ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP12570370
4N-5712: STARTING MOTOR GP-AIR
4N-5712 STARTING MOTOR GP-AIR
Type 2
CANNOT BE USED WITH HOOD AND DASH
AN ATTACHMENT
Type 2
CANNOT BE USED WITH HOOD AND DASH
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4D-3967 | [1] | BUSHING-REDUCER | |
2. | 3B-7264 | [1] | FITTING (1.91CM LONG) | |
3. | 4N-3410 | [1] | VALVE AS-CONTROL (STARTING) | |
4. | 1H-0690 | [1] | STRIP-FELT | |
5. | 9M-2904 | [1] | CLAMP-HOSE | |
6. | 7B-7908 | [1] | NIPPLE-PIPE (11.43CM LONG) | |
7. | 4N-5666 I | [1] | HOSE AS | |
8. | 4N-5667 | [1] | HOSE AS | |
9. | 3D-8884 | [3] | ELBOW | |
10. | 7M-9544 | [1] | VALVE (AIR STARTING MOTOR)(RELAY) | |
11. | 3B-7749 C | [2] | NIPPLE-PIPE (3.81CM LONG) | |
12. | 4L-3124 | [1] | LUBRICATOR GP-AIR MOTOR | |
13. | 8S-2332 C | [1] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
14. | 3L-9071 | [1] | ELBOW-REDUCING | |
5L-3785 | [1] | NIPPLE-PIPE (5.08CM LONG) | ||
15. | 4N-4370 Y | [1] | STARTING MOTOR GP-AIR | |
16. | 7J-8902 | [2] | BOLT-12 POINT HEAD (5/8-11X1.5-IN) | |
2S-5658 C | [2] | WASHER-HARD (17X29X3-MM THK) | ||
17. | 4H-7869 | [1] | GASKET | |
18. | 2W-1786 C | [1] | BRACKET AS | |
1K-3047 | [1] | WASHER (17.5X28.6X3-MM THK) | ||
19. | 4B-7770 | [1] | TEE | |
20. | 9L-4652 I | [1] | HOSE AS | |
C | CHANGE FROM PREVIOUS TYPE | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Y | SEPARATE ILLUSTRATION |
#SEBP12570371
7W-9654: STARTING MOTOR GP-AIR
Parts for your G3304 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9L-4652 I | [1] | HOSE AS | |
2. | 4B-7770 | [1] | TEE | |
3. | 4D-3967 | [1] | BUSHING-REDUCER | |
4. | 6V-1813 | [1] | FITTING | |
5. | 4N-3410 | [1] | VALVE AS-CONTROL (STARTING) | |
6. | 2W-0629 | [1] | KNOB-ENGINE START | |
7. | 9M-2904 | [1] | CLAMP-HOSE | |
8. | 1H-0690 | [1] | STRIP-FELT | |
9. | 6N-2430 | [1] | NIPPLE-PIPE | |
10. | 3N-4579 I | [2] | HOSE AS | |
11. | 4M-5317 | [1] | BUSHING-REDUCER | |
12. | 3D-8884 | [1] | ELBOW | |
13. | 7M-9544 | [1] | VALVE (AIR STARTING MOTOR) | |
14. | 3B-7749 | [2] | NIPPLE-PIPE | |
15. | 4L-3124 | [1] | LUBRICATOR GP-AIR MOTOR | |
16. | 3L-9071 | [1] | ELBOW-REDUCING | |
17. | 3B-7750 | [1] | FITTING | |
18. | 8S-2332 | [1] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
19. | 7W-9655 Y | [1] | STARTING MOTOR GP-AIR | |
20. | 5J-7303 | [2] | ELBOW | |
21. | 7J-8902 | [2] | BOLT-12 POINT HEAD (5/8-11X1.5-IN) | |
22. | 2W-1816 | [1] | BRACKET AS | |
1K-3047 | [1] | WASHER (17.5X28.6X3-MM THK) | ||
23. | 2S-5658 | [2] | WASHER-HARD (17X29X3-MM THK) | |
24. | 4H-7869 | [1] | GASKET | |
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Y | SEPARATE ILLUSTRATION |
#SEBP12570372
7W-9655: STARTING MOTOR GP-AIR
7W-9655 STARTING MOTOR GP-AIR
PART OF 7W-9654 STARTING MOTOR GP-AIR
AN ATTACHMENT
PART OF 7W-9654 STARTING MOTOR GP-AIR
AN ATTACHMENT
Parts for your G3304 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-0510 | [1] | COVER AS | |
