AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 5 --Type 1 Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131 3208


FUEL SYSTEM
GOVERNOR GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 INDUSTRIAL ENGINE 90N37285-52892 SEBP1243 3208 90N   (2018)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1863 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1863 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
 

#SEBP12430290
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 5
--Type 1
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and
Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c228834 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [8] BONNET  
2. 9L-9424 [8] SPRING  
  9B-1320 [8] VALVE  
3. 4N-0218 [8] BUSHING  
4. 6N-7527 [8] PLUNGER & BARREL ASSEM.  
    (Each Includes)
5. 4N-2728 C [1] WASHER  
6. 4N-4318 [1] SPRING  
7. 4N-2685 [8] ROLLER  
8. 6N-6794 [8] LIFTER  
9. 4N-0224 [8] RING  
10. 4N-0223 [8] SEAL  
  C   INDICATES CHANGE
 

#SEBP12430291
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 5
--Type 1
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and
Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c228835 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2773 [1] SHAFT AS-CONTROL  
2. 1D-4716 [1] NUT-FULL  
3. 4N-2708 [1] SETSCREW  
4. 4N-0528 [1] SHAFT-LEVER  
5. 4N-9828 [1] SHAFT AS-CONTROL  
6. 4N-3922 [1] LEVER AS-CONNECTION  
7. 2N-2658 [10] BOLT-SOCKET HEAD  
8. 4N-1763 [8] LEVER-CONTROL  
9. 4N-0563 [1] LEVER-SHAFT CONNECTION  
10. 9L-6807 [1] SHAFT-CONTROL  
11. 4N-1809 [1] LEVER AS-SEAT  
12. 031-0214 [2] BOLT-SELF LOCKING  
13. 9M-1311 [1] NUT-JAM  
14. 6N-4176 [1] SCREW-SET  
15. 4N-0445 [1] LEVER-LOAD STOP  
16. 4N-0523 [1] DOWEL-STOP SUPPORT  
17. 2D-6392 [2] SEAL-O-RING  
18. 4N-3329 [2] WASHER  
19. 6N-7523 [1] WASHER  
20. 8F-8178 [1] BOLT  
21. 1D-4533 [3] BOLT  
22. 2A-4781 [3] BOLT  
   
   
   
   
23. 6N-7524 [1] HOUSING AS-GOVERNOR  
24. 4N-2333 [1] PIN-SPRING  
25. 8S-6814 [2] PIN  
26. 9L-9503 [1] DOWEL-HOLLOW  
27. 9S-4182 [1] PLUG  
28. 3J-7354 [1] SEAL-O-RING  
29. 4N-2786 [1] SEAL-LIP TYPE  
30. 2M-7819 [1] RING-RETAINING  
31. 4N-2677 [1] LEVER AS-RISER  
32. 3H-0442 [1] SEAL-O-RING  
 

#SEBP12430292
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 5
--Type 1
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and
Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c228836 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING  
6. 6N-1729 [1] COVER  
7. 6D-3031 [4] SCREW  
8. 4N-0941 [1] LEVER  
9. 4N-0505 [1] GASKET  
10. 4N-0935 [1] SHUT-OFF HOUSING ASSEM.  
    (Includes)
  4N-3713 [1] SEAL  
11. 4N-0595 [1] GASKET  
12. 9N-3754 [1] HOUSING ASSEM.  
    (Includes)
  4N-5050 [1] PLUG  
13. 4N-9150 [2] DEFLECTOR  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL  
16. 6N-1078 [1] BEARING  
17. 4N-3711 [1] BEARING  
18. 4N-2333 [1] PIN  
19. [8] PIN  
20. 4N-5481 [1] STUD  
21. 1P-4001 [1] FITTING  
22. 4N-0556 GASKET  
23. 4N-0532 [1] GASKET  
24. 4N-0531 [1] COVER  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT  
27. 4N-0940 [1] LEVER  
28. 4N-0937 [1] SHAFT  
 

#SEBP12430293
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 5
--Type 1
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and
Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c228837 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1359 [1] FLANGE  
2. 2M-5471 C [2] BOLT  
3. 4N-3088 [1] GASKET  
4. 6N-1716 [1] VALVE ASSEM.  
5. 3J-7354 [1] SEAL  
6. 9F-6641 [4] BOLT  
7. 4N-2954 [1] SLEEVE  
8. 4N-1132 [1] BODY ASSEM.  
    (Includes)
9. 8S-6814 [1] DOWEL  
10. 4N-1584 [1] SEAL  
11. 4N-0636 [1] SEAL  
12. 8H-9804 [1] SHAFT  
13. 4N-0429 [1] GEAR (15 teeth)  
14. 4N-0406 [1] GEAR (10 teeth)  
15. 5M-6509 [1] SEAL  
16. 4N-1767 [1] VALVE  
17. 4N-0605 [1] SPRING  
18. 4N-0975 [1] GASKET  
19. 7N-1364 [1] FLANGE ASSEM.  
    (Includes)
20. 1P-2298 [1] VALVE ASSEM.  
  C   INDICATES CHANGE
 

#SEBP12430294
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 5 of 5
--Type 1
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and
Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 and 131
c228838 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 4N-5579 [1] SEAT AS-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  4N-2401 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 9N-3751 [1] CAMSHAFT-FUEL PUMP  
13. 4N-0446 [1] CARRIER  
14. 4N-2955 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
 

