AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J6773 PISTON MOTOR GROUP-2 REQUIRED-PART 1 OF 2 S/N 51U2832-UP. 6J9277-PAGE 216 PART OF 3V9713 FRAME-UNDERCARRIAGE AN ATTACHMENT 225


HYDRAULIC SYSTEM
MOTOR GP

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

HYDRAULIC SYSTEM

MOTOR GP
MOTOR GP-PISTON-LINK
9T-0999 MOTOR GP-PISTON-LINK
SHAFT GP
9T-2282 SHAFT GP
MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
3G-3843 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
3G-3843 MOTOR GP-PISTON-LINK
 

#SEBP12261110
 

8J-6773: MOTOR GP-PISTON-LINK

8J6773 PISTON MOTOR GROUP-2 REQUIRED-PART 1 OF 2
S/N 51U2832-UP. 6J9277-PAGE 216
PART OF 3V9713 FRAME-UNDERCARRIAGE
AN ATTACHMENT
c173182 SEBP1226
8J6773 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-6776 [1] BODY  
2. 8D-0648 [8] BOLT  
3. 8J-6277 [1] SHIM 1.245 mm(.049 in.) thick  
  8J-6278 [5] SHIM .0762 mm(.003 in.) thick  
  8J-6279 [5] SHIM .1270 mm(.005 in.) thick  
4. 8J-6239 [1] LOCK  
5. 8J-6723 [1] BODY  
6. 9S-8006 [2] PLUG  
  2M-9780 [2] SEAL  
7. 4B-4158 [4] SCREW  
8. 8J-2559 [1] PLATE  
9. 8J-6872 [1] HEAD ASSEM.  
10. 6J-2999 [2] PLUG  
11. 5J-9393 [12] BOLT  
12. 3G-1766 H [1] COVER  
13. 0S-1618 [10] BOLT  
14. 7F-8268 [1] SEAL  
15. 5H-6005 [3] SEAL  
16. 6J-9277 Y [1] VALVE GROUP  
    (Separate Illustration)
17. 1B-9575 [4] BOLT  
18. 7H-3937 [14] LOCKWASHER  
19. 6F-4718 [1] SEAL  
20. 9M-5024 [1] SEAL  
21. 9J-0747 [1] BEARING ASSEM.  
22. 1H-5338 [1] CUP  
  2K-5097 [1] CONE  
23. 3F-5792 [1] SEAL  
24. 3G-5940 C [1] NUT  
25. 8J-6242 [1] SEAL  
26. 8J-6869 [1] RETAINER  
  H   NOT PART OF 8J6773 MOTOR GROUP
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP12261111
 

8J-6773: MOTOR GP-PISTON-LINK

8J6773 PISTON MOTOR GROUP-2 REQUIRED-PART 2 OF 2
S/N 51U2832-UP
PART OF 3V9713 FRAME-UNDERCARRIAGE
AN ATTACHMENT
c314092 SEBP1226
8J6773 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3836 C [1] PLATE ASSEM.  
    (Includes)
  3G-3739 [9] INSERT  
2. 5H-3182 C [1] PIN  
3. 8J-0438 [1] SPRING  
4. 3G-4605 C [1] JOINT ASSEM.  
    (Includes)
  2R-1256 [2] RING  
5. 8J-6244 [1] RACE AND ROLLER ASSEM. (outer)  
  8J-6243 [1] RACE (inner)  
6. 9J-8052 [1] RETAINER  
7. 6J-7846 [3] RACE  
8. 9J-5691 [1] SHAFT  
9. 3S-6867 [1] BEARING  
10. 6J-7855 [2] RING  
11. 3G-2629 [1] RETAINER  
12. 8J-6273 [9] RING  
13. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
14. 9J-5716 [1] TUBE  
15. 8J-6241 [1] SPRING  
16. 8J-6274 [1] RING  
17. 9J-8643 R [9] PISTON ASSEM.  
    (Each Includes)
18. 8J-6276 [1] RETAINER  
19. 6J-7836 [1] RING  
20. 9J-8051 [1] RETAINER  
21. 6J-7854 [1] RING  
22. 8J-6699 [1] BARREL  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261112
 

