AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N5669 SHORT BLOCK GROUP--Field Installation Serial No. 32Y8309--Up ONLY FOR USE WITH NON-EGR ENGINES RATED AT 175 BHP OR LESS 3208


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
FLYWHEEL GP
CAMSHAFT GP

TRUCK ENGINE 3208 TRUCK ENGINE 32Y
 3208 TRUCK ENGINE 32Y00001-68440 FORD MOTOR CO. SEBP1238 3208 32Y   (1978)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
PANEL GP-CYLINDER BLOCK
9L-6560 PANEL GP-CYLINDER BLOCK
PANEL GP-CYLINDER BLOCK
9L-6560 PANEL GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
9N-5190 BLOCK GP-SHORT
9N-5669 CYLINDER BLOCK GP
 

#SEBP12380060
 

9N-5669: CYLINDER BLOCK GP

9N5669 SHORT BLOCK GROUP--Field Installation
Serial No. 32Y8309--Up
ONLY FOR USE WITH NON-EGR ENGINES RATED AT 175 BHP OR LESS
SEBP12380060 SEBP1238
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9L-6065 Y [1] CYLINDER BLOCK COVER GROUP  
  9N-2017 Y [1] CRANKSHAFT GROUP  
    - OR -
  9N-6222 Y [1] CRANKSHAFT GROUP  
  9N-3761 Y [1] CYLINDER BLOCK GROUP  
  9N-5643 Y [8] CONNECTING ROD AND PISTON GROUP  
    - OR -
  1W-2200 Y [8] CONNECTING ROD AND PISTON GROUP  
  9L-7816 [2] FLYWHEEL BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12380061
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP12380061 SEBP1238
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP12380062
 

9N-2017: CRANKSHAFT GP

9N2017 Crankshaft Group
Also part of 9N5190 and 9N5669 Short Block Groups listed on Pages 36 and 37
c308500 SEBP1238
9N2017 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 [1] BEARING-MAIN  
2. 9N-5792 [3] BEARING-MAIN  
3. 9N-5791 [1] BEARING-THRUST  
4. 9N-6221 CR [1] CRANKSHAFT AS  
5. 9N-0299 [1] GEAR-CRANKSHAFT (51 TEETH)  
6. 9N-0286 [1] KEY  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12380063
 

9N-2133: CRANKSHAFT GP

9N2133 CRANKSHAFT GROUP
Note: For Field Replacement of 9N304 Crankshaft Assembly order 1--9N305
Crankshaft Assembly plus 2--9L7816 Bolt
c308499 SEBP1238
9N2133 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 C [1] BEARING  
2. 9N-5792 C [3] BEARING  
3. 9N-5791 C [1] BEARING  
4. 9N-0304 R [1] CRANKSHAFT ASSEM.  
5. 9N-0299 [1] GEAR (51 teeth)  
6. 9N-6677 C [1] KEY  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12380064
 

9N-6222: CRANKSHAFT GP

9N6222 CRANKSHAFT GROUP--Type 1
Serial No. 32Y55416--Up
c230034 SEBP1238
9N6222 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 [1] BEARING-MAIN  
2. 9N-5792 [3] BEARING-MAIN  
3. 9N-5791 [1] BEARING-THRUST  
4. 9N-0305 R [1] CRANKSHAFT AS  
5. 9N-0299 [1] GEAR-CRANKSHAFT (51 TEETH)  
6. 9N-6677 [1] KEY-CRANKSHAFT  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12380065
 

9N-6222: CRANKSHAFT GP

9N6222 CRANKSHAFT GROUP--Type 2
Serial No. 32Y55416--Up
Field Replacement of 9N6221 Crankshaft Assembly order 2W85 Service Crankshaft Group shown on Page 40C
c308470 SEBP1238
9N6222 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 [1] BEARING  
2. 9N-5792 [3] BEARING  
3. 9N-5791 [1] BEARING  
4. 9N-6221 RC [1] CRANKSHAFT ASSEM.  
    (Includes)
5. 7N-6290 C [1] GEAR (51 teeth)  
6. 9N-0286 [1] KEY  
7. 9L-8336 [1] SLEEVE  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12380066
 

