COOLING SYSTEM
PUMP GP-WATERRADIATOR GP
COOLING SYSTEM
PUMP GP-WATER#SEBP12570190
8N-1913: PUMP GP-WATER
8N-1913 PUMP GP-WATER
S/N 37Y1-372
FOR USE WITH 8N-1912 LINES GP-WATER, 7N-6106 CONVERSION AR-ENGINE, SEPARATE CIRCUIT COOLING LINES
AN ATTACHMENT
S/N 37Y1-372
FOR USE WITH 8N-1912 LINES GP-WATER, 7N-6106 CONVERSION AR-ENGINE, SEPARATE CIRCUIT COOLING LINES
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 6N-8190 | [1] | GASKET | |
| 3. | 4N-6556 | [1] | SEAL AS-PUMP | |
| 4. | 8S-7762 | [1] | RING-SEAL | |
| 5. | 8S-8821 | [1] | SEAL-IMPELLER | |
| 6. | 8H-9520 | [1] | SEAL-LIP TYPE | |
| 7. | 1K-6985 J | [1] | RING-RETAINING | |
| 8. | 5P-0076 J | [1] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 3B-4506 J | [1] | LOCKWASHER | ||
| 9. | 6H-3957 J | [1] | BALL BEARING | |
| 10. | 8N-1350 C | [1] | GEAR AS-PUMP (40 TEETH) | |
| 11. | 1B-3867 | [1] | BALL BEARING | |
| 12. | 5F-3106 | [1] | SEAL-O-RING | |
| 13. | 5M-6213 J | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 6N-8412 | [1] | HOUSING-PUMP | |
| 15. | 8S-9191 | [2] | BOLT (3/8-16X4-IN) | |
| 16. | 8N-5929 C | [1] | COVER-WATER PUMP | |
| 17. | 6N-8411 J | [1] | IMPELLER-PUMP | |
| 18. | 4L-6454 J | [1] | BOLT (3/8-16X1-IN) | |
| 9M-6527 J | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | ||
| 19. | 1P-9929 J | [1] | SHAFT-WATER PUMP | |
| 20. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 1W-7054 C | [1] | KIT-WATER PUMP (PUMP) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT(S) MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP12570191
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 37Y373-UP
Type 1
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 37Y373-UP
Type 1
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 8N-5928 | [1] | GASKET | |
| 3. | 6N-9312 | [1] | SEAL GP-PUMP | |
| 4. | 1B-3867 J | [1] | BALL BEARING | |
| 5. | 5M-2894 J | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 8H-9520 | [1] | SEAL-LIP TYPE | |
| 7. | 1K-6985 J | [1] | RING-RETAINING | |
| 8. | 5P-0076 J | [1] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 9. | 6H-3957 J | [1] | BALL BEARING | |
| 10. | 8N-2626 | [1] | GEAR AS (40 TEETH) | |
| 11. | 2L-5893 | [2] | PIN-SPRING | |
| 12. | 5F-3106 | [1] | SEAL-O-RING | |
| 13. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 7N-6366 | [1] | HOUSING-PUMP | |
| 15. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 16. | 8N-5929 | [1] | COVER-WATER PUMP | |
| 17. | 7N-5910 | [1] | IMPELLER-PUMP | |
| 18. | 4L-6454 J | [1] | BOLT (3/8-16X1-IN) | |
| 9M-6527 J | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | ||
| 19. | 7N-5899 J | [1] | SHAFT-WATER PUMP | |
| 20. | 3B-4506 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 1W-7055 J | [1] | KIT-PUMP REBUILD | ||
| J | KIT(S) MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP12570192
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 37Y373-UP
Type 2
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 37Y373-UP
Type 2
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570193
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 37Y373-UP
Type 3
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 37Y373-UP
Type 3
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570194
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 37Y373-UP
