AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5T8142 AXLE GP-FRONT-PART 1 OF 2 S/N 87V7434-UP 7D8912-PAGE 193G 120G MOTOR GRADER


FRAME AND BODY
AXLE GP
LINK GP-STEERING
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
MOTOR GP
VALVE GP
DRIVE GP

MOTOR GRADER 120G MOTOR GRADER 87V
 120G MOTOR GRADERS 87V05275-08359 (MACHINE) POWERED BY 3304 ENGINE SEBP1271 120G 87V   (1974)

FRAME AND BODY

AXLE GP
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
5T-8142 AXLE GP-FRONT
5T-8142 AXLE GP-FRONT
 

#SEBP12710650
 

5T-8142: AXLE GP-FRONT

5T8142 AXLE GP-FRONT-PART 1 OF 2
S/N 87V7434-UP
7D8912-PAGE 193G
c404451 SEBP1271
5T8142 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5667 [2] RETAINER  
2. 2G-8616 [1] PIN  
3. 5P-8842 [10] SEAL-LIP TYPE  
4. 0S-1592 [2] BOLT  
  4D-3704 [2] WASHER-HARD  
5. 2G-8719 [1] AXLE AS-FRONT  
6. 2G-8661 [2] BEARING-SLEEVE  
7. 2G-8631 [4] BEARING-SLEEVE  
8. 1B-5174 [2] PLUG-PIPE  
9. 2G-5676 B [1] WASHER 1.52MM(.060IN)THK  
10. 0T-0065 [2] BOLT  
  2K-4973 [2] LOCKNUT  
11. 2G-8628 [1] PIN  
12. 2G-8685 [1] BAR AS-LEAN  
13. 2G-8624 [2] BEARING-SLEEVE  
14. 2G-8612 [1] PIN  
15. 2G-8687 [1] ARM AS-RH  
16. 2G-8737 [1] BEARING-SLEEVE  
    6.45CM(2.54IN)LG
  2G-8736 [1] BEARING-SLEEVE  
    6.05CM(2.38IN)LG
17. 2G-8681 [1] HOUSING-SPINDLE (RH)  
18. 2G-8769 [1] PIN  
19. 8D-2811 [2] WASHER  
  3B-4618 [2] COTTER  
20. 5P-1075 C [8] WASHER-HARD (SMALL)  
21. 7D-8912 Y [1] LINK GP-STEERING  
22. 3B-8489 [12] FITTING-GREASE  
23. 5S-7379 C [4] BOLT  
  2G-8768 [4] WASHER (LARGE)  
24. 2G-8633 [2] PIN  
25. 2G-5675 [2] WASHER 4.78MM(.188IN)THK  
26. 2G-8682 [1] HOUSING-SPINDLE (LH)  
27. 5S-7383 C [4] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710651
 

5T-8142: AXLE GP-FRONT

5T8142 AXLE GP-FRONT-PART 2 OF 2
S/N 87V7434-UP
c404452 SEBP1271
5T8142 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3866 [2] SHIM  
2. 9D-0052 [2] RETAINER  
3. 030-8535 [4] BOLT-SELF LOCKING  
4. 2G-8778 [4] SEAL  
  4L-9564 [4] SEAL-O-RING  
5. 5H-1504 [2] WASHER-HARD  
6. 5P-8081 [4] BOLT-SELF LOCKING  
7. 2G-8742 [2] WASHER-HARD  
8. 1B-4367 [2] BOLT  
  4K-0367 [2] NUT  
  4D-3704 [2] WASHER-HARD  
9. 4D-0925 [2] LOCK  
10. 5P-8888 [2] SEAL-LIP TYPE  
11. 9D-0055 [2] LOCK  
12. 2G-8688 [1] ARM AS-LH  
  2G-8737 [1] BEARING-SLEEVE  
13. 2G-8736 [1] BEARING-SLEEVE  
14. 1D-4608 [2] BOLT  
  2J-3506 [2] NUT-FULL  
  2S-0115 [2] WASHER-HARD  
15. 5T-0905 [2] COVER  
16. 2H-3928 [2] SEAL-O-RING  
17. 2P-8986 [2] CUP-ROLLER BEARING  
  2P-8987 [2] CONE-ROLLER BEARING  
18. 0L-1329 [6] BOLT  
19. 5T-8141 [2] SPINDLE-FRONT AXLE  
20. 2N-2138 [2] CUP-ROLLER BEARING  
  2N-2139 [2] CONE-ROLLER BEARING  
21. 2G-8764 [4] RETAINER  
  2G-8760 [4] RING-METAL SEAL  
22. 3S-0303 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  3S-0302 [2] RING-SEALING  
23. 2G-8664 [4] WASHER-THRUST (OUTER)  
  2G-8665 [2] WASHER-THRUST (INNER)  
24. 2G-8620 [4] PIN  
 

