AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J1698 BOOM CYLINDER GROUP (CHANGE 10)-2 REQUIRED 139.7 MM (5.50") BORE X 1079.5 MM (42.50") STROKE PART OF 4V5831 STUB BOOM AN ATTACHMENT 225


HYDRAULIC SYSTEM
CYLINDER GP
FRAME AND BODY
LINES GP

EXCAVATOR 225 EXCAVATOR 51U
 225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE SEBP1226 225 51U   (1972)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
3G-2996 CYLINDER GP-BOOM
CYLINDER GP-BOOM
3G-2996 CYLINDER GP-BOOM
CYLINDER GP
8J-1698 CYLINDER GP
CYLINDER GP-BOOM
3G-7384 CYLINDER GP-BOOM
CYLINDER GP-BOOM
3G-7384 CYLINDER GP-BOOM
CYLINDER GP
9J-1755 CYLINDER GP
 

#SEBP12261170
 

8J-1698: CYLINDER GP

8J1698 BOOM CYLINDER GROUP (CHANGE 10)-2 REQUIRED
139.7 MM (5.50") BORE X 1079.5 MM (42.50") STROKE
PART OF 4V5831 STUB BOOM
AN ATTACHMENT
c520415 SEBP1226
8J1698 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL AS  
2. 8J-4411 [2] BEARING AS  
3. 2J-7686 [1] NUT-SELF LOCKING  
4. 9J-7191 [1] RING-WEAR  
5. 4T-5173 C [1] SEAL  
6. 3G-2994 [1] PISTON  
7. 1A-8537 [6] BOLT  
8. 3G-2995 C [1] STOP  
9. 8J-1697 R [1] CYLINDER AS  
10. 8J-1689 [1] RING-BACK-UP  
11. 8J-1688 [1] SEAL-O-RING  
12. 1D-4586 [2] BOLT  
13. 9T-0328 C [1] HEAD  
14. 2B-7408 [2] PLUG-PIPE  
15. 8J-2547 R [1] ROD-PISTON  
16. 8T-8389 [1] SEAL  
17. 5J-8325 [1] SEAL-U-CUP  
18. 8C-9121 [1] SEAL AS  
19. 5P-8247 [8] WASHER-HARD  
20. 8T-0777 C [1] RING-WEAR  
21. 8T-8376 [1] SEAL-HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261171
 

3G-7384: CYLINDER GP-BOOM

3G7384 CYLINDER GP-BOOM-(CHANGE 0)
TYPE 1. 140 MM (5.50") BORE X 1079 MM (42.50") STROKE
FOR USE WITH 3V5261 BOOM AR
FIELD INSTALLATION
c344378 SEBP1226
3G7384 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [2] SEAL AS  
2. 8J-4411 [1] BEARING AS  
3. 2J-7686 [1] NUT-SELF LOCKING  
4. 9J-7191 J [1] RING-WEAR  
5. 4T-5173 CJ [1] SEAL  
6. 3G-2994 [1] PISTON  
7. 1A-8537 [6] BOLT  
8. 3G-2995 [1] STOP  
9. 8J-1697 R [1] CYLINDER AS  
10. 8J-1689 J [1] RING-BACK-UP (BACK-UP)  
11. 8J-1688 J [1] SEAL-O-RING (O-RING)  
12. 1D-4586 [2] BOLT  
13. 8J-8868 [1] HEAD  
14. 8J-5960 [2] SEAL AS  
15. 3G-2941 R [1] ROD AS  
16. 6J-4169 J [1] SEAL-LIP TYPE  
17. 5J-8325 J [1] SEAL-U-CUP  
18. 6J-7167 J [1] SEAL-O-RING  
19. 2S-5658 [8] WASHER-HARD  
20. 8J-4585 [1] BEARING AS  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1398 C [1] KIT-HYD CYLINDER SEAL (SEAL)  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261172
 