Type 4
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 37Y373-UP
Type 4
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570195
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 37Y373-UP
Type 5
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 37Y373-UP
Type 5
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570196
8N-4252: PUMP GP-WATER
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570197
8N-5997: RADIATOR GP
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-0509 | [8] | BOLT (3/8-16X0.75-IN) | |
| 2. | 8N-5474 | [1] | HOSE-RADIATOR | |
| 3. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN)(3.81CM LONG) | |
| 7N-2597 | [1] | SPACER (13.5X25.4X8.08-MM THK) | ||
| 4. | 3N-6033 | [1] | HOSE-PUMP INLET | |
| 5. | 9M-5733 | [16] | RIVET-POP | |
| 6. | 2A-4639 | [4] | BOLT (3/8-16X1.625-IN) | |
| 7. | 2L-4238 | [4] | MOUNT-FLEXIBLE | |
| 8. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 9. | 3F-1417 | [14] | WASHER (10.3X30.2X3-MM THK) | |
| 10. | 8L-4533 | [1] | GUARD-RADIATOR | |
| 11. | 8L-4492 | [1] | SHELL AS-RADIATOR | |
| 12. | 9F-2978 | [6] | NUT-WELD (3/8-16-THD) | |
| 13. | 3L-1585 | [1] | GASKET | |
| 14. | 4F-8965 | [2] | BOLT (7/16-14X1.125-IN) | |
| 15. | 4L-2138 | [1] | ELBOW-RADIATOR OUTLET | |
| 16. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 17. | 0T-0102 | [2] | BOLT (3/8-16X0.625-IN) | |
| 18. | 9M-7959 | [6] | CLAMP-HOSE | |
| 19. | 1B-5174 | [1] | PLUG-PIPE | |
| 20. | 4L-2921 | [1] | SUPPORT AS | |
| 4L-2922 | [1] | SUPPORT AS | ||
| 21. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| 22. | 6L-4855 | [1] | HOSE | |
| 23. | 3N-2669 | [1] | ELBOW | |
| 24. | 2M-0849 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 25. | 7N-7077 Y | [1] | GUARD GP-FAN | |
| 26. | 4L-2114 | [1] | RADIATOR GP | |
| 27. | 3L-2866 | [1] | CAP-RADIATOR | |
| 28. | 6N-7870 | [1] | BRACE | |
| 29. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN)(3.18CM LONG) | |
| 30. | 0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | |
| (USED WITHOUT HOOD & DASH OR HOOD DOORS & BASE GROUP) | ||||
| 31. | 5M-2894 | [14] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12570198
8N-5997: RADIATOR GP
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-0509 | [8] | BOLT (3/8-16X0.75-IN) | |
| 2. | 8N-5474 | [1] | HOSE-RADIATOR | |
| 3. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN)(3.81CM LONG) | |
| 7N-2597 | [1] | SPACER (13.5X25.4X8.08-MM THK) | ||
| 4. | 3N-6033 | [1] | HOSE-PUMP INLET | |
| 5. | 9M-5733 | [16] | RIVET-POP | |
| 6. | 2A-4639 | [4] | BOLT (3/8-16X1.625-IN) | |
| 7. | 2L-4238 | [4] | MOUNT-FLEXIBLE | |
| 8. | 0S-1594 C | [8] | BOLT (3/8-16X1-IN) | |
| 9. | 3F-1417 | [14] | WASHER (10.3X30.2X3-MM THK) | |
| 10. | 8L-4533 | [1] | GUARD-RADIATOR | |
| 11. | 8L-4492 | [1] | SHELL AS-RADIATOR | |
| 12. | 9F-2978 | [6] | NUT-WELD (3/8-16-THD) | |
| 13. | 3L-1585 | [1] | GASKET | |
| 14. | 4F-8965 | [2] | BOLT (7/16-14X1.125-IN) | |
| 15. | 4L-2138 | [1] | ELBOW-RADIATOR OUTLET | |
| 16. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 17. | 0T-0102 | [2] | BOLT (3/8-16X0.625-IN) | |
| 18. | 9M-7959 | [6] | CLAMP-HOSE | |
| 19. | 1B-5174 | [1] | PLUG-PIPE | |
| 20. | 4L-2921 | [1] | SUPPORT AS | |
| 4L-2922 | [1] | SUPPORT AS | ||
| 21. | 4L-7893 | [4] | SHIM (0.598-IN THK) | |
