AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N1855 VALVE MECHANISM COVER GROUP SERIAL NO. 24Z1128-UP 3512 GEN SET ENGINE


BASIC ENGINE
VALVE MECHANISM GP
COUPLING GP
MOUNTING GP-ENGINE
COUPLING GP
MOUNTING GP-ENGINE
ENCLOSURES, GUARDS AND BASES
RAIL GP

GEN SET ENGINE 3512 GEN SET ENGINE 24Z
 3512 GENERATOR SET ENGINE 24Z00001-01316 SEBP1281 3512 24Z   (1981)

BASIC ENGINE

VALVE MECHANISM GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
 

#SEBP12810050
 

7N-1855: COVER GP-VALVE MECHANISM

7N1855 VALVE MECHANISM COVER GROUP
SERIAL NO. 24Z1128-UP
c333550 SEBP1281
7N1855 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-9579 [4] BOLT  
  9M-1974 C [4] WASHER  
2. 2W-8894 C [1] COVER  
3. 4W-1596 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12810051
 

8N-9570: MOUNTING GP-ENGINE FLEXIBLE

8N9570 ENGINE FLEXIBLE MOUNTING GROUP
PROVIDES A VIBRATION ISOLATOR FOR ELECTRIC SET EINGINES WITH GENERATOR
SET RAILS & RAIL MOUNTED RADIATOR. FOR USE WITH STATIONARY GENERATOR
SETS ONLY. AN ATTACHMENT
c229836 SEBP1281
8N9570 MOUNTING GP-ENGINE FLEXIBLE Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9970 [8] MOUNT AS  
  5P-7197 [8] WASHER  
 

#SEBP12810052
 

7N-1863: TRUNNION GP-ENGINE

7N1863 TRUNNION GROUP
AN ATTACHMENT
c588656 SEBP1281
7N1863 TRUNNION GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4734 C [16] BOLT (50.80MM LG)  
2. 5P-8246 C [16] WASHER-HARD  
3. 8N-1287 [1] SUPPORT-OUTER  
4. 5P-8245 [20] WASHER  
5. 1D-4566 [20] BOLT (88.90MM LG)  
6. 9X-7438 [1] MOUNT AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12810053
 

2W-6607: SUPPORT GP-ENGINE

2W6607 ENGINE SUPPORT GROUP-FRONT-TRUNNION
NOT FOR USE WITH JACKET WATER HEATER, SUMP PUMP, ENGINE SUPPORT RAILS,
FRONT CLUTCH, HYDRAULIC PUMP DRIVE MOUNTING. AN ATTACHMENT
c319999 SEBP1281
2W6607 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-5514 [1] SUPPORT AS-TRUNNION  
2. 2W-5508 [2] BEARING  
3. 2W-5507 [1] SUPPORT-TRUNNION  
4. 1D-4566 [20] BOLT  
  5P-8245 [20] WASHER  
 

#SEBP12810054
 

2W-1773: MOUNTING GP-ENGINE FLEXIBLE

2W1773 ENGINE FLEXIBLE MOUNTING GROUP
PROVIDES A VIBRATION ISOLATOR FOR MARINE GENERATOR SETS. AN ATTACHMENT
c302008 SEBP1281
2W1773 MOUNTING GP-ENGINE FLEXIBLE Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2180 [8] MOUNT ASSEM.  
  2H-3757 [16] BOLT  
  5P-8249 [16] WASHER  
 

#SEBP12810055
 

7W-7549: MOUNTING GP-ENGINE

7W7549 MOUNTING GP-ENGINE
FOR USE WITH SPRING ISOLATORS & DEEP ENGINE OIL PAN
AN ATTACHMENT
c352638 SEBP1281
7W7549 MOUNTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3757 [16] BOLT  
  5P-8249 [16] WASHER  
2. 7W-7547 [8] BLOCK  
 

#SEBP12810056
 

8N-9697: RAIL GP-ENGINE SUPPORT

8N9697 ENGINE SUPPORT RAILS GROUP
AN ATTACHMENT
c413165 SEBP1281
8N9697 RAIL GP-ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3168 [1] SUPPORT-ENGINE (L.H.)  
2. 1N-3169 [1] SUPPORT-ENGINE (R.H.)  
3. 1A-0075 [28] BOLT (16 THD. PER IN.)  
  1A-0458 C [28] BOLT (10 THD. PER IN.)  
4. 5P-8248 [28] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12810057
 

