AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4V9221 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 5 OF 5-TYPE 4 SERIAL NO. 51U4399-UP & 61X398-UP 3G0302-PAGE 152, 9J7903-PAGE 154, 7N9179-PAGE 154X.03 FOR FIELD REPLACEMENT ORDER 8V0500-PAGE 154M PART OF 8V0495 & 8V0510 GRAPPLE CONTROL. AN ATTACHMENT 225


OPERATOR STATION
CONTROL GP-HYDRAULIC

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
 

#SEBP12260680
 

4V-9221: CONTROL GP-GRAPPLE

4V9221 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 5 OF 5-TYPE 4
SERIAL NO. 51U4399-UP & 61X398-UP
3G0302-PAGE 152, 9J7903-PAGE 154, 7N9179-PAGE 154X.03
FOR FIELD REPLACEMENT ORDER 8V0500-PAGE 154M
PART OF 8V0495 & 8V0510 GRAPPLE CONTROL. AN ATTACHMENT
c323861 SEBP1226
4V9221 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0302 Y [1] PUMP GP-GEAR  
  7J-8114 [1] GASKET  
2. 6H-1717 [2] BOLT  
3. 5P-7213 [6] WASHER-HARD  
4. 4V-6834 [1] HOSE AS  
  9S-0247 G HOSE (86M)  
5. 1P-1711 [1] COUPLING AS (90 DEG.)  
6. 8S-3759 [1] COUPLING AS (STRGT.)  
7. 3S-7166 [2] SLEEVE  
8. 030-7944 [1] ELBOW  
9. 3D-2824 [2] SEAL-O-RING  
10. 8J-5914 [1] PLUG-O-RING  
  2S-4078 [1] SEAL-O-RING  
11. 5P-6719 [1] PLUG  
  3J-1907 [1] SEAL  
12. 4V-6836 [1] ADAPTER  
  4J-0520 [1] SEAL  
13. 9J-7903 Y [1] PUMP GP-GEAR  
  [1] SEAL  
14. 0S-1595 [4] BOLT  
15. 030-7950 [1] ELBOW  
16. 4B-1229 [2] SCREW  
  4B-2047 [2] NUT  
  2H-2615 [2] WASHER  
17. 1P-5976 [1] RELAY AS  
18. 7V-1108 [1] BRACKET  
19. 7N-9179 Y [2] SWITCH & HANDLE GP  
    (DUAL TILT OVERRIDE)
20. 3V-1965 [2] ADAPTER  
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260681
 

4V-9221: CONTROL GP-GRAPPLE

4V9221 CONTROL GP-GRAPPLE-TANDEM CENTER-PART 1 OF 5-TYPE 5
S/N 51U4399-UP & 61X398-UP
FOR FIELD REPLACEMENT ORDER 8V0500-PAGE 154M
PART OF 8V0495 & 8V0510 GRAPPLE CONTROL, 6W9985 & 6W9986 SPECIAL ARS
AN ATTACHMENT
c407883 SEBP1226
4V9221 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6W-6301 C [1] HOSE AS  
2. 1P-4577 [6] FLANGE-HALF  
  4J-0520 [3] SEAL  
3. 8S-9191 [4] BOLT  
4. 5M-2894 [12] WASHER  
5. 5S-9348 C [1] HOSE AS  
6. 5V-8351 [2] PIPE  
  2V-0936 [4] WASHER  
7. 1A-5822 C [2] BOLT  
  8B-9725 C [2] BOSS  
8. 1D-4569 [2] BOLT  
9. 5P-8245 C [8] WASHER  
10. 7V-0700 [1] SPACER  
11. 0L-1352 [4] BOLT  
12. 1D-4717 [4] NUT (FULL)  
13. 1D-4572 C [4] BOLT  
14. 6W-4999 C [1] ELBOW  
  1H-7339 [1] SEAL-O-RING  
15. 3V-8860 [1] ADAPTER  
  6J-2680 C [1] SEAL-O-RING  
16. 3H-5368 [16] BOLT  
17. 5P-8244 [16] WASHER  
18. 1P-4578 [8] FLANGE  
  4J-0522 [4] SEAL  
19. 1D-4615 [2] BOLT  
  5P-8248 [2] WASHER-HARD  
20. 7B-3235 [4] BOLT  
21. 6W-6302 C [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12260682
 

