AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

943 LGP TRACK LOADER / HIGH DRIVE / 04Z00001-00306 (MACHINE) POWERED BY 3304 ENGINE WORK TOOLS Caterpillar SIS



TRACK LOADER 943 TRACK LOADER 04Z
 943 LGP TRACK LOADER / HIGH DRIVE / 04Z00001-00306 (MACHINE) POWERED BY 3304 ENGINE SEBP1262 943 04Z   (1980)

Parts group 943:

  For full view, you need register
WORK TOOLS
BUCKET GP
8V-7363 BUCKET AR-MULTIPURPOSE
8V7363 MULTI-PURPOSE BUCKET ARRANGEMENT-1.00 M3 (1.3 YD.3)
FOR USE WITH 3RD VALVE FOR MULTI-PURPOSE BUCKET TO OPERATE BUCKET
CYLINDERS-1.00 CU.M(1.25 CU. YD.
AN ATTACHMENT
BUCKET GP-MULTIPURPOSE
8V-7359 BUCKET GP-MULTIPURPOSE
8V7359 MULTI-PURPOSE BUCKET GROUP-1.03 M3 (1.3 YD.3)-2256 MM (88.82 IN.)
WIDE. PART OF 8V7363 MULTI-PURPOSE BUCKET ARRANGEMENT LISTED ON PAGE 186
AN ATTACHMENT
BUCKET AS-GENERAL PURPOSE
4V-8695 BUCKET AS-GENERAL PURPOSE
4V8695 GENERAL PURPOSE BUCKET ASSEMBLY-1.15 M3 (1.5 YD.3)-2210 MM
(87.0 IN.) WIDE
NOTE: 1U1896 LONG WEARING END BIT IS AVAILABLE. AN ATTACHMENT
FELLER BUNCHER AR
3W-1026 FELLER BUNCHER AR
3W1026 FELLER BUNCHER ARRANGEMENT-WITHOUT LIFT ARMS
AN ATTACHMENT
GROUND ENGAGING TOOLS (G.E.T.)
CUTTING EDGES-FIELD INSTALLATION
CUTTING EDGES-FIELD INSTALLATION
BIT & CUTTING EDGE GP
3G-4429 BIT & CUTTING EDGE GP
3G4429 BIT AND CUTTING EDGE GROUP
FOR USE WITH 4V8695 GENERAL PURPOSE BUCKET ASSEMBLY SHOWN ON
PAGE 187. NOTE: 1U1896 LONG WEARING END BIT IS AVAILABLE. AN ATTACHMENT
EDGE GP-CUTTING
4T-9562 EDGE GP-CUTTING
4T9562 CUTTING EDGE GROUP
FOR USE WHEN EQUIPPED WITH A BUCKET WITH 8V7453 BASE EDGE
AN ATTACHMENT
TOOTH GP-RIPPER
9J-1137 TOOTH GP-RIPPER
9J1137 RIPPER TOOTH GROUP
ALSO PART OF 9J4329 RIPPER GROUP SHOWN ON PAGE 189
AN ATTACHMENT
TIP-ABRASION
4T-2253 TIP-ABRASION
4T2253 ABRASION TIP GROUP-BUCKET-FIELD INSTALLATION
FOR USE WITH SIDE PINNED ADAPTER
TOOTH GP-SHORT
3G-4018 TOOTH GP-SHORT
3G4018 TOOTH GROUP-SHORT
9J3178 TIP PARTS ARE SHOWN ON PAGE 192
AN ATTACHMENT
TOOTH GP-LONG
3G-4017 TOOTH GP-LONG
3G4017 TOOTH GROUP-LONG
9J3169 TIP PARTS ARE SHOWN ON PAGE 192
AN ATTACHMENT
TIP GP-SHORT
9J-3178 TIP GP-SHORT
9J3178 TIP GROUP-SHORT-EXTREME SERVICE
PART OF 3G4018 TOOTH GROUP SHOWN ON PAGE 191
AN ATTACHMENT
TIP GP-LONG
9J-3169 TIP GP-LONG
9J3169 TIP GROUP-LONG
PART OF 3G4017 TOOTH GROUP SHOWN ON PAGE 191
AN ATTACHMENT
RIPPER GP
3G-1620 RIPPER AR
3G1620 RIPPER ARRANGEMENT
RIPPER SERIAL NO. 63Y1-UP
ALSO PART OF 3G1619 RIPPER ARRANGEMENT
3G-1619 RIPPER AR
3G1619 RIPPER ARRANGEMENT
AN ATTACHMENT
MOUNTING GP-RIPPER
3G-1349 MOUNTING GP-RIPPER
3G1349 RIPPER MOUNTING GROUP
REPLACED BY 4T0661 SHOWN ON PAGE 189B
PART OF 3G1619 RIPPER ARRANGEMENT LISTED ON PAGE 188
AN ATTACHMENT
RIPPER GP
9J-4329 RIPPER GP
9J4329 RIPPER GROUP
RIPPER SERIAL NO. 63Y1-UP. PART OF 3G1620 & 3G1619 RIPPERS