3G-3843: MOTOR GP-PISTON-LINK

3G3843 PISTON ON MOTOR GROUP-2 REQUIRED-PART 1-TYPE 1
SERIAL NO. 51U2832-UP. PART OF 3V9713 UNDERCARRIAGE FRAME ARRANGEMENT
LISTED ON PAGE 116 3G3253 VALVE PARTS ARE SHOWN ON PAGE 216A.
AN ATTACHMENT
c225371 SEBP1226
3G3843 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1618 [6] BOLT  
2. 9M-1974 [6] WASHER  
3. 8J-6869 [1] RETAINER  
4. 3G-3098 [1] BODY  
5. 9S-9739 [16] BOLT 68.5 mm(2.7 in.) long  
6. 3G-5755 [1] PLATE ASSEM.  
    (Includes)
  3G-3739 [9] INSERT  
7. 8J-6239 [1] LOCK  
8. 3G-3102 [1] BODY  
9. 9S-8008 [2] PLUG  
  3D-2824 [2] SEAL  
10. 4B-4158 [4] SCREW  
11. 8J-2559 [1] PLATE (caution)  
12. 3G-3841 [1] HEAD ASSEM.  
    (Includes)
13. 8J-6882 [4] PLUG  
14. 1B-9575 [4] BOLT  
15. 3G-3253 Y [1] VALVE GROUP  
    (Separate Illustration)
16. 7F-8268 [1] SEAL  
17. 5J-9393 [4] BOLT 95.2 mm(3.7 in.) long  
18. 3G-5940 [1] NUT  
19. 9J-0747 [1] BEARING ASSEM.  
20. 1H-5338 [1] CUP  
  2K-5097 [1] CONE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12261113
 

3G-3843: MOTOR GP-PISTON-LINK

3G3843 PISTON MOTOR GROUP-2 REQUIRED-PART 2-TYPE 1
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME ARRANGEMENT LISTED ON PAGE 116.
AN ATTACHMENT
c225372 SEBP1226
3G3843 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-7854 [1] RING  
2. 8J-6244 [1] RACE & ROLLER ASSEM. (outer)  
  8J-6243 [1] RACE (inner)  
3. 6J-7855 [2] RING  
4. 8J-6274 [1] RING  
5. 6J-7846 [3] RACE  
6. 3G-3163 [1] SHAFT  
7. 5H-6005 [3] SEAL  
8. 0S-1618 [2] BOLT  
9. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
10. 3G-2629 [1] RETAINER  
11. 9J-5716 [1] TUBE  
  8J-0438 [1] SPRING  
12. 9D-8042 [1] SEAL  
13. 3G-4530 [1] SPRING  
14. 3S-6867 [1] BEARING  
15. 9J-8052 [1] RETAINER  
16. 3G-5827 [9] PISTON ASSEM.  
    (Each Includes)
17. 8J-6276 [1] RETAINER  
18. 6J-7836 [1] RING  
19. 9J-8051 [1] RETAINER  
20. 3G-3741 [1] BARREL ASSEM.  
21. 1J-2176 [1] SEAL  
22. 8J-6273 [9] RING  
23. 3F-5792 [1] SEAL  
24. 5H-3182 [1] PIN  
25. 3G-4605 [1] JOINT ASSEM.  
    (Includes)
  2R-1256 [2] RING  
26. 8J-6277 H [1] SHIM 1.245 mm(.049 in.) thick  
  8J-6278 H [5] SHIM .0762 mm(.003 in.) thick  
  8J-6279 H [5] SHIM .1270 mm(.005 in.) thick  
27. 8J-6242 [1] SEAL  
  H   USE AS REQUIRED
 

