ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CYLINDER BLOCK GPENGINE ARRANGEMENT
ENGINE AR#SEBP12680001
7N-1188: ENGINE AR
7N1188 ENGINE ARRANGEMENT-PART 1
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. NOTE: WHEN ORDERING PARTS
GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. NOTE: WHEN ORDERING PARTS
GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 7N-8016 RY | [1] | CYLINDER BLOCK GROUP | ||
| 7N-1292 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 6N-8079 Y | [1] | CRANKSHAFT GROUP | ||
| 2P-6224 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 8N-2531 Y | [6] | CONNECTING ROD AND PISTON GROUP | ||
| - OR - | ||||
| SERIAL NO.8Z1 TO 8Z4881 INCLUSIVE | ||||
| 1W-6588 Y | [6] | CONNECTING ROD AND PISTON GROUP | ||
| SERIAL NO.8Z4882--UP | ||||
| 2P-6202 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| UPPER STRUCTURE | ||||
| 8N-0226 RY | [1] | CYLINDER HEAD GROUP | ||
| - OR - | ||||
| 1W-3356 Y | [1] | CYLINDER HEAD GROUP | ||
| 2P-6530 Y | [1] | CYLINDER HEAD COVER GROUP | ||
| 7N-9536 Y | [1] | CYLINDER HEAD FASTENER GROUP | ||
| 7N-8026 Y | [1] | VALVE MECHANISM GROUP | ||
| 8N-4745 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 1W-5567 Y | [1] | ENGINE LIFTING GROUP | ||
| - OR - | ||||
| 7N-9122 Y | [1] | ENGINE LIFTING GROUP | ||
| FRONT STRUCTURE | ||||
| 2P-9641 Y | [1] | FRONT HOUSING GROUP | ||
| 2P-6529 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 2P-6498 Y | [1] | FRONT HOUSING FASTENER GROUP | ||
| 2P-9642 Y | [1] | FRONT TIMING GEAR GROUP | ||
| 7N-9589 Y | [1] | TRUNNION GROUP | ||
| 4N-3238 Y | [1] | DAMPER GROUP | ||
| 8N-5585 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 2P-6166 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 1P-9581 Y | [1] | FLYWHEEL GROUP | ||
| LOWER STRUCTURE | ||||
| 2P-9647 Y | [1] | OIL PAN GROUP | ||
| 2P-6200 Y | [1] | OIL PAN FASTENER GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680002
7N-1188: ENGINE AR
7N1188 ENGINE ARRANGEMENT-PART 2
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. NOTE: WHEN ORDERING PARTS
GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. NOTE: WHEN ORDERING PARTS
GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 2P-1784 Y | [1] | ENGINE OIL PUMP GROUP | ||
| 2P-6105 Y | [1] | ENGINE OIL LINES GROUP | ||
| 2P-6475 Y | [1] | OIL FILTER GROUP | ||
| 2P-6855 Y | [1] | OIL FILLER GROUP | ||
| 1P-4244 Y | [1] | BREATHER GROUP | ||
| 2P-6493 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 7N-6206 Y | [1] | WATER PUMP GROUP | ||
| 7N-7211 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO.8Z1 TO 8Z3641 INCLUSIVE | ||||
| - OR - | ||||
| 1N-4219 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO.8Z3642-UP | ||||
| 2P-6215 Y | [1] | ENGINE OIL COOLER GROUP | ||
| 2P-6508 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| INTAKE AND EXHAUST SYSTEM | ||||
| 2P-6572 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 4N-9586 Y | [1] | EXHAUST MANIFOLD FASTENER GROUP | ||
| 2P-9613 Y | [1] | AIR COMPRESSOR GROUP | ||
| - OR - | ||||
| 7N-9912 Y | [1] | AIR COMPRESSOR GROUP | ||
| 2P-7797 Y | [1] | AIR COMPRESSOR LINES GROUP | ||
| - OR - | ||||
| 7N-9919 Y | [1] | AIR COMPRESSOR LINES GROUP | ||
| FUEL SYSTEM AND GOVERNOR | ||||
| 8N-6838 Y | [1] | FUEL PRIMING PUMP & PRIMARY FILTER | ||
| GROUP | ||||
| - OR - | ||||
| 8N-4454 Y | [1] | FUEL PRIMING PUMP & PRIMARY FILTER | ||