3G-7384: CYLINDER GP-BOOM

3G7384 CYLINDER GP-BOOM-(CHANGE 02)
TYPE 2. 140 MM (5.50") BORE X 1079 MM (42.50") STROKE
FOR USE WITH 3V5261 BOOM AR
FIELD INSTALLATION
c406011 SEBP1226
3G7384 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [2] SEAL AS  
2. 8J-4411 [1] BEARING AS  
3. 2J-7686 [1] NUT-SELF LOCKING  
4. 9J-7191 J [1] RING-WEAR  
5. 4T-5173 J [1] SEAL  
6. 3G-2994 [1] PISTON  
7. 1A-8537 [6] BOLT  
8. 3G-2995 [1] STOP  
9. 8J-1697 R [1] CYLINDER AS  
10. 8J-1689 J [1] RING-BACK-UP  
11. 8J-1688 J [1] SEAL-O-RING  
12. 1D-4586 [2] BOLT  
13. 9T-0328 C [1] HEAD  
14. 8J-5960 [2] SEAL AS  
15. 3G-2941 R [1] ROD AS  
16. 6J-4169 J [1] SEAL-LIP TYPE  
17. 5J-8325 J [1] SEAL-U-CUP  
18. 6J-7167 J [1] SEAL-O-RING  
19. 2S-5658 [8] WASHER-HARD  
20. 8J-4585 [1] BEARING AS  
21. 8T-0777 C [1] RING-WEAR  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1398 [1] KIT-HYD CYLINDER SEAL  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261173
 

9J-1755: CYLINDER GP

9J1755 STICK CYLINDER GROUP (CHANGE 3 & 4)-TYPE 1
152.4 MM (6") BORE X 1422.4 MM (56") STROKE
PART OF 3V5261 & 4V5830 BOOMS
AN ATTACHMENT
c215691 SEBP1226
9J1755 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 8J-8731 [1] BOLT  
4. 3G-2912 C [1] STOP  
5. 3G-2911 C [1] SEAL ASSEM.  
6. 4J-6888 [1] NUT  
7. 8J-1746 [1] RING  
8. 9J-1242 [1] SEAL ASSEM.  
9. 9J-2114 [1] PISTON  
10. 8J-6070 [1] RING  
11. 3G-2909 C [1] STOP  
12. 9J-1754 R [1] CYLINDER ASSEM.  
13. 8J-1717 [1] RING (Back-Up)  
14. 6D-9157 [1] SEAL (O-Ring)  
15. 9J-5693 [1] HEAD  
16. 1D-4610 [6] BOLT  
17. 1D-4612 [2] BOLT  
18. 5H-1504 [8] WASHER  
19. 2B-7408 [2] PLUG  
20. 9J-1243 R [1] ROD  
21. 8J-6069 [1] SEAL  
    -OR-
  9J-1325 [1] SEAL (Fire Resistant)  
22. 5J-8375 [1] SEAL  
    -OR-
  9J-1328 [1] SEAL ASSEM. (Fire Resistant)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261174
 

9J-1755: CYLINDER GP

9J1755 CYLINDER GP-STICK (CHANGE 5-7)
TYPE 2. 152.4 MM (6") BORE X 1422.4 MM (56") STROKE
PART OF 3V5261 & 4V5830 BOOMS
AN ATTACHMENT
c339587 SEBP1226
9J1755 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL AS  
2. 8J-4411 [2] BEARING AS  
3. 8J-8731 [1] BOLT-HEAD SPL  
4. 3G-2912 [1] STOP  
5. 3G-2911 [1] SEAL AS  
6. 4J-6888 [1] NUT-SELF LOCKING  
7. 8J-1746 [1] RING-WEAR  
8. 4T-4144 C [1] SEAL AS  
9. 9J-2114 [1] PISTON  
10. 8J-6070 [1] SEAL-RING  
11. 3G-2909 [1] STOP  
12. 9J-1754 R [1] CYLINDER AS-HYD  
13. 8J-1717 [1] RING-BACK-UP  
14. 6D-9157 [1] SEAL-O-RING  
15. 9T-1067 C [1] HEAD  
16. 1D-4610 [6] BOLT  
17. 1D-4612 [2] BOLT  
18. 5P-8248 C [8] WASHER-HARD  
19. 2B-7408 [2] PLUG-PIPE  
20. 9J-1243 R [1] ROD-PISTON  
21. 8J-6069 [1] SEAL-LIP TYPE  
22. 5J-8375 [1] SEAL-U-CUP  
   
   
   
