AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D0170 CIRCLE GP 2G9189-PAGE 189 120G MOTOR GRADER


IMPLEMENTS
CIRCLE GP

MOTOR GRADER 120G MOTOR GRADER 87V
 120G MOTOR GRADERS 87V05275-08359 (MACHINE) POWERED BY 3304 ENGINE SEBP1271 120G 87V   (1974)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
9D-0170 CIRCLE GP
CIRCLE GP
9D-2670 CIRCLE GP
CIRCLE GP
9D-2670 CIRCLE GP
CIRCLE GP
9D-2670 CIRCLE GP
 

#SEBP12710630
 

9D-0170: CIRCLE GP

9D0170 CIRCLE GP
2G9189-PAGE 189
c409907 SEBP1271
9D0170 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-9189 Y [1] CIRCLE AS  
2. 7B-2500 [2] RING-SNAP  
3. 7B-2504 [2] PIN  
4. 1D-4494 [2] LINK-BLADE TILT  
5. 7B-2505 [2] PIN  
6. 7B-2501 [2] RING-SNAP  
7. 0T-0603 [2] BOLT  
  1B-4208 [2] NUT-FULL  
  5P-8249 C [2] WASHER (SMALL)  
  0M-0393 [2] WASHER-NOTCHED  
  0S-1822 CB [2] WASHER (LARGE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710631
 

9D-2670: CIRCLE GP

9D2670 CIRCLE GROUP-REAR VIEW-TYPE 1
PART OF 2G6321 & 2G430 POWER BLADE ARRANGEMENTS LISTED ON PAGE 279
6G2941 CIRCLE PARTS ARE SHOWN ON PAGE 189. AN ATTACHMENT
c175926 SEBP1271
9D2670 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-1717 [32] BOLT  
2. 3B-4508 [34] LOCKWASHER  
3. 6D-5415 [8] PLATE  
4. 7D-7095 [1] BAR  
5. 7F-0482 [4] NUT  
6. 6G-2941 CY [1] CIRCLE ASSEM.  
    (Separate Illustration)
7. 1D-4642 [2] BOLT  
  8D-5467 [2] WASHER .719 in. (1.83 cm)thick  
  5D-5206 [2] WASHER .50 in.(1.27 cm) thick  
  6K-3632 [2] LOCKNUT  
8. 9S-1366 [2] BOLT  
  4B-5273 [4] WASHER  
  8F-4028 [2] SPACER  
9. 1H-7855 [2] SPACER  
10. 9D-3144 [1] BRACKET  
11. 8D-2451 [1] GUARD ASSEM.  
12. 5D-0134 [4] STRIP  
13. 2G-3221 [4] SHIM  
14. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] COTTER PIN  
15. 9D-3143 [1] BRACKET  
16. 6G-2947 C [1] SHAFT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710632
 

9D-2670: CIRCLE GP

9D2670 CIRCLE GROUP-REAR VIEW
TYPE 2
6G2941-PAGE 189. PART OF 2G6321 & 2G0430 POWER BLADES
AN ATTACHMENT
c308593 SEBP1271
9D2670 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-1717 [32] BOLT  
2. 3B-4508 [34] LOCKWASHER  
3. 6D-5415 [8] PLATE  
4. 7D-7095 [1] BAR-SPREADER  
5. 7F-0482 [4] NUT-FULL  
6. 6G-2941 Y [1] CIRCLE AS  
7. 1D-4642 [2] BOLT  
  8D-5467 [2] WASHER-NOTCHED .719IN.(1.83CM)THK  
  5D-5206 [2] WASHER-NOTCHED .50IN.(1.27CM)THK  
  6K-3632 [2] LOCKNUT  
8. 9S-1366 [2] BOLT  
  4B-5273 [4] WASHER  
  8F-4028 [2] SPACER  
9. 1H-7855 [2] SPACER  
10. 6G-9425 C [1] BRACKET-RAIL  
11. 8D-2451 [1] GUARD AS  
12. 5D-0134 [4] STRIP-WEAR  
13. 2G-3221 [4] SHIM 1.6MM(.062IN)THK  
14. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] PIN-COTTER  
15. 6G-9424 C [1] BRACKET-RAIL  
16. 6G-2947 [1] SHAFT  
17. 2K-0419 CB [4] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710633
 

