4N241 STARTING MOTOR GROUP-12 VOLT-TYPE 1.PART OF 4N190 ELECTRIC STARTING MOTOR GROUP SHOWN ON PAGE 41.4N6938 AND 8N410 SWITCH PARTS ARE SHOWN ON PAGE 43 910

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

0. 4N-0241 STARTING M
1. 4N-0241 STARTING M

SWITCH GP

2. 8N-0410 SWITCH GP
3. 4N-6938 SWITCH AS
4. 8N-0410 SWITCH GP
5. 9G-5517 SWITCH AS

STARTING AID GP

6. 5G-1550 STARTING A

BATTERY GP

7. 6S-3548 BATTERY GP

WIRING GP

8. 5G-2203 WIRING & L
9. 5G-2203 WIRING & L
0. INFORMATION

COMPACT WHEEL LOADER 910 COMPACT WHEEL LOADER 41Y
910 WHEEL LOADER 41Y00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1255 910 41Y (1979)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

4N-0190 STARTING MOTOR GP-ELECTRIC

4N-0241 STARTING MOTOR GP-ELECTRIC

#SEBP12550180

4N-0241: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

4N241 STARTING MOTOR GROUP-12 VOLT-TYPE 1.PART OF 4N190 ELECTRIC
STARTING MOTOR GROUP SHOWN ON PAGE 41.4N6938 AND 8N410 SWITCH PARTS
ARE SHOWN ON PAGE 43

c223553 SEBP1255

4N0241 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0410 CY	[1]	SWITCH GROUP
			(Separate Illustration)
2.	4N-7473	[1]	HOUSING ASSEM.
3.	4N-7472	[1]	COVER
4.	4N-7475	[1]	SEAL
5.	4N-6938 Y	[1]	SWITCH ASSEM.
			(Separate Illustration)
6.	2J-8163	[1]	SEAL
7.	4N-7530	[4]	SHOE
8.	6H-8346	[2]	NUT
	3B-4506	[2]	LOCKWASHER
9.	6N-3763	[1]	COVER
10.	4N-7476	[1]	CONNECTOR
11.	4N-7477	[1]	PLATE ASSEM. (brush)
12.	4N-7474	[1]	GASKET
13.	4N-6940	[1]	ARMATURE AND DRIVE ASSEM.
			(Includes)
	4N-6942	[1]	ARMATURE ASSEM.
14.	6M-5062	[1]	SEAL
15.	7M-9909	[1]	SEAL
16.	4N-7525	[1]	WASHER
17.	4N-7527	[1]	SEAL
18.	4N-7524	[1]	WASHER
19.	4N-6941	[1]	LEVER ASSEM.
20.	4N-7523	[1]	CLUTCH ASSEM.
21.	4N-7522	[1]	COLLAR
22.	4N-7521	[1]	RING
			THE FOLLOWING REPAIR KITS ARE AVAILABLE:
	4N-7548	[1]	KIT (Armature Thrust Washer)
			(Includes: 2 Washers)
	4N-7549	[1]	KIT (Insulator)
			(Includes: 4 Bushings)
	4N-7550	[1]	KIT (Terminal Stud)
			(Includes: Stud, Washer, Seal, Bushing)
	4N-7551	[1]	KIT (Core Contact)
			(Includes: Spring, Insulator, Stud, Contact, Strap, Nut)
	4N-7552	[1]	KIT (Bearing)
			(Includes: 3 Bearings)
	4N-7553	[1]	KIT (Field Coil)
			(Includes: Coil, Bolt, Screw, Washer, Bushing, Seal)
	4N-7554	[1]	KIT (Brush)
			(Includes: Brush, Plate, Seal, Gasket, Screw Assem.)
	4N-7555	[1]	KIT (Seal)
			(Includes: Seals, Boot, Gasket)
	4N-7565	[1]	KIT (Hardware)
			(Includes: Bolts, Screw, Nuts, Washers, Lockwashers)
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#SEBP12550181

