AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 5 OF 5-TYPE 1 SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE FIELD REPLACEMENT FOR 4V9221-PAGE 154B 3G0302-PAGE 152, 9J7903-PAGE 154 AN ATTACHMENT 225


OPERATOR STATION
CONTROL GP-HYDRAULIC

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
 

#SEBP12260690
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 5 OF 5-TYPE 1
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
3G0302-PAGE 152, 9J7903-PAGE 154
AN ATTACHMENT
c183085 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0302 Y [1] PUMP GROUP  
    (Separate Illustration)
  7J-8114 [1] GASKET  
2. 6H-1717 [2] BOLT  
3. 5P-7213 [6] WASHER  
4. 4V-6834 [1] HOSE ASSEM.  
  9S-0247 H HOSE 33.86in.(.86 m)  
5. 1P-1711 [1] COUPLING ASSEM. (90 DEGREES)  
6. 8S-3759 [1] COUPLING ASSEM. (straight)  
7. 3S-7166 [2] SLEEVE  
8. 030-7944 [1] ELBOW  
9. 3D-2824 [2] SEAL  
10. 8J-5914 [1] PLUG  
  2S-4078 [1] SEAL  
11. 5P-6719 [1] PLUG  
  3J-1907 [1] SEAL  
12. 4V-6836 [1] ADAPTER  
  4J-0520 [1] SEAL  
13. 9J-7903 Y [1] PUMP GROUP  
    (Separate Illustration)
  1H-6227 [1] SEAL  
14. 0S-1595 [4] BOLT  
15. 030-7950 [1] ELBOW  
16. 4B-1229 [2] SCREW  
  4B-2047 [2] NUT  
  2H-2615 [2] WASHER  
17. 1P-5976 [1] RELAY ASSEM.  
18. 7V-1108 [1] BRACKET  
19. 7N-9179 [2] SWITCH GROUP  
    (Each Includes)
20. 2G-3903 [1] SWITCH  
21. 7N-9180 [1] SWITCH (auxiliary)  
22. 3V-1965 [2] ADAPTER  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260691
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 1 OF 5-TYPE 2
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c311605 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-0547 [1] ELBOW  
2. 1P-4577 [6] FLANGE-HALF  
  4J-0520 [3] SEAL  
3. 8S-9191 [4] BOLT  
4. 5M-2894 [12] WASHER  
5. 7V-0725 [1] HOSE AS  
  8S-9355 G HOSE (1.11M)  
  3S-8497 [1] STEM AS-COLLET (22.5 DEG.)  
6. 3S-8502 [1] STEM AS-COLLET (67.5 DEG.)  
7. 3S-7252 [2] SLEEVE  
8. 1D-4569 [2] BOLT  
9. 5P-8245 [10] WASHER  
10. 7V-0700 [1] SPACER  
11. 0L-1352 [4] BOLT  
  1D-4717 [4] NUT  
12. 8K-0248 [1] BLOCK  
13. 2A-1531 [4] BOLT  
14. [1] DOOR-BRUSH GUARD  
  1H-7339 [1] SEAL-O-RING  
15. 3V-8860 [1] ADAPTER  
  5H-8848 [1] SEAL-O-RING  
16. 3H-5368 [16] BOLT  
17. 5P-8244 [16] WASHER  
18. 1P-4578 [8] FLANGE  
  4J-0522 [4] SEAL  
19. 1D-4615 [2] BOLT  
  5P-8248 [2] WASHER-HARD  
20. 7B-3235 [4] BOLT  
21. 2V-1696 [1] HOSE AS (33.86IN.)  
22. 4V-6019 [1] HOSE AS (42.52IN.)  
23. 5V-8351 [2] PIPE  
  2V-0936 [4] WASHER  
  G   ORDER BY THE INCH
 

