AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D6505 POWER BLADE & TIP CIRCLE GROUP-TYPE 2 PART OF 2G6322 & 2G440 BLADE & TIP ARRANGEMENTS LISTED ON PAGE 290 6G2900 CIRCLE PARTS ARE SHOWN ON PAGE 195. AN ATTACHMENT 130G


IMPLEMENTS
CIRCLE GP
DRAWBAR GP
HYDRAULIC SYSTEM
DRIVE GP

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V01657-02058 (MACHINE) POWERED BY 3304 ENGINE SEBP1270 130G 74V   (1975)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
9D-3560 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE AS
6G-2900 CIRCLE AS
 

#SEBP12700470
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE & TIP CIRCLE GROUP-TYPE 2
PART OF 2G6322 & 2G440 BLADE & TIP ARRANGEMENTS LISTED ON PAGE 290
6G2900 CIRCLE PARTS ARE SHOWN ON PAGE 195. AN ATTACHMENT
c308712 SEBP1270
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2900 Y [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51 cm(1.38 in.) long  
  8F-4028 [2] SPACER .64 cm(.25 in.) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 2.86 cm(1.125 in.) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 2G-8786 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 5.72 cm(2.25 in.) long  
  1A-8537 [2] BOLT 6.99 cm(2.75 in.) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 6D-5415 [10] PLATE  
14. 8D-5949 [1] BAR  
15. 2G-3221 [5] SHIM .15 cm(.06 in.) thick  
16. 7F-0482 [4] NUT  
17. 3B-4647 [2] COTTER PIN  
18. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
19. 6G-9427 C [1] BRACKET (L.H.)  
  6G-9426 C [1] BRACKET (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] NUT  
  0S-1822 [2] WASHER .64 cm(.25 in.) thick  
  7D-1446 [2] WASHER .48 cm(.188 in.) thick  
21. 6G-2947 [1] SHAFT  
22. 2K-0419 CB [4] WASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP12700471
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP-TYPE 3
6G2900-PAGE 195
PART OF 2G6322 & 2G0440 POWER BLADE AND TIP
AN ATTACHMENT
c345742 SEBP1270
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  5M-2894 C [2] WASHER  
2. 6G-2900 Y [1] CIRCLE AS  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM(1.38IN)LG  
  8F-4028 [2] SPACER .64CM(.25IN)LG  
4. 5P-8245 C [34] WASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD AS  
7. 6H-1717 [32] BOLT 2.86CM(1.125IN)LG.  
8. 5T-8366 C [4] STRIP-WEAR (END)  
  5T-8367 C [1] STRIP-WEAR (CENTER)  
9. 8W-1751 C [1] BRACKET AS  
10. 8S-9092 [2] BOLT 5.72CM(2.25IN)LG  
  1A-8537 [2] BOLT 6.99CM(2.75IN)LG  
  5P-8247 [4] WASHER-HARD  
11. 5D-6644 [10] SHIM .762MM(.029IN)THK  
12. 8D-5863 [1] GUARD AS  
13. 8W-1749 C [10] PLATE  
14. 8D-5949 [1] BAR-SPREADER  
15. 2G-3221 [5] SHIM 1.6MM(.062IN)THK .15CM(.06IN.)THK.  
16. 7F-0482 [4] NUT-FULL  
17. 3B-4647 [2] PIN-COTTER  
18. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
19. 8W-1756 C [1] BRACKET-RAIL (L.H.)  
  8W-1755 C [1] BRACKET-RAIL (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] LOCKNUT  
  0S-1822 [2] WASHER .64CM(.25IN)THK  
  7D-1446 [2] WASHER .48CM(.188IN)THK  
21. 6G-2947 [1] SHAFT  
22. 2K-0419 B [4] WASHER  
23. 2G-3219 CB [5] SHIM .80MM(.031IN)THK .76MM(.03IN)THK  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12700472
 

