AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

943 LGP TRACK LOADER / HIGH DRIVE / 04Z00001-00306 (MACHINE) POWERED BY 3304 ENGINE UNDERCARRIAGE Caterpillar SIS



TRACK LOADER 943 TRACK LOADER 04Z
 943 LGP TRACK LOADER / HIGH DRIVE / 04Z00001-00306 (MACHINE) POWERED BY 3304 ENGINE SEBP1262 943 04Z   (1980)

Parts group 943:

  For full view, you need register
UNDERCARRIAGE
BAR GP-EQUALIZER
EQUALIZER BAR GP
7P-8939 EQUALIZER BAR GP
7P8939 EQUALIZER BAR GROUP
SERIAL NO. 4Z1 TO 4Z285 INCLUSIVE
EQUALIZER BAR GP
7P-8939 EQUALIZER BAR GP
7P8939 EQUALIZER BAR GROUP
SERIAL NO. 4Z286-UP
IDLER GP
IDLER GP-FRONT
7P-8917 IDLER GP-FRONT
7P8917 FRONT IDLER GROUP-PART 1 OF 2
SERIAL NO. 4Z1 TO 4Z285 INCLUSIVE
7P-8917 IDLER GP-FRONT
7P8917 FRONT IDLER GROUP-PART 2 OF 2
SERIAL NO. 4Z1 TO 4Z285 INCLUSIVE
IDLER GP-FRONT
7P-8917 IDLER GP-FRONT
7P8917 FRONT IDLER GROUP-PART 1 OF 2
SERIAL NO. 4Z286-UP
7P-8917 IDLER GP-FRONT
7P8917 FRONT IDLER GROUP-PART 2 OF 2
SERIAL NO. 4Z286-UP
PIVOT BAR GP
PIVOT BAR GP
7P-8914 PIVOT BAR GP
7P8914 PIVOT BAR GROUP
ROLLER GP
ROLLER GP-TRACK CARRIER
6K-9880 ROLLER GP-TRACK CARRIER
6K9880 TRACK CARRIER ROLLER GROUP-2 REQUIRED
ROLLER GP-TRACK-SINGLE FLANGE
9P-4208 ROLLER GP-TRACK-SINGLE FLANGE
9P4208 TRACK ROLLER GROUP-SINGLE FLANGE-8 REQUIRED
ROLLER GP-TRACK-DOUBLE FLANGE
9P-4211 ROLLER GP-TRACK-DOUBLE FLANGE
9P4211 TRACK ROLLER GROUP-DOUBLE FLANGE-4 REQUIRED
SEAL & BUSHING GP
6T-3578 SEAL & BUSHING GP
6T3578 SEAL AND BUSHING GROUP
TRACK GP
TRACK GP
3T-2183 TRACK GP
3T2183 TRACK GROUP-460 MM (18 IN.) DOUBLE GROUSER SHOE-SEALED AND
LUBRICATED-2 REQUIRED
TRACK GP
3Y-7648 TRACK GP
3Y7648 TRACK GROUP-460 MM (18 IN.) TRIPLE GROUSER SHOE-SEALED AND
LUBRICATED-2 REQUIRED
AN ATTACHMENT
FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
7P-8916 FRAME GP-TRACK ROLLER
7P8916 TRACK ROLLER FRAME GROUP
SERIAL NO. 4Z1 TO 4Z298 INCLUSIVE
FRAME GP-TRACK ROLLER
8G-5445 FRAME GP-TRACK ROLLER
8G5445 TRACK ROLLER FRAME GROUP
SERIAL NO. 4Z299-UP

Information:

(For parts list, see above)