8N-9698: RAIL GP-ENGINE SUPPORT

8N9698 ENGINE SUPPORT RAIL GROUP-MARINE LEDGE
AN ATTACHMENT
c453421 SEBP1281
8N9698 RAIL GP-ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6665 [4] SCREW-SET  
  1B-4209 [4] NUT-FULL  
2. 1N-3228 [1] SUPPORT AS-LH  
3. 4D-0565 C [2] BLOCK  
4. 0S-1897 [32] BOLT 5.7CM(2.25IN)LG.N/F  
    -OR-
  2A-1538 C [32] BOLT 5.7CM(2.25IN)LG.N/C  
5. 5P-8248 C [32] WASHER-HARD  
6. 1N-3229 [1] SUPPORT AS-RH  
7. 4D-0565 C [2] BLOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12810058
 

7N-5752: RAIL GP-ENGINE SUPPORT

7N5752 ENGINE SUPPORT RAILS GROUP-RADIATOR & GENERATOR-TYPE 1
AN ATTACHMENT
c300500 SEBP1281
7N5752 RAIL GP-ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-5555 [1] SUPPORT ASSEM. (L.H.)  
2. 7N-5736 CH [8] SHIM 2.5 mm(.098 in.)  
  7N-5735 CH [16] SHIM .80 mm(.031 in.)  
3. 1A-0075 [60] BOLT  
  5P-8248 [60] WASHER  
4. 7N-5558 [1] SUPPORT ASSEM. (R.H.)  
5. 9F-8369 H [12] SHIM 2.6 mm(.1046 in.)  
  1H-1179 H [24] SHIM .76 mm(.0299 in.)  
6. 7N-5723 [4] BRACE ASSEM.  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP12810059
 