4V-9221: CONTROL GP-GRAPPLE

4V9221 CONTROL GP-GRAPPLE-TANDEM CENTER-PART 2 OF 5-TYPE 5
S/N 51U4399-UP & 61X398-UP
3G7255-PAGE 154S. FOR FIELD REPLACEMENT ORDER 8V0500-PAGE 154M
PART OF 8V0495 & 8V0510 GRAPPLE CONTROL, 6W9985 & 6W9986 SPECIAL ARS
AN ATTACHMENT
c407884 SEBP1226
4V9221 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-7255 Y [1] VALVE GP  
2. 7V-0711 [1] COVER  
3. 0S-0509 [6] BOLT  
4. 5P-1075 [12] WASHER-HARD  
5. 7N-0707 [1] SUPPORT AS  
6. 3K-0360 [1] SEAL-O-RING  
7. 7K-1181 [4] STRAP-CABLE  
8. 7V-0732 [1] WIRE AS  
9. 0S-1626 [2] BOLT  
  5P-8248 [2] WASHER-HARD  
10. 4S-1962 [4] CLIP  
11. 7D-1728 [4] CLIP  
12. 0T-0102 [4] BOLT  
13. 2D-7689 [2] CLAMP-HOSE  
  7V-0695 [2] BLOCK  
14. 0S-1619 [4] BOLT  
15. 1D-4717 [10] NUT (FULL)  
16. 5M-2894 [24] WASHER  
17. 7V-0722 [1] HOSE AS  
18. 0S-1591 [4] BOLT  
19. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR (FLARED)  
20. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
21. 6W-6878 C [1] ANGLE AS  
22. 0T-0573 [4] BOLT  
23. 2P-1281 [1] UNION-BULKHEAD  
  7F-2050 [1] LOCKNUT  
24. 1P-4577 [4] FLANGE-HALF  
  4J-0520 [3] SEAL (O-RING)  
25. 7V-0719 [1] HOSE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260683
 

4V-9221: CONTROL GP-GRAPPLE

4V9221 CONTROL GP-GRAPPLE-TANDEM CENTER-PART 3 OF 5-TYPE 5
S/N 51U4399-UP & 61X398-UP
FOR FIELD REPLACEMENT ORDER 8V0500-PAGE 154M
PART OF 8V0495 & 8V0510 GRAPPLE CONTROL, 6W9985 & 6W9986 SPECIAL ARS.
AN ATTACHMENT
c412234 SEBP1226
4V9221 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7226 [4] BOLT  
2. 5P-8244 [12] WASHER  
3. 7V-0724 [1] HOSE AS  
4. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
5. 0T-0772 D [8] BOLT  
  1P-4578 [4] FLANGE  
  4J-0522 [2] SEAL  
6. 7V-0722 [1] HOSE AS  
7. 7V-0723 [1] HOSE AS  
8. 8K-1681 [1] HOSE AS  
9. 2V-1724 [1] TUBE AS  
10. 9S-4184 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
11. 0T-0573 [4] BOLT  
12. 1D-4717 [6] NUT (FULL)  
13. 1P-4577 [6] FLANGE-HALF  
  4J-0520 [4] SEAL  
14. 2P-1281 [1] UNION-BULKHEAD  
  7F-2050 [1] LOCKNUT  
15. 6W-6880 C [1] ANGLE AS  
  1D-4719 C [1] NUT (FULL)  
  0S-1621 C [1] BOLT  
   
   
16. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
  5P-1075 [2] WASHER-HARD  
17. 2G-3738 [1] HOSE AS  
18. 6K-9194 [1] ELBOW  
  030-8144 [1] REDUCER-FLARED  
  1P-1441 [1] NUT-FLARED  
19. 030-7947 [1] ELBOW  
  3J-1907 [1] SEAL  
20. 1P-3705 [2] SEAL  
21. 0T-0768 [4] BOLT  
22. 0S-1588 [4] BOLT  
23. 0S-1591 [4] BOLT  
24. 5M-2894 [12] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP12260684
 

