AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6G5500 FRONT FRAME GROUP SERIAL NO.61M8401-UP PART OF 6G6570 AND 6G6586 AUTOMATIC BLADE CONTROL ARRANGEMENTS LISTED ON PAGES 287A & 287B. AN ATTACHMENT 12G


FRAME AND BODY
FRAME GP
IMPLEMENTS
CIRCLE GP
FRAME AND BODY
PLATE GP

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M07711-12026 (MACHINE) POWERED BY 3306 ENGINE SEBP1268 12G 61M   (1973)

FRAME AND BODY

FRAME GP
FRONT FRAME GROUP
8D-7250 FRONT FRAME GROUP
FRAME GP-FRONT
6G-5350 FRAME GP-FRONT
FRAME GP-FRONT
6G-5350 FRAME GP-FRONT
FRAME GP-FRONT
6G-5350 FRAME GP-FRONT
FRONT FRAME GROUP
9D-2390 FRONT FRAME GROUP
FRAME GP-FRONT
6G-5500 FRAME GP-FRONT
 

#SEBP12680630
 

6G-5500: FRAME GP-FRONT

6G5500 FRONT FRAME GROUP
SERIAL NO.61M8401-UP
PART OF 6G6570 AND 6G6586 AUTOMATIC BLADE CONTROL ARRANGEMENTS LISTED
ON PAGES 287A & 287B. AN ATTACHMENT
c232822 SEBP1268
6G5500 FRAME GP-FRONT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-4311 [1] COVER  
2. 0S-0509 [6] BOLT  
  5M-2894 [6] LOSHER  
3. 9D-9206 [1] LEVEL  
4. 6D-3033 [2] SCREW  
5. 6D-6589 [1] BLOCK  
6. 5H-3182 [2] PIN  
7. 7B-3235 [2] BOLT  
  5P-8245 [2] WASHER  
8. 6D-6554 [1] COVER ASSEM.  
9. 6G-5497 [1] FRAME ASSEM.  
    (Includes)
10. 8F-9836 [1] LUG  
11. 9D-3807 [2] STOP  
12. 4D-9376 [3] BOSS  
13. 6D-6595 [1] PLATE  
14. 9D-6162 [1] PLATE  
15. 6J-0499 [6] LUG  
16. 2M-2835 [2] BLOCK  
17. 2G-0540 [1] BRACKET ASSEM.  
18. 1H-8942 [1] PLATE  
19. 9D-5659 [11] BOSS  
20. 8D-8879 [4] STUD  
21. 5F-7845 [3] BOSS  
 

#SEBP12680631
 

8D-5910: CIRCLE GP

8D5910 CIRCLE GROUP
SERIAL NO.61M7711 TO 61M9983 INCLUSIVE
6G2943 CIRCLE PARTS ARE SHOWN ON PAGE 193
c542913 SEBP1268
8D5910 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2943 CY [1] CIRCLE AS  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM(1.38IN)LONG  
  8F-4028 [2] SPACER 0.64CM(0.25IN)LONG  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD AS  
7. 6H-1717 [42] BOLT  
8. 9D-6638 [1] STRIP-WEAR  
9. 2G-8786 [1] BRACKET AS  
10. 8S-9092 [2] BOLT (5/8-11X2.25IN)  
  1A-8537 [2] BOLT (5/8-11X2.75IN)  
  4D-3704 [4] WASHER-HARD  
11. 9D-8285 C [1] CAP  
12. 8D-5863 [1] GUARD AS  
13. 5D-0134 [4] STRIP-WEAR  
14. 6D-5415 [10] PLATE  
15. 2G-3221 [6] SHIM 1.6MM(.062IN)THK  
  2G-3219 [4] SHIM .80MM(.031IN)THK  
16. 8D-5949 [1] BAR-SPREADER  
17. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] PIN-COTTER  
18. 7F-0482 [4] NUT-FULL  
19. 2G-8731 [1] BRACKET-RAIL (LH)  
  2G-8729 [1] BRACKET-RAIL (RH)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] LOCKNUT  
  0S-1822 [2] WASHER 6.35MM(0.25IN)THK  
  7D-1446 [2] WASHER 0.318MM(0.125IN)THK  
21. 6G-2947 [1] SHAFT  
22. 5D-6644 [10] SHIM .762MM(.029IN)THK  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12680632
 