   
23. 8T-3330 C [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1434 C [1] KIT-HYD CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261175
 

9J-1755: CYLINDER GP

9J1755 CYLINDER GP-STICK (CHANGE 08)
TYPE 3. 152MM (6") BORE X 1422MM (56") STROKE
PART OF 3V5261 & 4V5830 BOOMS
AN ATTACHMENT
c489769 SEBP1226
9J1755 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 J [4] SEAL AS  
2. 8J-4411 [2] BEARING AS  
3. 061-6711 [1] RING-RETAINING  
4. 3G-2912 [1] STOP  
5. 3G-2911 J [1] SEAL AS  
6. 4J-6888 [1] NUT-SELF LOCKING  
7. 8J-1746 J [1] RING-WEAR  
8. 4T-4144 J [1] SEAL AS  
9. 9J-2114 [1] PISTON  
10. 8C-9128 CJ [1] SEAL AS  
11. 3G-2909 [1] STOP  
12. 9T-6940 CR [1] CYLINDER AS  
13. 8J-1717 J [1] RING-BACK-UP  
14. 6D-9157 J [1] SEAL-O-RING  
15. 9T-1067 [1] HEAD  
16. 1D-4610 [6] BOLT  
17. 1D-4612 [2] BOLT  
18. 5P-8248 [8] WASHER-HARD  
19. 2B-7408 [2] PLUG-PIPE  
20. 9T-4146 R [1] ROD AS  
21. 8C-9135 CJ [1] SEAL-LIP TYPE  
22. 5J-8375 J [1] SEAL-U-CUP  
23. 8T-3330 J [1] RING-WEAR  
24. 9T-7344 C [1] WASHER  
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  9X-6393 [1] KIT-HYD CYLINDER SEAL  
    (INCLS PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261176
 

9J-7006: CYLINDER GP-HOE BUCKET

9J7006 HOE BUCKET CYLINDER GROUP (CHANGE 8)-TYPE 1
139.7 MM (5.50") BORE X 1087.1 MM (42.80") STROKE
PART OF 3V4838 & 9C6310 HOE BUCKET
AN ATTACHMENT
c232197 SEBP1226
9J7006 CYLINDER GP-HOE BUCKET Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 8J-4417 [1] BOLT  
4. 3G-3262 [1] STOP  
5. 3G-3259 [1] SEAL ASSEM.  
6. 2J-7686 [1] NUT  
7. 9J-7191 [1] RING  
8. 8J-8767 [1] SEAL ASSEM.  
9. 3G-3261 [1] PISTON  
10. 5P-8247 C [8] WASHER  
11. 3G-5911 C [1] STOP  
12. 9J-7005 R [1] CYLINDER ASSEM.  
13. 8J-1689 [1] RING (back-up)  
14. 8J-1688 [1] SEAL (o-ring)  
15. 8J-8868 [1] HEAD  
16. 1D-4586 [2] BOLT  
17. 2B-7408 [2] PLUG  
18. 9J-7004 R [1] ROD  
19. 6J-4169 [1] SEAL  
20. 5J-8325 [1] SEAL  
21. 6J-7167 [1] RING  
22. 1A-8537 [6] BOLT  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261177
 

9J-7006: CYLINDER GP-HOE BUCKET

9J7006 HOE BUCKET CYLINDER GROUP-(CHANGE 9)-TYPE 2
139.7 MM (5.50") BORE X 1087.1 MM (42.80") STROKE
PART OF 3V4838 & 9C6310 HOE BUCKET
AN ATTACHMENT
c411325 SEBP1226
9J7006 CYLINDER GP-HOE BUCKET Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL AS  
2. 8J-4411 [2] BEARING AS  
3. 5J-8325 [1] SEAL-U-CUP  
4. 6J-7167 [1] SEAL-O-RING  
5. 1A-8537 [6] BOLT  
6. 2J-7686 [1] NUT-SELF LOCKING  
7. 9J-7191 [1] RING-WEAR  
8. 4T-5173 [1] SEAL  
9. 3G-3261 [1] PISTON  
10. 5P-8247 [8] WASHER-HARD  
11. 3G-5911 [1] STOP  
12. 9J-7005 R [1] CYLINDER AS-HYD  
13. 8J-1689 [1] RING-BACK-UP  
14. 8J-1688 [1] SEAL-O-RING  
15. 8J-8868 [1] HEAD  
    -OR-
  9T-0328 [1] HEAD  
  8T-0777 [1] RING-WEAR  
16. 1D-4586 [2] BOLT  
17. 2B-7408 [2] PLUG-PIPE  
18. 9J-7004 R [1] ROD-PISTON  
19. 6J-4169 [1] SEAL-LIP TYPE  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12261178
 

