COOLING SYSTEM
PUMP GP-WATERLINES GP-VENT
LINES GP-WATER
COOLING SYSTEM
PUMP GP-WATER
#SEBP12570160
170-0569: KIT-WATER PUMP
170-0569 KIT-WATER PUMP
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1B-3867 | [1] | BALL BEARING | ||
| 6H-3957 | [1] | BALL BEARING | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 6K-3771 | [1] | BOLT-12 POINT HEAD (7/16-14X1.5-IN) | ||
| 4N-5834 | [1] | FILTER-FOAM (WATER PUMP HOUSING) | ||
| 172-0038 | [1] | GASKET | ||
| 1K-6985 | [1] | RING-RETAINING | ||
| 169-1750 | [1] | SEAL GP | ||
| 154-4482 | [1] | SEAL-LIP TYPE | ||
| 172-5185 | [1] | SHAFT-WATER PUMP | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP12570161
7C-8085: LINES GP-VENT
7C-8085 LINES GP-VENT
S/N 37Y1252-UP
CANNOT BE USED WITH RADIATOR OR EXPANSION TANK
AN ATTACHMENT
S/N 37Y1252-UP
CANNOT BE USED WITH RADIATOR OR EXPANSION TANK
AN ATTACHMENT
For full view, you need register
#SEBP12570162
7E-1568: LINES GP-VENT
7E-1568 LINES GP-VENT
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
#SEBP12570163
1W-7910: LINES GP-WATER
1W-7910 LINES GP-WATER -VENT
FOR USE WITH WATERCOOLED EXHAUST MANIFOLD AND RADIATOR
AN ATTACHMENT
FOR USE WITH WATERCOOLED EXHAUST MANIFOLD AND RADIATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570164
2P-7728: LINES GP-WATER
2P-7728 LINES GP-WATER
S/N 37Y652-1018
S/N 37Y652-1018
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-0551 | [1] | PLUG-PIPE | |
| 2. | 6N-0123 C | [1] | BONNET-OIL COOLER | |
| 3. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 4. | 5F-4899 C | [1] | BOLT (3/8-16X5.5-IN) | |
| 5. | 2W-4561 C | [1] | GASKET | |
| 6. | 0S-1591 C | [1] | BOLT (3/8-16X1.5-IN) | |
| 7. | 1B-5174 | [1] | PLUG-PIPE | |
| 8. | 4N-3840 C | [1] | COVER | |
| 9. | 0S-1617 C | [2] | BOLT (5/16-18X0.75-IN) | |
| 9M-1974 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 10. | 4N-3841 C | [1] | GASKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP12570165
2W-6779: LINES GP-WATER
2W-6779 LINES GP-WATER -BYPASS RELIEF
S/N 37Y1252-UP
S/N 37Y1252-UP
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570166
4W-4569: LINES GP-WATER
4W-4569 LINES GP-WATER
S/N 37Y1019-1251
S/N 37Y1019-1251
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 2. | 2P-6132 | [1] | GASKET-ELBOW | |
| 3. | 8T-4984 | [2] | CLAMP-HOSE | |
| 4. | 7N-0200 | [1] | GASKET | |
| 5. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 6. | 131-6645 | [1] | HOSE | |
| 7. | 8N-4151 | [1] | LINES GP-WATER | |
| 7N-6918 | [1] | ELBOW | ||
| 8. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 9. | 5M-6213 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 10. | 1B-5174 | [3] | PLUG-PIPE | |
| 11. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 12. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 13. | 5L-6573 | [1] | LUG |
#SEBP12570167
8N-0713: LINES GP-WATER
8N-0713 LINES GP-WATER
S/N 37Y373-1018
S/N 37Y373-1018
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 0S-1590 | [1] | BOLT (3/8-16X2-IN) | ||
| 2. | 8N-4151 | [1] | LINES GP-WATER | |
| 7N-6918 | [1] | ELBOW | ||
| 3. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 4. | 1B-5174 | [3] | PLUG-PIPE | |
| 5. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 6. | 2P-6132 | [1] | GASKET-ELBOW | |
| 7. | 5P-1260 E | HOSE (7.62CM) | ||
| 8. | 2P-8870 | [1] | PIPE-PUMP OUTLET | |
| 9. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 10. | 5P-4868 | [2] | CLAMP-HOSE | |
| 11. | 7N-0200 | [1] | GASKET | |
| 12. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 13. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5L-6573 | [1] | LUG | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP12570168
8N-4112: LINES GP-WATER
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570169
8N-8260: LINES GP-WATER
For full view, you need register
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-7296 | [1] | ELBOW-FLARED | |
| 2. | 6N-0123 | [1] | BONNET-OIL COOLER | |
| 3. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 4. | 5F-4899 | [1] | BOLT (3/8-16X5.5-IN) | |
| 5. | 2P-2516 | [1] | GASKET | |
| 6. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 7. | 1B-5174 | [1] | PLUG-PIPE | |
| 8. | 4N-3840 | [1] | COVER | |
| 9. | 0S-1617 | [2] | BOLT (5/16-18X0.75-IN) | |
| 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 10. | 4N-3841 | [1] | GASKET |
Information:
COOLING SYSTEM
PUMP GP-WATER
Engine News
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01
1978/03/01
Operation and Maintenance Manual
Special Instruction
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Technical Information Bulletin
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Specifications
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Information Release Memo
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Disassembly and Assembly
Service Magazine