4V-9221: CONTROL GP-GRAPPLE

4V9221 CONTROL GP-GRAPPLE-TANDEM CENTER-PART 4 OF 5-TYPE 5
S/N 51U4399-UP & 61X398-UP
9V8602-PAGE 154X.04, 9V8889-PAGE 154X.05. FOR FIELD REPLACEMENT ORDER
8V0500-PAGE 154M. PART OF 8V0495 & 8V0510 GRAPPLE CONTROL, 6W9985 & 6W9986
SPECIAL ARS. AN ATTACHMENT
c341413 SEBP1226
4V9221 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9V-8602 Y [1] HARNESS AS  
2. 6S-5693 [1] TEE  
3. 2P-8130 [1] TEE-UNION  
4. 7F-2050 [1] LOCKNUT  
  1F-4166 [1] WASHER  
5. 9D-7032 [1] SWITCH AS (OIL PRESSURE)  
6. 3B-7722 [1] BUSHING  
7. 5P-8018 [1] UNION-ADAPTER  
8. 2V-0152 [1] HOSE AS  
  2R-6806 [1] CONNECTOR  
  3J-1907 [1] SEAL  
9. 2P-1278 [1] UNION-BULKHEAD  
  2P-1279 [1] LOCKNUT  
10. 9V-8856 [1] TUBE AS  
11. 9V-8889 Y [2] HARNESS AS  
12. 7K-1181 [5] STRAP-CABLE  
13. 2V-9473 [1] DIODE AS  
14. 7V-1110 [1] HARNESS AS  
  5P-5623 BD WIRE (16 GA)  
15. 2L-8075 [2] TERMINAL  
16. 7V-0733 [1] WIRE AS  
  5P-5623 BD WIRE (16 GA)  
  6N-9587 [4] CONNECTOR (SOLENOID)  
   
   
   
17. 030-8144 [1] REDUCER-FLARED  
  1P-1441 [1] NUT-FLARED  
  9V-9293 F [1] WIRE AS  
    (TO CONSOLE HARNESS)
  3G-7382 F [1] PLUG-ORIFICE  
  F [1] ENVELOPE (PACKAGED  
    WITH LITERATURE GP)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260685
 

4V-9221: CONTROL GP-GRAPPLE

4V9221 CONTROL GP-GRAPPLE-TANDEM CENTER-PART 5 OF 5-TYPE 5
S/N 51U4399-UP & 61X398-UP
3G0302-PAGE 152, 9J7903-PAGE 154, 7N9179-PAGE 154X.03. FOR FIELD
REPLACEMENT ORDER 8V0500-PAGE 154M. PART OF 8V0495 & 8V0510 GRAPPLE
CONTROL, 6W9985 & 6W9986 SPECIAL ARS. AN ATTACHMENT
c341414 SEBP1226
4V9221 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0302 Y [1] PUMP GP-GEAR  
  7J-8114 [1] GASKET  
2. 6H-1717 [2] BOLT  
3. 5P-7213 [6] WASHER-HARD  
4. 6W-4640 C [1] HOSE AS  
5. 5P-7468 C [1] CLIP (SLOT)  
  5P-7469 C [1] CLIP (TAB)  
6. 5P-8444 C [1] GROMMET  
  5V-9221 C [1] SPACER  
7. 1A-1460 C [1] BOLT  
8. 5P-8245 C [1] WASHER  
9. 3D-2824 [2] SEAL-O-RING  
10. 8J-5914 [1] PLUG-O-RING  
  2S-4078 [1] SEAL-O-RING  
11. 5P-6719 [1] PLUG  
  3J-1907 [1] SEAL  
12. 4V-6836 [1] ADAPTER  
  4J-0520 [1] SEAL  
13. 9J-7903 Y [1] PUMP GP-GEAR  
  [1] SEAL  
14. 0S-1595 [4] BOLT  
15. 030-7950 C [2] ELBOW  
16. 4B-1229 [2] SCREW  
  4B-2047 [2] NUT  
  2H-2615 [2] WASHER  
17. 1P-5976 [1] RELAY AS  
18. 7V-1108 [1] BRACKET  
19. 7N-9179 Y [2] SWITCH & HANDLE GP  
    (DUAL TILT OVERRIDE)
20. 3V-1965 [2] ADAPTER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260686
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 1 OF 5-TYPE 1
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c182536 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-0547 [1] ELBOW  
2. 1P-4577 [6] FLANGE  
  4J-0520 [3] SEAL  
3. 8S-9191 [4] BOLT  
4. 5M-2894 [12] WASHER  
5. 7V-0725 [1] HOSE ASSEM.  
  8S-9355 H HOSE 43.7 in.(1.11m)  
  3S-8497 [1] STEM ASSEM. (22.5 DEGREES)  
6. 3S-8502 [1] STEM ASSEM. (67.5 DEGREES)  
7. 3S-7252 [2] SLEEVE  
8. 1D-4569 [2] BOLT  
9. 5P-8245 [10] WASHER  
10. 7V-0700 [1] SPACER  
11. 0L-1352 [4] BOLT  
  1D-4717 [4] NUT  
12. 8K-0248 [1] BLOCK  
13. 2A-1531 [4] BOLT  
14. [1] ELBOW  
  1H-7339 [1] SEAL  
15. 3V-8860 [1] ADAPTER  
  5H-8848 [1] SEAL  
16. 3H-5368 [16] BOLT  
17. 5P-8244 [16] WASHER  
18. 1P-4578 [8] FLANGE  
  4J-0522 [4] SEAL  
19. 1D-4615 [2] BOLT  
  5P-8248 [2] WASHER  
20. 7B-3235 [4] BOLT  
21. 2V-1696 [1] HOSE ASSEM. .86m(33.86 in.)  
22. 4V-6019 [1] HOSE ASSEM. 1.08m(42.52 in.)  
  H   ORDER BY THE INCH
 