#SEBP12261114
 

3G-3843: MOTOR GP-PISTON-LINK

3G3843 PISTON MOTOR GROUP-2 REQUIRED-PART 1-TYPE 2
SERIAL NO. 51U2832-UP. PART OF 3V9713 UNDERCARRIAGE FRAME ARRANGEMENT
LISTED ON PAGE 116 3G3253 VALVE PARTS ARE SHOWN ON PAGE 216A.
AN ATTACHMENT
c225371 SEBP1226
3G3843 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1618 [6] BOLT  
2. 9M-1974 [6] WASHER  
3. 8J-6869 [1] RETAINER  
4. 3G-3098 [1] BODY  
5. 9S-9739 [16] BOLT 68.5 mm(2.7 in.) long  
6. 3G-5755 [1] PLATE ASSEM.  
    (Includes)
  3G-3739 [9] INSERT  
7. 8J-6239 [1] LOCK  
8. 3G-3102 [1] BODY  
9. 9S-8008 [2] PLUG  
  3D-2824 [2] SEAL  
10. 4B-4158 [4] SCREW  
11. 8J-2559 [1] PLATE (caution)  
12. 3G-3841 [1] HEAD ASSEM.  
    (Includes)
13. 8J-6882 [4] PLUG  
14. 1B-9575 [4] BOLT  
15. 3G-3253 Y [1] VALVE GROUP  
    (Separate Illustration)
16. 7F-8268 [1] SEAL  
17. 5J-9393 [4] BOLT 95.2 mm(3.7 in.) long  
18. 3G-5940 [1] NUT  
19. 9J-0747 [1] BEARING ASSEM.  
20. 1H-5338 [1] CUP  
  2K-5097 [1] CONE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12261115
 

3G-3843: MOTOR GP-PISTON-LINK

3G3843 PISTON MOTOR GROUP-2 REQUIRED-PART 2-TYPE 2
SERIAL NO. 51U2832-UP
PART OF 3V9713 UNDERCARRIAGE FRAME ARRANGEMENT LISTED ON PAGE 116.
AN ATTACHMENT
c226533 SEBP1226
3G3843 MOTOR GP-PISTON-LINK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-7854 [1] RING  
2. 8J-6244 [1] RACE & ROLLER ASSEM. (outer)  
  8J-6243 [1] RACE (inner)  
3. 6J-7855 [2] RING  
4. 8J-6274 [1] RING  
5. 6J-7846 [3] RACE  
6. 1U-2031 C [1] SHAFT  
7. 5H-6005 [3] SEAL  
8. 0S-1618 [2] BOLT  
9. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
10. 3G-2629 [1] RETAINER  
11. 9J-5716 [1] TUBE  
  8J-0438 [1] SPRING  
12. 9D-8042 [1] SEAL  
13. 3G-4530 [1] SPRING  
14. 3S-6867 [1] BEARING  
15. 9J-8052 [1] RETAINER  
16. 3G-5827 [9] PISTON ASSEM.  
    (Each Includes)
17. 8J-6276 [1] RETAINER  
18. 6J-7836 [1] RING  
19. 9J-8051 [1] RETAINER  
20. 1U-2035 C [1] BARREL ASSEM.  
21. 1J-2176 [1] SEAL  
22. 8J-6273 [9] RING  
23. 3F-5792 [1] SEAL  
24. 5H-3182 [1] PIN  
25. 3G-4605 [1] JOINT ASSEM.  
    (Includes)
  2R-1256 [2] RING  
26. 8J-6277 H [1] SHIM 1.245 mm(.049 in.) thick  
  8J-6278 H [5] SHIM .0762 mm(.003 in.) thick  
  8J-6279 H [5] SHIM .1270 mm(.005 in.) thick  
27. 8J-6242 [1] SEAL  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP12261116
 

