AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T3199 METERING PUMP GROUP SERIAL NO. 87V6500-UP PART OF 6G5405 STEERING CONTROL GROUP SHOWN ON PAGE 198A 120G


HYDRAULIC SYSTEM
PUMP GP-METERING
CYLINDER GP
LINES GP-STEERING

MOTOR GRADER 120G MOTOR GRADER 87V
 120G MOTOR GRADERS 87V05275-08359 (MACHINE) POWERED BY 3304 ENGINE SEBP1271 120G 87V   (1974)

HYDRAULIC SYSTEM

PUMP GP-METERING
PUMP GP-METERING
3G-3897 PUMP GP-METERING
PUMP GP-METERING
4T-3199 PUMP GP-METERING
 

#SEBP12710680
 

4T-3199: PUMP GP-METERING

4T3199 METERING PUMP GROUP
SERIAL NO. 87V6500-UP
PART OF 6G5405 STEERING CONTROL GROUP SHOWN ON PAGE 198A
c308900 SEBP1271
4T3199 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3197 [1] SHAFT  
2. 3G-6892 [1] BODY ASSEM.  
    (Includes)
3. 7J-8010 [6] SPRING  
4. 7J-8009 [1] PIN  
5. 3G-6906 [1] SCREW  
6. 1H-1023 [1] SEAL  
7. 3G-6907 [1] SEAT  
8. 5F-9144 [1] SEAL  
9. 6S-7827 [1] BALL  
10. 6S-7826 [1] RETAINER  
11. 065-1176 [1] SPACER  
12. 9J-5686 [3] SEAL  
13. 9J-4743 [7] BOLT  
14. 3G-6889 [1] CAP  
15. 3G-6890 [1] GEROTOR ASSEM.  
16. 3G-6905 [1] SPACER  
17. 7J-6839 [1] DRIVE  
18. 3G-6891 [2] RACE  
19. 5L-1100 [1] BEARING  
20. 7F-8267 [1] SEAL  
21. 9J-5442 [1] RING  
22. 9J-8076 [1] BUSHING  
23. 7J-6833 [1] SEAL  
24. 8F-5340 [1] SEAL  
25. 3G-2327 [1] HOUSING  
26. 9J-2928 [1] BEARING  
27. 9J-2935 [1] RING  
28. 065-1153 [1] RING  
 

#SEBP12710681
 

3G-8069: CYLINDER GP-STEERING

3G8069 CYLINDER GP-STEERING (CHANGE 0-1)-R.H.
64MM (2.50") BORE X 267MM (10.5") STROKE
PART OF 8D3310 STEERING CYLINDER & MOUNTING
c344953 SEBP1271
3G8069 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT-SELF LOCKING  
2. 8J-7415 [1] WASHER-HARD  
3. 8J-6212 [1] RING-WEAR  
4. 8J-6213 [1] SEAL AS  
5. 3G-8076 [1] PISTON  
6. 3G-8427 R [1] ROD AS  
7. 8J-6221 [1] HEAD  
8. 8F-6711 [1] SEAL-O-RING  
  030-3239 [1] RING-BACK-UP  
9. 6J-9733 [1] SEAL-RING  
10. 5J-8150 [1] SEAL-U-CUP  
11. 4J-8979 [1] SEAL-LIP TYPE  
12. 8J-6222 [1] CROWN  
13. 3G-8071 R [1] CYLINDER AS  
14. 6V-7723 [1] RING-RETAINING  
15. 005-8639 [1] BEARING-ALIGNING  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1397 [1] KIT-HYD CYLINDER SEAL  
    (INCLDS. RINGS & SEALS)
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12710682
 