| GROUP | ||||
| 7N-1739 Y | [1] | GOVERNOR AND FUEL INJECTION PUMP GROUP | ||
| 7N-1647 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 4N-4510 Y | [1] | GOVERNOR COVER GROUP | ||
| 7N-3900 Y | [1] | DRAIN LINES GROUP | ||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680003
2W-0819: ENGINE AR
2W0819 ENGINE ARRANGEMENT-PART 1 OF 2
3306 ENGINE SERIAL NO. 8Z18852-UP
3306 ENGINE SERIAL NO. 8Z18852-UP
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 8N-5286 RY | [1] | CYLINDER BLOCK GROUP | ||
| 7N-1292 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 6N-8079 Y | [1] | CRANKSHAFT GROUP | ||
| 2P-6224 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| SERIAL NO. 8Z18852 TO 8Z27915 INCLUSIVE | ||||
| & 8Z31079-UP. | ||||
| 2P-6226 Y | [1] | SEAL GROUP-CRANKSHAFT | ||
| SERIAL NO. 8Z27916 TO 8Z31078 INCLUSIVE | ||||
| 1W-6588 Y | [6] | CONNECTING ROD & PISTON GROUP | ||
| 1N-4406 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| UPPER STRUCTURE | ||||
| 8N-0226 RY | [1] | CYLINDER HEAD GROUP | ||
| 2P-6530 Y | [1] | CYLINDER HEAD COVER GROUP | ||
| 7N-9536 Y | [1] | CYLINDER HEAD FASTENER GROUP | ||
| 7N-8026 Y | [1] | VALVE MECHANISM GROUP | ||
| 8N-4745 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 7N-9122 Y | [1] | ENGINE LIFTING GROUP | ||
| FRONT STRUCTURE | ||||
| 8N-0303 Y | [1] | FRONT HOUSING GROUP | ||
| 8N-0872 Y | [1] | FRONT HOUSING FASTENER GROUP | ||
| 1W-5634 Y | [1] | FRONT GEAR GROUP | ||
| -OR- | ||||
| 7W-2859 Y | [1] | FRONT GEAR GROUP | ||
| 2P-6529 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 4N-3238 Y | [1] | DAMPER GROUP | ||
| 7N-9589 Y | [1] | TRUNNION GROUP | ||
| 8N-5585 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 2P-6166 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| SERIAL NO. 8Z18852 TO 8Z31078 INCLUSIVE | ||||
| 7W-9643 Y | [1] | HOUSING GROUP-FLYWHEEL | ||
| SERIAL NO. 8Z31079-UP. | ||||
| 1P-9581 Y | [1] | FLYWHEEL GROUP | ||
| LOWER STRUCTURE | ||||
| 2P-9647 Y | [1] | OIL PAN GROUP | ||
| 2P-6200 Y | [1] | OIL PAN FASTENER GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680004
2W-0819: ENGINE AR
2W0819 ENGINE ARRANGEMENT-PART 2 OF 2
3306 ENGINE SERIAL NO. 8Z18852-UP
3306 ENGINE SERIAL NO. 8Z18852-UP
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 2P-1784 Y | [1] | ENGINE OIL PUMP GROUP | ||
| 2P-6105 Y | [1] | ENGINE OIL LINES GROUP | ||
| 2P-6475 Y | [1] | OIL FILTER GROUP | ||
| SERIAL NO.8Z18852 TO 8Z21156 INCLUSIVE | ||||
| 2P-6855 Y | [1] | OIL FILLER GROUP | ||
| 1P-4244 Y | [1] | BREATHER GROUP | ||
| S/N 8Z18852-8Z33001, 8Z35205-UP | ||||
| 2W-9160 Y | [1] | BREATHER GP | ||
| S/N 8Z33002-8Z35204 | ||||
| 2P-6493 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 7N-6206 Y | [1] | WATER PUMP GROUP | ||
| 1N-4219 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO.8Z18852 TO 8Z21156 INCLUSIVE | ||||
| 2W-7060 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO. 8Z21157-UP | ||||
| 2P-6215 Y | [1] | ENGINE OIL COOLER GROUP | ||
| SERIAL NO.8Z18852 TO 8Z21156 INCLUSIVE | ||||
| 2W-5636 Y | [1] | FILTER BASE & ENGINE OIL COOLER GROUP | ||
| SERIAL NO. 8Z21157-UP | ||||
| 2P-6508 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| SERIAL NO.8Z18852 TO 8Z21156 INCLUSIVE | ||||
| 2W-6780 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| SERIAL NO. 8Z21157-UP | ||||
| INTAKE AND EXHAUST SYSTEM | ||||