4N-0241: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

4N0241 STARTING MOTOR GP-ELECTRIC-12 VOLT-TYPE 2.
8N0410-PAGE 43 & 9G5517-PAGE 43B
PART OF 4N0190 STARTING MOTOR-ELECTRIC

c590204 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0410 Y	[1]	SWITCH GP (MAGNETIC)
2.	4N-7473	[1]	HOUSING AS
3.	4N-7472	[1]	COVER-STARTER
4.	4N-7475	[1]	SEAL
5.	9G-5517 CY	[1]	SWITCH AS
6.	2J-8163	[1]	SEAL-O-RING
7.	4N-7530	[4]	SHOE-POLE
8.	6H-8346	[2]	NUT-MACHINE SCREW
	3B-4506	[2]	LOCKWASHER
9.	9G-5390 C	[1]	COVER-INSULATING
10.	4N-7476	[1]	CONNECTOR
11.	4N-7477	[1]	PLATE AS-BRUSH
12.	4N-7474	[1]	GASKET
13.	4N-6940	[1]	ARMATURE & DRIVE AS
	4N-6942	[1]	ARMATURE AS
14.	6M-5062	[1]	SEAL-O-RING
15.	7M-9909	[1]	SEAL-O-RING
16.	4N-7525	[1]	WASHER
17.	4N-7527	[1]	SEAL-OIL
18.	4N-7524	[1]	WASHER
19.	4N-6941	[1]	LEVER AS-DRIVE
20.	4N-7523	[1]	CLUTCH AS
21.	4N-7522	[1]	COLLAR-PINION
22.	4N-7521	[1]	RING-LOCK
23.	9G-5389 C	[1]	COVER

24.	3T-5962 C	[1]	PLATE-IDENTIFICATION
	2H-3880	[2]	SCREW-DRIVE
			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE:
	4N-7548	[1]	KIT-THRUST WASHER (ARMATURE)
	4N-7549	[1]	KIT-INSULATOR
	4N-7550	[1]	KIT-TERMINAL STUD
			(INCL STUD, WASHER,
			SEAL AND BUSHING)
	4N-7551	[1]	KIT-CORE CONTACT (INCL SPRING,
			INSULATOR, STUD,
			CONTACT, STRAP, NUT)
	4N-7552	[1]	KIT-BEARING
	4N-7553	[1]	KIT-FIELD COIL
			(INCL COIL, BOLT,
			SCREW, WASHER, SEAL)
	4N-7554	[1]	KIT-BRUSH (INCL BRUSH,
			PLATE, SEAL, GASKET,
			AND SCREW AS)
	4N-7555	[1]	KIT-SEAL (INCL SEALS, BOOT,
			AND GASKET)
	4N-7565	[1]	KIT-HARDWARE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP12550182

8N-0410: SWITCH GP

SWITCH GP

8N410 MAGNETIC SWITCH GROUP-TYPE 1.PART OF 4N241 STARTING MOTOR
GROUP SHOWN ON PAGE 42

c223554 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0412	[1]	BOOT
2.	4N-7531	[1]	LEAD ASSEM.
3.	4N-7470	[1]	WIRE ASSEM.
4.	8N-0411	[1]	WIRE ASSEM.

#SEBP12550183

4N-6938: SWITCH AS

SWITCH AS

4N6938 SOLENOID SWITCH ASSEMBLY
PART OF 4N241 STARTING MOTOR GROUP-PAGE 42

c570965 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-4105	[1]	CORE AS
2.	4N-7528	[1]	BOOT
3.	6N-4727	[1]	COVER AS
4.	4N-7547	[1]	GASKET

			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	4N-7551	[1]	KIT-CORE CONTACT (INCLUDES STUDS, NUTS
			LOCKWASHERS, WASHERS,
			SEALS, SPRING, CONTACT)

#SEBP12550184

8N-0410: SWITCH GP

SWITCH GP

8N410 MAGNETIC SWITCH GROUP-TYPE 2.PART OF 4N241 STARTING MOTOR
GROUP SHOWN ON PAGES 42 & 42A

c234381 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0412	[1]	BOOT
2.	3T-2216 C	[1]	WIRE AS
	5P-5622 D		WIRE (.4M)
	9F-3965	[1]	TERMINAL (6.35MM SCREW)
3.	5M-8412	[1]	CLIP-TERMINAL
4.	3T-2217 C	[1]	WIRE AS
	5P-5622 D		WIRE (.2M)
	2L-8067	[1]	TERMINAL (6.35MM SCREW)
	2L-8069	[1]	TERMINAL (9.52MM SCREW)
5.	3T-2218 C	[1]	WIRE AS
	5P-5624 D		WIRE (.13M)
	2L-8066	[1]	TERMINAL (4.83MM SCREW)
6.	5P-5610	[1]	CONNECTOR
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER

#SEBP12550185

9G-5517: SWITCH AS

SWITCH AS

9G5517 SWITCH ASSEMBLY-12 VOLT.PART OF 4N241 ELECTRIC STARTING
MOTOR GROUP SHOWN ON PAGE 42A

c230500 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-4105	[1]	CORE AS
2.	4N-7528	[1]	BOOT
3.	9G-5387	[1]	COVER AS
4.	9G-5388	[1]	GASKET

#SEBP12550186

5G-1550: STARTING AID GP-ETHER

STARTING AID GP-ETHER

5G1550 ETHER STARTING AID GROUP.SERIAL NO. 41Y1 TO 41Y886 INCLUSIVE
ALSO AVAILABLE AS AN ATTACHMENT

c485571 SEBP1255

5G1550 STARTING AID GP-ETHER Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7673	[1]	VALVE AS-START
	7N-9801	[1]	GASKET
2.	6K-1827	[2]	CONNECTOR-BULLET
3.	5P-6315	[1]	ELBOW-FLARELESS
	5P-6313	[1]	NUT-FLARELESS
	5P-6314	[1]	SLEEVE-FLARELESS
4.	2H-3755	[4]	BOLT
	4B-4277	[4]	WASHER
5.	5G-1578	[1]	BRACKET
6.	1D-4717	[2]	NUT
	5P-1075	[2]	WASHER-HARD (CONICAL)
	9H-7084	[2]	WASHER (PLAIN)
7.	5G-1581	[1]	TUBE
8.	3L-2875	[1]	CLIP
9.	3D-5102	[2]	GROMMET
10.	5P-6022 BD		WIRE (14 GA)
11.	6N-9587	[1]	CONNECTOR
12.	2L-8075	[1]	TERMINAL
13.	6N-5899	[1]	SWITCH (TEMPERATURE
			ETHER AID ARMING)
14.	7N-0140	[1]	TUBE AS-COIL
15.	5G-0660	[1]	TUBE
16.	8M-2772	[1]	CLIP
17.	6N-7672	[1]	ATOMIZER AS
18.	7N-2059	[1]	CLAMP AS-CYLINDER
19.	3T-0306 C	[1]	SWITCH-STARTING AID
20.	5G-2542 C	[1]	WIRE AS
21.	2V-1713	[1]	TAG (INSTRUCTION)

	7N-0296 A	[1]	CYLINDER AS (ETHER)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER

#SEBP12550187

6S-3548: BATTERY GP

BATTERY GP

6S3548 BATTERY GROUP-HEAVY DUTY. AN ATTACHMENT

c498642 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9G-4231	[1]	BATTERY-12V
2.	7N-0060	[6]	VENT AS
3.	6S-4126	[1]	FRAME AS

