AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9J1762 UNLOADING VALVE GROUP-TYPE 2 PART OF 4T3090 & 9J3469 VALVE GROUPS SHOWN ON PAGES 207B & 228 1U4661 LEVER PARTS ARE SHOWN ON PAGE 228A 130G


HYDRAULIC SYSTEM
VALVE GP-UNLOADING
VALVE GP-RELIEF
LEVER GP
LINES GP-HYDRAULIC
LINES GP-CYLINDER
VALVE GP
VALVE GP-CHECK & RELIEF

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V01657-02058 (MACHINE) POWERED BY 3304 ENGINE SEBP1270 130G 74V   (1975)

HYDRAULIC SYSTEM

VALVE GP-UNLOADING
VALVE GP-UNLOADING
9J-1762 VALVE GP-UNLOADING
VALVE GP-UNLOADING
9J-1762 VALVE GP-UNLOADING
 

#SEBP12700560
 

9J-1762: VALVE GP-UNLOADING

9J1762 UNLOADING VALVE GROUP-TYPE 2
PART OF 4T3090 & 9J3469 VALVE GROUPS SHOWN ON PAGES 207B & 228
1U4661 LEVER PARTS ARE SHOWN ON PAGE 228A
c302235 SEBP1270
9J1762 VALVE GP-UNLOADING Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2089 [1] WASHER  
2. 0S-1615 [2] BOLT  
  5P-0537 C [2] WASHER  
3. 1U-4661 CY [1] LEVER GROUP  
4. 3D-2824 [1] SEAL  
5. 9S-8008 [1] PLUG  
6. 9J-1761 [1] VALVE GROUP  
7. 2J-0075 [1] SPRING  
8. 8J-6114 [2] RETAINER  
9. 9S-8009 [1] PLUG  
10. 4K-1388 [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12700561
 

9J-6447: VALVE GP-RELIEF

9J6447 RELIEF VALVE GROUP
PART OF 9J3469 COMBINATION VALVE GROUP SHOWN ON PAGE 228
c336868 SEBP1270
9J6447 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-9334 [1] PLUG  
  7M-8485 [1] SEAL  
2. 1H-0337 [1] VALVE  
3. 9F-6705 [1] SPRING  
4. 8J-8753 [1] RETAINER  
5. 6K-3607 [1] CONNECTOR  
  2M-9780 [1] SEAL  
6. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL  
7. 4L-1468 [2] WASHER 1.52MM(.06IN.)THK.  
  8J-6709 [5] SHIM .254MM(.01IN.)THK.  
8. 8J-6710 [1] STOP  
9. 8J-6704 [1] SPRING  
10. 8J-6703 [1] SPRING  
11. 9S-8008 [3] PLUG  
  3D-2824 [3] SEAL  
12. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL  
13. 9J-6458 [1] VALVE GP.  
14. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL  
15. 9S-8004 C [1] PLUG  
  3J-1907 C [1] SEAL  
16. 3J-7473 [7] SHIM .127MM(.005IN.)THK.  
  3J-7470 [3] SHIM 1.22MM(.048IN.)THK.  
17. 2J-6089 [1] SPRING  
18. 8J-6752 [1] VALVE GP.  
19. 8J-0331 [1] VALVE  
20. 9S-8005 [2] PLUG  
  3K-0360 [2] SEAL  
21. 4J-8996 [1] SEAL  
22. 8J-6708 [1] SPACER  
23. 8J-6714 C [1] SPACER  
24. 8J-6707 [1] RETAINER  
  C   INDICATES CHANGE
 

#SEBP12700562
 

9J-2012: LEVER GP

9J2012 LEVER GROUP
PART OF 9J1762 UNLOADING VALVE & 8J5903, 8J5961, 8J5907, 8J5906, 8J5902
& 8J5908 CONTROL VALVES
c200251 SEBP1270
9J2012 LEVER GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-1616 [1] LEVER ASSEM.  
2. 8J-1621 [1] SCREW  
3. 8J-1622 [1] NUT  
4. 8J-1623 [1] BOOT  
5. 8J-1620 [2] BEARING  
6. 7F-8607 [1] SEAL  
  8J-6264 [1] RING  
7. 8J-1619 [1] HOUSING  
8. 3D-4245 [1] SEAL  
 