| 2P-6572 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 1W-4486 Y | [1] | EXHAUST MANIFOLD FASTENER GROUP | ||
| 7N-9912 Y | [1] | AIR COMPRESSOR GROUP | ||
| 8Z18852-8Z32189 | ||||
| 7W-8399 Y | [1] | COMPRESSOR GROUP | ||
| S/N 8Z32190-UP | ||||
| 7N-9919 Y | [1] | AIR COMPRESSOR LINES GROUP | ||
| S/N 8Z18852-8Z32189 | ||||
| 7W-8411 Y | [1] | LINES GP-COMPRESSOR | ||
| 8Z32190-UP | ||||
| FUEL SYSTEM AND GOVERNOR | ||||
| 2W-6229 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| 2W-3282 Y | [1] | SECONDARY FILTER GROUP | ||
| 2W-4012 Y | [1] | DRAIN LINES GROUP | ||
| 1W-5374 Y | [1] | FUEL PRIMING PUMP & PRIMARY FILTER GROUP | ||
| 2W-5261 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 2W-4160 Y | [1] | FUEL TRANSFER PUMP & MOUNTING GROUP | ||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680005
7N-8047: ENGINE AR
7N8047 ENGINE ARRANGEMENT-SOUND SUPPRESSION-80 DECIBEL-PART 1
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. FOR FRENCH MARKET AND
FOR USE WITH 6G6312 AND 6G6322 SPECTATOR SOUND SUPPRESSION ARRANGEMENTS
LISTED ON PAGE 167. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT
NUMBER AND SERIAL NUMBER
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. FOR FRENCH MARKET AND
FOR USE WITH 6G6312 AND 6G6322 SPECTATOR SOUND SUPPRESSION ARRANGEMENTS
LISTED ON PAGE 167. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT
NUMBER AND SERIAL NUMBER
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 7N-8016 RY | [1] | CYLINDER BLOCK GROUP | ||
| 7N-1292 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 6N-8079 Y | [1] | CRANKSHAFT GROUP | ||
| 2P-6224 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 8N-2531 Y | [6] | CONNECTING ROD AND PISTON GROUP | ||
| - OR - SERIAL NO.8Z1 TO 8Z6880 INCLUSIVE | ||||
| 1W-6588 Y | [6] | CONNECTING ROD AND PISTON GROUP | ||
| SERIAL NO.8Z6881--UP | ||||
| 2P-6202 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| 8N-9466 Y | [1] | PANEL GROUP | ||
| -OR- | ||||
| 1W-7670 Y | [1] | PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 8N-0226 RY | [1] | CYLINDER HEAD GROUP | ||
| 2P-6530 Y | [1] | CYLINDER HEAD COVER GROUP | ||
| 7N-9536 Y | [1] | CYLINDER HEAD FASTENER GROUP | ||
| 7N-8026 Y | [1] | VALVE MECHANISM GROUP | ||
| 8N-4745 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 1W-5567 Y | [1] | ENGINE LIFTING GROUP | ||
| - OR - | ||||
| 7N-9122 Y | [1] | ENGINE LIFTING GROUP | ||
| FRONT STRUCTURE | ||||
| 2P-9641 Y | [1] | FRONT HOUSING GROUP | ||
| 2P-6529 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 2P-6498 Y | [1] | FRONT HOUSING FASTENER GROUP | ||
| 2P-9642 Y | [1] | FRONT TIMING GEAR GROUP | ||
| 7N-9589 Y | [1] | TRUNNION GROUP | ||
| 4N-3238 Y | [1] | DAMPER GROUP | ||
| 8N-5585 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 2P-6166 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 1P-9581 Y | [1] | FLYWHEEL GROUP | ||
| LOWER STRUCTURE | ||||
| 2P-9647 Y | [1] | OIL PAN GROUP | ||
| 2P-6200 Y | [1] | OIL PAN FASTENER GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680006
7N-8047: ENGINE AR
7N8047 ENGINE ARRANGEMENT-SOUND SUPPRESSION-80 DECIBEL-PART 2
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. FOR FRENCH MARKET AND
FOR USE WITH 6G6312 AND 6G6322 SPECTATOR SOUND SUPPRESSION ARRANGEMENTS
LISTED ON PAGE 167. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT
NUMBER AND SERIAL NUMBER