9D-2670: CIRCLE GP

9D2670 CIRCLE GP-BLADE
TYPE 3
6G2941-PAGE 189
PART OF 2G6321 & 2G0430 POWER BLADES
AN ATTACHMENT
c457471 SEBP1271
9D2670 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-1717 C [24] BOLT  
2. 5P-8245 C [26] WASHER  
3. 8W-1749 C [8] PLATE  
4. 7D-7095 [1] BAR-SPREADER  
5. 7F-0482 [4] NUT-FULL  
6. 6G-2941 Y [1] CIRCLE AS  
7. 1D-4642 [2] BOLT  
  8D-5467 [2] WASHER-NOTCHED .719IN.(1.83CM)THK  
  5D-5206 [2] WASHER-NOTCHED .50IN.(1.27CM)THK  
  6K-3632 [2] LOCKNUT  
8. 0S-1595 C [2] BOLT  
  4B-5273 [2] WASHER  
9. 8W-5232 [2] BRACKET AS  
10. 8W-1753 C [1] BRACKET-RAIL  
11. 8W-5227 C [1] GUARD AS  
12. 5T-8366 C [4] STRIP-WEAR  
13. 2G-3221 B [4] SHIM 1.6MM(.062IN)THK  
14. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
  3B-4647 [2] PIN-COTTER  
15. 8W-1752 C [1] BRACKET-RAIL  
16. 6G-2947 [1] SHAFT  
17. 2K-0419 B [4] WASHER  
18. 2G-3219 CB [4] SHIM .80MM(.031IN)THK  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710634
 

9D-3210: CIRCLE GP

9D3210 CIRCLE GROUP-TYPE 1
6G2930-PAGE 190
PART OF 2G6316, 2G0460 POWER BLADE & TIP
AN ATTACHMENT
c175935 SEBP1271
9D3210 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2930 CY [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51 cm(1.38 in.)long  
  8F-4028 [2] SPACER .64 cm(.25 in.)long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT  
8. 8D-5949 [1] BAR  
9. 2G-8786 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 5.72 cm(2.25 in.)long  
  1A-8537 [2] BOLT 6.99 cm(2.75 in.)long  
  4D-3704 [4] WASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 5D-0134 [4] STRIP  
14. 9D-6638 [1] STRIP (center)  
15. 2G-3221 [5] SHIM  
16. 6D-5415 [10] PLATE  
17. 1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4647 [2] COTTER PIN  
18. 7F-0482 [4] NUT  
19. 2G-8731 [1] BRACKET (L.H.)  
  2G-8729 [1] BRACKET (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 C [2] NUT  
  0S-1822 [2] WASHER .64 cm(.25 in.)thick  
  7D-1446 [2] WASHER .48 cm(.188 in.)thick  
21. 6G-2947 C [1] SHAFT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710635
 

9D-3210: CIRCLE GP

9D3210 CIRCLE GROUP-TYPE 2
6G2930-PAGE 190
PART OF 2G6316, 2G0460 POWER BLADE & TIP
AN ATTACHMENT
c308594 SEBP1271
9D3210 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2930 CY [1] CIRCLE ASSEM.  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM (1.38 IN.) LONG  
  8F-4028 [2] SPACER .64CM (.25 IN.) LONG  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT  
8. 8D-5949 [1] BAR  
9. 2G-8786 [1] BRACKET ASSEM.  
10. 8S-9092 [2] BOLT 5.72CM (2.25 IN.) LONG  
  1A-8537 [2] BOLT 6.99CM (2.75 IN.) LONG  
  4D-3704 [4] WASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 5D-0134 [4] STRIP  
14. 9D-6638 [1] STRIP (CENTER)  
15. 2G-3221 [5] SHIM  
16. 6D-5415 [10] PLATE  
17. 1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4647 [2] COTTER PIN  
18. 7F-0482 [4] NUT  
19. 6G-9427 C [1] BRACKET (L.H.)  
  6G-9426 C [1] BRACKET (R.H.)  
20. 1D-4641 C [2] BOLT  
  6K-3632 C [2] NUT  
  0S-1822 C [2] WASHER .64CM (.25 IN.)THK  
  7D-1446 [2] WASHER .48CM (.188 IN.) THK.  
21. 6G-2947 C [1] SHAFT  
22. 2K-0419 C [4] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710636
 

