AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T0383 PISTON PUMP GROUP 9T1074-PAGE 82.02 PART OF 5G4570 PUMP AND LINES AN ATTACHMENT D3B TRACK-TYPE TRACTOR


POWER TRAIN
PUMP GP
VALVE GP-RELIEF
DRIVE GP-FINAL
KIT
GEAR GP

TRACK-TYPE TRACTOR D3B TRACK-TYPE TRACTOR 27Y
 D3 TRACTOR / POWER SHIFT / 27Y00001-05173 (MACHINE) POWERED BY 3204 ENGINE SEBP1252 D3B 27Y   (1979)

POWER TRAIN

PUMP GP
8Y-1300 PUMP & LINES GP
PUMP GP-PISTON
3G-4096 PUMP GP-PISTON
PUMP GP-PISTON
4T-0383 PUMP GP-PISTON
VALVE GP-SERVO
9T-1074 VALVE GP-SERVO
VALVE GP-SERVO
3G-7421 VALVE GP-SERVO
 

#SEBP12520270
 

4T-0383: PUMP GP-PISTON

4T0383 PISTON PUMP GROUP
9T1074-PAGE 82.02
PART OF 5G4570 PUMP AND LINES
AN ATTACHMENT
c337492 SEBP1252
4T0383 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3721 [4] SCREW  
2. 6V-5586 [1] SEAL-O-RING  
3. 3G-3698 [1] PISTON  
4. 3G-3493 [1] PLATE-CAMSHAFT  
5. 5H-8985 [1] PIN-SPRING  
6. 3G-1243 [1] BUTTON-PIVOT  
7. 3G-1237 [1] COLLAR-SPRING  
8. 3G-3723 [1] SPRING  
9. 5P-1827 [2] RACE-BEARING-THRUST  
10. 5P-1828 [1] BEARING-THRUST  
11. 3G-3734 [1] SEAL-LIP TYPE  
12. 008-3214 [1] RING-RETAINING  
13. 3G-3496 [1] SHAFT  
14. 5L-4019 [2] RING-RETAINING  
15. 3G-3722 [1] WASHER  
16. 6J-2419 [2] SEAL-O-RING  
17. 3G-3716 [2] RACE  
18. 3G-3495 [1] HOUSING AS  
19. 5P-1941 [1] BEARING-NEEDLE  
20. 6B-6863 [2] PIN-SPRING  
21. 0S-1588 [4] BOLT  
22. 9T-1077 [1] PLATE AS  
23. 9T-1074 Y [1] VALVE GP-SERVO  
24. 3G-7426 [1] GASKET  
25. 8G-8988 [1] KIT (ROTATING)  
26. 2R-1230 [2] RING-RETAINING  
27. 3G-3494 [1] GASKET  
28. 7F-7984 [2] BEARING-NEEDLE  
29. 3G-3718 [2] COVER  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  9T-1073 [1] KIT-SEAL (SEAL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12520271
 

9T-1074: VALVE GP-SERVO

9T1074 SERVO VALVE GROUP
PART OF 4T0383 PISTON PUMP
AN ATTACHMENT
c337493 SEBP1252
9T1074 VALVE GP-SERVO Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8007 [2] PLUG  
2. 7J-0204 [2] SEAL  
3. 9T-1079 [1] PIVOT  
4. 3G-5423 [1] SPRING  
5. 7J-9933 [1] SEAL  
6. 6F-4855 [1] SEAL  
7. 4T-1911 [1] CAP  
8. 9M-1311 [1] NUT  
9. 4T-1912 [1] COVER  
10. 4T-1914 [1] SETSCREW  
11. 9T-1072 [1] CONNECTOR  
12. 3J-1907 [1] SEAL  
13. 9T-1071 [1] SPRING  
14. 9T-1081 [1] PIVOT  
15. 3G-5037 B [3] SHIM .127MM(.005IN.)THK.  
  3G-5038 B [2] SHIM .152MM(.006IN.)THK.  
  3G-5039 B [2] SHIM .203MM(.008IN.)THK.  
  3G-5040 B [2] SHIM .508MM(.020IN.)THK.  
16. 4T-1913 [1] CAP  
  B   USE AS REQUIRED
 