| 22. | 6L-4855 | [1] | HOSE | |
| 23. | 3N-2669 | [1] | ELBOW | |
| 24. | 6N-7870 | [1] | BRACE | |
| 25. | 8N-3272 C | [1] | PLATE-LIFTING EYE | |
| 26. | 4L-2114 | [1] | RADIATOR GP | |
| 27. | 3L-2866 | [1] | CAP-RADIATOR (RADIATOR) | |
| 28. | 3J-5390 C | [1] | PLUG (3/8-18-THD) | |
| 29. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN)(3.18CM LONG) | |
| 30. | 0L-1351 J | [8] | BOLT (3/8-16X0.875-IN) | |
| 31. | 5M-2894 C | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 32. | 4B-3823 C | [4] | BOLT (1/2-13X1.25-IN) | |
| 33. | 5P-8245 C | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8N-1633 C | [1] | GUARD AS-FAN | |
| 35. | 8N-1632 C | [1] | GUARD AS-FAN | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | NOT REQUIRED WHEN USED WITH HOOD & DASH/HOOD DOORS & BASE GP | |||
#SEBP12570199
8N-5997: RADIATOR GP
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5M-3062 | [8] | BOLT (3/8-16X0.75-IN) | |
| 2. | 8N-5474 | [1] | HOSE-RADIATOR | |
| 3. | 5P-2566 | [1] | BOLT (1/2-13X1.5-IN) | |
| 4. | 3N-6033 | [1] | HOSE-PUMP INLET | |
| 5. | 9M-5733 | [16] | RIVET-POP | |
| 6. | 7X-0288 | [4] | BOLT (3/8-16X1.625-IN) | |
| 7. | 2L-4238 | [4] | MOUNT-FLEXIBLE | |
| 8. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 9. | 3F-1417 | [14] | WASHER (10.3X30.2X3-MM THK) | |
| 10. | 8L-4533 | [1] | GUARD-RADIATOR | |
| 11. | 8L-4492 | [1] | SHELL AS-RADIATOR | |
| 11A. | 9F-2978 | [6] | NUT-WELD (3/8-16-THD) | |
| 12. | 7X-7737 | [1] | SPACER (13.5X25.4X8.08-MM THK) | |
| 13. | 3L-1585 | [1] | GASKET | |
| 14. | 8T-9382 | [2] | BOLT (7/16-14X1.25-IN) | |
| 15. | 4L-2138 | [1] | ELBOW-RADIATOR OUTLET | |
| 16. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 17. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 18. | 9M-7959 | [6] | CLAMP-HOSE | |
| 19. | 7X-7731 | [1] | PLUG-PIPE (3/4-14-THD) | |
| 20. | 337-6913 | [1] | SUPPORT AS (RH) | |
| 21. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| 22. | 5P-1262 | [1] | HOSE | |
| 23. | 3N-2669 | [1] | ELBOW | |
| 24. | 107-9345 | [1] | BRACE | |
| 25. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 2W-3891 C | [1] | GUARD AS-FAN (LOWER) | |
| 28. | 2W-3889 C | [1] | GUARD AS-FAN (UPPER) | |
| 29. | 8T-8917 | [1] | BOLT (1/2-13X1.25-IN) | |
| 30. | 5S-7379 B | [8] | BOLT (3/8-16X0.875-IN) | |
| 31. | 4L-2114 | [1] | RADIATOR GP | |
| 32. | 6L-8617 | [1] | CAP-PRESSURE (7-PSI)(RADIATOR) | |
| 33. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
| 34. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 35. | 5S-7349 | [8] | BOLT (1/4-20X0.5-IN) | |
| 36. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 37. | 337-6912 | [1] | SUPPORT AS (LH) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
COOLING SYSTEM
PUMP GP-WATER
Engine News
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01
1978/03/01
Operation and Maintenance Manual
Special Instruction
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Technical Information Bulletin
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Specifications
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Information Release Memo
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
PRODUCT LINE ADDITION: REMANUFACTURED SEA WATER PUMPS
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Disassembly and Assembly
Service Magazine