#SEBP12550188

5G-2203: WIRING & LIGHTING GP

WIRING & LIGHTING GP

5G2203 BATTERY,WIRING AND LIGHTING GROUP-12 VOLT-PART 1 OF 3-TYPE 1
FOR GERMAN MARKET ONLY. AN ATTACHMENT

c301375 SEBP1255

5G2203 WIRING & LIGHTING GP Parts scheme

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4330	[4]	NUT
	5P-4115	[4]	WASHER (conical)
2.	4K-6697	[1]	HOLD DOWN ASSEM.
3.	5G-1363	[1]	CABLE ASSEM.
			(Includes)
	5P-0746 H		CABLE 42 cm(16.5 in.)
4.	5M-9205	[1]	TERMINAL ASSEM.
			(Includes)
	1M-6119	[1]	BOLT
	1M-6120	[1]	NUT
5.	030-1707	[1]	TERMINAL
6.	0S-0509	[3]	BOLT
7.	4B-4278	[2]	WASHER
8.	8M-2770	[2]	CLIP
9.	0T-0102	[4]	BOLT
10.	5P-1075	[5]	WASHER
11.	5G-1129	[1]	WIRE ASSEM.
			(Includes)
	5P-5622 L		WIRE 1.2m (47.2 in.)
	6B-2864	[1]	TERMINAL
12.	009-8708	[1]	BOOT
13.	5A-4252	[1]	CAP
14.	6N-2466	[1]	SWITCH ASSEM. (oil pressure)
15.	4D-8123	[1]	CLIP
16.	6S-4302	[1]	CABLE ASSEM.
			(Includes)
	5P-0746 H		CABLE 28.5 cm(11.25 in.)
17.		[2]	TERMINAL
18.	5P-8444	[1]	GROMMET
19.	1S-0994	[1]	CLIP
20.	8M-2773	[1]	CLIP
21.	5G-1365	[1]	CABLE ASSEM.
			(Includes)
	5P-0746 H		CABLE 120 cm(47.2 in.)
	030-1707	[1]	TERMINAL
22.	3D-2098	[1]	TERMINAL ASSEM.
			(Includes)
	1M-6119	[1]	BOLT
	1M-6120	[1]	NUT
23.	8N-1725	[1]	COVER
24.	6K-4355	[4]	ROD
	3B-4607	[4]	COTTER
25.	4S-9261	[1]	BATTERY
			(Includes)
	7G-9383	[6]	VENT ASSEM.
	H		ORDER BY THE CENTIMETER
	L		ORDER BY THE METER

#SEBP12550189

5G-2203: WIRING & LIGHTING GP

WIRING & LIGHTING GP

5G2203 BATTERY,WIRING AND LIGHTING GROUP-12 VOLT-PART 2 OF 3-TYPE 1
FOR GERMAN MARKET ONLY.5G1565 AND 5G1568 HARNESS PARTS ARE SHOWN
ON PAGES 52 AND 53. AN ATTACHMENT

c301376 SEBP1255

For full view, you need register

Parts for your 910 COMPACT WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5G-1798 J	[1]	WIRE ASSEM.
			(Includes)
	5P-5624		WIRE .100 m(3.93 in.)
	2L-8075 L	[1]	TERMINAL
2.	6K-0613	[1]	TERMINAL
3.	1P-4194	[1]	BOOT
4.	5G-1799 J	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 L		WIRE .100 m(3.93 in.)
	2L-8075	[1]	TERMINAL
5.	5P-6271	[1]	TERMINAL
6.	1S-6329	[17]	STRAP
7.	5K-8451	[1]	CLIP
8.	0T-0102	[8]	BOLT
9.	5P-1075	[17]	WASHER
10.	8M-2773	[5]	CLIP
11.	1H-5166	[3]	CLIP
12.	5G-1565 Y	[1]	HARNESS ASSEM.
			(Separate Illustration)
13.	0S-0509	[9]	BOLT
14.	3V-7797	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 L		WIRE .450 m(17.7 in.)
	2L-8079	[1]	TERMINAL
	5P-5610	[1]	CONNECTOR
15.	5G-1536	[1]	HARNESS ASSEM.
			(Includes)
	5P-5624 L		WIRE (14 gauge)
16.	5P-5610	[1]	TERMINAL
17.	2L-8075	[2]	TERMINAL
18.	5P-6271	[4]	CONNECTOR
19.	7P-0792	[1]	CONNECTOR ASSEM.
20.	6S-1066 C	[4]	GROMMET
21.	8M-2770	[9]	CLIP
22.	6S-8956	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 L		WIRE .225 m(8.8 in.)
23.	2L-8075	[1]	TERMINAL
24.	2S-5012	[1]	CAP
	2S-5014	[1]	CONTACT
25.	3K-8781	[1]	FUSE (7.5 amp)
26.	1S-1015	[1]	CLIP
27.	5G-1568 Y	[1]	HARNESS ASSEM.
			(Separate Illustration)
	J		USE AS REQUIRED
	L		ORDER BY THE METER
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION