AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9J0532 LIFT CYLINDER GROUP (CHANGE 6) 102 MM (4 IN.) BORE X 715 MM (27.9 IN.) STROKE SERIAL NO. 4Z1 TO 4Z305 INCLUSIVE 943


HYDRAULIC SYSTEM
CYLINDER GP
PIN GP
CYLINDER GP
PUMP GP

TRACK LOADER 943 TRACK LOADER 04Z
 943 LGP TRACK LOADER / HIGH DRIVE / 04Z00001-00306 (MACHINE) POWERED BY 3304 ENGINE SEBP1262 943 04Z   (1980)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-LIFT
9J-0532 CYLINDER GP-LIFT
CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP
3G-4653 CYLINDER GP
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
 

#SEBP12620460
 

9J-0532: CYLINDER GP-LIFT

9J0532 LIFT CYLINDER GROUP (CHANGE 6)
102 MM (4 IN.) BORE X 715 MM (27.9 IN.) STROKE
SERIAL NO. 4Z1 TO 4Z305 INCLUSIVE
c344744 SEBP1262
9J0532 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0533 R [1] CYLINDER AS  
2. 3G-8595 [1] BEARING-SLEEVE  
3. 5J-8225 J [1] SEAL-U-CUP  
4. 7J-6461 [1] CROWN  
5. 4J-3515 J [1] SEAL-LIP TYPE  
6. 9J-0538 R [1] ROD AS  
7. 5J-3616 J [1] SEAL-RING  
8. 2K-6830 J [1] RING-BACK-UP  
9. 1H-8128 J [1] SEAL-O-RING  
10. 9J-9788 [1] HEAD  
11. 9J-9789 [1] PISTON  
12. 5J-5402 J [1] SEAL AS  
13. 6J-2797 J [1] RING-WEAR  
14. 8J-7415 [1] WASHER-HARD  
15. 7J-5639 [1] BOLT-SELF LOCKING  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1439 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES ALL PARTS
    MARKED J)
    MARTY
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12620461
 

4T-1963: CYLINDER GP

4T1963 LIFT CYLINDER GROUP-(CHANGE 0)-101.6 MM (4.7 IN.) BORE X 742 MM
(29.2 IN.) STROKE-2 REQUIRED
SERIAL NO. 4Z306-UP
c355230 SEBP1262
4T1963 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1964 R [1] CYLINDER AS  
2. 3G-8595 [1] BEARING-SLEEVE  
3. 5J-8225 J [1] SEAL-U-CUP  
4. 7J-6461 [1] CROWN  
5. 4J-3515 J [1] SEAL-LIP TYPE  
6. 4T-1966 R [1] ROD AS  
7. 5J-3616 J [1] SEAL-RING  
8. 2K-6830 J [1] RING-BACK-UP  
9. 1H-8128 J [1] SEAL-O-RING  
10. 9J-9788 [1] HEAD  
11. 9J-9789 [1] PISTON  
12. 6J-2797 J [1] RING-WEAR  
13. 5J-5402 [1] SEAL AS  
14. 5P-8250 [1] WASHER  
15. 7J-5639 [1] BOLT-SELF LOCKING  
    THE FOLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1439 [1] KIT-HYD CYLINDER SEAL  
    (INCL PARTS MARKED J)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12620462
 

3G-4653: CYLINDER GP

3G4653 TILT CYLINDER GROUP (CHANGE 1) 121 MM (4.7 IN.) BORE X 493.0 MM
(19.2 IN.) STROKE
SERIAL NO. 4Z1 TO 4Z250 INCLUSIVE
c344287 SEBP1262
3G4653 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4652 R [1] CYLINDER AS  
2. 3G-8605 [1] CAP AS  
  3G-4651 [1] CAP  
3. 3G-8606 [1] BEARING-SLEEVE  
4. 3J-9545 [1] NUT-SELF LOCKING  
5. 4J-3342 J [1] RING-WEAR  
6. 5J-4987 J [1] SEAL AS  
7. 1D-4627 [2] BOLT  
8. 5P-8249 [4] WASHER  
9. 5J-0964 J [1] SEAL-U-CUP  
10. 1K-6982 J [1] SEAL-LIP TYPE  
11. 3G-4643 R [1] ROD AS  
12. 3G-8606 [1] BEARING-SLEEVE  
13. 1D-4626 [2] BOLT  
14. 5J-3620 J [1] SEAL-RING  
15. 3G-4650 [1] HEAD  
16. 5H-6734 J [1] SEAL-O-RING  
  2J-3961 J [1] RING-BACK-UP  
17. [1] WASHER  
18. 3G-4649 [1] PISTON  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1381 C [1] KIT-HYD CYLINDER SEAL (SEAL)  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12620463
 

1U-4802: CYLINDER GP-TILT

1U4802 TILT CYLINDER GROUP (CHANGE 0)-121 MM (4.75 IN.) BORE X 493 MM
(19.4 IN.) STROKE
SERIAL NO. 4Z251-UP
c301146 SEBP1262
1U4802 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4801 R [1] CYLINDER AS  
  9S-7725 [1] PLUG-SEALING  
  3D-2824 [1] SEAL-O-RING  
  0T-0690 [4] BOLT  
2. 3G-8605 [1] CAP AS  
  3G-8606 [1] BEARING  
3. 3G-4649 [1] PISTON  
4. 3J-9545 [1] NUT-SELF LOCKING  
5. 4J-3342 [1] RING-WEAR  
6. 5J-4987 [1] SEAL AS  
7. 1D-4627 [2] BOLT  
8. 5P-8249 [2] WASHER  
9. 5J-0964 [1] SEAL-U-CUP  
10. 1K-6982 [1] SEAL-LIP TYPE  
11. 3G-4643 R [1] ROD AS  
12. 1U-4049 [1] WASHER  
13. 5H-6734 [1] SEAL-O-RING  
  2J-3961 [1] RING-BACK-UP  
14. 5J-3620 [1] SEAL-RING  
15. 3G-4650 [1] HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12620464
 

9J-4892: CYLINDER GP-BUCKET

9J4892 BUCKET CYLINDER GROUP (2V9862 N/S)-(CHANGE 2)-101.6 MM (4.7 IN.)
BORE X 257.0 MM (10.1 IN.) STROKE-2 REQUIRED-REPLACED BY 9V8168-PAGE 178B
AN ATTACHMENT
c226679 SEBP1262
9J4892 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4891 R [1] CYLINDER ASSEM.  
    (Includes)
2. 8J-5667 [1] BEARING  
3. 7K-9204 A [2] SEAL  
4. 2J-3950 [1] NUT  
5. 6J-2797 [1] RING  
6. 1H-8128 [1] SEAL  
7. 2K-6830 [1] RING  
8. 5J-8200 [1] SEAL  
9. 1K-6981 [1] SEAL  
10. 8J-5668 R [1] ROD ASSEM.  
    (Includes)
11. 7J-9688 [1] BEARING  
12. 0S-1625 [4] BOLT  
  5P-8247 [4] WASHER  
13. 7J-6475 [1] HEAD  
14. 5J-5402 [1] SEAL ASSEM.  
15. 6J-2798 [1] PISTON  
16. 6J-6917 [1] SEAL  
17. 7K-9202 A [2] SEAL  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12620465
 

3W-1024: PIN GP-CYLINDER

3W1024 CYLINDER PIN GROUP
AN ATTACHMENT
c322577 SEBP1262
3W1024 PIN GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-6627 [6] FITTING-HYDRAULIC  
2. 8G-0878 [2] PIN AS  
3. 7K-9208 [4] SEAL-LIP TYPE  
4. 0S-1589 [2] BOLT  
5. 7P-1579 [2] SPACER  
6. 0S-1566 [4] BOLT  
  2S-7593 [4] WASHER-HARD 5MM(.20IN)THK EA  
  8S-1069 [4] WASHER  
    12.7MM(.50IN)THK EA
7. 8G-0875 [2] PIN AS  
8. 7K-9203 [8] SEAL-LIP TYPE  
9. 7P-1577 [2] PIN AS  
 

#SEBP12620466
 

9V-8168: CYLINDER & SEAL GP

9V8168 SEAL & CYLINDER GROUP
4T9387-PAGE 178C
AN ATTACHMENT
c322055 SEBP1262
9V8168 CYLINDER & SEAL GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9387 Y [1] CYLINDER GP  
2. 7K-9204 [2] SEAL-LIP TYPE 69.95MM(2.75IN)OD  
  7K-9202 [2] SEAL-LIP TYPE 57.25MM(2.25IN)OD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12620467
 

4T-9387: CYLINDER GP

4T9387 CYLINDER GROUP
PART OF 9V8168 SEAL & CYLINDER
AN ATTACHMENT
c322056 SEBP1262
4T9387 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9386 [1] CYLINDER AS  
  4T-9862 [1] CAP AS  
2. 8J-5667 [1] BEARING-SLEEVE  
3. 7V-4240 [4] BLOCK  
4. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 4T-9384 [1] ROD AS  
9. 7J-9688 [1] BEARING-SLEEVE  
10. 7J-6461 [1] CROWN  
11. 1H-8128 [1] SEAL-O-RING  
  2K-6830 [1] RING-BACK-UP  
12. 7J-6462 [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 6J-2797 [1] RING-WEAR  
15. 7J-5639 [1] BOLT-SELF LOCKING  
  5P-8250 [1] WASHER  
 

#SEBP12620468
 

3G-1296: CYLINDER GP

3G1296 RIPPER CYLINDER GROUP (CHANGES 1-3)-101.6 MM (4.7 IN.) BORE X
270.0 MM (10.6 IN.) STROKE
PART OF 3G5128 & 4T0660 RIPPER MOUNTING AND CYLINDER GROUPS SHOWN ON PAGES
190 & 190A. AN ATTACHMENT
c500961 SEBP1262
3G1296 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER AS  
2. 7J-5639 [1] BOLT-SELF LOCKING  
  8J-7415 [1] WASHER-HARD  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 3G-1294 [1] ROD AS  
9. 7J-6461 [1] CROWN  
10. 9S-4190 [1] PLUG  
  2M-9780 [1] SEAL-O-RING  
11. 1H-8128 [1] SEAL-O-RING  
12. 7J-6462 [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 2K-6830 [1] RING-BACK-UP  
 

#SEBP12620469
 

1U-3519: CARTRIDGE GP

1U3519 CARTRIDGE GROUP-CLOCKWISE*R
PART OF 3G1752 VANE PUMP GROUP SHOWN ON PAGE 180
c402151 SEBP1262
1U3519 CARTRIDGE GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3078 [4] SEAL-O-RING  
2. 3G-2192 [4] RETAINER-SEAL  
3. 9T-5041 [2] DOWEL  
4. 9T-5047 [1] PLATE-INLET  
5. 064-7311 [1] KIT-VANE  
6. 9T-5065 [1] RING  
7. 6V-1197 [1] SEAL-O-RING  
8. 8J-4351 [1] SEAL-O-RING  
9. 9T-5086 [1] RING  
10. 9T-5090 [1] PLATE-OUTLET  
11. 3G-2193 [1] RING-SEAL  
12. 9T-5098 [2] FLEXPLATE  
13. 064-7310 [1] ROTOR-PUMP  
14. 9T-5110 [2] SCREW  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Relief Valves For Attachment Cylinder And Head End Of Tilt Cylinder<BR> (9J458)
943 & 953 TRACK-TYPE LOADERS
Relief Valve For Rod End Of Tilt Cylinder<BR> (9J459)
943 & 953 TRACK-TYPE LOADERS
Relief Valve For Head End Of Lift Cylinder<BR> (3G9804)
943 & 953 TRACK-TYPE LOADERS
943 Lift Cylinders<BR> (9J532)
943 & 953 TRACK-TYPE LOADERS
943 Tilt Cylinder<BR> (3G4653 &amp; 1U4802)
943 & 953 TRACK-TYPE LOADERS
953 Lift Cylinders<BR> (3G717)
943 & 953 TRACK-TYPE LOADERS
953 Tilt Cylinder<BR> (1U418)
943 & 953 TRACK-TYPE LOADERS
Multi-Purpose Bucket Cylinders<BR> (9J4892)
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinders<BR> (3G1296)
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinder Mounting Group
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Lift Cylinders
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Tilt Cylinder
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Service Magazine
6V86 And 6V4035 Sleeve Assemblies Are Available To Remove Pins From Hydraulic Cylinders And Linkage{0621}
1981/01/19
Locknuts And Lower Torque Prevent Clamp Damage To Lift Cylinder Lines{5057}
1981/06/29
Orifice/Choke Added To Tilt Cylinder Lines For Better Bucket Control{5057}
1982/03/15
6V3155 Brace Assembly For Support Of Lift Arms {0691,5102}
1982/11/29
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
Tilt Cylinder Lines Group Uses A New Elbow And Longer Hose And Tube Assemblies{5057}
1985/03/11
New Relief Valve And Baffle Used In Lift Cylinder Hydraulic Circuit{5117,5102}
1985/08/12
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 943 :

LINES GP-PUMP
7P-4686 LINES GP-PUMP
LINES GP-ATTACHMENT
7P-1094 LINES GP-ATTACHMENT
LINES GP-TILT CYLINDER
3W-1025 LINES GP-TILT CYLINDER
VALVE & LINES GP
3W-1295 VALVE & LINES GP
LINES GP-RIPPER
1U-4504 LINES GP-RIPPER
LINES GP-BUCKET
9V-8414 LINES GP-BUCKET
LINES GP-BUCKET
8V-7362 LINES GP-BUCKET
LINES GP-REAR ATTACHMENT
8G-3976 LINES GP-REAR ATTACHMENT
CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP
3G-4653 CYLINDER GP
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
PIN GP-CYLINDER
3W-1024 PIN GP-CYLINDER
CYLINDER & SEAL GP
9V-8168 CYLINDER & SEAL GP
CYLINDER GP
4T-9387 CYLINDER GP
CYLINDER GP
3G-1296 CYLINDER GP

Truck sale:

Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 943, Construction
17,730 
Caterpillar 943, Construction
- track loaders
ZEPPELIN BAUMASCHINEN
Germany
 
17.823 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders

 
18,302 
Caterpillar 943, Construction
- track loaders

Caterpillar TH943D, Construction
1,991 
Caterpillar TH943D, Construction
- forks
FINNING CANADA – USED ATTACHMENTS
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.