2. | 7W-0517 | [1] | COVER-ROTOR NUT | |
3. | 7W-0516 | [1] | NUT-ROTOR CLAMP | |
4. | 8T-2182 | [1] | BALL BEARING | |
5. | 6V-5193 M | [4] | BOLT-SOCKET HEAD (M8X1.25X40-MM) | |
6. | 7W-0511 | [1] | PLATE-REAR END | |
7. | 7W-0512 | [1] | HOUSING AS-CYLINDER | |
8. | 7W-0513 | [1] | PLATE-FRONT END | |
9. | 7W-0521 | [1] | GEAR AS (27-TEETH) | |
10. | 7W-0520 | [1] | CASE-GEAR | |
11. | 8T-0271 M | [1] | BOLT-SOCKET HEAD (M10X1.5X35-MM) | |
12. | 7W-0534 | [1] | WASHER (10.3X22.2X4-MM THK) | |
13. | 8T-2224 M | [4] | BOLT-SOCKET HEAD (M8X1.25X85-MM) | |
14. | 8T-0727 | [2] | BALL BEARING | |
15. | 7W-0533 | [1] | SPACER (10.3X16X15-MM THK) | |
16. | 8T-0726 | [1] | BEARING-ROLLER | |
17. | 7W-0530 | [1] | SPRING-RETURN | |
18. | 7W-0529 | [1] | CUP-SPRING | |
19. | 7W-0514 | [1] | ROTOR | |
20. | 124-4433 | [1] | PINION-DRIVE (12-TEETH) | |
21. | 293-7466 | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
22. | 7W-0532 | [1] | SHAFT-DRIVE | |
23. | 060-7519 | [1] | BALL BEARING | |
24. | 7W-0531 | [1] | SEAT-SPRING | |
25. | 7W-0528 | [1] | SPRING-CLUTCH | |
26. | 8T-2191 | [1] | RING-RETAINING | |
27. | 8T-0728 | [1] | BALL BEARING | |
28. | 2L-6965 | [2] | RING-RETAINING | |
29. | 8T-2190 | [2] | RING-RETAINING | |
30. | 7W-0519 | [1] | PINION-ROTOR (9-TEETH) | |
31. | 1S-7056 | [1] | BALL BEARING | |
32. | 7W-0518 | [2] | WASHER-WAVE | |
33. | 8T-1160 M | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | |
AVAILABLE REPAIR KIT(S): | ||||
7W-0523 | [1] | KIT-PISTON (AIR STARTING MOTOR) | ||
(INCLUDES O-RING) | ||||
7W-0525 | [1] | KIT-JAW CLUTCH (AIR STARTING MOTOR) | ||
(INCLUDES SPLINES & BEARING) | ||||
7W-0538 | [1] | KIT-DRIVE (AIR STARTING MOTOR) | ||
(INCLUDES GASKET, O-RING, HOUSING, SEAL, BEARING, BOLTS & WASHERS) | ||||
7W-0540 | [1] | KIT-SEAL & VANE (AIR STARTING MOTOR) | ||
(INCLUDES O-RINGS, VANES, GASKET, SEALS & WASHERS) | ||||
M | METRIC PART |
#SEBP12570373
106-8552: STARTING MOTOR GP-ELECTRIC
106-8552 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 6V-5227 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5227@@@@@
24-VOLT
PART OF 6V-5227 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@ 6V-5227@@@@@
#SEBP12570374
117-3031: STARTING MOTOR GP-ELECTRIC
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570375
117-3031: STARTING MOTOR GP-ELECTRIC
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570376
117-3032: STARTING MOTOR GP-ELECTRIC
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570377
117-3032: STARTING MOTOR GP-ELECTRIC
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570378
1W-5516: STARTING MOTOR GP-ELECTRIC
Parts for your G3304 GAS ENGINE:
CATERPILLAR SIS#SEBP12570379
1W-5516: STARTING MOTOR GP-ELECTRIC
Parts for your G3304 GAS ENGINE:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
Operation and Maintenance Manual
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Service Magazine