6G-2900: CIRCLE AS

6G2900 CIRCLE ASSEMBLY
PART OF 9D6505 POWER BLADE AND TIP CIRCLE GROUP SHOWN ON PAGE 194
AN ATTACHMENT
c498231 SEBP1270
6G2900 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3971 [1] BRACKET AS  
2. 6G-2946 [2] STOP  
3. [1] CIRCLE  
4. 7B-5037 [2] LOCK-BOLT  
5. 6G-2949 [1] BRACE  
6. 4D-4375 [2] LUG  
7. 8W-2224 [1] BEAM-BLADE  
8. 8W-2225 [1] BEAM-BLADE  
9. 2G-3467 [1] BRACE  
10. [2] PLATE  
11. 2G-3466 [1] BRACE  
12. 9D-2504 [1] BRACE  
13. 9D-2506 [1] BRACE  
 

#SEBP12700473
 

9D-3405: DRAWBAR GP

9D3405 DRAWBAR GROUP
SERIAL NO. 74V1657 TO 74V1702,74V1704 AND 74V1715 INCLUSIVE
c225746 SEBP1270
9D3405 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2972 [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
  [2] BAR  
2. 6J-0499 [4] LUG  
3. 9F-2978 [2] NUT  
4. 8F-9836 [6] LUG  
5. 2G-6741 [8] PLATE  
6. 2G-2411 [3] BALLSTUD ASSEM.  
7. 2G-2858 [1] CAP  
8. 4D-3907 CH [4] SHIM .76 mm(.030 in.) thick  
  6D-3133 CH [6] SHIM .25 mm(.010 in.) thick  
9. 7D-5861 [1] ADAPTER  
10. 4J-8622 [4] BOLT  
  9H-1031 C [4] WASHER  
11. 2H-3764 C [2] BOLT  
12. 9D-3288 [1] BOLT (draft)  
13. 2G-7464 [3] INSERT  
14. 7D-8833 [1] NUT  
15. 5D-4165 [2] SHOE  
16. 3B-8489 [4] FITTING  
17. 1D-4616 C [7] BOLT  
18. 1K-6870 [7] LOCKNUT  
19. 2S-0115 C [7] WASHER (small)  
20. 3B-6753 [5] BOLT  
21. 7D-0083 H [8] SHIM .25 mm (.010 in.) thick  
  7D-0084 H [20] SHIM .76 mm (.030 in.) thick  
22. 7D-8598 H [16] SHIM .25 mm (.010 in.) thick  
  7D-8597 H [40] SHIM .76 mm (.030 in.) thick  
23. 6G-2408 C [2] SHOE  
24. 4B-3604 [4] SETSCREW  
  1D-5119 [4] NUT  
25. 5P-6652 C [12] WASHER (large)  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP12700474
 

9D-3405: DRAWBAR GP

9D3405 DRAWBAR GROUP
SERIAL NO. 74V1703 AND 74V1716 TO 74V1959 INCLUSIVE
c177824 SEBP1270
9D3405 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2972 [1] DRAWBAR AND YOKE ASSEM.  
    (Includes)
  [2] BAR  
2. 6J-0499 [4] LUG  
3. 9F-2978 [2] NUT  
4. 8F-9836 [6] LUG  
5. 2G-6741 [8] PLATE  
6. 2G-2411 [3] BALLSTUD ASSEM.  
7. 6G-5404 C [2] PLATE  
8. 4D-3907 B [4] SHIM .76 mm(.030 in.) thick  
  6D-3133 B [6] SHIM .25 mm(.010 in.) thick  
9. 7D-5861 [1] ADAPTER  
10. 4J-8622 [4] BOLT  
  9H-1031 [4] WASHER  
11. 2H-3764 [2] BOLT  
12. 9D-3288 [1] BOLT (draft)  
13. 2G-7464 [3] INSERT  
14. 7D-8833 [1] NUT  
15. 6G-5393 C [2] SHOE  
16. 3B-8489 [4] FITTING  
17. 1D-4616 [7] BOLT  
18. 1K-6870 [7] LOCKNUT  
19. 2S-0115 [7] WASHER (small)  
20. 3B-6753 [5] BOLT  
21. 7D-0083 B [8] SHIM .25 mm(.010 in.) thick  
  7D-0084 B [20] SHIM .76 mm (.030 in.) thick  
22. 7D-8598 B [16] SHIM .25 mm (.010 in.) thick  
  7D-8597 B [40] SHIM .76 mm (.030 in.) thick  
23. 6G-2408 [2] SHOE  
24. 4B-3604 C [8] SETSCREW  
  1D-5119 C [8] NUT  
25. 5P-6652 [12] WASHER (large)  
26. 2G-2858 [1] CAP  
  C   INDICATES CHANGE
  B   USE AS REQUIRED
 

