AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3208 TRUCK ENGINE 32Y00001-68440 LUBRICATION SYSTEM Caterpillar SIS



TRUCK ENGINE 3208 TRUCK ENGINE 32Y
 3208 TRUCK ENGINE 32Y00001-68440 SEBP1237 3208 32Y   (1978)

Parts group 3208:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
LINES GP-PCV
9N-0735 LINES GP-PCV
9N735 POSITIVE CRANKCASE VENTILATION VALVE GROUP
VALVE AS-PCV
9L-8790 VALVE AS-PCV
9L8790 CRANKCASE VENTILATION VALVE ASSEMBLY
Part of 9N735 Positive Crankcase Ventilation Valve Group
BREATHER GP
9N-0546 BREATHER GP
9N546 BREATHER GROUP
FUMES DISPOSAL GP
9N-8059 FUMES DISPOSAL GP
9N8059 FUMES DISPOSAL GROUP
FILTER GP-ENGINE OIL
9L-9200 OIL FILTER ASSEMBLIES
9L9200 OIL FILTER ASSEMBLY--2 Required
Serial No. 32Y1 to 32Y5335 inclusive
- or -
9N5570 OIL FILTER ASSEMBLY--2 Required
Serial No. 32Y5336--Up
OIL FILTER ASSEMBLIES
9N-5570 OIL FILTER ASSEMBLIES
9L9200 OIL FILTER ASSEMBLY--2 Required
Serial No. 32Y1 to 32Y5335 inclusive
- or -
9N5570 OIL FILTER ASSEMBLY--2 Required
Serial No. 32Y5336--Up
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
9N-2538 GAUGE GP-OIL LEVEL (DIPSTICK)
9N2538 OIL LEVEL GAUGE GROUP
GAUGE GP-OIL LEVEL (DIPSTICK)
9N-0142 GAUGE GP-OIL LEVEL (DIPSTICK)
9N142 OIL LEVEL GAUGE GROUP
OIL LEVEL GAUGE GROUP
9N-3286 OIL LEVEL GAUGE GROUP
9N3286 OIL LEVEL GAUGE GROUP
FOR USE WITH FRONT SUMP OIL PAN
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
9N-3287 GAUGE GP-OIL LEVEL (DIPSTICK)
9N3287 OIL LEVEL GAUGE GROUP
FOR USE WITH REAR SUMP OIL PAN
AN ATTACHMENT
OIL LEVEL GAUGE GROUP
9N-3699 OIL LEVEL GAUGE GROUP
9N3699 OIL LEVEL GAUGE GROUP--Rear Sump 5 Degrees
LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
9N-5129 LINES GP-ENGINE OIL
9N5129 OIL LINES GROUP--Front Sump
LINES GP-ENGINE OIL
9N-5130 LINES GP-ENGINE OIL
9N5130 OIL LINES GROUP--Rear Sump
PUMP GP-ENGINE OIL
PUMP GP-OIL
9N-5128 PUMP GP-OIL
9N5128 OIL PUMP GROUP

Information:

(For parts list, see above)

