNTERWEIGHT  
3. 8K-2725 [1] TREAD-ANTI-SKID (LH SIDE TOP)  
4. 8K-2727 [1] TREAD-ANTI-SKID (CENTER)  
5. 8K-2726 [1] TREAD-ANTI-SKID (RH SIDE TOP)  
6. 8K-3898 [6] BOLT-SHEAR HEAD  
  3F-1417 [6] WASHER  
  8K-3970 [6] SPACER  
7. 8K-3709 [1] NAMEPLATE  
8. 9S-2961 C [4] WASHER 12.7MM(.50IN)THK  
    -OR-
  5P-8250 C [4] WASHER 5MM(.197IN)THK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12260458
 

3V-4456: LATCH AS

3V4456 LATCH ASSEMBLY
PART OF 3V1857 HOOD AND GUARD
c214009 SEBP1226
3V4456 LATCH AS Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-8658 [1] BOLT ASSEM.  
    (Includes)
2. 4B-1254 [1] SCREW  
  1H-3338 [1] LOCKWASHER  
3. 5P-5630 H TUBE .025 m(1.00 in.)  
4. 3V-8659 [1] CABLE  
5. 3V-8657 [1] ROLLER  
6. 3V-8662 [1] WASHER  
7. 3V-8656 [1] LOCK ASSEM.  
    (Includes)
  9K-8415 [1] KEY  
8. 1P-1135 [1] SCREW  
9. 2V-3462 [1] NUT  
  3S-4773 [1] WASHER  
  2R-4761 [1] SLEEVE  
  H   ORDER BY THE METRE
 

#SEBP12260459
 

3V-9205: DOOR GP-HOOD SIDE

3V9205 HOOD SIDE DOOR GROUP-TYPE 2
SEE PAGE 97A FOR SERIAL NOS.
PART OF 3V9210 SUPPLEMENTAL COOLING
c173289 SEBP1226
3V9205 DOOR GP-HOOD SIDE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  4B-4278 [10] WASHER  
2. 8K-0911 [2] GRILL ASSEM.  
3. 5V-2445 C [1] DOOR ASSEM.  
4. 5V-2446 C [1] DOOR ASSEM.  
    (Each Includes)
5. 9M-5733 [6] RIVET  
6. 3V-1971 [1] LATCH ASSEM.  
    (Includes)
7. 3V-8656 H [1] LOCK ASSEM.  
  3V-8662 [1] WASHER  
8. 9F-2978 [5] NUT (weld)  
9. 8K-0854 [2] HINGE  
  C   INDICATES CHANGE
  H   LOCK REQUIRES 9K8415 KEY
 

Information:

Special Instruction
Reinforce Upper Frame After Failure Of Swing Bearing And Gear Group Or Swing Pinion{5459, 6506, 7051, 7063}
Reinforce Upper Frame After Failure Of Swing Bearing And Gear Group Or Swing Pinion{5459, 6506, 7051, 7063}
Specifications
Pump Drive<BR> (8K183)
225 EXCAVATOR HYDRAULIC SYSTEM
Swing Drive<BR> (8K164)
225 EXCAVATOR HYDRAULIC SYSTEM
Drive Gear For The Injection Pump
3208 VEHICULAR ENGINE
Swing Drive<BR> (8K164)
225 EXCAVATOR HYDRAULIC SYSTEM
Pump Drive<BR> (3V8901 &amp; 7V5975)
225 EXCAVATOR HYDRAULIC SYSTEM
Disassembly and Assembly
Pump Drive
225 EXCAVATOR VEHICLE SYSTEMS
Swing Drive
225 EXCAVATOR VEHICLE SYSTEMS
Swing Drive
225 EXCAVATOR VEHICLE SYSTEMS
Pump Drive
225 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
SAE 30 Oil Now Used In Swing Drive And Final Drive{5459,4070}
1980/02/25
Repair Procedure For Pump Drive Mounting Bracket{3279,3108,1154,1165}
1981/05/11
New Pump Drive Group Has Dipstick And Improved Seals{3108}
1981/08/03
New Center Bearing Cage With A Breather Used On Pump Drive Groups{3108}
1984/05/07
Enlarged Chamfer Can Improve The Fit Between The Swing Drive Case Assembly And Cartridge{5459}
1985/07/15
A Washer With Closer Tolerances Is Now Used In The Governor And Fuel Pump Drive Group{1288,7462}
1978/11/20
New 4C6186 Driver Tool Group Available To Help Install Lip Seals, Bearing Cups, And Cones In Pump Drives{0600,0700,3108}
1990/06/18
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 225 :

DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
CONTROL GP-SWING BRAKE
3V-4487 CONTROL GP-SWING BRAKE
BRAKE AS
3K-5801 BRAKE AS
CONTROL GP-SWING BRAKE
3V-4487 CONTROL GP-SWING BRAKE
DRIVE GP-PUMP
7V-5975 DRIVE GP-PUMP
DRIVE GP-PUMP
7V-5975 DRIVE GP-PUMP
DRIVE GP-PUMP
3V-8901 DRIVE GP-PUMP
FINAL DRIVE GP
6W-4920 FINAL DRIVE GP
DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
DRIVE GP-SWING
8K-0164 DRIVE GP-SWING
DRIVE GP-SWING
6W-2738 DRIVE GP-SWING
DRIVE GP-SWING
6W-2738 DRIVE GP-SWING
COUNTERWEIGHT GP
6W-9875 COUNTERWEIGHT GP
DOOR GP-HOOD SIDE
3V-9205 DOOR GP-HOOD SIDE
COUNTERWEIGHT GP
8K-0159 COUNTERWEIGHT GP
LATCH AS
3V-4456 LATCH AS

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.