#SEBP12700475
 

6G-4880: DRAWBAR GP

6G4880 DRAWBAR GROUP
SERIAL NO. 74V1960-UP
c353098 SEBP1270
6G4880 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-4876 [1] DRAWBAR & YOKE AS  
2. 2G-2411 [3] BALLSTUD AS  
3. 6G-5442 [1] BALL  
4. 6G-1919 [1] CAP-PIVOT  
5. 4D-3907 B [4] SHIM .76MM(.030IN)THICK  
6. 6D-3133 B [6] SHIM .25MM(.010IN)THICK  
7. 6G-1664 [1] ADAPTER  
8. 5P-8291 [5] BOLT  
9. 2H-3764 [2] BOLT  
10. 4J-8622 [4] BOLT  
11. 9H-1031 [4] WASHER-HARD  
12. 3B-8489 [1] FITTING-GREASE  
13. 6G-1914 B [28] SHIM .76MM(.030IN)THICK  
14. 6G-1915 B [24] SHIM .25MM(.010IN)THICK  
15. 4B-3604 [8] SETSCREW-SQUARE HEAD  
16. 1D-5119 [8] NUT  
17. 6G-4526 [4] SHOE-CIRCLE GUIDE  
18. 3B-6753 [4] BOLT  
19. 5P-6652 C [12] WASHER  
20. 6G-4524 [8] STRIP-WEAR  
21. 6G-4525 [4] STRIP-WEAR  
22. 1D-4616 C [8] BOLT 152.4M(6IN)LG  
    -OR-
  3B-6753 C [8] BOLT 120.7M(4.75IN)LG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12700476
 

8D-5400: DRAWBAR GP

8D5400 DRAWBAR GROUP-REPLACED BY 6G1932 SHOWN ON PAGE 197B
NOTE: PROVIDES A DRAWBAR WITH MOUNTING FOR A HYDRAULIC CIRCLE DRIVE
AND DRAFT BEAMS WITHOUT HORIZONTAL OFFSET AN ATTACHMENT
c302993 SEBP1270
8D5400 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4616 C [12] BOLT  
2. 2S-0115 C [12] WASHER (small)  
3. 1K-6870 C [12] NUT  
4. 3B-6753 C [6] BOLT  
5. 7D-8833 [1] NUT  
6. 2G-2858 [1] CAP  
7. 6D-3133 [6] SHIM .254mm(.010 in.)thick  
  4D-3907 [4] SHIM .762 mm(.030 in.)thick  
8. 4J-8622 [4] BOLT  
  9H-1031 [4] WASHER  
9. 7D-5861 [1] ADAPTER  
10. 2H-3764 [2] BOLT  
11. 9D-3288 [1] BOLT  
  2G-7464 [3] INSERT  
12. 8D-5303 [1] DRAWBAR & YOKE ASSEM.  
    (Includes)
13. 6D-2354 [4] BOSS  
14. 9F-2978 [2] NUT (weld)  
15. 8F-9836 [6] LUG  
16. 2G-6741 [12] PLATE  
17. 2G-2411 [1] BALLSTUD ASSEM.  
18. 8D-4788 [1] CONNECTION  
19. 6G-5404 C [2] PLATE  
20. 6G-5393 C [2] SHOE  
21. 3B-8489 [6] FITTING  
22. 7D-8597 H [80] SHIM .762 mm(.030 in.)thick  
  7D-8598 H [32] SHIM .254 mm(.010 in.)thick  
23. 7D-0083 H [8] SHIM .254 mm(.010 in.)thick  
  7D-0084 H [20] SHIM .762 mm(.030 in.)thick  
24. 6G-2408 [4] SHOE  
25. 4B-3604 C [12] SET SCREW  
  1D-5119 C [12] NUT  
26. 5P-6652 [18] WASHER (large)  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP12700477
 