1U-2778: MOTOR GP-PISTON

1U2778 PISTON MOTOR GROUP-2 REQUIRED-PART 1 OF 2
REPLACED BY 4T3068-PAGE 211G
S/N 51U2832-UP
PART OF 3V9713 FRAME-UNDERCARRIAGE. AN ATTACHMENT
c232677 SEBP1226
1U2778 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-7854 [1] RING  
2. 8J-6244 [1] RACE & ROLLER ASSEM. (outer)  
  8J-6243 [1] RACE (inner)  
3. 6J-7855 [2] RING  
4. 8J-6274 [1] RING  
5. 6J-7846 [3] RACE  
6. 3G-9680 [1] SHAFT  
7. 5H-6005 [3] SEAL  
8. 0S-1618 [2] BOLT  
9. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
10. 3G-2629 [1] RETAINER  
11. 9J-5716 [1] TUBE  
  8J-0438 [1] SPRING  
12. 9D-8042 [1] SEAL  
13. 3G-4530 [1] SPRING  
14. 3S-6867 [1] BEARING  
15. 9J-8052 [1] RETAINER  
16. 3G-5827 [9] PISTON ASSEM.  
    (Each Includes)
17. 8J-6276 [1] RETAINER  
18. 6J-7836 [1] RING  
19. 9J-8051 [1] RETAINER  
20. 1U-2035 [1] BARREL ASSEM.  
21. 1J-2176 [1] SEAL  
22. 8J-6273 [9] RING  
23. 3F-5792 [1] SEAL  
24. 5H-3182 [1] PIN  
25. 3G-4605 [1] JOINT ASSEM.  
    (Includes)
  2R-1256 [2] RING  
26. 8J-6277 H [1] SHIM 1.245 mm(.049 in.) thick  
  8J-6278 H [5] SHIM .0762 mm(.003 in.) thick  
  8J-6279 H [5] SHIM .1270 mm(.005 in.) thick  
27. 8J-6242 [1] SEAL  
28. 1U-2675 [1] PLATE  
  H   USE AS REQUIRED
 

#SEBP12261117
 

1U-2778: MOTOR GP-PISTON

1U2778 PISTON MOTOR GROUP-2 REQUIRED-PART 2 OF 2
REPLACED BY 4T3068-PAGE 211G
S/N 51U2832-UP. 3G3253-PAGE 216A
PART OF 3V9713 FRAME-UNDERCARRIAGE. AN ATTACHMENT
c232678 SEBP1226
1U2778 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1618 [6] BOLT  
2. 9M-1974 [6] WASHER  
3. 8J-6869 [1] RETAINER  
4. 3G-3098 [1] BODY  
5. 9S-9739 [16] BOLT 68.5 mm(2.7 in.) long  
6. 3G-5755 [1] PLATE ASSEM.  
    (Includes)
  3G-3739 [9] INSERT  
7. 8J-6239 [1] LOCK  
8. 1U-2775 [1] BODY  
9. 9S-8008 [2] PLUG  
  3D-2824 [2] SEAL  
10. 4B-4158 [4] SCREW  
11. 8J-2559 [1] PLATE (caution)  
12. 1U-2777 [1] HEAD ASSEM.  
    (Includes)
13. 8J-6882 [4] PLUG  
14. 1B-9575 [4] BOLT  
15. 3G-3253 Y [1] VALVE GROUP  
    (Separate Illustration)
16. 7F-8268 [1] SEAL  
17. 5J-5794 [4] BOLT 88.9 mm(3.5 in.) long  
18. 3G-5940 [1] NUT  
19. 9J-0747 [1] BEARING ASSEM.  
20. 1H-5338 [1] CUP  
  2K-5097 [1] CONE  
21. 8B-1312 [2] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12261118
 

4T-3068: MOTOR GP-PISTON

4T3068 MOTOR GP-PISTON-PART 1 OF 2
REPLACED BY 9T1208-PAGE 211J
S/N 51U2832-UP. 4T3056-PAGE 216A
PART OF 3V9713 FRAME-UNDERCARRIAGE & 6W9985 & 6W9986 SPECIAL ARS.
AN ATTACHMENT
c311376 SEBP1226
4T3068 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [6] BOLT  
2. 9M-1974 [6] WASHER  
3. 4T-1579 [1] RETAINER  
4. 3G-3098 [1] BODY-LOWER  
5. 9S-9739 [16] BOLT 68.5MM(2.7 IN)LG  
6. 3G-5755 [1] PLATE AS-DRIVE  
  3G-3739 [9] INSERT-BEARING  
7. 8J-6239 [1] LOCK-NUT  
8. 1U-2775 [1] BODY-UPPER  
9. 9S-8008 [2] PLUG-O-RING  
  3D-2824 [2] SEAL-O-RING  
10. 4B-4158 [4] SCREW  
11. 8J-2559 [1] PLATE-CAUTION  
12. 4T-3061 [1] HEAD-MOTOR  
13. 8B-1312 [2] DOWEL  
14. 1B-9575 [4] BOLT  
15. 4T-3056 Y [1] VALVE GP-SHUTTLE  
16. 7F-8268 [1] SEAL-O-RING  
17. 9K-7290 [4] BOLT-12 POINT HEAD 82.55MM(3.25 IN)LG  
18. 3G-5940 [1] NUT  
19. 9J-0747 [1] BEARING AS  
20. 1H-5338 [1] CUP-ROLLER BEARING  
  2K-5097 [1] CONE-ROLLER BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12261119
 