3G-8070: CYLINDER GP-STEERING

3G8070 CYLINDER GP-STEERING (CHANGE 0-1)-L.H.
64MM (2.50") BORE X 267MM (10.5") STROKE
PART OF 8D3310 STEERING CYLINDER & MOUNTING
c344382 SEBP1271
3G8070 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT-SELF LOCKING  
2. 8J-7415 [1] WASHER-HARD  
3. 8J-6212 J [1] RING-WEAR  
4. 8J-6213 J [1] SEAL AS  
5. 3G-8076 [1] PISTON  
6. 3G-8427 R [1] ROD AS  
7. 8J-6221 [1] HEAD  
8. 8F-6711 J [1] SEAL-O-RING  
  030-3239 J [1] RING-BACK-UP  
9. 6J-9733 J [1] SEAL-RING  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 4J-8979 J [1] SEAL-LIP TYPE  
12. 8J-6222 [1] CROWN  
13. 3G-8072 R [1] CYLINDER AS-LH  
14. 6V-7723 C [1] RING-RETAINING  
15. 005-8639 [1] BEARING-ALIGNING  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1397 C [1] KIT-HYD CYLINDER SEAL (SEAL)  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12710683
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 1
SERIAL NO. 87V5275 TO 87V6245 INCLUSIVE
c174657 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3M-0496 [2] STUD  
  1D-4717 [2] NUT  
2. 5M-2894 C [4] WASHER  
3. 2B-0941 C [3] SPACER  
4. 9D-1209 [2] PLATE  
5. 6G-1714 [1] CLAMP  
6. 0S-1591 C [1] BOLT  
7. 9D-2673 [2] CONNECTOR  
8. 3K-0360 [7] SEAL  
9. 6G-1701 [1] HOSE ASSEM. (not serv.)  
    For service furnish:
  9S-0671 H HOSE 51.2 in. (130 cm)  
  3S-8606 [2] SLEEVE  
  9S-9727 [2] COUPLING ASSEM.  
10. 7K-1181 [3] STRAP  
11. 030-7948 [3] ELBOW  
12. 9D-5892 [1] HOSE ASSEM. (not serv.)  
    For service furnish:
  9S-0671 H HOSE 61.41 in. (156 cm)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
13. 6G-1752 [2] CLAMP  
14. 6K-4936 [14] BOLT  
15. 3F-1417 [9] WASHER  
16. 6G-1773 [2] HOSE ASSEM. (not serv.)  
    For service of each furnish:
  9S-0671 H HOSE 224 in. (570 cm)  
  3S-8606 [2] SLEEVE  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
17. 6G-0237 [1] SEAL  
18. 6G-1692 [4] CLAMP  
19. 0S-0509 [1] BOLT  
20. 6G-1754 [2] CLAMP  
21. 6G-0208 [1] BOOT  
22. 4S-1962 [3] CLIP  
23. 8M-0505 [2] CONNECTOR  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP12710684
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 2
SERIAL NO. 87V5275 TO 87V6245 INCLUSIVE
3G7448 VALVE PARTS ARE SHOWN ON PAGE 204
c228063 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0065 [6] BOLT  
2. 5P-1075 C [6] WASHER  
3. 3G-7448 Y [2] VALVE GROUP  
    (Separate Illustration)
4. 8D-9088 [2] CONNECTOR  
5. 3K-0360 [12] SEAL  
6. 6G-2979 [2] HOSE ASSEM. (not serv.)  
    For service of each furnish:
  9S-0671 H HOSE 11.4 in.(29 cm)  
  3S-8606 [2] SLEEVE  
  8S-6391 [2] COUPLING ASSEM. (90 degrees)  
7. 8M-0505 C [6] CONNECTOR  
8. 9D-2673 C [2] CONNECTOR  
9. 7K-1181 [2] STRAP  
10. 6G-1772 [2] HOSE ASSEM. (not serve)  
    For service of each furnish:
  9S-0671 H HOSE 27.2 in.(69 cm)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
11. 4S-1962 [2] CLIP  
12. 005-4362 [2] ELBOW  
13. 9D-6004 [2] HOSE ASSEM.  
    For service of each furnish:
  2P-5943 H HOSE 32.68 in.(83 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM.  
  8S-6393 [1] COUPLING ASSEM.  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP12710685
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 1
SERIAL NO. 87V6246 TO 87V6514 INCLUSIVE
c305134 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3M-0496 [2] STUD  
  1D-4717 [2] NUT  
2. 5M-2894 C [4] WASHER  
3. 2B-0941 C [3] SPACER  
4. 9D-1209 [2] PLATE  
5. 6G-1714 [1] CLAMP  
6. 0S-1591 C [1] BOLT  
7. 9D-2673 [2] CONNECTOR  
8. 3K-0360 [7] SEAL  
9. 6G-1701 [1] HOSE ASSEM. (not serv.)  
    For service furnish:
  9S-0671 H HOSE 51.2 in. (130 cm)  
  3S-8606 [2] SLEEVE  
  9S-9727 [2] COUPLING ASSEM.  
10. 7K-1181 [3] STRAP  
11. 030-7948 [3] ELBOW  
12. 9D-5892 [1] HOSE ASSEM. (not serv.)  
    For service furnish:
  9S-0671 H HOSE 61.41 in. (156 cm)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
13. 6G-1752 [2] CLAMP  
14. 6K-4936 [14] BOLT  
15. 3F-1417 [9] WASHER  
16. 6G-1697 C [2] HOSE ASSEM. (not serv.)  
    For service of each furnish:
  9S-0671 H HOSE 224 in. (570 cm)  
  3S-8606 [2] SLEEVE  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
17. 6G-0237 [1] SEAL  
18. 6G-1692 [4] CLAMP  
19. 0S-0509 [1] BOLT  
20. 6G-1754 [2] CLAMP  
21. 6G-0208 [1] BOOT  
22. 4S-1962 [3] CLIP  
23. 8M-0505 [2] CONNECTOR  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#SEBP12710686
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 2
SERIAL NO. 87V6246 TO 87V6514 INCLUSIVE
3G7448 VALVE PARTS ARE SHOWN ON PAGE 204
c228063 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0065 [6] BOLT  
2. 5P-1075 C [6] WASHER  
3. 3G-7448 Y [2] VALVE GROUP  
    (Separate Illustration)
4. 8D-9088 [2] CONNECTOR  
5. 3K-0360 [12] SEAL  
6. 6G-2979 [2] HOSE ASSEM. (not serv.)  
    For service of each furnish:
  9S-0671 H HOSE 11.4 in.(29 cm)  
  3S-8606 [2] SLEEVE  
  8S-6391 [2] COUPLING ASSEM. (90 degrees)  
7. 8M-0505 C [6] CONNECTOR  
8. 9D-2673 C [2] CONNECTOR  
9. 7K-1181 [2] STRAP  
10. 6G-1772 [2] HOSE ASSEM. (not serve)  
    For service of each furnish:
  9S-0671 H HOSE 27.2 in.(69 cm)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
11. 4S-1962 [2] CLIP  
12. 005-4362 [2] ELBOW  
13. 9D-6004 [2] HOSE ASSEM.  
    For service of each furnish:
  2P-5943 H HOSE 32.68 in.(83 cm)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM.  
  8S-6393 [1] COUPLING ASSEM.  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP12710687
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 1
SERIAL NO. 87V6515 TO 87V6547 INCLUSIVE
c308645 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3M-0496 [2] STUD-TAPERLOCK  
  1D-4717 [2] NUT  
2. 5M-2894 [4] WASHER  
3. 2B-0941 [3] SPACER  
4. 9D-1209 [2] PLATE  
5. 6G-1714 [1] CLAMP  
6. 0S-1591 [1] BOLT  
7. 9D-2673 [2] CONNECTOR-PORT  
8. 3K-0360 [7] SEAL-O-RING  
9. 6G-1701 [1] HOSE AS (NOT SERV.)  
    FOR SERVICE FURNISH:
  9S-0671 G HOSE 51.2IN.(130CM)  
  3S-8606 [2] SLEEVE  
  9S-9727 [2] COUPLING AS  
10. 7K-1181 [3] STRAP-CABLE  
11. 030-7948 [3] ELBOW  
12. 9D-5892 [1] HOSE AS (NOT SERV.)  
    FOR SERVICE FURNISH:
  9S-0671 G HOSE 61.41IN.(156CM)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING AS (STRAIGHT)  
  9S-9727 [1] COUPLING AS (45)  
13. 6G-1752 [2] CLAMP  
14. 6K-4936 [14] BOLT-SELF LOCKING  
15. 3F-1417 [9] WASHER  
16. 6G-1697 C [2] HOSE AS (NOT SERV.)  
    FOR SERVICE OF EACH FURNISH
  9S-0671 G HOSE 224IN.(570CM)  
  3S-8606 [2] SLEEVE  
  9S-9727 [1] COUPLING AS (45)  
  8S-4055 [1] COUPLING AS (STRAIGHT)  
18. 6G-1692 [4] CLAMP  
19. 0S-0509 [1] BOLT  
20. 6G-1754 [2] CLAMP  
21. 6G-0208 [1] BOOT  
22. 4S-1962 [3] CLIP  
23. 8M-0505 [2] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
 