2W-0085: CRANKSHAFT GP

2W85 SERVICE CRANKSHAFT GROUP--Field Installation
Provides Field Replacement for 9N6221 Crankshaft Assembly
c311489 SEBP1238
2W0085 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0036 [1] SEAL GROUP  
2. 9L-7736 [1] SEAL  
3. 9L-8336 [1] SLEEVE  
4. 9N-6221 R [1] CRANKSHAFT AS.  
5. 7N-6290 [1] GEAR (51 TEETH)  
6. 9N-6677 [1] KEY  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12380067
 

9N-0542: SEAL GP-CRANKSHAFT

9N542 CRANKSHAFT SEAL GROUP
c158853 SEBP1238
9N0542 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0307 [1] SEAL  
2. 9L-7600 [1] SEAL  
 

#SEBP12380068
 

9N-0399: FASTENER GP-FLYWHEEL

9N399 FLYWHEEL FASTENER GROUP
c205496 SEBP1238
9N0399 FASTENER GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0401 [1] COVER-PROTECTIVE  
2. 9L-7816 C [10] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12380069
 

9N-0728: CAMSHAFT GP-SINGLE

9N728 CAMSHAFT GROUP
c306165 SEBP1238
9N0728 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7036 [1] CAMSHAFT ASSEM.  
2. 5P-4283 [1] DOWEL  
3. 1N-4660 C [1] GEAR ASSEM. (102 TEETH)  
4. 9L-7028 [2] DOWEL  
5. 9N-6218 C [1] PIN  
6. 4F-9325 C [1] GASKET  
  C   INDICATES CHANGE
 

Information:

Truck Engine News
Inspection Marks On Bearings
1982/05/19
List Of Main And Connecting Rod Bearings Currently Available
1982/06/23
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1982/06/23
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Resurfaced Cylinder Blocks And Heads
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block
1983/08/31
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing
1987/06/01
New Connecting Rod And Main Bearing Kits Available
1989/10/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Engine News
New Engine Cylinder Block Used
1979/03/14
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings
1979/03/14
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Procedures And Cautions For Use Of A FLEX-HONE On 3204 And 3208 Engines
1978/06/14
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installation Of 4W6143 Sleeve{1201}
Installation Of 4W6143 Sleeve{1201}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
installation of 9n6275 cylinder sleeve{1222}
installation of 9n6275 cylinder sleeve{1222}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Block Group And Cylinder Block Service Group For 1100, 3100 And 3208 Naturally Aspirated Engines Or 3208 Turbocharged Engines{1200, 1201}
Installation Of Short Block Group And Cylinder Block Service Group For 1100, 3100 And 3208 Naturally Aspirated Engines Or 3208 Turbocharged Engines{1200, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3208 TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Crankshaft Main Bearing
3208 TRUCK ENGINE
Camshaft Bearings
3208 TRUCK ENGINE
Service Magazine
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Additional 3208 Remanufactured Truck Engines Available{1000,1200}
1982/10/18
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block{1222,1223}
1983/08/08
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Flywheel Housing With 6&deg; Offset Transmission Mounting Holes Must Be Used In GMC Trucks{1000,1157}
1986/06/09
Changes To 3208 Naturally Aspirated Truck Engines For 1986 Model Year {1200,1250}
1986/07/07
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing {1203}
1987/06/15
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05
New Engine Cylinder Block Used{1201}
1979/03/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Caterpillar Parts SIS Catalog 3208 :

9N-3763 SERVICE GP-CYLINDER BLOCK
9N-5190 BLOCK GP-SHORT
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
PANEL GP-CYLINDER BLOCK
9L-6560 PANEL GP-CYLINDER BLOCK
PANEL GP-SOUND SUPPRESSION
9N-6434 PANEL GP-SOUND SUPPRESSION
PANEL GP-CYLINDER BLOCK
9L-6560 PANEL GP-CYLINDER BLOCK
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
9N-6628 ENGINE AR
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT GP
9N-2017 CRANKSHAFT GP
CRANKSHAFT GP
9N-2133 CRANKSHAFT GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
CRANKSHAFT GP
2W-0085 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
FASTENER GP-FLYWHEEL
9N-0399 FASTENER GP-FLYWHEEL

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.