8D-5910: CIRCLE GP

8D5910 CIRCLE GROUP
SERIAL NO.61M9984 TO 61M11143 INCLUSIVE & 61M11152
6G2943 CIRCLE PARTS ARE SHOWN ON PAGE 193
c308652 SEBP1268
8D5910 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2943 Y [1] CIRCLE ASSEM.  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM(1.38IN.)LONG  
  8F-4028 [2] SPACER .64CM(.25IN.)LONG  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 2.68CM(1.125IN.)LONG  
8. 9D-6638 [1] STRIP  
9. 2G-8786 [1] BRACKET ASSEM.  
10. 8S-9092 [2] BOLT 5.72CM(2.25IN.)LONG  
  1A-8537 [2] BOLT 6.99CM(2.75IN.)LONG  
  4D-3704 [4] WASHER  
11. 9D-8285 [1] CAP  
12. 8D-5863 [1] GUARD ASSEM.  
13. 5D-0134 [4] STRIP  
14. 6D-5415 [10] PLATE  
15. 2G-3221 [6] SHIM 1.52MM(.060IN.)THK  
  2G-3219 [4] SHIM .762MM(.030IN.)THK  
16. 8D-5949 [1] BAR  
17. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] COTTER PIN  
18. 7F-0482 [4] NUT  
19. 6G-9427 C [1] BRACKET (L.H.)  
  6G-9426 C [1] BRACKET (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] NUT  
  0S-1822 [2] WASHER 6.35MM(.25IN.)THK  
  7D-1446 [2] WASHER .318MM(.125IN.)THK  
21. 6G-2947 [1] SHAFT  
22. 5D-6644 [10] SHIM  
23. 2K-0419 CB [4] WASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP12680633
 

8D-5910: CIRCLE GP

8D5910 CIRCLE GP
S/N 61M11144-11151, 61M11153-11891 & 11945-11955
6G2943-PAGE 193
c347260 SEBP1268
8D5910 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  5M-2894 C [2] WASHER  
2. 6G-2943 Y [1] CIRCLE AS  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM(1.38IN.)LG.  
  8F-4028 [2] SPACER .64CM(.25IN.)LG.  
4. 5P-8245 C [34] WASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD AS  
7. 6H-1717 C [32] BOLT 2.68CM(1.125IN.)LG.  
8. 5T-8367 C [1] STRIP-WEAR  
9. 8W-1751 C [1] BRACKET AS  
10. 8S-9092 [2] BOLT 5.72CM(2.25IN.)LG.  
  1A-8537 [2] BOLT 6.99CM(2.75IN.)LG.  
  5P-8247 C [4] WASHER-HARD  
11. 9D-8285 [1] CAP  
12. 8D-5863 [1] GUARD AS  
13. 5T-8366 C [4] STRIP-WEAR  
14. 8W-1749 C [10] PLATE  
15. 2G-3221 CB [5] SHIM 1.6MM(.062IN)THK 1.52MM(.060IN.)THK  
  2G-3219 CB [5] SHIM .80MM(.031IN)THK .762MM(.030IN.)THK  
16. 8D-5949 [1] BAR-SPREADER  
17. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] PIN-COTTER  
18. 7F-0482 [4] NUT-FULL  
19. 8W-1756 C [1] BRACKET-RAIL (L.H.)  
  8W-1755 C [1] BRACKET-RAIL (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] NUT  
  0S-1822 [2] WASHER 6.35MM(.25IN.)THK  
  7D-1446 [2] WASHER .318MM(.125IN.)THK  
21. 6G-2947 [1] SHAFT  
22. 5D-6644 [10] SHIM .762MM(.029IN)THK  
23. 2K-0419 CB [4] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12680634
 

8D-5910: CIRCLE GP

8D5910 CIRCLE GP
S/N 61M11892-11944 & 11956-UP
6G2943-PAGE 193
c402690 SEBP1268
8D5910 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  8T-4896 C [2] WASHER-HARD  
2. 6G-2943 Y [1] CIRCLE AS  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM(1.38IN.)LG  
  8F-4028 [2] SPACER .64CM(.25IN.)LG  
4. 5P-8245 [34] WASHER (SMALL)  
5. 4B-5273 [6] WASHER (LARGE)  
6. 8D-5862 [1] GUARD AS  
7. 6H-1717 [32] BOLT 2.68CM(1.13IN.)LG  
8. 5T-8367 [1] STRIP-WEAR  
9. 8W-1751 [1] BRACKET AS  
10. 8S-9092 [2] BOLT 5.72CM(2.25IN)LG  
  1A-8537 [2] BOLT 6.99CM(2.75IN)LG  
  5P-8247 [4] WASHER-HARD  
11. 9D-8285 [1] CAP  
12. 8D-5863 [1] GUARD AS  
13. 5T-8366 [4] STRIP-WEAR  
14. 8W-1749 [10] PLATE  
15. 2G-3221 B [5] SHIM 1.6MM(.062IN)THK 1.52MM(.060IN.)THK  
  2G-3219 B [5] SHIM .80MM(.031IN)THK .762MM(.030IN.)THK  
16. 8D-5949 [1] BAR-SPREADER  
17. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] PIN-COTTER  
18. 7F-0482 [4] NUT-FULL  
19. 8W-4067 C [1] BRACKET-RAIL (L.H.)  
  8W-4066 C [1] BRACKET-RAIL (R.H.)  
20. 2K-0419 B [4] WASHER  
21. 6G-2947 [1] SHAFT  
22. 5D-6644 B [10] SHIM .762MM(.029IN)THK  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12680635
 