6G-1932: DRAWBAR GP

6G1932 DRAWBAR GROUP
AN ATTACHMENT
c659672 SEBP1270
6G1932 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6753 [8] BOLT (3/4-10X4.75IN)  
2. 5P-6652 [18] WASHER  
3. 6G-5442 [1] BALL  
4. 6G-1919 [1] CAP-PIVOT  
5. 4D-3907 B [4] SHIM (.76MM(.03IN)THK)  
6. 6D-3133 B [6] SHIM (.25MM(.01IN)THK)  
7. 6G-1664 [1] ADAPTER  
8. 5P-8291 [5] BOLT  
9. 2H-3764 [2] BOLT  
10. 4J-8622 [4] BOLT (7/8-9X4.75IN)  
11. 9H-1031 [4] WASHER-HARD  
12. 3B-8489 [1] FITTING-GREASE  
13. 6G-4526 [6] SHOE-CIRCLE GUIDE  
14. 4B-3604 [12] SETSCREW-SQUARE HEAD  
15. 1D-5119 [12] NUT  
16. 6G-1914 B [54] SHIM (.76MM(.03IN)THK)  
17. 6G-1915 B [36] SHIM (.25MM(.01IN)THK)  
18. 6G-4524 [11] STRIP-WEAR  
19. 6G-4525 [6] STRIP-WEAR  
20. 3B-6753 C [10] BOLT (3/4-10X4.75IN)  
21. 110-5854 [1] DRAWBAR & YOKE AS  
22. 8F-9836 C [6] LUG  
23. 8X-7956 C [1] SHAFT AS  
24. 8X-9942 [3] BALLSTUD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12700478
 

8D-7470: DRIVE GP-CIRCLE

8D7470 DRIVE GP-CIRCLE-PART 1 OF 2
S/N 74V1657-1959
8J540-PAGE 201B
c164830 SEBP1270
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 CY [1] MOTOR GROUP  
    (Separate Illustration)
2. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
3. 1B-5174 [1] PLUG  
4. 9D-1142 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 C [12] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 7D-8983 [10] SHIM .13 mm(.005 in.) thick  
  7D-8984 [6] SHIM .18 mm(.007 in.) thick  
11. 4H-6996 C [1] PIN  
12. 9D-1491 C [1] COUPLING  
13. 2G-6695 C [1] BRACKET  
14. 1H-7339 C [1] SEAL  
15. 0S-1585 C [4] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12700479
 

8D-7470: DRIVE GP-CIRCLE

8D7470 DRIVE GP-CIRCLE-PART 2 OF 2
S/N 74V1657-1959
c227770 SEBP1270
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4719 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 8D-9812 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 4D-6578 [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  7M-2360 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 2S-0115 C [4] WASHER  
21. 4F-9653 [1] SEAL  
22. 6G-5051 C [1] PINION  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Caterpillar Parts SIS Catalog 130G :

CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-6375 CIRCLE GP
CIRCLE GP
9D-3560 CIRCLE GP
AXLE GP-FRONT
2G-8660 AXLE GP-FRONT
AXLE GP-FRONT
2G-8660 AXLE GP-FRONT
AXLE GP-FRONT
2G-8660 AXLE GP-FRONT
AXLE GP-FRONT
2G-8660 AXLE GP-FRONT
CIRCLE GP
9D-6505 CIRCLE GP
CIRCLE AS
6G-2900 CIRCLE AS
DRAWBAR GP
9D-3405 DRAWBAR GP
DRAWBAR GP
9D-3405 DRAWBAR GP
DRAWBAR GP
6G-4880 DRAWBAR GP
DRAWBAR GP
8D-5400 DRAWBAR GP
DRAWBAR GP
6G-1932 DRAWBAR GP
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.