9J1137-PAGE 190. NOTE: TWO 9J1137 TOOTH
GROUPS MAY BE ADDED WHEN CONVERTING FROM 1 TO 3 SHANK RIPPER
MOUNTING GP-RIPPER
4T-0661 MOUNTING GP-RIPPER
4T0661 RIPPER MOUNTING GROUP
PART OF 3G1619 RIPPER ARRANGEMENT LISTED ON PAGE 188
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Specifications
Bucket Positioner Adjustment Procedure
943 & 953 TRACK-TYPE LOADERS
Bucket Control Group
943 & 953 TRACK-TYPE LOADERS
Multi-Purpose Bucket Cylinders<BR> (9J4892)
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Bucket Lever And Link
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Service Magazine
Welding Fixture For Installation Of Bucket Corner Guards Available{0626,6100,6801,6802}
1981/03/30
Longer Grease Fitting Can Be Used In Bucket Pin Assemblies{6104}
1981/10/12
New Front Lines Group Can Prevent Possible Damage To Hoses {5057,6104}
1981/10/26
Orifice/Choke Added To Tilt Cylinder Lines For Better Bucket Control{5057}
1982/03/15
Spill Plates Added To Buckets{6101,6104}
1982/04/26
New Levers And Hardware Used In Bucket Positioner Group{5112,5122}
1982/12/13
New Relief Valve Keeps Bucket In Dump Position When Backdragging{5117}
1983/10/24
Special Instruction Form Explains Weld Repair Of Bucket Corners For Corner Guard Systems{6802,6816}
1984/06/04
Improvements Made To Lift Arms, Buckets And Bucket Pins{6100,6108,6109}
1986/08/18
Thicker Wear Edges And End Bits Available For Wide Multi-Purpose Buckets{6801,6804}
1988/08/08
Hinge Areas of General Purpose Buckets Can Be Reinforced{6101}
1988/11/07
New Bucket Hinge Will Make Field Rework Easier {6104}
1989/05/29
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the &quot;K Series&quot; Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Specifications
Bit, Cutting Edge And Tooth Groups
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Welding Fixture For Installation Of Bucket Corner Guards Available{0626,6100,6801,6802}
1981/03/30
Thicker Wear Edges And End Bits Available For Wide Multi-Purpose Buckets{6801,6804}
1988/08/08
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
Specifications
Ripper Cylinders<BR> (3G1296)
943 & 953 TRACK-TYPE LOADERS
Ripper Mounting Group
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinder Mounting Group
943 & 953 TRACK-TYPE LOADERS
Reuse And Salvage Guidelines
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 943, Construction
17,730 
Caterpillar 943, Construction
- track loaders
ZEPPELIN BAUMASCHINEN
Germany
 
17.823 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders

 
18,302 
Caterpillar 943, Construction
- track loaders

Caterpillar TH943D, Construction
1,991 
Caterpillar TH943D, Construction
- forks
FINNING CANADA – USED ATTACHMENTS
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.