AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5N8942 HARNESS GP-WIRING-PART 3 OF 4 PART OF 5N9304 & 4W4750 WIRINGS AN ATTACHMENT 3512 GEN SET ENGINE


ELECTRICAL AND STARTING SYSTEM
WIRING GP
ENCLOSURE GP
WIRING GP
ENCLOSURE GP
WIRING GP

GEN SET ENGINE 3512 GEN SET ENGINE 24Z
 3512 GENERATOR SET ENGINE 24Z00001-01316 SEBP1281 3512 24Z   (1981)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
WIRING GP-GOVERNOR SOLENOID
5N-8572 WIRING GP-GOVERNOR SOLENOID
5N-0642 WIRING GP
 

#SEBP12810720
 

5N-8942: HARNESS GP-WIRING

5N8942 HARNESS GP-WIRING-PART 3 OF 4
PART OF 5N9304 & 4W4750 WIRINGS
AN ATTACHMENT
c355435 SEBP1281
5N8942 HARNESS GP-WIRING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-3059 [3] TERMINAL  
2. 5P-1475 [15] TERMINAL  
3. 5P-1477 [2] TERMINAL  
4. 3S-2093 [10] STRAP-CABLE  
5. 6V-5819 BD CONDUIT-FLEXIBLE  
6. 062-5388 [1] LOCKNUT  
7. 5N-9117 [1] ADAPTER  
8. 5N-9067 [8] COLLAR  
9. 5N-9072 [10] CLIP  
10. 6V-5817 BD CONDUIT-FLEXIBLE  
11. 5N-9068 [1] COLLAR  
12. 5N-9065 [3] TEE  
13. 7N-9737 [1] HOUSING-PLUG  
14. 9G-3695 B [1] PLUG-SEALING  
15. 7N-7782 [1] HOUSING-PLUG  
16. 2L-8050 [1] TERMINAL  
17. 1S-2244 [1] BOOT-CONDUIT  
18. 2L-8054 [1] TERMINAL  
19. 7N-7780 [2] PIN-CONNECTOR  
20. 7N-7779 [3] SOCKET  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP12810721
 

5N-8942: HARNESS GP-WIRING

5N8942 HARNESS GP-WIRING-PART 4 OF 4
PART OF 5N9304 & 4W4750 WIRINGS
AN ATTACHMENT
c355442 SEBP1281
5N8942 HARNESS GP-WIRING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5819 BD CONDUIT-FLEXIBLE  
2. 7N-7780 [5] PIN-CONNECTOR  
3. 7N-9737 [3] HOUSING-PLUG  
4. 9G-3695 [1] PLUG-SEALING  
5. 7N-7782 [2] HOUSING-PLUG  
6. 5P-6009 BD TUBE  
7. 9G-3695 B [1] PLUG-SEALING  
8. 7N-7779 [6] SOCKET  
9. 2L-8049 [2] TERMINAL  
10. 5N-9068 [5] COLLAR  
11. 6V-5817 BD CONDUIT-FLEXIBLE  
12. 5N-9065 [4] TEE  
13. 5N-9067 [7] COLLAR  
14. 5N-9072 [12] CLIP  
15. 7N-9017 B [2] TERMINAL  
16. 7N-7221 [1] TERMINAL  
17. 5P-4571 [2] TERMINAL  
  5N-9164 BF [14] PLUG (LARGE)  
  5N-9165 BF [1] PLUG (SMALL)  
    THE FOLLOWING WIRES
    ARE AVAILABLE:
  6V-2744 BE WIRE (18 GA)  
  6V-2369 BD WIRE (4 GA)  
  5P-5675 BD WIRE (6 GA)  
  5P-5622 BD WIRE (10 GA)  
  5P-5623 BD WIRE (16 GA)  
  5P-5624 BD WIRE (14 GA)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
 

#SEBP12810722
 

5N-8878: ENCLOSURE GP

5N8878 ENCLOSURE GROUP-TYPE 1
PART OF 5N9304, 5N9305 & 4W4750 ENGINE WIRINGS
AN ATTACHMENT
c314083 SEBP1281
5N8878 ENCLOSURE GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-5520 [4] SCREW-TAPPING  
2. 5N-6924 [1] COVER  
3. 8P-7065 [2] PLUG  
4. 5N-8998 [2] BOOT  
5. 5N-7509 [2] INSULATOR  
6. 5N-7508 [2] INSULATOR  
7. 5P-7751 [4] NUT-BRONZE  
8. 5N-7510 [2] STUD  
9. 3L-7314 [8] WASHER  
   
10. 6H-5431 [2] NUT-JAM BRASS  
11. 4F-8711 [1] PLUG  
12. 030-1193 [2] SCREW-MACHINE  
13. 5N-6925 [1] ENCLOSURE  
14. 6T-3646 [1] CRCT BREAKER AS (80 AMPS)  
  6V-8365 [2] SCREW-MACHINE  
  1H-3244 [4] LOCKWASHER  
15. 5N-8876 C [2] BRACKET  
16. 0S-1594 [2] BOLT  
  5M-2894 [4] WASHER  
  1D-4717 C [2] NUT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12810723
 