#SEBP12430295
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 5
--Type 2
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor
and Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c232283 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [8] BONNET-VALVE  
2. 9L-9424 [8] SPRING-VALVE  
  9B-1320 [8] VALVE-CHECK  
3. 4N-0218 [8] BUSHING  
4. 6N-7527 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
5. 4N-2728 [1] WASHER-RETAINER  
6. 9N-5862 C [1] SPRING-LIFTER  
7. 4N-2685 [8] ROLLER-LIFTER  
8. 6N-6794 [8] LIFTER-PLUNGER  
9. 4N-0224 [8] RING-RETAINER  
10. 6F-6672 C [8] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12430296
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 5
--Type 2
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor
and Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c172895 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2773 [1] SHAFT AS-CONTROL  
2. 1D-4716 [1] NUT-FULL  
3. 4N-2708 [1] SETSCREW  
4. 4N-0528 [1] SHAFT-LEVER  
5. 4N-9828 [1] SHAFT AS-CONTROL  
6. 4N-3922 [1] LEVER AS-CONNECTION  
7. 2N-2658 [10] BOLT-SOCKET HEAD  
8. 4N-1763 [8] LEVER-CONTROL  
9. 4N-0563 [1] LEVER-SHAFT CONNECTION  
10. 9L-6807 [1] SHAFT-CONTROL  
11. 4N-1809 [1] LEVER AS-SEAT  
12. 031-0214 [2] BOLT-SELF LOCKING  
13. 9M-1311 [1] NUT-JAM  
14. 6N-4176 [1] SCREW-SET  
15. 4N-0445 [1] LEVER-LOAD STOP  
16. 4N-0523 [2] DOWEL-STOP SUPPORT  
17. 2D-6392 [2] SEAL-O-RING  
18. 4N-3329 [2] WASHER  
19. 6N-7523 [1] WASHER  
20. 8F-8178 [1] BOLT  
21. 1D-4533 [3] BOLT  
22. 2A-4781 [3] BOLT  
   
   
   
   
23. 8N-3946 C [1] HOUSING AS-GOVERNOR  
24. 4N-2333 [1] PIN-SPRING  
25. 8S-6814 [2] PIN  
26. 9L-9503 [1] DOWEL-HOLLOW  
27. 9S-4182 [1] PLUG  
28. 3J-7354 [1] SEAL-O-RING  
29. 8N-3945 [1] BUSHING  
30. 4N-2786 [1] SEAL-LIP TYPE  
31. 4N-2677 [1] LEVER AS-RISER  
32. 3H-0442 [1] SEAL-O-RING  
33. 2M-7819 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12430297
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 5
--Type 2
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor
and Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c173850 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING  
6. 6N-1729 [1] COVER  
7. 6D-3031 [4] SCREW  
8. 4N-0941 [1] LEVER  
9. 4N-0505 [1] GASKET  
10. 4N-0935 [1] SHUT-OFF HOUSING ASSEM.  
    (Includes)
  4N-3713 [1] SEAL  
11. 4N-0595 [1] GASKET  
12. 9N-3754 [1] HOUSING ASSEM.  
    (Includes)
  4N-5050 [1] PLUG  
13. 4N-9150 [1] DEFLECTOR  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL  
16. 6N-1078 [1] BEARING  
17. 4N-3711 [1] BEARING  
18. 4N-2333 [1] PIN  
19. 8N-0984 C [8] PIN  
20. 4N-5481 [1] STUD  
21. 1P-4001 [1] FITTING  
22. 4N-0556 [1] GASKET  
23. 4N-0532 [1] GASKET  
24. 4N-0531 [1] COVER  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT  
27. 4N-0940 [1] LEVER  
28. 4N-0937 [1] SHAFT  
  C   INDICATES CHANGE
 

#SEBP12430298
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 5
--Type 2
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor
and Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c232284 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1359 [1] FLANGE-INLET  
2. 2M-5471 [2] BOLT  
3. 4N-3088 [1] GASKET-INLET  
4. 6N-1716 [1] VALVE AS  
5. 3J-7354 [1] SEAL-O-RING  
6. 9F-6641 [4] BOLT  
7. 4N-2954 [1] SLEEVE-CAMSHAFT  
8. 4N-1132 [1] BODY AS-TRANSFER PUMP  
9. 8S-6814 [1] PIN  
10. 4N-1584 [1] SEAL-LIP TYPE  
11. 4N-0636 [1] SEAL-LIP TYPE  
12. 8H-9804 [1] SHAFT-PUMP IDLER  
13. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
14. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
15. 5M-6509 [1] SEAL-O-RING  
16. 4N-1767 [1] VALVE-BYPASS  
17. 4N-0605 [1] SPRING  
18. 4N-0975 [1] GASKET-CHECK VALVE  
19. 7N-1364 [1] FLANGE AS-CHECK VALVE  
20. 1P-2298 [1] VALVE AS  
 

#SEBP12430299
 

9N-3755: GOVERNOR AND FUEL INJECTION PUMP GROUP

9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 5 of 5
--Type 2
Part of 9N5180, 9N3756, 8N1008, 8N1039, 8N1040, 8N1047 and 8N1045 Governor and
Fuel Injection Pump Groups shown on Pages 125, 126A, 127, 128, 129, 130 & 131
c174403 SEBP1243
9N3755 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 4N-5579 [1] SEAT AS-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  4N-2401 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 9N-3751 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 C [1] CARRIER-WEIGHT  
14. 8N-2662 C [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04
New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other
1980/10/01
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL & MARINE ENGINES
Check Valve & Bypass Valve
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3208 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog 3208 :

GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1863 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1863 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1863 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1863 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8N-8595 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8N-5907 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8N-5903 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8N-5638 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-3755 GOVERNOR AND FUEL INJECTION PUMP GROUP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.