9D-3210: CIRCLE GP

9D3210 CIRCLE GP
TYPE 3
6G2930-PAGE 190. PART OF 2G6316 & 2G0460 POWER BLADE & TIP
AN ATTACHMENT
c339058 SEBP1271
9D3210 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  5M-2894 C [2] WASHER  
2. 6G-2930 Y [1] CIRCLE ASSEM.  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51CM (1.38 IN.) LONG  
  8F-4028 [2] SPACER .64CM (.25 IN.) LONG  
4. 5P-8245 C [34] WASHER 2.55CM (1 IN.)O.D.  
5. 4B-5273 [6] WASHER 3.5CM (1.38 IN.) O.D.  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 C [32] BOLT  
8. 8D-5949 [1] BAR  
9. 8W-1751 C [1] BRACKET ASSEM.  
10. 8S-9092 [2] BOLT 5.72CM (2.25 IN.) LONG  
  1A-8537 [2] BOLT 6.99CM (2.75 IN.) LONG  
  5P-8247 [4] WASHER  
11. 9D-8285 [1] CAP  
12. 8D-5863 [1] GUARD ASSEM.  
13. 5T-8366 C [4] STRIP  
14. 5T-8367 C [1] STRIP (CENTER)  
15. 2G-3221 [5] SHIM  
16. 8W-1749 C [10] PLATE  
17. 1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4647 [2] COTTER PIN  
18. 7F-0482 [4] NUT  
19. 8W-1756 C [1] BRACKET (L.H.)  
  8W-1755 C [1] BRACKET (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] NUT  
  0S-1822 [2] WASHER .64CM (.25 IN.)THK.  
  7D-1446 [2] WASHER .48CM (.188 IN.) THK.  
21. 6G-2947 [1] SHAFT  
22. 2K-0419 B [4] WASHER  
23. 5D-6644 [10] SHIM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  B   USE AS REQUIRED
 

#SEBP12710637
 

9D-3210: CIRCLE GP

9D3210 CIRCLE GP-BLADE
TYPE 4
6G2930-PAGE 190
PART OF 2G6316 & 2G0460 POWER BLADE & TIPS
AN ATTACHMENT
c404094 SEBP1271
9D3210 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  8T-4896 C [2] WASHER-HARD  
2. 6G-2930 Y [1] CIRCLE AS  
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER (LONG)  
  8F-4028 [2] SPACER (SHORT)  
4. 5P-8245 [34] WASHER (SMALL)  
5. 4B-5273 [6] WASHER (LARGE)  
6. 8D-5862 [1] GUARD AS  
7. 6H-1717 [32] BOLT  
8. 8D-5949 [1] BAR-SPREADER  
9. 8W-1751 [1] BRACKET AS  
10. 8S-9092 [2] BOLT 5.7CM(2.25IN)  
  1A-8537 [2] BOLT 7.0CM(2.75IN)  
  5P-8247 [4] WASHER-HARD  
11. 9D-8285 [1] CAP  
12. 8D-5863 [1] GUARD AS  
13. 5T-8366 [4] STRIP-WEAR  
14. 5T-8367 [1] STRIP-WEAR (CENTER)  
15. 2G-3221 [5] SHIM 1.6MM(.062IN)THK  
16. 8W-1749 [10] PLATE  
17. 1D-0503 [2] WASHER  
  2B-2673 [2] NUT  
  3B-4647 [2] PIN-COTTER  
18. 7F-0482 [4] NUT-FULL  
19. 8W-4067 C [1] BRACKET-RAIL  
  8W-4066 C [1] BRACKET-RAIL  
20. 5D-6644 [10] SHIM .762MM(.029IN)THK  
21. 6G-2947 [1] SHAFT  
22. 2K-0419 B [4] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710638
 

6G-2941: CIRCLE AS

6G2941 CIRCLE AS
PART OF 9D2670 CIRCLE
AN ATTACHMENT
c355422 SEBP1271
6G2941 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-2949 [1] BRACE  
2. 4D-4375 [2] LUG  
3. 8W-2225 [1] BEAM-BLADE  
4. 8W-2224 [1] BEAM-BLADE  
5. 7B-5037 [2] LOCK-BOLT  
 

#SEBP12710639
 

2G-9189: CIRCLE AS

2G9189 CIRCLE AS
PART OF 9D0170 CIRCLE
c177092 SEBP1271
2G9189 CIRCLE AS Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-5801 [2] WASHER  
2. 8D-3093 [2] SPACER  
 

Information:

Caterpillar Parts SIS Catalog 120G :

FRAME GP-FRONT
6G-5365 FRAME GP-FRONT
FRAME GP-FRONT
6G-5365 FRAME GP-FRONT
FRAME GP-FRONT
6G-5365 FRAME GP-FRONT
FRONT FRAME GROUP
9D-2650 FRONT FRAME GROUP
HITCH GP-ARTICULATED
8D-9780 HITCH GP-ARTICULATED
BATTERY BOX GP
2G-4500 BATTERY BOX GP
BATTERY BOX GP
2G-4500 BATTERY BOX GP
GUARD GP-PLATFORM
5T-4445 GUARD GP-PLATFORM
CIRCLE GP
9D-2670 CIRCLE GP
CIRCLE GP
9D-2670 CIRCLE GP
CIRCLE GP
9D-2670 CIRCLE GP
CIRCLE GP
9D-3210 CIRCLE GP
CIRCLE GP
9D-3210 CIRCLE GP
CIRCLE GP
9D-3210 CIRCLE GP
CIRCLE GP
9D-3210 CIRCLE GP
CIRCLE AS
6G-2941 CIRCLE AS

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.