4T-3068: MOTOR GP-PISTON

4T3068 MOTOR GP-PISTON-PART 2 OF 2
REPLACED BY 9T1208-PAGE 211J. S/N 51U2832-UP
PART OF 3V9713 FRAME-UNDERCARRIAGE & 6W9985 & 6W9986 SPECIAL ARS
AN ATTACHMENT
c311377 SEBP1226
4T3068 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2676 [1] RETAINER  
2. 1U-1967 [1] BEARING-ROLLER  
3. 035-2297 [1] RING-RETAINING  
4. 4T-2625 [1] RETAINER  
5. 4T-2675 [1] RACE-THRUST  
6. 4T-3059 [1] SHAFT  
7. 5H-6005 [2] SEAL-O-RING  
8. 0S-1618 [2] BOLT  
9. 0S-1566 [1] BOLT  
  8J-6236 [1] LOCK  
10. 4T-3066 [1] RETAINER  
11. 9J-5716 [1] TUBE  
  8J-0438 [1] SPRING  
12. 9D-8042 [1] SEAL-O-RING  
13. 4T-3055 [1] SPRING  
14. 4T-2603 [1] BEARING-THRUST  
15. 4T-2674 [1] RACE-THRUST  
16. 1U-4805 R [9] PISTON AS  
    (EACH INCLUDES)
17. 8J-6276 [1] RETAINER  
18. 6J-7836 [1] RING-SNAP  
19. 9J-8051 [1] RETAINER  
20. 1U-1965 R [1] BARREL AS-CYLINDER  
21. 1J-2176 [1] SEAL-O-RING  
22. 8J-6273 [9] RING-RETAINING  
23. 3F-5792 [1] SEAL-O-RING  
24. 5H-3182 [1] PIN-SPRING  
25. 3G-4605 [1] UNIVERSAL JOINT AS  
  2R-1256 [2] RING-RETAINING  
26. 8J-6277 B [1] SHIM 1.245MM(.049 IN)THK  
  8J-6278 B [5] SHIM .0762MM(.003 IN)THK  
  8J-6279 B [5] SHIM .1270MM(.005 IN)THK  
27. 8J-6242 [1] SEAL-LIP TYPE  
28. 4T-3064 [1] PLATE-PORT  
29. 7J-4169 [1] RING-SNAP  
30. 0S-0130 [1] PIN  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation Of 3G3843 Motor Group{5058}
Installation Of 3G3843 Motor Group{5058}
Installation Of 3G3739 And 4T3259 Bearing Inserts{4351}
Installation Of 3G3739 And 4T3259 Bearing Inserts{4351}
Installation Of 6W5404 Swing Orifice Service Group{5450}
Installation Of 6W5404 Swing Orifice Service Group{5450}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Track And Swing Motors<BR> (8J448)
225 EXCAVATOR HYDRAULIC SYSTEM
Track And Swing Motors<BR> (9T999)
SUPPLEMENT FOR 225 EXCAVATOR HYDRAULIC PUMPS & MOTORS
Track Motor (9T1208)
SUPPLEMENT FOR HYDRAULIC TRACK MOTOR
Track And Swing Motor<BR> (3G784)
225 EXCAVATOR HYDRAULIC SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Universal Joint Assemblies For Hydraulic Link Motors In 943-973 Track Loaders, 225-245B Excavators, 235 and 245 Front Shovels, and227 Loggers{0599, 3251, 4351, 5058}
Universal Joint Assemblies For Hydraulic Link Motors In 943-973 Track Loaders, 225-245B Excavators, 235 and 245 Front Shovels, and227 Loggers{0599, 3251, 4351, 5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Swing Motor
225 EXCAVATOR VEHICLE SYSTEMS
Motors
225 EXCAVATOR VEHICLE SYSTEMS
Track Motors
225 EXCAVATOR VEHICLE SYSTEMS
Motors (Swing And Track)
215B & 225 HYDRAULIC PUMP AND MOTORS (PISTON TYPE)
Track Motors
SUPPLEMENT FOR HYDRAULIC TRACK MOTOR
Swing Motor
225 EXCAVATOR VEHICLE SYSTEMS
Motors
225 EXCAVATOR VEHICLE SYSTEMS
Track Motors
225 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
Snap Ring No Longer Used On Shaft Of Piston-Type Hydraulic Pumps And Motors{5070,5058}
1980/08/04
Maximum Permissible Rates For Case Drain Leakage Permit Field Checks Of Piston-Type Hydraulic Pumps And Motors{5070,5058}