#SEBP12260687
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 2 OF 5-TYPE 1
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
3G7255-PAGE 154S
FIELD REPLACEMENT ORDER 4V9221-PAGE 154B
AN ATTACHMENT
c182537 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-7255 Y [1] VALVE GROUP  
    (Separate Illustration)
2. [1] COVER  
3. 0S-0509 [6] BOLT  
4. 5P-1075 [12] WASHER  
5. 7V-0707 [1] SUPPORT ASSEM.  
6. 8D-0894 [2] BLOCK  
7. 7K-1181 [4] STRAP  
8. 7V-0732 [1] WIRE ASSEM.  
  5P-5623 J WIRE .53m(20.87 in.)  
9. 6N-9587 [1] CONNECTOR  
10. 5P-5610 [1] CONNECTOR  
11. 4V-7412 [4] BOSS  
12. 7D-1728 [4] CLIP  
  0T-0102 [4] BOLT  
13. 2D-7689 [2] CLAMP  
  7V-0695 [2] BLOCK  
14. 0S-1619 [4] BOLT  
15. 1D-4717 [10] NUT  
16. 5M-2894 [24] WASHER  
17. 7V-0721 [1] HOSE ASSEM.  
  8S-9355 H HOSE 33.86 in.(.86m)  
18. 3S-7252 [2] SLEEVE  
19. 3S-8498 [2] STEM ASSEM.  
20. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
21. 7V-0698 [1] ANGLE ASSEM.  
22. 0L-2070 [4] BOLT  
23. 2P-1281 [1] UNION  
  7F-2050 [1] LOCKNUT  
24. 1P-4577 [4] FLANGE  
  4J-0520 [3] SEAL  
25. 7V-0719 [1] HOSE ASSEM.  
  9S-0671 H HOSE 50 in.(1.27m)  
26. 8S-4055 [2] COUPLING ASSEM.  
27. 3S-8606 [2] SLEEVE  
28. 7V-0697 [1] PLATE (R.H.)  
  7V-0696 [1] PLATE (L.H.)  
29. 2G-8579 [2] CLAMP  
30. 0S-1591 [4] BOLT  
31. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
  3K-0360 [1] SEAL  
32. 0S-1626 [2] BOLT  
  5P-8248 [2] WASHER  
  J   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP12260688
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 3 OF 5-TYPE 1
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c182538 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7226 [4] BOLT  
2. 5P-8244 [12] WASHER  
3. 7V-0724 [1] HOSE ASSEM.  
  8S-9355 H HOSE 24.8 in.(.63m)  
  7S-0573 [1] STEM ASSEM. (45 DEGREES)  
4. 3S-7252 [2] SLEEVE  
5. 3S-8501 [1] STEM ASSEM. (60 DEGREES)  
6. 7V-0722 [1] HOSE ASSEM.  
  8S-9355 H HOSE 35.83 in.(.91 m)  
7. 3S-8498 [2] STEM ASSEM.  
8. 3S-7252 [2] SLEEVE  
9. 2V-1724 [1] TUBE ASSEM.  
10. 9S-4184 [1] PLUG  
  3D-2824 [1] SEAL  
11. 0L-2070 [4] BOLT  
12. 1D-4717 [6] NUT  
13. 1P-4577 [6] FLANGE  
  4J-0520 [4] SEAL  
14. 2P-1281 [1] UNION  
  7F-2050 [1] LOCKNUT  
15. 7V-0699 [1] ANGLE ASSEM.  
16. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
  5P-1075 [2] WASHER  
17. 2G-3738 [1] HOSE ASSEM.  
  9S-0671 H HOSE 55.91 in.(1.42m)  
18. 8S-4055 [2] COUPLING ASSEM.  
19. 3S-8606 [2] SLEEVE  
20. 1P-3705 [2] SEAL  
21. 0T-0768 [4] BOLT  
22. 4D-6267 [1] BLOCK  
23. 0S-1591 [4] BOLT  
24. 5M-2894 [12] WASHER  
25. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
  3K-0360 [1] SEAL  
26. 0T-0772 [8] BOLT  
  1P-4578 [4] FLANGE  
  4J-0522 [2] SEAL  
27. 7V-0723 [1] HOSE ASSEM.  
  8S-9355 H HOSE 19.29 in.(.49m)  
  3S-8497 [1] STEM ASSEM. (22.5 DEGREES)  
28. 3S-7252 [2] SLEEVE  
29. 7S-0572 [1] STEM ASSEM. (30 DEGREES)  
30. 0S-1588 [4] BOLT  
  H   ORDER BY THE INCH
 