6G-2945: CIRCLE AS

6G2945 CIRCLE AND BEAM ASSEMBLY
PART OF 8D9735 AND 8D9740 BLADE CONTROL ARRANGEMENTS LISTED ON PAGES
287 & 288. 6G2943 CIRCLE PARTS ARE SHOWN ON PAGE 193. AN ATTACHMENT
c227542 SEBP1268
6G2945 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-2943 Y [1] CIRCLE AND BEAM ASSEM.  
    (Separate Illustration)
2. 6D-3983 [1] SUPPORT ASSEM.  
    (Includes)
  8D-4696 [3] SCREW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12680636
 

9D-2385: CIRCLE GP

9D2385 CIRCLE GROUP
PART OF 8D9735 AND 8D9740 BLADE CONTROL ARRANGEMENTS LISTED ON PAGES
287 & 288.6G2945 CIRCLE PARTS ARE SHOWN ON PAGE 191. AN ATTACHMENT
c228193 SEBP1268
9D2385 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-2945 CY [1] CIRCLE AND BEAM ASSEM.  
    (Separate Illustration)
2. 3P-1529 [1] LEVEL  
3. 6D-3994 [1] COVER  
4. 6D-6339 [1] BUSHING  
5. 6D-3982 [3] NUT  
6. 1A-8096 [3] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12680637
 

6G-2944: CIRCLE AS

6G2944 CIRCLE ASSEMBLY
SERIAL NO. 61M7711 TO 61M10323 INCLUSIVE
PART OF 6G2943 CIRCLE
c227752 SEBP1268
6G2944 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9659 [1] BEAM  
2. 8D-9883 [1] GUSSET  
3. 8D-9886 [1] BRACE  
4. 7B-5037 [2] LOCK  
5. 6G-2949 [1] BRACE  
6. 8D-3093 [2] SPACER  
  9D-2185 [2] SHIM .2540 mm(.010 in.) thick  
  9D-2186 [2] SHIM 1.270 mm(.050 in.) thick  
7. 4D-4375 [2] LUG  
8. 8D-9884 [1] GUSSET  
9. 8D-9882 [2] BLOCK  
10. 8D-9661 [1] BEAM  
11. 8D-9887 [1] BRACE  
  6G-3044 H [1] SEGMENT (circle gear) (7 teeth not shown service repair for worn or damaged teeth)  
  H   NOT PART OF 6G2944 CIRCLE ASSEMBLY
 

#SEBP12680638
 

6G-2944: CIRCLE AS

6G2944 CIRCLE ASSEMBLY
SERIAL NO. 61M10324-UP
PART OF 6G2943 CIRCLE
c345488 SEBP1268
6G2944 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2226 [1] BEAM-BLADE  
2. 8D-9883 [1] GUSSET  
3. 8D-9886 [1] BRACE  
4. 7B-5037 [2] LOCK-BOLT  
5. 6G-2949 [1] BRACE  
6. 5T-3890 [1] BRACE  
7. 4D-4375 [2] LUG  
8. 8D-9884 [1] GUSSET  
9. 8D-9882 [2] BLOCK-FILLER  
10. 8W-2227 [1] BEAM-BLADE  
11. 8D-9887 [1] BRACE  
12. 5T-3889 [1] BRACE  
   
  6G-3044 FA [1] SEGMENT-CIRCLE GEAR  
    (7 TEETH - SERVICE
    REPAIR FOR WORN OR
    DAMAGED TEETH)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
 

#SEBP12680639
 

9D-3600: PUSH PLATE GROUP

9D3600 PUSH PLATE GROUP
c228194 SEBP1268
9D3600 PUSH PLATE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-3482 [1] PUSH PLATE ASSEM.  
    (Includes)
2. 5J-7333 [2] HOOK  
3. 7F-5227 C [8] BOLT  
  1B-4331 [8] NUT  
  3B-4512 [8] LOCKWASHER  
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog 12G :

FRONT FRAME GROUP
9D-2390 FRONT FRAME GROUP
FRAME GP-FRONT
6G-5350 FRAME GP-FRONT
FRAME GP-FRONT
6G-5350 FRAME GP-FRONT
FRAME GP-FRONT
6G-5350 FRAME GP-FRONT
FRONT FRAME GROUP
8D-7250 FRONT FRAME GROUP
TOOL BOX GP
9D-2700 TOOL BOX GP
HITCH GP-ARTICULATED
8D-2370 HITCH GP-ARTICULATED
BATTERY BOX GP
2G-3380 BATTERY BOX GP
CIRCLE GP
8D-5910 CIRCLE GP
CIRCLE GP
8D-5910 CIRCLE GP
CIRCLE GP
8D-5910 CIRCLE GP
CIRCLE GP
8D-5910 CIRCLE GP
CIRCLE AS
6G-2945 CIRCLE AS
CIRCLE GP
9D-2385 CIRCLE GP
CIRCLE AS
6G-2944 CIRCLE AS
CIRCLE AS
6G-2944 CIRCLE AS

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.