3306 ENGINE SERIAL NO.8Z1 TO 8Z18851 INCLUSIVE. FOR FRENCH MARKET AND
FOR USE WITH 6G6312 AND 6G6322 SPECTATOR SOUND SUPPRESSION ARRANGEMENTS
LISTED ON PAGE 167. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT
NUMBER AND SERIAL NUMBER
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 2P-1784 Y | [1] | ENGINE OIL PUMP GROUP | ||
| 2P-6105 Y | [1] | ENGINE OIL LINES GROUP | ||
| 2P-6475 Y | [1] | OIL FILTER GROUP | ||
| 2P-6855 Y | [1] | OIL FILLER GROUP | ||
| 1P-4244 Y | [1] | BREATHER GROUP | ||
| 2P-6493 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 7N-6206 Y | [1] | WATER PUMP GROUP | ||
| 7N-7211 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO. 8Z1 TO 8Z16364 INCLUSIVE | ||||
| 1N-4219 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO. 8Z16365-UP | ||||
| 2P-6215 Y | [1] | ENGINE OIL COOLER GROUP | ||
| 2P-6508 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| INTAKE AND EXHUAST SYSTEM | ||||
| 2P-6572 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 6N-6031 Y | [1] | EXHAUST MANIFOLD FASTENER GROUP | ||
| 2P-9613 Y | [1] | AIR COMPRESSOR GROUP | ||
| SERIAL NO. 8Z1 TO 8Z16364 INCLUSIVE | ||||
| 7N-9912 Y | [1] | AIR COMPRESSOR GROUP | ||
| SERIAL NO. 8Z16365-UP | ||||
| 2P-7796 Y | [1] | AIR COMPRESSOR LINES GROUP | ||
| SERIAL NO. 8Z1 TO 8Z16364 INCLUSIVE | ||||
| 7N-9919 Y | [1] | AIR COMPRESSOR LINES GROUP | ||
| SERIAL NO. 8Z16365-UP | ||||
| FUEL SYSTEM AND GOVERNOR | ||||
| 8N-6838 Y | [1] | FUEL PRIMING PUMP & FILTER PUMP GROUP | ||
| - OR - | ||||
| 8N-4454 Y | [1] | FUEL PRIMING PUMP & FILTER PUMP GROUP | ||
| 7N-1739 Y | [1] | GOVERNOR AND FUEL INJECTION PUMP GROUP | ||
| 7N-1647 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 4N-4510 Y | [1] | GOVERNOR COVER GROUP | ||
| 7N-3900 Y | [1] | DRAIN LINES GROUP | ||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680007
2W-4483: ENGINE AR
2W4483 ENGINE ARRANGEMENT-PART 1 OF 2
3306 ENGINE SERIAL NO. 8Z18852-UP. FOR FRENCH MARKET
3306 ENGINE SERIAL NO. 8Z18852-UP. FOR FRENCH MARKET
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 8N-5286 RY | [1] | CYLINDER BLOCK GROUP | ||
| 7N-1292 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 6N-8079 Y | [1] | CRANKSHAFT GROUP | ||
| 2P-6224 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| SERIAL NO. 8Z18852 TO 8Z28499 INCLUSIVE | ||||
| & 8Z31079-UP. | ||||
| 2P-6226 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| SERIAL NO. 8Z28500 TO 8Z31078 INCLUSIVE | ||||
| 1W-6588 Y | [6] | CONNECTING ROD & PISTON GROUP | ||
| 1N-4406 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| 1W-7670 Y | [1] | SOUND SUPPRESSION PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 8N-0226 RY | [1] | CYLINDER HEAD GROUP | ||
| 2P-6530 Y | [1] | CYLINDER HEAD COVER GROUP | ||
| 7N-9536 Y | [1] | CYLINDER HEAD FASTENER GROUP | ||
| 7N-8026 Y | [1] | VALVE MECHANISM GROUP | ||
| 8N-4745 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 7N-9122 Y | [1] | ENGINE LIFTING GROUP | ||
| FRONT STRUCTURE | ||||
| 8N-0303 Y | [1] | FRONT HOUSING GROUP | ||
| 2P-6529 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 8N-0872 Y | [1] | FRONT HOUSING FASTENER GROUP | ||
| 1W-5634 Y | [1] | FRONT TIMING GEAR GROUP | ||
| 7N-9589 Y | [1] | TRUNNION GROUP | ||
| 4N-3238 Y | [1] | DAMPER GROUP | ||
| 8N-5585 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 2P-6166 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| SERIAL NO. 8Z18852 TO 8Z31078 INCLUSIVE | ||||
