AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CRANKSHAFT BEARING REPLACEMENTS 3208 ENGINE - MACHINE


BASIC ENGINE
CRANKSHAFT GP
PULLEY GP
DAMPER GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 INDUSTRIAL ENGINE 90N37285-52892 SEBP1243 3208 90N   (2018)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GROUP
9N-2017 CRANKSHAFT GROUP
CRANKSHAFT GROUP
9N-2133 CRANKSHAFT GROUP
CRANKSHAFT GROUP
9N-6222 CRANKSHAFT GROUP
CRANKSHAFT SEAL GROUP
9N-0542 CRANKSHAFT SEAL GROUP
CRANKSHAFT BEARING REPLACEMENTS
 

#SEBP12430110
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP12430110 SEBP1243
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP12430111
 

9L-7461: CRANKSHAFT PULLEY GROUP

9L7461 CRANKSHAFT PULLEY GROUP
CANNOT BE USED WITH 4N7393 RADIATOR GROUP SHOWN ON PAGE 109
AN ATTACHMENT
c201764 SEBP1243
9L7461 CRANKSHAFT PULLEY GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0573 C [6] BOLT  
2. 9L-7245 C [1] PULLEY-AUXILIARY  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12430112
 

9N-0787: PULLEY AND DAMPER GROUP

9N787 PULLEY AND DAMPER GROUP
Serial No. 90N37285 to 90N52599 inclusive
c225473 SEBP1243
9N0787 PULLEY AND DAMPER GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1368 [1] BOLT  
2. 9N-0288 C [1] WASHER  
3. 6N-7055 C [1] DAMPER ASSEM.  
    (Includes)
4. 9L-5968 [1] SHIELD  
5. 9N-0293 [1] POINTER  
  C   INDICATES CHANGE
 

#SEBP12430113
 

9N-0787: PULLEY AND DAMPER GROUP

9N787 PULLEY AND DAMPER GROUP
Serial No. 90N52600--Up
c302881 SEBP1243
9N0787 PULLEY AND DAMPER GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1368 [1] BOLT  
2. 9N-0288 [1] WASHER  
3. 9N-6051 C [1] DAMPER ASSEM.  
    (Includes)
4. 9N-5592 [1] SHIELD  
5. 9N-0293 [1] POINTER  
  C   INDICATES CHANGE
 

#SEBP12430114
 

9N-0728: CAMSHAFT GROUP

9N728 CAMSHAFT GROUP
c306165 SEBP1243
9N0728 CAMSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7036 [1] CAMSHAFT ASSEM.  
2. 5P-4283 [1] DOWEL  
3. 1N-4660 C [1] GEAR ASSEM. (102 TEETH)  
4. 9L-7028 [2] DOWEL  
5. 9N-6218 C [1] PIN  
6. 4F-9325 C [1] GASKET  
  C   INDICATES CHANGE
 

#SEBP12430115
 

9N-3538: CONNECTING ROD AND PISTON GROUP

9N3538 CONNECTING ROD AND PISTON GROUP
--8 Required
Also part of 9N5190 Short Block Group shown on Page 61
c304006 SEBP1243
9N3538 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 8N-7294 C [2] RETAINER-PIN  
3. 9N-3504 [1] ROD AS-CONNECTING  
  9N-5082 C [1] BEARING-CONNECTING ROD  
4. 9N-3832 C [2] BOLT-CONNECTING ROD  
  9L-7669 [2] NUT-CONNECTING ROD  
5. 9N-5790 CL [1] BEARING-CONNECTING ROD  
  9N-5920 AC [1] BEARING .25MM(.010IN)US  
  9N-5921 AC [1] BEARING .51MM(.020IN)US  
  9N-5922 AC [1] BEARING 1.27MM(.050IN)US  
6. 9N-5409 CJL [1] PISTON GP  
  9N-5405 C [1] BODY AS-PISTON  
7. 9L-6233 L [1] RING-PISTON-TOP  
8. 9L-9316 L [1] RING-PISTON (OIL)  
9. 9N-5408 ACN [1] PISTON GP .508MM(.02IN)  
  9N-5406 C [1] BODY AS-PISTON  
10. 9L-9673 N [1] RING-PISTON (OIL)  
11. 9N-0581 N [1] RING-PISTON-TOP  
12. 9N-5410 ACN [1] PISTON GP 1.016MM(.04IN)  
  9N-5407 C [1] BODY AS-PISTON  
13. 9L-9323 N [1] RING-PISTON (OIL)  
14. 9N-0578 N [1] RING-PISTON-TOP  
   