#SEBP12260692
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 2 OF 5-TYPE 2
SERIAL NO. 51U4399 TO 51U4267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
3G7255-PAGE 154S
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c312366 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-7255 Y [1] VALVE GP.  
2. [1] COVER  
3. 0S-0509 [6] BOLT  
4. 5P-1075 [6] WASHER  
5. 7V-0707 [1] SUPPORT AS.  
6. 8D-0894 [2] BLOCK  
7. 7K-1181 [4] STRAP  
8. 7V-0732 [1] WIRE AS.  
  5P-5623 BD WIRE (16 GAUGE)  
9. 6N-9587 [1] CONNECTOR  
10. 5P-5610 [1] CONNECTOR  
11. 8F-9836 C [4] LUG  
12. 7D-1728 [4] CLIP  
  0T-0102 [4] BOLT  
13. 2D-7689 [2] CLAMP  
  7V-0695 [2] BLOCK  
14. 0S-1619 [4] BOLT  
15. 1D-4717 [10] NUT  
16. 5M-2894 [24] WASHER  
17. 7V-0721 [1] HOSE AS.  
  8S-9355 G HOSE 33.86IN.(.86M)  
18. 3S-7252 [2] SLEEVE  
19. 3S-8498 [2] STEM AS.  
20. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
21. 7V-0698 [1] ANGLE AS.  
22. 0T-0573 [4] BOLT  
23. 2P-1281 [1] UNION  
  7F-2050 [1] LOCKNUT  
24. 1P-4577 [4] FLANGE  
  4J-0520 [3] SEAL  
25. 7V-0719 [1] HOSE AS.  
  9S-0671 G HOSE 50IN. (1.27M)  
26. 8S-4055 [2] COUPLING AS.  
27. 3S-8606 [2] SLEEVE  
28. 7V-0697 [1] PLATE (R.H.)  
  7V-0696 [1] PLATE (L.H.)  
29. 4S-1962 C [4] CLIP  
30. 0S-1591 [4] BOLT  
31. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
  3K-0360 [1] SEAL  
32. 0S-1626 [2] BOLT  
  5P-8248 [2] WASHER  
  B   USE AS REQUIRED
  C   INDICATES CHANGE
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
  G   ORDER BY THE INCH
 

#SEBP12260693
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 3 OF 5-TYPE 2
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c312260 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7226 [4] BOLT  
2. 5P-8244 [12] WASHER  
3. 7V-0724 [1] HOSE AS.  
  8S-9355 G HOSE 24.8IN.(.63M)  
  7S-0573 [1] STEM AS. (45 DEG.)  
4. 3S-7252 [2] SLEEVE  
5. 3S-8501 [1] STEM AS. (60 DEG.)  
6. 7V-0722 [1] HOSE AS.  
  8S-9355 G HOSE 35.83IN.(.91M)  
7. 3S-8498 [2] STEM AS.  
8. 3S-7252 [2] SLEEVE  
9. 2V-1724 [1] TUBE AS.  
10. 9S-4184 [1] PLUG  
  3D-2824 [1] SEAL  
11. 0T-0573 C [4] BOLT  
12. 1D-4717 [6] NUT  
13. 1P-4577 [6] FLANGE  
  4J-0520 [4] SEAL  
14. 2P-1281 [1] UNION  
  7F-2050 [1] LOCKNUT  
15. 7V-0699 [1] ANGLE AS.  
16. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
  5P-1075 [2] WASHER  
17. 2G-3738 [1] HOSE AS.  
  9S-0671 G HOSE 55.91IN.(1.42M)  
18. 8S-4055 [2] COUPLING AS.  
19. 3S-8606 [2] SLEEVE  
20. 1P-3705 [2] SEAL  
21. 0T-0768 [4] BOLT  
22. 4D-6267 [1] BLOCK  
23. 0S-1591 [4] BOLT  
24. 5M-2894 C [16] WASHER  
25. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
  3K-0360 [1] SEAL  
26. 0T-0772 [8] BOLT  
  1P-4578 [4] FLANGE  
  4J-0522 [2] SEAL  
27. 7V-0723 [1] HOSE AS.  
  8S-9355 G HOSE 19.29IN.(.49M)  
  3S-8497 [1] STEM AS. (22.5 DEG.)  
28. 3S-7252 [2] SLEEVE  
29. 7S-0572 [1] STEM AS. (30 DEG.)  
30. 0S-1588 [4] BOLT  
31. 9N-5613 C [1] HOSE AS. 110CM (43.3IN.)  
  6K-9194 [1] ELBOW  
  1P-1441 [1] NUT  
  030-8144 [1] REDUCER  
32. 030-7947 C [1] ELBOW  
  3J-1907 [1] SEAL  
  C   INDICATES CHANGE
  G   ORDER BY THE INCH
 