Truck Engine News
Breather Element Added To PCV Valve
1985/07/01
Engine News
New Hose Has More Resistance To Heat
1978/12/13
Specifications
Manifold And Ventilation Valve
3208 TRUCK ENGINE
Breather
3208 TRUCK ENGINE
Breather
3208 TRUCK ENGINE
Disassembly and Assembly
Crankcase Ventilator Valve
3208 TRUCK ENGINE
Crankcase Breather
3208 TRUCK ENGINE
Crankcase Breather
3208 TRUCK ENGINE
Service Magazine
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Breather Element Added To PCV Valve{1300,1074}
1985/07/01
New Hose Has More Resistance To Heat{1074}
1978/11/27
Engine News
Rack Shut-Off Solenoid Can Be Removed And Engine Started When There Is An Emergency
1980/11/12
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Service Magazine
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase{1316}
1981/03/02
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
Truck Engine News
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals
1981/04/09
Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/29
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/04/01
Oil Cooler Gasket Has Improved Material
1986/08/01
New Oil Cooler And Filter Base Assembly And New Oil Cooler And Filter Base Group Have Stronger Mounting Flanges {1378,1306}
1994/05/31
Engine News
New Oil Filter And Filter Base Assemblies
1979/03/14
Inspection Of Oil Filters In Parts Stocks
1979/04/25
Inspection Of Parts Stocks Of 9L9200 Oil Filters
1979/06/06
During Installation Of An Auxiliary Bypass Oil Filter, Be Sure Passage In Oil Cooler Fitting Is Open
1979/06/20
Inspection Of Oil Filters When Bearing Problems Are Found
1979/08/08
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
How To Find Correct Oil Change Intervals For Truck Engines Operated In Short Distance Applications (Pick Up And Delivery Service)
1978/04/05
If Auxiliary Bypass Oil Filters Are Used-Be Sure To Add Enough Extra Oil To Fill The Filters
1978/05/24
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve
1978/12/13
Special Instruction
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Specifications
Oil Cooler And Filter<BR> (Earlier with oil filter relief valve in oil filter)
3208 TRUCK ENGINE
Oil Cooler And Filter<BR> (Later with oil filter relief valve in oil cooler base)
3208 TRUCK ENGINE
Disassembly and Assembly
Check Valve And Bypass Valve
3208 TRUCK ENGINE
Oil Filter Base And Engine Oil Cooler
3208 TRUCK ENGINE
Service Magazine
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
Two Oil Change Kits Have Oil Filters, Cooling System Conditioner {1318,1350}
1982/09/13
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Planned Engine Repairs{0374,0375,1318,0372}
1982/10/04
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines{1378,1380}
1986/04/21
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Preparation Of Truck Engines For Cold Weather Operation{1300,1000}
1977/10/17
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Engine Oil Refill Capacity Reduced {1318,1326}
1987/11/30
How To Find Correct Oil Change Intervals For Truck Engines Operated In Short Distance Applications (Pick Up And Delivery Service){1318,7500,0374}
1978/03/27
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve{1355}
1978/11/27
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
New Oil Filter And Filter Base Assemblies{1306,1378,1318}
1979/03/19
During Installation Of An Auxiliary Bypass Oil Filter, Be Sure Passage In Oil Cooler Fitting Is Open{1314,1378}
1979/06/18
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Truck Engine News
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase
1981/03/06
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/09/01
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1984/06/27
New Guide Assembly Used In Oil Level Gauge Group
1985/02/01
Stronger Oil Level Guide Used
1986/11/01
Engine News
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Specifications
Oil Level Gauge
3208 TRUCK ENGINE
Service Magazine
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
New Guide Assembly Used In Oil Level Gauge Group{1326,1300}
1985/02/11
Stronger Oil Level Guide Used{1326,1300}
1986/10/27
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Truck Engine News
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump
1985/07/01
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/04/01
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups
1988/01/01
Engine News
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump{1307}
1985/07/15
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines{1378,1380}
1986/04/21
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Truck Engine News
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/01
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase
1981/03/06
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals
1981/04/09
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/09/01
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1984/06/27
New Guide Assembly Used In Oil Level Gauge Group
1985/02/01
Oil Total Base Number (TBN) Test Kit Available
1986/01/01
Engine Oil Refill Capacity Reduced
1987/12/01
Engine News
New Oil Filter And Filter Base Assemblies
1979/03/14
Inspection Of Oil Filters In Parts Stocks
1979/04/25
Inspection Of Parts Stocks Of 9L9200 Oil Filters
1979/06/06
During Installation Of An Auxiliary Bypass Oil Filter, Be Sure Passage In Oil Cooler Fitting Is Open
1979/06/20
Inspection Of Oil Filters When Bearing Problems Are Found
1979/08/08
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System
1980/07/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
How To Find Correct Oil Change Intervals For Truck Engines Operated In Short Distance Applications (Pick Up And Delivery Service)
1978/04/05
If Auxiliary Bypass Oil Filters Are Used-Be Sure To Add Enough Extra Oil To Fill The Filters
1978/05/24
Specifications
Oil Level Gauge
3208 TRUCK ENGINE
Disassembly and Assembly
Oil Filter Base And Engine Oil Cooler
3208 TRUCK ENGINE
Service Magazine
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase{1316}
1981/03/02
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Planned Engine Repairs{0374,0375,1318,0372}
1982/10/04
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
New Guide Assembly Used In Oil Level Gauge Group{1326,1300}
1985/02/11
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Breather Element Added To PCV Valve{1300,1074}
1985/07/01
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump{1307}
1985/07/15
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Stronger Oil Level Guide Used{1326,1300}
1986/10/27
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Preparation Of Truck Engines For Cold Weather Operation{1300,1000}
1977/10/17
Separate Parts Of Oil Pump Cover Now Available{1304,1314}
1977/10/17
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
New Oil Filter And Filter Base Assemblies{1306,1378,1318}
1979/03/19
During Installation Of An Auxiliary Bypass Oil Filter, Be Sure Passage In Oil Cooler Fitting Is Open{1314,1378}
1979/06/18
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Former Oil Pump Group Is Now Used Again{1304}
1979/11/26
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Truck Engine News
New Clearance Specifications For Oil Pump Rotor Tip
1981/11/13
Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts
1982/05/19
Reconditioning Of Oil Pump Covers
1982/10/27
New Relief Valve Guide Used In Oil Pump
1984/08/06
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump
1985/07/01
Engine News
Former Oil Pump Group Is Now Used Again
1979/11/28
New Rotor Assembly For Engine Oil Pump Has A Drilled Passage For Better Lubrication Of Oil Pump Bearing
1977/05/25
Separate Parts Of Oil Pump Cover Now Available
1977/12/14
Sender Unit For Engine Oil Pressure Gauge Moved To New Location On Truck Cab
1978/12/13
Specifications
Oil Pump<BR> (With plunger bypass valve)
3208 TRUCK ENGINE
Oil Pump<BR> (With belleville washer bypass valve)
3208 TRUCK ENGINE
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Timing Gear Cover And Oil Pump
3208 TRUCK ENGINE
Oil Pump And Relief Valve
3208 TRUCK ENGINE
Service Magazine
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts{1315,1304}
1982/04/26
Reconditioning Of Oil Pump Covers{1304}
1982/10/25
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump{1307}
1985/07/15
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
New Rotor Assembly For Engine Oil Pump Has A Drilled Passage For Better Lubrication Of Oil Pump Bearing{1304}
1977/05/09
Separate Parts Of Oil Pump Cover Now Available{1304,1314}
1977/10/17
New Assembly Procedure Helps Prevent Oil Pump Failures{1304,4457}
1987/02/09
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Former Oil Pump Group Is Now Used Again{1304}
1979/11/26
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Truck Engine News
Oil Total Base Number (TBN) Test Kit Available
1986/01/01
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
Lubrication For A Rebuilt Engine{0374,1000}
1978/06/19
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.