#SEBP12710688
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 2
SERIAL NO. 87V6515 TO 87V6547 INCLUSIVE
3G7448 VALVE PARTS ARE SHOWN ON PAGE 204
c308646 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0065 [6] BOLT  
2. 5P-1075 [6] WASHER  
3. 3G-7448 Y [2] VALVE GROUP  
4. 8D-9088 [2] CONNECTOR  
5. 3K-0360 [12] SEAL  
6. 6G-2979 [2] HOSE ASSEM. (NOT SERV.)  
    FOR SERVICE OF EACH FURNISH:
  9S-0671 G HOSE 11.4IN.(29CM)  
  3S-8606 [2] SLEEVE  
  8S-6391 [2] COUPLING ASSEM. (90 DEGREES)  
7. 8M-0505 [6] CONNECTOR  
8. 9D-2673 [2] CONNECTOR  
9. 7K-1181 [2] STRAP  
10. 6G-1772 [2] HOSE ASSEM. (NOT SERV)  
    FOR SERVICE OF EACH FURNISH:
  9S-0671 G HOSE 27.2IN.(69CM)  
  8S-6391 [1] COUPLING ASSEM. (90 DEGREES)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (STRAIGHT)  
11. 4S-1962 [2] CLIP  
12. 005-4362 [2] ELBOW  
13. 9D-6004 [2] HOSE ASSEM.  
    FOR SERVICE OF EACH FURNISH:
  2P-5943 G HOSE 32.68IN.(83CM)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM.  
  8S-6393 [1] COUPLING ASSEM.  
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP12710689
 