#SEBP12260694
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 4 OF 5-TYPE 2
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
AN ATTACHMENT
c311606 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-6936 [1] REDUCER-FLARED  
  1P-1441 [1] NUT-FLARED  
2. 8M-0547 [1] ELBOW  
3. 2P-8130 [2] TEE-UNION  
4. 7F-2050 [2] LOCKNUT  
  1F-4166 [2] WASHER  
   
5. 9D-7032 [1] SWITCH AS (OIL PRESS.)  
6. 3B-7722 [1] BUSHING  
7. 5P-8018 [1] UNION-ADAPTER  
8. 2V-0152 [1] HOSE AS (77.56IN.)  
  2R-6806 [1] CONNECTOR  
  3J-1907 [1] SEAL  
9. 2P-1278 [1] UNION-BULKHEAD  
  2P-1279 [1] LOCKNUT  
   
10. 2V-8679 [1] HOSE AS (31.1IN.)  
11. 7V-1109 [1] HARNESS AS  
  5P-5623 BD WIRE (16 GAUGE)  
12. 2L-8076 [1] TERMINAL (RELAY A1)  
  2L-8074 [2] TERMINAL  
    (RELAY X1, X2)
  2L-8066 [1] TERMINAL (RELAY A2)  
13. 2L-8067 [1] TERMINAL (GROUND)  
14. 5P-3161 [1] CONNECTOR  
15. 7K-1181 C [7] STRAP-CABLE  
16. 2V-9473 [1] DIODE AS  
17. 7V-1110 [1] HARNESS AS  
  5P-5623 BD WIRE (16 GAUGE)  
18. 2L-8075 [2] TERMINAL  
19. 7V-0733 [1] WIRE AS  
  5P-5623 BD WIRE (16 GAUGE)  
  6N-9587 [4] CONNECTOR (SOLENOID)  
  7V-1107 F [1] WIRE AS  
    (TO CONSOLE HARNESS)
  3G-7382 F [1] PLUG-ORIFICE  
  F [1] ENVELOPE (PACKAGED  
    WITH LITERATURE GP.)
    (INSTALLING
    GRAPPLE CONTROL)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
 

#SEBP12260695
 

8V-0500: CONTROL GP-GRAPPLE

8V0500 GRAPPLE CONTROL GROUP-TANDEM CENTER-PART 5 OF 5-TYPE 2
SERIAL NO. 51U4399 TO 51U5267 INCLUSIVE & 61X398 TO 61X410 INCLUSIVE
FIELD REPLACEMENT FOR 4V9221-PAGE 154B
3G0302-PAGE 152, 9J7903-PAGE 154
AN ATTACHMENT
c183085 SEBP1226
8V0500 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0302 Y [1] PUMP GROUP  
    (Separate Illustration)
  7J-8114 [1] GASKET  
2. 6H-1717 [2] BOLT  
3. 5P-7213 [6] WASHER  
4. 4V-6834 [1] HOSE ASSEM.  
  9S-0247 H HOSE 33.86in.(.86 m)  
5. 1P-1711 [1] COUPLING ASSEM. (90 DEGREES)  
6. 8S-3759 [1] COUPLING ASSEM. (straight)  
7. 3S-7166 [2] SLEEVE  
8. 030-7944 [1] ELBOW  
9. 3D-2824 [2] SEAL  
10. 8J-5914 [1] PLUG  
  2S-4078 [1] SEAL  
11. 5P-6719 [1] PLUG  
  3J-1907 [1] SEAL  
12. 4V-6836 [1] ADAPTER  
  4J-0520 [1] SEAL  
13. 9J-7903 Y [1] PUMP GROUP  
    (Separate Illustration)
  1H-6227 [1] SEAL  
14. 0S-1595 [4] BOLT  
15. 030-7950 [1] ELBOW  
16. 4B-1229 [2] SCREW  
  4B-2047 [2] NUT  
  2H-2615 [2] WASHER  
17. 1P-5976 [1] RELAY ASSEM.  
18. 7V-1108 [1] BRACKET  
19. 7N-9179 [2] SWITCH GROUP  
    (Each Includes)
20. 2G-3903 [1] SWITCH  
21. 7N-9180 [1] SWITCH (auxiliary)  
22. 3V-1965 [2] ADAPTER  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260696
 