#SEBP12700563
 

8D-8590: LINES GP-HYDRAULIC

8D8590 HYDRAULIC ARTICULATION LINES GROUP-1 CIRCUIT
SERIAL NO. 74V1657 TO 74V1824 INCLUSIVE
8J9974 VALVE PARTS ARE SHOWN ON PAGE 211
c158102 SEBP1270
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 57 cm(22.4 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 C [6] WASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 32 cm(12.6 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [7] ELBOW  
10. 9D-5971 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 40 cm(15.8 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 [4] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5972 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 67 cm(26.4 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 79 cm(30.1 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 54cm(21.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#SEBP12700564
 

8D-8590: LINES GP-HYDRAULIC

8D8590 HYDRAULIC ARTICULATION LINES GROUP-1 CIRCUIT
SERIAL NO. 74V1825 TO 74V1907 INCLUSIVE
8J9974 VALVE PARTS ARE SHOWN ON PAGE 211
c300350 SEBP1270
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 C [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 97 cm(38.19 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 57 cm(22.4 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 C [6] LOCKWASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 32 cm(12.6 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [7] ELBOW  
10. 9D-5971 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 40 cm(15.8 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 [4] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5859 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 CH HOSE 72 cm(28.3 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 79 cm(30.1 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 54cm(21.26 in.)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETER
 

#SEBP12700565
 

8D-8590: LINES GP-HYDRAULIC

8D8590 HYDRAULIC ARTICULATION LINES GROUP-1 CIRCUIT
SERIAL NO. 74V1908-UP
8J9974 VALVE PARTS ARE SHOWN ON PAGE 211
c301127 SEBP1270
8D8590 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 [5] ELBOW  
2. 3K-0360 [16] SEAL  
3. 9D-6048 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 38.19 in.(97 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
4. 9D-5975 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 22.4 in. (57 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
5. 0T-0102 [1] BOLT  
6. 5P-1075 [6] LOCKWASHER  
7. 6D-4247 [1] CLIP  
8. 9D-5974 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 12.6 in. (32 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
9. 7D-9984 C [9] ELBOW  
10. 5T-2460 C [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 18.5 in. (47 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
11. 005-4362 C [2] ELBOW  
12. 8J-9974 Y [1] VALVE GROUP (check)  
    (Separate Illustration)
13. 9D-5859 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 28.3 in. (72 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
14. 8D-1691 [1] BLOCK  
15. 0L-1143 [5] BOLT  
16. 9D-5973 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 30.1 in. (79 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
17. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 21.26 in. (54 cm)  
  8S-6417 [2] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP12700566
 

8D-8600: LINES GP-HYDRAULIC

8D8600 HYDRAULIC LEANING WHEEL LINES GROUP
8J5913 VALVE PARTS ARE SHOWN ON PAGE 200
c227979 SEBP1270
8D8600 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8188 [4] CONNECTOR  
2. 3K-0360 [8] SEAL  
3. 9D-8488 C [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 167 in. (424 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
4. 6D-4247 C [1] CLIP  
5. 7D-9984 [3] ELBOW  
6. 0L-1143 C [1] BOLT  
7. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
8. 9D-5857 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-5943 CH HOSE 28.35 in. (72 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
9. 9D-5970 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  2P-5943 CH HOSE 30.31 in. (77 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
10. 3S-2093 C [1] STRAP  
11. 005-4362 [1] ELBOW  
12. 6K-4936 C [1] BOLT  
13. 5P-1075 C [4] WASHER 4mm(.157 in.) thick  
14. 0T-0573 C [2] BOLT  
  7K-4743 C [2] WASHER 6.35mm(.250 in.)thick  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP12700567
 