7N-5752: RAIL GP-ENGINE SUPPORT

7N5752 ENGINE SUPPORT RAILS GROUP-RADIATOR & GENERATOR-TYPE 2
AN ATTACHMENT
c316929 SEBP1281
7N5752 RAIL GP-ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-5555 [1] SUPPORT & RADIATOR AS (L.H.)  
2. 7N-5736 [8] SHIM 2.5MM(.098 IN.)THK  
  7N-5735 [16] SHIM .80MM(.031 IN.)THK  
3. 1A-0458 [60] BOLT (COARSE)  
  1A-0075 B [60] BOLT (FINE)  
  5P-8248 B [60] WASHER-HARD  
4. 7N-5558 C [1] SUPPORT & RADIATOR AS (R.H.)  
5. 9F-8369 J [12] SHIM 2.65MM(.104IN)THK 2.6MM(.1046 IN.)THK  
  1H-1179 [24] SHIM .76MM(.029IN)THK .76MM(.0299 IN.)THK  
6. 2W-4692 [4] BRACE AS-ENGINE SUPPORT (COARSE)  
  7N-5723 B [4] BRACE AS-ENGINE SUPPORT (FINE)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Changes To Valve Clearance Settings
1983/04/27
Crankshaft Positions For Injector Timing And Valve Clearance Settings
1983/11/30
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18
Check Cylinder Heads For Water Passage Plugs
1984/04/11
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Stronger Push Rod Used
1985/08/01
Valve Mechanism Groups Use New Lifter Assemblies
1985/08/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Stronger Cylinder Heads Used
1986/02/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Check Oil Drain Hole In 0R2671 or 0R2621 Remanufactured Cylinder Heads If Head Used With Breather
1986/11/01
Improved Injector Clamp Eliminates Interference With Bridge
1987/03/01
Material Changed In Exhaust and Inlet Valves
1987/05/01
Improvements To Prevent Oil Leakage At Cylinder Heads
1987/12/01
Silicone Water Seals Reinstated In Cylinder Heads
1988/08/01
New Rocker Arm Shaft Assembly and Bolts Used
1988/09/01
Improved Valve Lifter Assemblies; Better Insert Retention
1989/02/01
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, and New Cylinder Head Assemblies Groups With New Inlet Valve Seats
1990/03/01
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes
1990/06/01
Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability
1990/11/01
Be Sure To Check Inlet Valve Rotocoils After An Engine Overspeed{1109,1105}
1991/03/01
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/01
Taller Water Seals Used In Cylinder Head Groups
1992/08/01
Correct Identification Of Rocker Arm Assembly Components
1992/10/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Cylinder Head Bolt Tightening Procedure
1992/12/01
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt
1992/12/01
New Water Seals Used In Cylinder Head Groups; New Water Seal Assemblies And O-Ring Seals Used In Insert Kit
1993/02/01
Valve Seat Insert Removal Tools
1993/02/01
New Cylinder Head Gasket Used
1993/09/01
Non-Counterbored Valve Guides Used{1104}
1994/03/01
Intake And Exhaust Valve Lash Increased{1105}
1994/07/01
New Exhaust Valve With Tapered Stem Used In Engine Cylinder Head Groups{1105}
1995/09/01
New Lifters Improve Roller-To-Camshaft Contact And New Bridges Provide Commonality With 3500B Engines {1102,1121,1209}
1996/08/19
A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2003/09/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
2005/05/23
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3500 Industrial and Generator Set Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installation Of Service Cylinder Head Assembly{1101}
Installation Of Service Cylinder Head Assembly{1101}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Installation Of New Cylinder Port Thermocouples
Installation Of New Cylinder Port Thermocouples
Specifications
Valve Rocker Arms, Lifters, And Bridges
SUPPLEMENT FOR UPRATED 3500 ENGINES
Valve Mechanism
3500 Generator Set Engines
Valve Mechanism
3500 Generator Set Engines
Fuel Injector Mechanism
3500 Generator Set Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Remove All 8N6862 And 8N6863 Seals From Parts Stock
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3500 Engines
Valve Lash and Valve Bridge Adjustment
3500 Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Engines
Valve Lash Check
3500 Engines
Disassembly and Assembly
Valve Cover - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft and Push Rods - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Disassemble
3508, 3512 and 3516 Generator Set Engines
Rocker Shaft - Assemble
3508, 3512 and 3516 Generator Set Engines
Valve Cover Base - Remove and Install
3508, 3512 and 3516 Generator Set Engines
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Positions For Injector Timing And Valve Clearance Settings{0374,1104,1290}
1983/11/21
Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area{1209,1208,1210}
1983/12/05
Check Cylinder Heads For Water Passage Plugs{1100,0374}
1984/03/12
Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal {1107}
1985/01/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Mechanism Groups Use New Lifter Assemblies{1209}
1985/08/05
Stronger Push Rod Used{1208}
1985/08/05
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Checking Or Adjusting Valve Clearances{1105,1208,1123}
1986/01/13
Stronger Cylinder Heads Used{1100}
1986/01/27
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Beaded Cylinder Head Gasket Provides A Better Seal For Camshaft Compartment{1100}
1986/05/26
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Check Oil Drain Hole In OR2671 Or OR2621 Remanufactured Cylinder Heads If Head Used With Breather{1100,1300,1317}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Socket In Valve Rocker Arms Provides Lubrication For Inlet Valve Seats {1103,1105,1123}
1988/04/25
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Valve Lifter Assemblies; Better Insert Retention{1112}
1989/02/13
New Inlet/Exhaust Valve With Improved Valve Seat Angle, New Valve Guide, New Cylinder Head Assemblies With New Inlet Valve Seats {1100,1103,1104,1105}
1990/02/26
New Lifter Assembly Reduces Pitting And Spalling Of Camshaft Lobes{1209}
1990/06/04
Valve Lifters Can Be Removed Without Removing Cylinder Heads {1112}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Improved 7W7730 Cylinder Head Gasket Provides Better Sealing Capability{1124}
1990/10/29
New Rotocoil Used In Cylinder Head Group; New Valve Stem Oil Shield Used In Locomotive Engine Cylinder Head Group{1109,1100}
1991/03/11
Correct Identification Of Rocker Arm Assembly Components{1123}
1992/11/09
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
New Cylinder Head Bolt Tightening Procedure{1100}
1992/12/21
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Cylinder Head Gasket Used{1124}
1993/09/20
New Valve Cover Seals Are Used For Mechanical Unit Injector (MUI) And Electronic Unit Injector (EUI) Engines{1107}
1996/09/30
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3512 :

COVER GP-VALVE MECHANISM
7N-1855 COVER GP-VALVE MECHANISM
LIFTING GP
8N-7734 LIFTING GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
VALVE MECHANISM GP
7N-1858 VALVE MECHANISM GP
CYLINDER HEAD GP
7W-2233 CYLINDER HEAD GP
CYLINDER HEAD AS
4W-1900 CYLINDER HEAD AS
CYLINDER HEAD GP
2W-5802 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-7172 CYLINDER HEAD GP
MOUNTING GP-ENGINE FLEXIBLE
8N-9570 MOUNTING GP-ENGINE FLEXIBLE
TRUNNION GP-ENGINE
7N-1863 TRUNNION GP-ENGINE
SUPPORT GP-ENGINE
2W-6607 SUPPORT GP-ENGINE
MOUNTING GP-ENGINE FLEXIBLE
2W-1773 MOUNTING GP-ENGINE FLEXIBLE
MOUNTING GP-ENGINE
7W-7549 MOUNTING GP-ENGINE
RAIL GP-ENGINE SUPPORT
8N-9697 RAIL GP-ENGINE SUPPORT
RAIL GP-ENGINE SUPPORT
8N-9698 RAIL GP-ENGINE SUPPORT
RAIL GP-ENGINE SUPPORT
7N-5752 RAIL GP-ENGINE SUPPORT

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.