9V-9301: CONTROL GP-GRAPPLE

9V9301 CONTROL GP-GRAPPLE-PART 1 OF 5
TANDEM CENTER-TYPE 1, S/N 51U5268-6257 & 61X411-413
FOR FIELD CONVERSION
c318665 SEBP1226
9V9301 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-0547 [1] ELBOW  
2. 1P-4577 [6] FLANGE-HALF  
  4J-0520 [3] SEAL  
3. 8S-9191 [4] BOLT  
4. 5M-2894 [16] WASHER  
5. 7V-0725 [1] HOSE AS  
  8S-9355 G HOSE (1.11M)  
  3S-8497 [1] STEM AS-COLLET (22.5 DEGREE)  
6. 3S-8502 [1] STEM AS-COLLET (67.5 DEGREE)  
7. 3S-7252 [2] SLEEVE  
8. 1D-4569 [2] BOLT  
9. 5P-8245 [10] WASHER  
10. 7V-0700 [1] SPACER  
11. 0L-1352 [4] BOLT  
12. 1D-4717 [4] NUT  
13. 2A-1531 [4] BOLT  
14. 2V-1699 [1] ELBOW  
  1H-7339 [1] SEAL-O-RING  
15. 3V-8860 [1] ADAPTER  
  5H-8848 [1] SEAL-O-RING  
16. 3H-5368 [16] BOLT  
17. 5P-8244 [16] WASHER  
18. 1P-4578 [8] FLANGE  
  4J-0522 [4] SEAL  
19. 1D-4615 [2] BOLT  
  5P-8248 [2] WASHER-HARD  
20. 7B-3235 [4] BOLT  
21. 2V-1696 [1] HOSE AS (33.86IN.)  
22. 4V-6019 [1] HOSE AS (42.52IN.)  
23. 5V-8351 [2] PIPE  
  2V-0936 [4] WASHER  
24. 7V-0696 [1] PLATE  
  7V-0697 [1] PLATE  
25. 8F-9836 [4] LUG  
26. 8K-0248 [1] BLOCK  
27. 4D-6267 [1] BLOCK  
  G   ORDER BY THE INCH
 

#SEBP12260697
 

9V-9301: CONTROL GP-GRAPPLE

9V9301 CONTROL GP-GRAPPLE-PART 2 OF 5
TANDEM CENTER-TYPE 1, S/N 51U5268-6257 & 61X411-413
3G7255-PAGE 154S
FOR FIELD CONVERSION
c318666 SEBP1226
9V9301 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-7255 Y [1] VALVE GP  
    (GRAPPLE & ROTOR CONTROL)
   
2. 7V-0711 [1] COVER  
3. 0S-0509 [6] BOLT  
4. 5P-1075 [12] WASHER-HARD  
5. 7V-0707 [1] SUPPORT AS  
6. 8D-0894 [2] BLOCK  
7. 7K-1181 [4] STRAP-CABLE  
   