#SEBP12520272
 

3G-7421: VALVE GP-SERVO

3G7421 SERVO VALVE GROUP
PART OF 3G4096 PISTON PUMP GROUP SHOWN ON PAGE 82
AN ATTACHMENT
c170001 SEBP1252
3G7421 VALVE GP-SERVO Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-5422 [1] CAP  
2. 7J-9933 [1] SEAL  
3. 3G-5421 [1] STOP  
4. 6L-7219 [2] WASHER  
5. 3G-3697 [3] SHIM .0762 mm(.003 in.) thick  
6. 6J-6516 [2] SHIM .254 mm(.010 in.) thick  
7. 3G-5423 [1] SPRING  
8. 3G-5424 [1] RETAINER  
9. 3G-5035 [1] SPRING  
10. 3G-3732 [1] STOP  
11. 3G-5039 [2] SHIM .2032mm(.008 in.) thick  
  3G-5037 [2] SHIM .1270mm (.005 in.) thick  
  3G-5040 [2] SHIM .5080mm(.020 in.) thick  
  3G-5038 [1] SHIM .1524mm(.006 in.) thick  
12. 5P-7813 [1] SEAL  
13. 3G-7409 [1] CONNECTOR  
 

#SEBP12520273
 

9J-0798: VALVE GP-RELIEF

9J0798 RELIEF VALVE GROUP-PILOT OPERATED
PART OF 5G2338 PUMP AND LINES AND 1U2576 AND 3G5634 VALVE GROUPS SHOWN ON
PAGES 80, 138B AND 139
c300561 SEBP1252
9J0798 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-2824 [2] SEAL-O-RING  
2. 9J-0707 [1] RING-BACK-UP  
3. 6F-4855 [1] SEAL-O-RING  
4. 1H-1023 [1] SEAL-O-RING  
5. 030-0167 [1] RING-BACK-UP  
 

#SEBP12520274
 

6S-3604: FINAL DRIVE GP

6S3604 FINAL DRIVE GP-PART 1 OF 2
S/N 27Y1-3687
c220787 SEBP1252
6S3604 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-3203 [2] DRUM-STEERING CLUTCH  
2. 7K-8238 [2] FLANGE  
3. 6H-1717 [28] BOLT  
4. 2M-0849 [28] WASHER  
5. 6S-6521 [2] CAGE-BEARING  
6. 2K-4973 C [12] LOCKNUT  
7. 5K-8591 [2] BEARING-OUTER  
  3B-3969 [2] RACE-BEARING-INNER (INNER)  
8. 6S-6512 [2] PINION  
9. 3K-5595 [2] BEARING-OUTER  
10. 3K-5596 [2] RACE-BEARING (INNER)  
11. 6S-3204 [2] COVER-FINAL DRIVE  
  1B-5174 [4] PLUG-PIPE  
12. 6S-3177 [2] GEAR (56 TEETH)  
13. 0S-1595 C [16] BOLT  
  1F-7958 [24] NUT-FULL  
14. 7M-7260 B LIQUID GASKET  
15. 2H-3935 [2] SEAL-O-RING  
16. 3K-9619 [2] SEAL-LIP TYPE  
17. 1H-9456 [4] BOLT  
18. 5V-0659 C [2] LOCK-NUT  
19. 2J-5815 [2] NUT-SPECIAL  
  5G-0695 [2] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12520275
 

6S-3604: FINAL DRIVE GP

6S3604 FINAL DRIVE GP-PART 2 OF 2
S/N 27Y1-3687
c220788 SEBP1252
6S3604 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-3192 [2] RETAINER  
2. 0S-1595 C [12] BOLT  
3. 6S-4531 [2] LOCKNUT  
4. 6S-8270 [2] SPROCKET-TRACK  
5. 5P-9121 CR [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5P-9120 [2] RING-SEALING  
6. 6S-6816 [2] LOCK-NUT  
7. 3B-1915 C [12] BOLT  
8. 7H-3607 C [20] NUT  
9. 9B-2962 [2] NUT  
  6S-4535 [2] GASKET  
10. 7M-7260 B LIQUID GASKET  
11. 5G-0319 [2] SHAFT  
12. 1H-8278 [2] SEAL-O-RING  
13. 5P-7208 [2] SPACER-CONE  
14. 2P-8387 [2] SPACER-CUP  
15. 1P-3934 [4] CUP-ROLLER BEARING  
  1P-3935 [4] CONE-ROLLER BEARING  
16. 3K-3815 [20] BOLT-SPECIAL HEAD  
17. 2K-4973 C [12] LOCKNUT  
18. 6S-3194 [2] CAGE-BEARING  
19. 6S-2905 [2] BEARING-OUTER  
20. 3B-3967 [2] RACE-ROLLER BEARING (INNER)  
   