8D-2820: LINES GP-LIFT CYLINDER

8D2820 LIFT CYLINDER LINES GROUP
8J9974-PAGE 211, 8J9975-PAGE 234
c227777 SEBP1270
8D2820 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9088 [4] CONNECTOR  
2. 3K-0360 C [16] SEAL  
3. 9D-5984 [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 154 cm(60.63 in.)  
  1P-9919 [1] COUPLING ASSEM. (45degrees)  
  5P-2467 [1] COUPLING ASSEM. (90degrees)  
  4S-5414 [2] SLEEVE  
4. 005-4362 C [8] ELBOW  
5. 2G-9989 C [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 129 cm(50.80 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45degrees)  
  4S-5414 [2] SLEEVE  
6. 2G-5494 C [2] CLAMP  
7. 2H-9889 C [2] CAPSCREW  
8. 1D-4717 C [2] NUT  
9. 7D-9984 C [2] ELBOW  
10. 0L-1143 [6] BOLT  
11. 8J-9974 Y [1] VALVE GROUP (R.H. CHECK)  
  8J-9975 Y [1] VALVE GROUP (L.H. CHECK)  
    (Separate Illustration)
12. 5P-1075 C [6] WASHER  
13. 030-8188 C [2] CONNECTOR  
14. 3H-3244 C [2] SPACER  
15. 1S-0994 C [4] CLIP  
16. 4B-4278 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETER
 

#SEBP12700568
 

9J-4932: VALVE GP-CHECK

9J4932 CHECK VALVE GROUP-PILOT OPERATED
PART OF 9D8535 FRONT ATTACHMENT LINES GROUP SHOWN ON PAGE 235
AN ATTACHMENT
c207360 SEBP1270
9J4932 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4871 [2] BALL  
2. 8J-9979 [2] CHOKE  
3. 9J-0404 [2] PLUG  
4. 9J-0403 [2] SPRING  
5. 7J-9933 [2] SEAL  
6. 3D-2824 [2] SEAL  
7. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
8. 8J-5456 [2] ADAPTER  
9. 9J-9339 C [1] VALVE GROUP  
    (Includes)
10. [2] PISTON  
11. 9J-0405 [2] SEAT  
  C   INDICATES CHANGE
 

#SEBP12700569
 

8J-9975: VALVE GP-CHECK & RELIEF

8J9975 CHECK AND RELIEF VALVE GROUP
PART OF 8D2820, 8W0213 LIFT CYLINDER LINES AND 8D8650 RIPPER LINES
c228006 SEBP1270
8J9975 VALVE GP-CHECK & RELIEF Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0331 [1] VALVE  
2. 6J-8696 [1] SHIM 1.22 mm(.048 in.) thick  
  5J-6153 [4] SHIM 0.19 mm(.0076 in.) thick  
3. 2J-6089 [1] SPRING  
4. 3K-6116 C [4] WASHER  
5. 9J-4871 C [2] BALL  
6. 9J-0404 [2] PLUG  
  7J-9933 [2] SEAL  
7. 9J-0403 [2] SPRING  
8. 3K-0360 [1] SEAL  
9. 8J-5456 [2] ADAPTER  
  3D-2824 [2] SEAL  
10. 9J-8274 C [1] BODY ASSEM.  
    (Includes)
11. 9J-0405 [2] SEAT  
12. 9J-5768 [1] PISTON  
13. 8J-9979 [2] CHOKE  
14. 4J-5309 [1] SEAL  
15. 8J-9250 [1] PLUG  
  C   INDICATES CHANGE
 

Information:

Caterpillar Parts SIS Catalog 130G :

LEVER GP
1U-4661 LEVER GP
VALVE GP-COMBINATION
9J-3469 VALVE GP-COMBINATION
VALVE GP-UNLOADING
9J-1762 VALVE GP-UNLOADING
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
LINES GP-PUMP
8D-7900 LINES GP-PUMP
VALVE GP-RELIEF
9J-6447 VALVE GP-RELIEF
LEVER GP
9J-2012 LEVER GP
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8600 LINES GP-HYDRAULIC
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
VALVE GP-CHECK
9J-4932 VALVE GP-CHECK

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.