8. 7V-0732 [1] WIRE AS  
  5P-5623 BD WIRE (16 GAUGE)  
9. 6N-9587 [1] CONNECTOR  
10. 5P-5610 [1] CONNECTOR  
11. 7D-1728 [4] CLIP  
12. 0T-0102 [4] BOLT  
13. 2D-7689 [2] CLAMP-HOSE  
  7V-0695 [2] BLOCK  
14. 0S-1619 [4] BOLT  
15. 1D-4717 [10] NUT  
16. 5M-2894 [24] WASHER  
17. 7V-0721 [1] HOSE AS  
  8S-9355 G HOSE (.86M)  
18. 3S-7252 [2] SLEEVE  
19. 3S-8498 [2] STEM AS-COLLET  
20. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
21. 7V-0698 [1] ANGLE AS  
22. 0T-0573 [4] BOLT  
23. 2P-1281 [1] UNION-BULKHEAD  
  7F-2050 [1] LOCKNUT  
24. 1P-4577 [4] FLANGE-HALF  
  4J-0520 [2] SEAL  
25. 7V-0719 [1] HOSE AS  
  9S-0671 G HOSE (1.27M)  
26. 8S-4055 [2] COUPLING AS  
27. 3S-8606 [2] SLEEVE  
28. 0S-1626 [2] BOLT  
  5P-8248 [2] WASHER-HARD  
29. 4S-1962 [4] CLIP  
30. 0S-1591 [4] BOLT  
31. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
32. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP12260698
 

9V-9301: CONTROL GP-GRAPPLE

9V9301 CONTROL GP-GRAPPLE-PART 3 OF 5
TANDEM CENTER-TYPE 1, S/N 51U5268-6257 & 61X411-413
FOR FIELD CONVERSION
c318667 SEBP1226
9V9301 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7226 [4] BOLT  
2. 5P-8244 [12] WASHER  
   
3. 7V-0724 [1] HOSE AS  
  8S-9355 G HOSE (.63M)  
  7S-0573 [1] STEM AS (45 DEGREE)  
4. 3S-7252 [2] SLEEVE  
5. 3S-8501 [1] STEM AS-COLLET (60 DEGREE)  
6. 7V-0722 [1] HOSE AS  
  8S-9355 G HOSE (.91M)  
7. 3S-8498 [2] STEM AS-COLLET  
8. 3S-7252 [2] SLEEVE  
   
9. 2V-1724 [1] TUBE AS  
10. 9S-4184 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
11. 0T-0573 [4] BOLT  
12. 1D-4717 [6] NUT  
13. 1P-4577 [6] FLANGE-HALF  
  4J-0520 [4] SEAL  
14. 2P-1281 [1] UNION-BULKHEAD  
  7F-2050 [1] LOCKNUT  
15. 7V-0699 [1] ANGLE AS  
16. 7V-0705 [1] SPACER  
  1A-2029 [2] BOLT  
  5P-1075 [2] WASHER-HARD  
17. 2G-3738 [1] HOSE AS  
  9S-0671 G HOSE (1.42M)  
18. 8S-4055 [2] COUPLING AS  
19. 3S-8606 [2] SLEEVE  
20. 1P-3705 [2] SEAL  
21. 0T-0768 [4] BOLT  
22. 0S-1588 [4] BOLT  
23. 0S-1591 [4] BOLT  
24. 5M-2894 [12] WASHER  
25. 8M-0547 [1] ELBOW  
  8M-0505 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
26. 0T-0772 [8] BOLT  
  1P-4578 [4] FLANGE  
  4J-0522 [2] SEAL  
27. 7V-0723 [1] HOSE AS  
  8S-9355 G HOSE (.49M)  
  3S-8497 [1] STEM AS-COLLET (22.5 DEGREE)  
28. 3S-7252 [2] SLEEVE  
29. 7S-0572 [1] STEM AS (30 DEGREE)  
30. 9N-5613 [1] HOSE AS (43.3IN.)  
31. 6K-9194 [1] ELBOW  
  030-8144 [1] REDUCER-FLARED  
  1P-1441 [1] NUT-FLARED  
32. 030-7947 [1] ELBOW  
  3J-1907 [1] SEAL  
  G   ORDER BY THE INCH
 

#SEBP12260699
 

9V-9301: CONTROL GP-GRAPPLE

9V9301 CONTROL GP-GRAPPLE-PART 4 OF 5
TANDEM CENTER-TYPE 1, S/N 51U5268-6257 & 61X411-413
9V8602-PAGE 154X.04, 9V8889-PAGE 154X.05
FOR FIELD CONVERSION
c318668 SEBP1226
9V9301 CONTROL GP-GRAPPLE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9V-8602 Y [1] HARNESS AS  
2. 6S-5693 [1] TEE  
3. 2P-8130 [1] TEE-UNION  
4. 7F-2050 [1] LOCKNUT  
  1F-4166 [1] WASHER  
   