#SEBP12710652
 

7D-8912: LINK GP-STEERING

7D8912 LINK GP-STEERING
S/N 87V7631-UP
PART OF 5T8142 AXLE-FRONT
c332342 SEBP1271
7D8912 LINK GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-6524 [1] SOCKET AS  
2. 2F-8057 [1] NUT-SLOTTED  
3. 5D-6952 C [2] CLAMP  
4. 1B-4367 C [2] BOLT  
  3K-2889 C [2] LOCKNUT  
5. 9D-6521 [1] ROD  
6. 9D-6523 [1] SOCKET AS  
7. 2F-8057 [1] NUT-SLOTTED  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12710653
 

2G-3490: LINES GP-CIRCLE DRIVE MOTOR

2G3490 CIRCLE DRIVE MOTOR LINES GROUP
SERIAL NO. 87V5275 TO 87V5701 INCLUSIVE
8J5913 VALVE PARTS ARE SHOWN ON PAGE 195
c227975 SEBP1271
2G3490 LINES GP-CIRCLE DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-9984 C [2] ELBOW  
    - OR -
  030-7962 [2] ELBOW (swivel)  
  030-8188 [2] CONNECTOR  
2. 030-8188 [4] CONNECTOR  
3. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 151.97 in.(386 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
4. 3K-0360 [6] SEAL  
5. 030-8194 [2] CONNECTOR  
  2M-9780 [2] SEAL  
6. 4J-5468 [2] CLAMP  
7. 0L-1351 [2] BOLT  
8. 5P-1075 [7] WASHER (conical)  
9. 2G-3788 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 86.22 in.(219 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
10. 2G-2562 [1] CLAMP  
11. 2G-2563 [1] CLAMP  
12. 2G-2623 [2] PLATE  
13. 0L-1143 C [3] BOLT  
14. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
15. 0L-1143 [2] BOLT 63.5 mm(2.5 in.)long  
    - OR -
  0T-0573 C [2] BOLT 69.85 mm(2.75 in.)long  
  7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP12710654
 

2G-3490: LINES GP-CIRCLE DRIVE MOTOR

2G3490 CIRCEL DRIVE MOTOR LINES GROUP
SERIAL NO. 87V5702 TO 87V5725 INCLUSIVE
8J5913 VALVE PARTS ARE SHOWN ON PAGE 195
c301274 SEBP1271
2G3490 LINES GP-CIRCLE DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7962 [2] ELBOW (swivel)  
  030-8188 [2] CONNECTOR  
2. 030-8188 C [3] CONNECTOR  
3. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 151.97 in. (386 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
4. 3K-0360 [6] SEAL  
5. 030-8194 [2] CONNECTOR  
  2M-9780 [2] SEAL  
6. 4J-5468 [2] CLAMP  
7. 0L-1351 [2] BOLT  
8. 5P-1075 [7] WASHER (conical)  
9. 2G-3788 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 86.22 in.(219 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
10. 2G-2562 [1] CLAMP  
11. 2G-2563 [1] CLAMP  
12. 2G-2623 [2] PLATE  
13. 0L-1143 C [3] BOLT  
14. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
15. 0T-0573 C [2] BOLT 69.85mm(2.75 in.)long  
  7K-4743 C [2] WASHER  
16. 7D-9984 C [1] ELBOW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP12710655
 

2G-3490: LINES GP-CIRCLE DRIVE MOTOR

2G3490 CIRCLE DRIVE MOTOR LINES GROUP
SERIAL NO. 87V5726 TO 87V6588 INCLUSIVE
8J5913 VALVE PARTS ARE SHOWN ON PAGE 195
c301275 SEBP1271
2G3490 LINES GP-CIRCLE DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-9984 C [3] ELBOW  
2. 030-8188 [3] CONNECTOR  
3. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 151.97 in.(386 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
4. 3K-0360 [6] SEAL  
5. 030-8194 [2] CONNECTOR  
  2M-9780 [2] SEAL  
6. 4J-5468 [2] CLAMP  
7. 0L-1351 [2] BOLT  
8. 5P-1075 [7] WASHER (conical)  
9. 2G-3788 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 CH HOSE 86.22 in.(219 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
10. 2G-2562 [1] CLAMP  
11. 2G-2563 [1] CLAMP  
12. 2G-2623 [2] PLATE  
13. 0L-1143 C [3] BOLT  
14. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
15. 0T-0573 C [2] BOLT 69.85mm(2.75 in.)long  
  7K-4743 C [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP12710656
 