9C-2573: LINES GP-GREASE

9C2573 LINES GP-GREASE-BOOM
TYPE 1
PART OF 3V5261 BOOM AR
AN ATTACHMENT
c405865 SEBP1226
9C2573 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2772 [7] CLIP  
2. 0S-0509 [7] BOLT  
  5M-2894 [11] WASHER  
3. 9C-2568 [1] TUBE AS  
4. 9C-2567 [1] TUBE AS  
5. 5K-9242 [3] UNION-FLARED  
6. 9C-2566 [1] TUBE AS  
7. 1D-4717 [4] NUT  
8. 9S-7712 [2] ELBOW-FLARED  
9. 2L-2685 [2] CLIP  
10. 2D-1683 [3] FITTING  
11. 6K-6967 [4] ADAPTER-PIPE  
12. 2V-0460 [1] HOSE AS  
13. 9L-1775 [2] BRACKET  
14. 5V-5476 [2] HOSE AS  
15. 6L-3616 [5] CONNECTOR-FLARED  
16. 9C-2569 [1] TUBE AS  
17. 9C-2570 [1] TUBE AS  
18. 9C-2571 [1] TUBE AS  
19. 9C-2572 [1] TUBE AS  
20. 4D-8948 [2] CLIP  
21. 3B-8488 [1] FITTING  
22. 5K-9243 [1] ELBOW-FLARED  
 