5. 9D-7032 [1] SWITCH AS (OIL PRESSURE)  
6. 3B-7722 [1] BUSHING  
7. 5P-8018 [1] UNION-ADAPTER  
8. 2V-0152 [1] HOSE AS (77.56IN.)  
  2R-6806 [1] CONNECTOR  
  3J-1907 [1] SEAL  
9. 2P-1278 [1] UNION-BULKHEAD  
  2P-1279 [1] LOCKNUT  
   
10. 9V-8856 [1] TUBE AS  
11. 9V-8889 Y [2] HARNESS AS  
12. 7K-1181 [5] STRAP-CABLE  
13. 2V-9473 [1] DIODE AS  
14. 7V-1110 [1] HARNESS AS  
  5P-5623 BD WIRE (16 GAUGE)  
15. 2L-8075 [2] TERMINAL  
16. 7V-0733 [1] WIRE AS  
  5P-5623 BD WIRE (16 GAUGE)  
  6N-9587 [4] CONNECTOR (SOLENOID)  
  9V-9293 F [1] WIRE AS  
    (TO CONSOLE HARNESS)
  3G-7382 F [1] PLUG-ORIFICE  
  F [1] ENVELOPE (PACKAGED  
    WITH LITERATURE GP.)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation Of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Installation Of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Parts List For Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Parts List For Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Parts List for Installation of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Parts List for Installation of Pilot Valve Service Groups (Field Conversion){5059, 5465, 5466}
Installation Of 8V500 Grapple Control Group{6500}
Installation Of 8V500 Grapple Control Group{6500}
Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Installation Of Field Conversion Stick Check Valve Lines Group And Increased Pressure Control Group{5450}
Specifications
Boom Speed Control<BR> (8J2429)
225 EXCAVATOR HYDRAULIC SYSTEM
225 Excavator Boom, Bucket And Stick Control Groups<BR> [One piece boom - 2.44 m (8 ft.) and 3.0 m (10 ft) sticks]
225 EXCAVATOR HYDRAULIC SYSTEM
225 Excavator Boom, Bucket And Stick Control Groups<BR> [Two piece boom - 2.44 mm (8 ft.) and 3.0 m (10 ft.) sticks]
225 EXCAVATOR HYDRAULIC SYSTEM
Disassembly and Assembly
Swing Brake
225 EXCAVATOR VEHICLE SYSTEMS
Swing Brake
225 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
New Seal Used In Pilot Control Valve{5452,5059}
1980/03/24
New Rod Ends And Supports Used In Hydraulic Control Groups{5452}
1983/10/17
New Lip-Type Seal Helps Prevent Leaks In Hydraulic Control Valve Groups{5050}
1984/06/11
Checking And Adjusting Travel Drift{5058,5063}
1984/08/13
Correct Position Of O-ring Seals And Back-Up Rings In Pump Control Head Group{5070}
1984/10/08
New Pilot Valves Used{5059}
1984/12/10
Hydraulic System Specifications And Guidelines For Analysis Of Pump Control Circuits{5050,5450}
1977/02/21
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Different Rod Ends Can Be Used In Control Linkage For Pilot Valve{5063}
1979/02/19
Loose Orifices Or Ones Not Installed In Main Hydraulic Control Valves Can Cause Track Chatter{5451,5058,4150,4351}
1979/10/15
Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17
XT-6 Hose Replaces XT-3 Hose In Pilot Lines Group To Prevent Leakage{5059,5057}
1991/06/03
New Spring Retainer Used In Main Hydraulic Control Valves{5051}
1994/09/26
New Service Parts Required For Pilot Valve Groups Controlling Lift And Tilt Functions{5059,5123,5125,5126,5136}
1996/07/29

Caterpillar Parts SIS Catalog 225 :

CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
4V-9221 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
8V-0500 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
9V-9301 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
9V-9301 CONTROL GP-GRAPPLE
CONTROL GP-GRAPPLE
9V-9301 CONTROL GP-GRAPPLE

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.