    THE FOLLOWING PART IS
    AVAILABLE FOR
    REPLACEMENT OF WORN
    SPROCKET RIM:
  6S-7880 B RIM-SPROCKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12520276
 

6S-3604: FINAL DRIVE GP

6S3604 FINAL DRIVE GP-PART 1 OF 2
S/N 27Y3688-UP
8C6493 BEARING KIT IS AVAILABLE FOR COMPLETE REPLACEMENT OF FINAL DRIVE
BEARINGS FOR ONE FINAL DRIVE
c350263 SEBP1252
6S3604 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-3203 [2] DRUM-STEERING CLUTCH  
2. 7K-8238 [2] FLANGE  
3. 6H-1717 [28] BOLT  
4. 5P-8245 C [28] WASHER  
5. 6S-6521 [2] CAGE-BEARING  
6. 2K-4973 [12] LOCKNUT  
7. 5K-8591 [2] BEARING-OUTER  
  3B-3969 [2] RACE-BEARING-INNER (INNER)  
8. 5G-5846 C [2] PINION (9 TEETH)  
9. 3K-5595 [2] BEARING-OUTER  
10. 3K-5596 [2] RACE-BEARING (INNER)  
11. 6S-3204 [2] COVER-FINAL DRIVE  
  1B-5174 [4] PLUG-PIPE  
12. 5G-5847 C [2] GEAR (50 TEETH)  
13. 0S-1585 C [16] BOLT  
14. 7M-7260 B LIQUID GASKET  
15. 2H-3935 [2] SEAL-O-RING  
16. 3K-9619 [2] SEAL-LIP TYPE  
17. 1H-9456 [4] BOLT  
18. 5V-0659 [2] LOCK-NUT  
19. 2J-5815 [2] NUT-SPECIAL  
  5G-0695 [2] SEAL  
20. 1F-7958 C [24] NUT-FULL  
21. 5P-7213 C [40] WASHER-HARD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12520277
 

6S-3604: FINAL DRIVE GP

6S3604 FINAL DRIVE GP-PART 2 OF 2
S/N 27Y3688-UP
8C6493 BEARING KIT IS AVAILABLE FOR COMPLETE REPLACEMENT OF FINAL DRIVE
BEARINGS FOR ONE FINAL DRIVE
c350264 SEBP1252
6S3604 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-3192 [2] RETAINER  
2. 0S-1585 C [12] BOLT  
3. 6S-4531 [2] LOCKNUT  
4. 5G-6082 C [2] SPROCKET-TRACK  
5. 5P-9121 R [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5P-9120 [2] RING-SEALING  
6. 6S-6816 [2] LOCK-NUT  
7. 3B-1915 [12] BOLT  
8. 7H-3607 [20] NUT  
9. 9B-2962 [2] NUT  
  6S-4535 [2] GASKET  
10. 7M-7260 B LIQUID GASKET  
11. 5G-0319 [2] SHAFT  
12. 1H-8278 [2] SEAL-O-RING  
13. 5P-7208 [2] SPACER-CONE  
14. 2P-8387 [2] SPACER-CUP  
15. 1P-3934 [4] CUP-ROLLER BEARING  
  1P-3935 [4] CONE-ROLLER BEARING  
16. 3K-3815 [20] BOLT-SPECIAL HEAD  
17. 2K-4973 [12] LOCKNUT  
18. 6S-3194 [2] CAGE-BEARING  
19. 6S-2905 [2] BEARING-OUTER  
20. 3B-3967 [2] RACE-ROLLER BEARING (INNER)  
21. 5P-7213 C [12] WASHER-HARD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12520278
 

8C-8994: KIT-TRANSMISSION BEARING

8C8994 BEARING KIT-TRANSMISSION
PROVIDES COMPLETE REPLACEMENT OF TRANSMISSION BEARINGS
FIELD INSTALLATION
SEBP12520278 SEBP1252
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6V-2753 [6] BEARING  
  5P-3131 [3] BEARING AS-ROLLER  
  6H-3957 [1] BEARING-BALL  
  1T-0334 [1] BEARING-BALL  
  9N-1542 [1] BEARING-BALL  
  5M-2055 [3] BEARING-CAGED  
  5P-8353 [1] BEARING-ROLLER  
  5P-3134 [2] BEARING-SPECIAL BALL  
  4S-8538 [1] BEARING-SPECIAL BALL  
  5P-3133 [1] BEARING-SPECIAL BALL  
   