  9N-0875 [1] RING GP-PISTON (FOR PART MARKED J-  
    INCL COMPLETE SET OF
    RINGS FOR ONE PISTON)
    L-STANDARD
    N-OVERSIZE
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12430116
 

9N-6435: CONNECTING ROD AND PISTON GROUP

9N6435 CONNECTING ROD AND PISTON GROUP
--Offset Pin--8 Required
Also part of 9N5190 Short Block Group shown on Page 61
c178112 SEBP1243
9N6435 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 8N-8064 [2] RETAINER-PIN  
3. 9N-3504 [1] ROD AS-CONNECTING  
  9N-5082 C [1] BEARING-CONNECTING ROD  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
  9L-7669 [2] NUT-CONNECTING ROD  
5. 9N-5790 L [1] BEARING-CONNECTING ROD  
  6N-9837 A [1] BEARING-CONNECTING ROD .254MM(.01IN)UNDERSIZE  
  6N-9838 A [1] BEARING-CONNECTING ROD .508MM(.02IN)UNDERSIZE  
  7N-4352 A [1] BEARING-CONNECTING ROD 1.27MM(.05IN)UNDERSIZE  
6. 9N-6431 J [1] PISTON GP (STANDARD)  
  9N-6337 [1] BODY AS-PISTON  
7. 9L-6233 L [1] RING-PISTON-TOP  
8. 9L-9316 L [1] RING-PISTON (OIL)  
9. 1W-2071 AN [1] PISTON GP .508MM(.02IN)  
10. 9L-9673 N [1] RING-PISTON (OIL)  
11. 9N-0581 N [1] RING-PISTON-TOP  
12. 1W-2073 AN [1] PISTON GP 1.016MM(.04IN)  
13. 9L-9323 N [1] RING-PISTON (OIL)  
14. 9N-0578 N [1] RING-PISTON-TOP  
   
  9N-0875 [1] RING GP-PISTON (FOR PART MARKED J-  
    INCL COMPLETE SET OF
    RINGS FOR ONE PISTON)
    L-STANDARD
    N-OVERSIZE
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12430117
 

1N-3563: CONNECTING ROD AND PISTON GROUP

1N3563 CONNECTING ROD AND PISTON GROUP
--8 Required
c178114 SEBP1243
1N3563 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 8N-7294 C [2] RETAINER-PIN  
3. 9N-3504 [1] ROD AS-CONNECTING  
  9N-5082 C [1] BEARING-CONNECTING ROD  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
  9L-7669 [2] NUT-CONNECTING ROD  
5. 9N-5790 [1] BEARING-CONNECTING ROD (STANDARD)  
  9N-5920 A [1] BEARING .25MM(.010IN)UNDERSIZE  
  9N-5921 A [1] BEARING .51MM(.020IN)UNDERSIZE  
  9N-5922 A [1] BEARING 1.27MM(.050IN)UNDERSIZE  
6. 1N-3227 [1] BODY AS-PISTON  
7. 9L-9316 [1] RING-PISTON (OIL)  
8. 9L-6233 [1] RING-PISTON-TOP  
  9N-0875 A [1] RING GP-PISTON (INCLUDES A COMPLETE SET  
    OF RINGS FOR ONE PISTON)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12430118
 

9N-1105: CYLINDER HEAD GROUP

9N1105 CYLINDER HEAD GROUP--Part 1 of 2
c227148 SEBP1243
9N1105 CYLINDER HEAD GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG-PIPE  
2. 5M-6213 [3] PLUG-PIPE  
3. 0L-1329 [8] BOLT (1/2-13X3 IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5 IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25 IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75 IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25 IN)(LOCATION G)  
9. 9N-3111 [2] CYLINDER HEAD AS  
    (EACH INCLUDES)
  9L-7657 [1] PLUG-CUP  
10. 9N-2837 [4] INSERT-SEAT (EXHAUST)  
11. 0L-1329 [3] BOLT (1/2-13X3 IN)(LOCATION H)  
12. 8M-5860 [4] PLUG-CUP  
13. 5M-6214 [1] PLUG-PIPE  
14. 5M-6213 [1] PLUG-PIPE  
15. 0S-1571 [1] BOLT (3/8-16X1.75 IN)(LOCATION C-LEFT HEAD)  
  9L-9166 [1] STUDBOLT (3/8-16X3.63 IN)(LEFT HEAD)  
16. 9L-8889 [16] WASHER  
17. 9N-3387 [16] SPRING-VALVE OUTER  
18. 9L-9425 [16] RETAINER-SPRING  
19. 2A-4429 [32] LOCK-RETAINER  
20. 9L-9164 [2] GASKET-CYLINDER HEAD  
21. 9L-7683 [8] VALVE-EXHAUST  
22. 9L-7682 [8] VALVE-INLET  
  2N-8943 A [8] INSERT-VALVE SEAT (INLET)  
23. 9N-0906 [16] SPACER  
 