Disassembly and Assembly
Equalizer Bar Supports
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Equalizer Bar And Pads
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
FT1485 Equalizer Pad Compressor Bar Available For Removal And Installation Of Center Pin And Equalizer Bar{7206,7209,0622}
1981/01/12
New Equalizer Bar Permits Lubrication Of Spherical Bushings And Recoil Rod Assembly{7206,4159}
1982/01/25
Replacement End Caps Available For Equalizer Bar {7206}
1986/07/07
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Specifications
Front Idlers And Recoil Springs
943 & 953 TRACK-TYPE LOADERS
Track Adjustment
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Disassembly and Assembly Procedures for Idlers of Track-Type Loaders {4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Front Idlers And Yokes
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Front Idlers And Yokes
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Front Idlers And Yokes
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters And Recoil Springs (943)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters And Recoil Springs (953)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Single Locknuts Used In Place Of Double Standard Nuts On Studs For Track Adjuster Covers To Permit Easier Access{4151,4157}
1981/03/09
Gasket Now Available Separately For Track Adjuster Cover{4151,4157}
1981/09/07
Shaft Available For Service Of Idler Link Assembly{4159}
1981/11/30
New Equalizer Bar Permits Lubrication Of Spherical Bushings And Recoil Rod Assembly{7206,4159}
1982/01/25
Bolts Now Used To Hold Track Adjuster Covers{4157,4151}
1982/03/29
New Idler Guard Group Available{4150,4159}
1984/03/26
Oil Capacities, Bolt Torques, And FT Tools For Track Rollers And Idlers {4159,4180,0729}
1986/11/03
Bottom Of Idler Swing Links Can Now Be Lubricated; New Link Assemblies And Seals Used On 963, 973 Loaders {4159}
1987/08/03
Track Guards Can Be Moved Forward To Give Longer Life To Track Adjuster Rod{4159,4170}
1988/02/22
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Undercarriage Reconditioning Bulletin
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Service Magazine
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Specifications
Pivot Bar Group
943 & 953 TRACK-TYPE LOADERS
Reuse And Salvage Guidelines
Thermal Spray Procedures for Track Loader Pivot Shaft{0599, 0679, 4153}
Thermal Spray Procedures for Track Loader Pivot Shaft{0599, 0679, 4153}
Disassembly and Assembly
Pivot Shafts
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Improved Cover For Pivot Bar Prevents Contact With Track Roller Frame{4150}
1981/12/14
Pivot Bar Oil Level{4153}
1982/09/27
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Specifications
Track Carrier Rollers
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Disassembly and Assembly
Track Carrier Rollers
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Carrier Rollers
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
New Track Roller Groups Have A Longer Service Life{4180}
1984/03/26
Oil Capacities, Bolt Torques, And FT Tools For Track Rollers And Idlers {4159,4180,0729}
1986/11/03
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Undercarriage Reconditioning Bulletin
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Specifications
Front Idlers And Recoil Springs
943 & 953 TRACK-TYPE LOADERS
Disassembly and Assembly
Track Adjusters And Recoil Springs (943)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters And Recoil Springs (953)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Important Assembly Procedure for Track Adjusters {4157}
2003/03/31
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Track Brakes<BR> (8G956) - 943, (8G9616) - 953
943 & 953 TRACK-TYPE LOADERS
Track Rollers<BR> (Single and Double Flange)
943 & 953 TRACK-TYPE LOADERS
Track
943 & 953 TRACK-TYPE LOADERS
Track Adjustment
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Troubleshooting
Machine Operation - Check
943 Track-Type Loader Hydrostatic Power Control Unit
Machine Will Not Track Straight in FORWARD or in REVERSE - Check
943 Track-Type Loader Hydrostatic Power Control Unit
One Track Starts before the Other Track Starts - Check
943 Track-Type Loader Hydrostatic Power Control Unit
One Track Stops before the Other Track Stops - Check
943 Track-Type Loader Hydrostatic Power Control Unit
Disassembly and Assembly
Track Rollers
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Tracks
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Adjustment Of Tracks
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Tracks
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters And Recoil Springs (943)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters And Recoil Springs (953)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Adjusters
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Pump (Track Brake Release)
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Track Brakes
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Single Locknuts Used In Place Of Double Standard Nuts On Studs For Track Adjuster Covers To Permit Easier Access{4151,4157}
1981/03/09
Gasket Now Available Separately For Track Adjuster Cover{4151,4157}
1981/09/07
Improved Cover For Pivot Bar Prevents Contact With Track Roller Frame{4150}
1981/12/14
Stronger Steel Used In Track Guide Guards And Wear Strips{4177,4178}
1982/07/05
Procedure To Check Track Brake Wear{4353}
1982/07/19
Modification Of Track Roller Frames{4151}
1983/05/23
You Must Use A Brake Release Pump When You Tow Track-Type Loaders{0623,4354}
1984/04/16
Identification Of Track Motor Universal Joint Assemblies{3251,3201,5058}
1985/05/27
Track Guards Can Be Moved Forward To Give Longer Life To Track Adjuster Rod{4159,4170}
1988/02/22
Track Shoe Improvements{4172}
1992/02/03
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Undercarriage Reconditioning Bulletin
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Snap Ring Roller Disassembly and Assembly Procedures {0729, 4150, 4180, 4181}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Service Magazine
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Specifications
Track Roller Frame
943 & 953 TRACK-TYPE LOADERS
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Disassembly and Assembly
Track Roller Frames
943 & 953 TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Single Locknuts Used In Place Of Double Standard Nuts On Studs For Track Adjuster Covers To Permit Easier Access{4151,4157}
1981/03/09
Gasket Now Available Separately For Track Adjuster Cover{4151,4157}
1981/09/07
Improved Cover For Pivot Bar Prevents Contact With Track Roller Frame{4150}
1981/12/14
Bolts Now Used To Hold Track Adjuster Covers{4157,4151}
1982/03/29
Service Replacement Of Track Roller Frames{4151}
1982/04/26
Modification Of Track Roller Frames{4151}
1983/05/23
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 943, Construction
17,730 
Caterpillar 943, Construction
- track loaders
ZEPPELIN BAUMASCHINEN
Germany
 
17.823 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders

 
18,302 
Caterpillar 943, Construction
- track loaders

Caterpillar TH943D, Construction
1,991 
Caterpillar TH943D, Construction
- forks
FINNING CANADA – USED ATTACHMENTS
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.