#SEBP12261179
 

9C-2573: LINES GP-GREASE

9C2573 LINES GP-GREASE-BOOM
TYPE 2
PART OF 3V5261 BOOM AR
AN ATTACHMENT
c405892 SEBP1226
9C2573 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2772 C [6] CLIP  
2. 0S-0509 C [6] BOLT  
  5M-2894 C [10] WASHER  
3. 3B-8489 C [3] FITTING-GREASE  
4. 9C-2567 [1] TUBE AS  
5. 5K-9242 [3] UNION-FLARED  
6. 9C-2566 [1] TUBE AS  
7. 1D-4717 [4] NUT  
8. 9S-7712 [2] ELBOW-FLARED  
9. 2L-2685 [2] CLIP  
10. 2D-1683 [3] FITTING  
11. 6K-6967 C [3] ADAPTER-PIPE  
12. 6W-7492 C [1] HOSE AS  
13. 9L-1775 [2] BRACKET  
14. 5V-5476 [2] HOSE AS  
15. 6L-3616 C [4] CONNECTOR-FLARED  
16. 9C-2569 [1] TUBE AS  
17. 9C-2570 [1] TUBE AS  
18. 9C-2571 [1] TUBE AS  
19. 9C-2572 [1] TUBE AS  
20. 4D-8948 [2] CLIP  
21. 5M-6214 C [2] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bucket Cylinder<BR> (8J2566)
225 EXCAVATOR HYDRAULIC SYSTEM
Bucket Cylinder Drift
225 EXCAVATOR HYDRAULIC SYSTEM
Boom Cylinder<BR> (8J1698)
225 EXCAVATOR HYDRAULIC SYSTEM
Boom Cylinder Drift
225 EXCAVATOR HYDRAULIC SYSTEM
Stick Cylinder<BR> (8J1719 &amp; 9J1755)
225 EXCAVATOR HYDRAULIC SYSTEM
Stick Cylinder Drift
225 EXCAVATOR HYDRAULIC SYSTEM
Bucket Cylinder<BR> (9J7006)
225 EXCAVATOR HYDRAULIC SYSTEM
Bucket Cylinder Drift
225 EXCAVATOR HYDRAULIC SYSTEM
Boom Cylinder<BR> (3G2996)
225 EXCAVATOR HYDRAULIC SYSTEM
Boom Cylinder Drift
225 EXCAVATOR HYDRAULIC SYSTEM
Stick Cylinder<BR> (9J1755)
225 EXCAVATOR HYDRAULIC SYSTEM
Stick Cylinder Drift
225 EXCAVATOR HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder
225 EXCAVATOR VEHICLE SYSTEMS
Stick Cylinder
225 EXCAVATOR VEHICLE SYSTEMS
Bucket And Stick Cylinders
225 EXCAVATOR VEHICLE SYSTEMS
Boom Cylinders
225 EXCAVATOR VEHICLE SYSTEMS
Hydraulic Cylinder Bearing Assemblies
225 EXCAVATOR VEHICLE SYSTEMS
Bucket Cylinder
225 EXCAVATOR VEHICLE SYSTEMS
Stick Cylinder
225 EXCAVATOR VEHICLE SYSTEMS
Bucket And Stick Cylinders
225 EXCAVATOR VEHICLE SYSTEMS
Boom Cylinders
225 EXCAVATOR VEHICLE SYSTEMS
Service Magazine
New Piston Seal For 139.7 mm (5.50&quot;) Hydraulic Cylinders{5456,5457,5104,5458}
1985/05/13
New Method Used To Retain Spherical Bearings In Cylinder Groups {5456,5457,5458,4303}
1986/02/24
New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13
Hydraulic Cylinder Noise {5100,5102}
1986/12/01
New Stops, Pistons And Seal Assemblies Used In Boom, Stick And Bucket Hydraulic Cylinders{5456,5457,5458}
1977/04/11
List Of Improvements To Boom, Stick And Bucket Hydraulic Cylinders{5456,5457,5458}
1977/05/30
New Boom And Boom Cylinder Mounting Pins Have Stronger Retainers To Prevent Pin Rotation{7051,6501}
1977/10/10
Bolt And Washer (Stop) Removed From Bucket Cylinder Group {5457}
1988/01/25
Testing And Trouble Shooting Cylinder Drift In Excavator Hydraulic Circuits{5050,5456,5457,5458}
1979/09/24
Hydraulic Cylinder End Bores Can Be Repaired {5456,5457,5458,5470}
1989/02/06
New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavator Cylinders{5456,5457,5458,5470}
1990/09/10
Always Add Oval Head Seals To All Sizes Of Hydraulic Cylinders{5456,5457,5458,5470}
1991/05/27
New Seals And Piston Nuts Used; New Head Bolt And Piston Nut Tightening Torques Used In Excavators Cylinders{5456,5457,5458,5470}
1992/02/03
Information Release Memo PELE0401 Has Information About Remanufactured Hydraulic Piston Pump And Piston Motor Groups {0374,4134,4136,4351,5058,5070,5080,5314,5315,5473}
1994/12/26
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 225 :

CYLINDER GP-BOOM
3G-2996 CYLINDER GP-BOOM
CYLINDER GP-BOOM
3G-2996 CYLINDER GP-BOOM
VALVE GP-CONTROL
9J-8573 VALVE GP-CONTROL
VALVE GP-SOLENOID
9J-8145 VALVE GP-SOLENOID
LINES GP-CLAMSHELL
7V-5942 LINES GP-CLAMSHELL
LINES GP-CLAMSHELL
7V-5942 LINES GP-CLAMSHELL
LINES GP-CLAMSHELL ROTATOR
5V-7414 LINES GP-CLAMSHELL ROTATOR
LINES GP-CLAMSHELL ROTATOR
5V-7414 LINES GP-CLAMSHELL ROTATOR
CYLINDER GP-BOOM
3G-7384 CYLINDER GP-BOOM
CYLINDER GP-BOOM
3G-7384 CYLINDER GP-BOOM
CYLINDER GP
9J-1755 CYLINDER GP
CYLINDER GP
9J-1755 CYLINDER GP
CYLINDER GP
9J-1755 CYLINDER GP
CYLINDER GP-HOE BUCKET
9J-7006 CYLINDER GP-HOE BUCKET
CYLINDER GP-HOE BUCKET
9J-7006 CYLINDER GP-HOE BUCKET
LINES GP-GREASE
9C-2573 LINES GP-GREASE

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.