#SEBP12260689
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 4 OF 5-TYPE 1
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c182539 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-6936 [1] REDUCER  
  1P-1441 [1] NUT  
2. 8M-0547 [1] ELBOW  
3. 2P-8130 [2] TEE  
4. 7F-2050 [2] LOCKNUT  
  1F-4166 [2] WASHER  
5. 9D-7032 [1] SWITCH ASSEM. (oil pressure)  
6. 3B-7722 [1] BUSHING  
7. 5P-8018 [1] UNION  
8. 2V-0152 [1] HOSE ASSEM. 1.97m(77.56 in.)  
  2R-6806 [1] CONNECTOR  
  3J-1907 [1] SEAL  
9. 2P-1278 [1] UNION  
  2P-1279 [1] LOCKNUT  
10. 2V-8679 [1] HOSE ASSEM. .79m(31.1 in.)  
11. 7V-1109 [1] HARNESS ASSEM.  
  5P-5623 J WIRE (16 gauge)  
12. 2L-8076 [1] TERMINAL (relay A1)  
  2L-8074 [2] TERMINAL (relay X1, X2)  
  2L-8066 [1] TERMINAL (relay A2)  
13. 2L-8067 [1] TERMINAL (ground)  
14. 5P-3161 [1] CONNECTOR  
15. 7K-1181 [5] STRAP  
16. 2V-9473 [1] DIODE ASSEM.  
17. 7V-1110 [1] HARNESS ASSEM.  
  5P-5623 J WIRE (16 gauge)  
18. 2L-8075 [2] TERMINAL  
19. 7V-0733 [1] WIRE ASSEM.  
  5P-5623 J WIRE (16 gauge)  
  6N-9587 [4] CONNECTOR (solenoid)  
  7V-1107 L [1] WIRE ASSEM.  
    (To Console Harness)
  3G-7382 L [1] PLUG  
  L [1] ENVELOPE  
    (Packaged with literature group)
  J   ORDER BY THE METER
  L   NOT SHOWN
 

Information:

Special Instruction
Installation Of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Installation Of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Parts List For Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Parts List For Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Parts List for Installation of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Parts List for Installation of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Installation Of 8V500 Grapple Control Group{6500}
Installation Of 8V500 Grapple Control Group{6500}
Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Specifications
Boom Speed Control<BR> (8J2429)
225 EXCAVATOR HYDRAULIC SYSTEM
225 Excavator Boom, Bucket And Stick Control Groups<BR> [One piece boom - 2.44 m (8 ft.) and 3.0 m (10 ft) sticks]
225 EXCAVATOR HYDRAULIC SYSTEM
225 Excavator Boom, Bucket And Stick Control Groups<BR> [Two piece boom - 2.44 mm (8 ft.) and 3.0 m (10 ft.) sticks]
225 EXCAVATOR HYDRAULIC SYSTEM
Disassembly and Assembly
Swing Brake
225 EXCAVATOR VEHICLE SYSTEMS
Swing Brake
225 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
New Seal Used In Pilot Control Valve{5452,5059}
1980/03/24
New Rod Ends And Supports Used In Hydraulic Control Groups{5452}
1983/10/17
New Lip-Type Seal Helps Prevent Leaks In Hydraulic Control Valve Groups{5050}
1984/06/11
Checking And Adjusting Travel Drift{5058,5063}
1984/08/13
Correct Position Of O-ring Seals And Back-Up Rings In Pump Control Head Group{5070}
1984/10/08
New Pilot Valves Used{5059}
1984/12/10
Hydraulic System Specifications And Guidelines For Analysis Of Pump Control Circuits{5050,5450}
1977/02/21
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Different Rod Ends Can Be Used In Control Linkage For Pilot Valve{5063}
1979/02/19
Loose Orifices Or Ones Not Installed In Main Hydraulic Control Valves Can Cause Track Chatter{5451,5058,4150,4351}
1979/10/15
Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17
XT-6 Hose Replaces XT-3 Hose In Pilot Lines Group To Prevent Leakage{5059,5057}
1991/06/03
New Spring Retainer Used In Main Hydraulic Control Valves{5051}
1994/09/26
New Service Parts Required For Pilot Valve Groups Controlling Lift And Tilt Functions{5059,5123,5125,5126,5136}
1996/07/29

Caterpillar Parts SIS Catalog 225 :

CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.