#SEBP12430119
 

9N-1105: CYLINDER HEAD GROUP

9N1105 CYLINDER HEAD GROUP--Part 2 of 2
c227149 SEBP1243
9N1105 CYLINDER HEAD GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT 4.44CM(1.75IN)LG  
    (LOCATION C-LEFT HEAD)
  9L-9166 [1] STUDBOLT 9.14CM(3.6IN)LG  
    (RIGHT HEAD)
2. 9N-0906 [16] SPACER-SPRING SEAT  
3. 9N-3387 [16] SPRING-VALVE OUTER  
4. 9L-9425 [16] RETAINER-SPRING  
5. 2A-4429 [32] LOCK-RETAINER  
6. 9L-9164 [2] GASKET-CYLINDER HEAD  
7. 9L-7683 [8] VALVE-EXHAUST  
8. 9L-7682 [8] VALVE-INLET  
  2N-8943 A [8] INSERT-INTAKE  
9. 9L-8889 [16] WASHER  
  A   NOT PART OF THIS GROUP
 

Information:

Engine News
Engines Can Use Crankshafts With Either Six Or Eight Counterweights
1979/09/19
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Comparison And Applications Of Six And Eight Counterweight Crankshafts
1981/09/16
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter
1981/10/21
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Specifications For Installation Of Crankshaft Counterweight Bolts
1983/04/27
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1983/09/14
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Has Longer Service Life
1985/02/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper
1986/01/01
New Front Crankshaft Seal Requires New Installer Tool
1989/06/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Lightening Holes Not Drilled In Some Crankshafts
1977/01/28
Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange
1977/09/07
Special Instruction
Installation of 0R1210 or 0R1211 Undersize Crankshafts{1202, 1230}
Installation of 0R1210 or 0R1211 Undersize Crankshafts{1202, 1230}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft Seals
3208 INDUSTRIAL & MARINE ENGINES
Crankshaft
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3208 INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3208 INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal
3208 INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3208 INDUSTRIAL & MARINE ENGINES
Crankshaft & Gear
3208 INDUSTRIAL & MARINE ENGINES
Bearing Clearances
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter{1205,1165}
1981/10/05
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Lightening Holes Not Drilled In Some Crankshafts{1202}
1977/01/24
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Check For Extra Holes In Crankshaft Flange If Oil Leaks From Between The Flywheel And Crankshaft Flange{1156,1202}
1977/09/05
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing {1203}
1987/06/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Engines Can Use Crankshafts With Either Six Or Eight Counterweights {1202}
1979/09/10
New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3208 :

CRANKSHAFT SEAL GROUP
9N-0542 CRANKSHAFT SEAL GROUP
CRANKSHAFT COVER GROUP
9N-0399 CRANKSHAFT COVER GROUP
CRANKSHAFT GROUP
9N-6222 CRANKSHAFT GROUP
CRANKSHAFT GROUP
9N-2133 CRANKSHAFT GROUP
CRANKSHAFT GROUP
9N-2017 CRANKSHAFT GROUP
CYLINDER BLOCK PANEL GROUP
9L-6560 CYLINDER BLOCK PANEL GROUP
CYLINDER BLOCK PANEL GROUP
9L-6560 CYLINDER BLOCK PANEL GROUP
CYLINDER BLOCK COVER GROUP
9L-6065 CYLINDER BLOCK COVER GROUP
CRANKSHAFT PULLEY GROUP
9L-7461 CRANKSHAFT PULLEY GROUP
PULLEY AND DAMPER GROUP
9N-0787 PULLEY AND DAMPER GROUP
PULLEY AND DAMPER GROUP
9N-0787 PULLEY AND DAMPER GROUP
CAMSHAFT GROUP
9N-0728 CAMSHAFT GROUP
CONNECTING ROD AND PISTON GROUP
9N-3538 CONNECTING ROD AND PISTON GROUP
CONNECTING ROD AND PISTON GROUP
9N-6435 CONNECTING ROD AND PISTON GROUP
CONNECTING ROD AND PISTON GROUP
1N-3563 CONNECTING ROD AND PISTON GROUP
CYLINDER HEAD GROUP
9N-1105 CYLINDER HEAD GROUP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.