2G-9045: LINES GP-STEERING

2G9045 STEERING LINES GROUP-PART 1 OF 2
SERIAL NO. 87V6548 TO 87V7630 INCLUSIVE
c308696 SEBP1271
2G9045 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3M-0496 [2] STUD-TAPERLOCK  
  1D-4717 [2] NUT  
2. 5P-1075 C [5] WASHER-HARD  
3. 2B-0941 C [2] SPACER  
4. 9D-0953 C [1] SPACER  
5. 8M-0505 [2] CONNECTOR  
6. 0S-1591 [1] BOLT  
7. 9D-2673 [2] CONNECTOR-PORT  
8. 3K-0360 [7] SEAL-O-RING  
9. 6G-1701 [1] HOSE AS (NOT SERV.)  
    FOR SERVICE FURNISH:
  9S-0671 G HOSE 51.2IN.(130CM)  
  3S-8606 [2] SLEEVE  
  9S-9727 [2] COUPLING AS  
10. 7K-1181 [3] STRAP-CABLE  
11. 030-7948 [3] ELBOW  
12. 9D-5892 [1] HOSE AS (NOT SERV.)  
    FOR SERVICE FURNISH:
  9S-0671 G HOSE 61.41IN.(156CM)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING AS (STRAIGHT)  
  9S-9727 [1] COUPLING AS (45)  
13. 6G-1752 [2] CLAMP  
14. 6K-4936 C [12] BOLT-SELF LOCKING  
15. 3F-1417 C [8] WASHER  
16. 6G-1697 [2] HOSE AS (NOT SERV.)  
    FOR SERVICE OF EACH FURNISH
  9S-0671 G HOSE 224IN.(570CM)  
  3S-8606 [2] SLEEVE  
  9S-9727 [1] COUPLING AS (45)  
  8S-4055 [1] COUPLING AS (STRAIGHT)  
17. 6G-0237 [1] SEAL  
18. 6G-1692 [4] CLAMP  
19. 0S-0509 C [2] BOLT  
20. 6G-1754 [2] CLAMP  
21. 6G-0208 [1] BOOT  
22. 4S-1962 C [4] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
 

Information:

Service Magazine
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27

Caterpillar Parts SIS Catalog 120G :

PUMP GP-METERING
3G-3897 PUMP GP-METERING
VALVE GP
9T-0886 VALVE GP
VALVE GP
9T-0885 VALVE GP
VALVE GP-RELIEF
4T-3087 VALVE GP-RELIEF
VALVE GP-COMBINATION
4T-3088 VALVE GP-COMBINATION
VALVE GP-CHECK
4T-5868 VALVE GP-CHECK
LINES GP-STEERING
8W-0080 LINES GP-STEERING
LINES GP-STEERING
8W-0080 LINES GP-STEERING
CYLINDER GP-STEERING
3G-8069 CYLINDER GP-STEERING
CYLINDER GP-STEERING
3G-8070 CYLINDER GP-STEERING
LINES GP-STEERING
2G-9045 LINES GP-STEERING
2G-9045 LINES GP-STEERING
LINES GP-STEERING
2G-9045 LINES GP-STEERING
2G-9045 LINES GP-STEERING
LINES GP-STEERING
2G-9045 LINES GP-STEERING
2G-9045 LINES GP-STEERING

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.