| 7W-9643 Y | [1] | HOUSING GROUP-FLYWHEEL | ||
| SERIAL NO. 8Z31079-UP | ||||
| 1P-9581 Y | [1] | FLYWHEEL GROUP | ||
| LOWER STRUCTURE | ||||
| 2P-9647 Y | [1] | OIL PAN GROUP | ||
| 2P-6200 Y | [1] | OIL PAN FASTENER GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680008
2W-4483: ENGINE AR
2W4483 ENGINE ARRANGEMENT-PART 2 OF 2
3306 ENGINE SERIAL NO. 8Z18852-UP. FOR FRENCH MARKET
3306 ENGINE SERIAL NO. 8Z18852-UP. FOR FRENCH MARKET
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 2P-6493 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| 2P-1784 Y | [1] | ENGINE OIL PUMP GROUP | ||
| 2P-6105 Y | [1] | ENGINE OIL LINES GROUP | ||
| 2P-6475 Y | [1] | OIL FILTER GROUP | ||
| SERIAL NO.8Z18852 TO 8Z24807 INCLUSIVE | ||||
| 2P-6855 Y | [1] | OIL FILLER GROUP | ||
| 1P-4244 Y | [1] | BREATHER GROUP | ||
| COOLING SYSTEM | ||||
| 7N-6206 Y | [1] | WATER PUMP GROUP | ||
| 1N-4219 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO.8Z18852 TO 8Z24807 INCLUSIVE | ||||
| 2W-7060 Y | [1] | WATER LINES GROUP | ||
| SERIAL NO.8Z24808-UP | ||||
| 2P-6215 Y | [1] | ENGINE OIL COOLER GROUP | ||
| SERIAL NO.8Z18852 TO 8Z24807 INCLUSIVE | ||||
| 2W-5636 Y | [1] | FILTER BASE & ENGINE OIL COOLER GROUP | ||
| SERIAL NO.8Z24808-UP | ||||
| 2P-6508 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| SERIAL NO.8Z18852 TO 8Z24807-UP | ||||
| 2W-6780 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| SERIAL NO.8Z24808-UP | ||||
| INTAKE AND EXHAUST SYSTEM | ||||
| 2P-6572 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 6N-6031 Y | [1] | EXHAUST MANIFOLD FASTENER GROUP | ||
| 7N-9912 Y | [1] | AIR COMPRESSOR GROUP | ||
| S/N 8Z18852-8Z32187 | ||||
| 7W-8399 Y | [1] | COMPRESSOR GROUP | ||
| S/N 8Z32188-UP | ||||
| 7N-9919 Y | [1] | AIR COMPRESSOR LINES GROUP | ||
| S/N 8Z18852-8Z32187 | ||||
| 7W-8411 Y | [1] | LINES GP-COMPRESSOR | ||
| S/N 8Z32188-UP | ||||
| FUEL SYSTEM AND GOVERNOR | ||||
| 2W-6229 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| 2W-3282 Y | [1] | SECONDARY FILTER GROUP | ||
| 2W-4012 Y | [1] | DRAIN LINES GROUP | ||
| 1W-5374 Y | [1] | PRIMARY FUEL FILTER GROUP | ||
| 2W-5261 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 2W-4160 Y | [1] | FUEL TRANSFER PUMP & MOUNTING GROUP | ||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP12680009
7N-8016: CYLINDER BLOCK GP
7N8016 CYLINDER BLOCK GROUP*R
ENGINE SERIAL NO.8Z1 TO 8Z2961 INCLUSIVE
6N8124 BLOCK PARTS ARE SHOWN ON PAGE 9
ENGINE SERIAL NO.8Z1 TO 8Z2961 INCLUSIVE
6N8124 BLOCK PARTS ARE SHOWN ON PAGE 9
For full view, you need register
Parts for your 12G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-8124 Y | [1] | CYLINDER BLOCK GP | |
| 2. | 5S-6670 | [18] | SEAL-O-RING | |
| 3. | 2P-8889 | [6] | LINER-CYLINDER | |
| 4. | 3S-5496 | [1] | SEAL-O-RING | |
| 5. | 9L-5854 | [6] | BAND-FILLER | |
| 6. | 7N-7998 | [1] | PLATE-BLOCK | |
| 7. | 7N-7997 | [1] | GASKET-PLATE | |
| 8. | 5M-6214 | [1] | PLUG-PIPE | |
| 9. | 7H-3171 | [1] | PLUG-PIPE | |
| 10. | 5M-6213 | [4] | PLUG | |
| 11. | 8M-9307 | [1] | PLUG-DRAIN | |
| 6F-7062 | [1] | WASHER | ||
| 12. | 3J-5389 | [2] | PLUG | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
Engine News
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08
2001/01/08
Caterpillar Parts SIS Catalog 12G :
Truck sale:
86.058
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