  9S-7950 [2] CONE-ROLLER BEARING  
  9S-7949 [2] CUP-ROLLER BEARING  
   
  9P-7516 [12] WASHER-RETAINING  
  6P-3910 [12] WASHER-THRUST  
 

#SEBP12520279
 

5G-1224: GEAR GP-BEVEL

5G1224 BEVEL GEAR GROUP-PART 1
c401981 SEBP1252
5G1224 GEAR GP-BEVEL Parts scheme
  For full view, you need register

Parts for your D3B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-3117 [1] SHAFT-BEVEL PINION  
2. 7J-8893 [1] CONE-ROLLER BEARING  
3. 7J-8894 [1] CUP-ROLLER BEARING  
4. 5F-3106 [1] SEAL-O-RING  
5. 6S-3160 [2] SHIM PACK  
6. 9H-6079 [1] SEAL-LIP TYPE  
7. 6S-4181 [1] GUARD-DIRT  
8. 6S-3161 [1] SHIM PACK  
9. 6F-7030 [2] BOLT  
10. 0T-0329 [1] LOCK-NUT  
11. 6S-4062 [1] UNIVERSAL JOINT GP  
  6K-0316 [2] SPIDER & BEARING AS  
  2D-4867 [1] FITTING-HYDRAULIC  
11A. 6S-4017 [1] PLATE  
13. 5D-4184 [8] BOLT  
14. 1B-0581 C [8] BOLT  
  9M-1974 C [8] WASHER  
15. 6S-3158 [1] YOKE  
16. 2K-1722 [1] WASHER-RETAINER  
17. 4F-7389 [1] SEAL-O-RING  
18. 0S-1588 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
19. 7K-8876 [1] CUP-BEARING  
20. 7K-8877 [1] CONE-BEARING  
21. 6S-3213 [1] HOUSING  
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog D3B :

PUMP GP-PISTON
3G-4096 PUMP GP-PISTON
8Y-1300 PUMP & LINES GP
PUMP & LINES GP
5G-4570 PUMP & LINES GP
PUMP & LINES GP
5G-4570 PUMP & LINES GP
PUMP & LINES GP
5G-2338 PUMP & LINES GP
PUMP & LINES GP
5G-2338 PUMP & LINES GP
PUMP & LINES GP
5G-2338 PUMP & LINES GP
PUMP & LINES GP
5G-2338 PUMP & LINES GP
VALVE GP-SERVO
9T-1074 VALVE GP-SERVO
VALVE GP-SERVO
3G-7421 VALVE GP-SERVO
VALVE GP-RELIEF
9J-0798 VALVE GP-RELIEF
FINAL DRIVE GP
6S-3604 FINAL DRIVE GP
FINAL DRIVE GP
6S-3604 FINAL DRIVE GP
FINAL DRIVE GP
6S-3604 FINAL DRIVE GP
FINAL DRIVE GP
6S-3604 FINAL DRIVE GP
8C-8994 KIT-TRANSMISSION BEARING

Truck sale:

 
 
Caterpillar D3B
- Crawler dozers
ZIEGLER CAT
Caterpillar D3B, Bulldozer, Bau-Und Bergbauausrüstung
22.000 
Caterpillar D3B, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
MICHIGAN CAT
Caterpillar D3B, Bulldozer, Bau-Und Bergbauausrüstung
15.385 
Caterpillar D3B, Bulldozer, Bau-Und Bergbauausrüstung
- Crawler dozers
MILTON CAT
Caterpillar CAT BUCKET- HD 42 1.52 YD3 (B)- 320, schaufel, Bau-Und Bergbauausrüstung
6.500 
Caterpillar CAT BUCKET- HD 42 1.52 YD3 (B)- 320, schaufel, Bau-Und Bergbauausrüstung
- bucket
PUCKETT MACHINERY CO.
Caterpillar CAT BUCKET- HD 42 1.52 YD3 (B)- 320, schaufel, Bau-Und Bergbauausrüstung
5.000 
Caterpillar CAT BUCKET- HD 42 1.52 YD3 (B)- 320, schaufel, Bau-Und Bergbauausrüstung
- bucket
PUCKETT MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.