2G-3490: LINES GP-CIRCLE DRIVE MOTOR

2G3490 CIRCLE DRIVE MOTOR LINES GROUP
SERIAL NO. 87V6589-UP
8J5913 VALVE PARTS ARE SHOWN ON PAGE 195
c304713 SEBP1271
2G3490 LINES GP-CIRCLE DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-9984 C [3] ELBOW  
2. 030-8188 [3] CONNECTOR  
3. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 151.97 in.(386 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
4. 3K-0360 [6] SEAL  
5. 030-8194 [2] CONNECTOR  
  2M-9780 [2] SEAL  
6. 5D-4988 C [2] CLAMP  
7. 0L-1351 [2] BOLT  
8. 5P-1075 [7] WASHER (conical)  
9. 2G-3788 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 86.22 in.(219 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
10. 2G-2562 [1] CLAMP  
11. 2G-2563 [1] CLAMP  
12. 2G-2623 [2] PLATE  
13. 0L-1143 [3] BOLT  
14. 8J-5913 Y [1] CHECK VALVE GROUP  
15. 0T-0573 [2] BOLT 69.85mm(2.75 in.)long  
  7K-4743 [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP12710657
 

8J-5407: MOTOR GP-GEROTOR

8J5407 MOTOR GP-GEROTER
PART OF 2G7830 & 6G7130 DRIVES-CIRCLE
c414445 SEBP1271
8J5407 MOTOR GP-GEROTOR Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3711 [1] COUPLING-SHAFT  
2. 9J-4957 [1] SEAL  
3. 5P-7604 [1] RING-RETAINING  
4. 9J-4965 [1] SPACER  
5. 9J-4975 [1] WASHER  
6. 3G-3719 [1] SEAL  
7. 3G-9793 C [2] RING  
8. 3G-3724 [1] SLEEVE  
9. 3G-3715 [1] ROTOR  
10. 3G-3712 [1] MANIFOLD  
11. 9J-4963 [1] RING  
12. 0T-0513 [7] BOLT  
13. 3G-3720 [1] COVER  
14. 9J-7231 [1] PLATE AS  
15. 3G-3725 [1] PLATE  
16. 3G-3714 [1] PLATE  
17. 5P-3243 [1] BEARING-THRUST  
18. 9J-4971 [1] HOUSING AS  
19. 5P-3242 [1] BEARING-ROLLER  
20. 5P-3244 [2] RACE-BEARING-THRUST  
21. 5P-3240 [1] BEARING-THRUST  
22. 5P-3241 [1] BEARING-ROLLER  
23. 3G-3702 [1] LINK-DRIVE  
24. 9T-3791 C [2] RING-BACK-UP  
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  3G-9794 C [1] KIT-SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12710658
 

8J-5913: VALVE GP-CHECK

8J5913 VALVE GP
PILOT OPERATED CHECK
PART OF 2G3490 LINES-CIRCLE DRIVE MOTOR & 9D0860 LINES-LEANING WHEEL
c451583 SEBP1271
8J5913 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0404 [2] PLUG  
2. 7J-9933 C [2] SEAL-O-RING  
3. 9J-4871 [2] BALL  
4. 9J-0403 [2] SPRING  
5. 9T-6835 C [1] BODY AS  
6. 9J-5768 [1] PISTON  
7. [2] SEAT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12710659
 

2G-7830: DRIVE GP-CIRCLE

2G7830 DRIVE GP-CIRCLE-TOP VIEW-PART 1 OF 2
c406137 SEBP1271
2G7830 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-7339 [1] SEAL-O-RING  
2. 2H-9247 [1] SEAL-O-RING  
3. 1B-5174 [1] PLUG-PIPE  
4. 8D-5344 [1] GEAR-WORM (36 TEETH)  
5. 9D-1142 [1] WORM-CIRCLE DRIVE  
6. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER-HARD  
7. 5P-0885 [2] CONE-ROLLER BEARING  
  2J-6232 [2] CUP-BEARING  
8. 5F-5434 [1] VENT AS  
9. 1D-4609 [1] BOLT  
  7M-2360 [1] WASHER  
10. 4L-6454 C [4] BOLT  
  5D-0353 [2] BOLT-SELF LOCKING  
  8T-4896 C [6] WASHER-HARD  
11. 2B-7410 [1] PLUG-PIPE  
12. 9D-1492 [1] COVER  
  5H-4909 [1] SEAL-O-RING  
13. 4H-6996 [1] PIN-SPRING  
14. 9D-1491 [1] COUPLING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog 120G :

2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
AXLE GP-FRONT
2G-8870 AXLE GP-FRONT
DRAWBAR GP
2G-6810 DRAWBAR GP
DRAWBAR GP
2G-6810 DRAWBAR GP
5T-8142 AXLE GP-FRONT
LINK GP-STEERING
7D-8912 LINK GP-STEERING
LINES GP-CIRCLE DRIVE MOTOR
2G-3490 LINES GP-CIRCLE DRIVE MOTOR
LINES GP-CIRCLE DRIVE MOTOR
2G-3490 LINES GP-CIRCLE DRIVE MOTOR
LINES GP-CIRCLE DRIVE MOTOR
2G-3490 LINES GP-CIRCLE DRIVE MOTOR
LINES GP-CIRCLE DRIVE MOTOR
2G-3490 LINES GP-CIRCLE DRIVE MOTOR
MOTOR GP-GEROTOR
8J-5407 MOTOR GP-GEROTOR
VALVE GP-CHECK
8J-5913 VALVE GP-CHECK

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.