1980/09/01
Shorter Bolts Used In Four Locations To Fasten Piston Motor Head To Body{3201,4351,5058}
1982/03/01
New Stem And Springs In Overspeed Valves Permit Operation Down Steeper Grades Without Track Motor Damage{5051,5451,5474}
1982/03/15
New Shaft And Retainer Available For Field Installation In Piston Type Hydraulic Motors{5058,3201,4351}
1982/07/19
New Hoses In Swing Motor Lines Group Have Improved Stem Assemblies{5058}
1983/10/03
Use Oversize Insert To Rebuild Drive Plate Assembly In Track Motors{4351}
1983/11/14
Checking And Adjusting Travel Drift{5058,5063}
1984/08/13
Add Oil Any Time Track Motor, Parking Brake Or Final Drives Are Installed{4055,4070,4353,4351}
1984/11/19
Identification Grooves Used On Slippers For Pistons In Hydraulic Pumps And Motors{5070,5058}
1984/11/26
Identification Of Track Motor Universal Joint Assemblies{3251,3201,5058}
1985/05/27
Improved Seal Used On Output Shaft Of Piston Link Motor Groups{5058}
1985/08/05
Brackets Added To Fasten Track Motor Tubes{4351,5057}
1986/02/03
Orifice Solenoid Valves Give Smoother Swing{5058,5477}
1986/02/10
Track Motor Tube Assemblies Are Now Interchangeable {5057}
1986/07/07
Temporary Service Parts List For New Hydraulic Pumps And Motors{5050,5070,5073}
1986/09/29
Two New Measuring Kits Are Available For Bent-Axis Piston Pumps And Hydraulic Motors{0767,5058,5070}
1987/05/18
New Service Tools Available For Disassembly And Assembly Of Bent-Axis Piston Pumps And Hydraulic Motors {0700}
1987/06/15
Change Made To 3G225 Housing To Prevent Failure Of 9J9847 Swivel Group{5060,5057,7050,4351}
1978/11/20
Installation Of New Seals In Former Track Motor Lines Swivel Groups{5060}
1988/11/14
New Bolt, Hardened Washer, And Increased Torque Keep Track Motor Retainer Bolts Tight{4350,4353}
1979/05/21
Loose Orifices Or Ones Not Installed In Main Hydraulic Control Valves Can Cause Track Chatter{5451,5058,4150,4351}
1979/10/15
Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17
Hoses May Be Substituted For Tube Assemblies In Track Motor Lines Group To Improve Service Life {3218}
1993/01/18
Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26
High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27

Caterpillar Parts SIS Catalog 225 :

VALVE GP-RELIEF
3G-9011 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-2512 VALVE GP-RELIEF
VALVE GP
9J-8732 VALVE GP
VALVE GP-RELIEF
3G-9011 VALVE GP-RELIEF
VALVE GP
9J-8732 VALVE GP
VALVE GP-RELIEF
9J-8730 VALVE GP-RELIEF
VALVE GP-SOLENOID
6T-5859 VALVE GP-SOLENOID
VALVE GP-RELIEF
9T-2511 VALVE GP-RELIEF
MOTOR GP-PISTON-LINK
8J-6773 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
3G-3843 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
3G-3843 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
3G-3843 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON-LINK
3G-3843 MOTOR GP-PISTON-LINK
MOTOR GP-PISTON
1U-2778 MOTOR GP-PISTON
MOTOR GP-PISTON
1U-2778 MOTOR GP-PISTON
MOTOR GP-PISTON
4T-3068 MOTOR GP-PISTON

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.