5N-8572: WIRING GP-GOVERNOR SOLENOID

5N8572 WIRING GROUP
PART OF 8N6481 & 8N6477 GOVERNORS
AN ATTACHMENT
c300536 SEBP1281
5N8572 WIRING GP-GOVERNOR SOLENOID Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-7490 [1] PLUG ASSEM.  
2. 5P-5624 H WIRE .15m(5.91 in.)  
3. 7N-9738 [1] HOUSING  
4. 7N-7779 [1] SOCKET  
5. 7N-7780 [1] PIN  
6. 5P-5624 H WIRE .15m(5.91 in.)  
  H   ORDER BY THE METER
 

#SEBP12810724
 

5N-8878: ENCLOSURE GP

5N8878 ENCLOSURE GROUP-TYPE 2
PART OF 5N9304, 5N9305 & 4W4750 ENGINE WIRINGS
AN ATTACHMENT
c335988 SEBP1281
5N8878 ENCLOSURE GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-5520 [4] SCREW-TAPPING  
2. 5N-6924 [1] COVER  
3. 8P-7065 [2] PLUG  
4. 5N-8998 [2] BOOT  
5. 7W-2710 C [2] INSULATOR  
6. 7W-2709 C [2] INSULATOR  
7. 5P-7751 [4] NUT-BRONZE  
8. 5N-7510 [2] STUD  
9. 3L-7314 [8] WASHER  
   
10. 6H-5431 [2] NUT-JAM BRASS  
11. 4F-8711 [1] PLUG  
12. 030-1193 [2] SCREW-MACHINE  
13. 5N-6925 [1] ENCLOSURE  
14. 6T-3646 [1] CRCT BREAKER AS (80 AMP)  
  6V-8365 [2] SCREW-MACHINE  
  1H-3244 [4] LOCKWASHER  
15. 5N-8876 [2] BRACKET  
16. 0S-1594 [2] BOLT  
  5M-2894 [4] WASHER  
  1D-4717 [2] NUT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12810725
 

5N-0642: WIRING GP

5N642 WIRING GP-ENGINE
PART OF 5N9304 WIRING
AN ATTACHMENT
SEBP12810725 SEBP1281
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  7N-7778 [1] HOUSING--PLUG  
  7N-9737 [6] HOUSING--PLUG  
  7N-7782 [3] HOUSING--PLUG  
  9G-3672 [1] HOUSING--PLUG  
  7N-7780 [12] PIN  
  7N-7779 [13] SOCKET  
  9G-3695 [2] PLUG  
  9G-9149 [1] CLIP-TO HOUSING  
  9G-9151 [5] CLIP-TO HOUSING  
  9G-9155 [1] CLIP-TO HOUSING  
  5P-1475 [15] TERMINAL-SPRING SPADE (14-16 #8 SCREW)  
  5P-1477 [2] TERMINAL-SPRING SPADE (10-12 #8 SCREW)  
  5P-3059 [6] TERMINAL-SPRING SPADE (18-22 #6 SCREW)  
  7N-9017 [2] TERMINAL--RING (18-22 #10 SCREW)  
  7N-7221 [1] TERMINAL--(18-22 BLADE)  
  9G-4336 [3] TERMINAL--RING (4 3/8 BOLT)  
  9G-4343 [1] TERMINAL--RING (4 1/4 BOLT)  
  9G-4344 [2] TERMINAL--RING (4 1/2 BOLT)  
  2L-8049 [2] TERMINAL--RING (6 NO. 10 SCREW)  
  2L-8050 [3] TERMINAL--RING (6 1/4 BOLT)  
  2P-8052 [1] TERMINAL--RING (6 3/8 BOLT)  
  2L-8065 [2] TERMINAL--RING (10-12 NO. 8 SCREW)  
  2L-8066 [2] TERMINAL--RING (10-12 NO.10 SCREW)  
  2L-8067 [5] TERMINAL--RING (10-12 1/4 BOLT)  
  2L-8068 [5] TERMINAL--RING (10-12 5/16 BOLT)  
  2L-8069 [2] TERMINAL--RING (10-12 3/8 BOLT)  
  2L-8075 [6] TERMIANL--RING (14-16 NO. 5 SCREW)  
  2L-8077 [3] TERMINAL--RING (14-16 1/4 BOLT)  
  2L-8078 [1] TERMINAL--RING (14-16 5/16 BOLT)  
  [5] TERMINAL--RING (14-16 3/8 BOLT)  
  3S-2093 [22] STRAP--CABLE  
  8L-8413 [100] STRAP--CABLE  
  3N-5681 [3] TIE--CABLE (CLIP OF 50 EACH)  
  1H-5166 [4] CLIP-WIRE  
  4L-2791 [1] MARKERS  
   
    THE FOLLOWING WIRES ARE AVAILABLE
   
    *6V2369--4 GAUGE
    *5P5675-6 GAUGE
    *5P5622--10 GAUGE
    *5P5624--14 GAUGE
    348CM - 6V3381--18 GAUGE
    346 CM 6V2744--18 GAUGE
  5N-9117 [1] ADAPTER  
  5N-9072 [1] CLIP  
  062-5388 [1] LOCKNUT  
   
    ORDER BY THE METER
 

#SEBP12810726
 

5N-9304: WIRING GP

5N9304 WIRING GP-ENGINE
TYPE 2
AN ATTACHMENT
SEBP12810726 SEBP1281
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5N-8878 Y [1] ENCLOSURE GP  
   
  5N-8941 Y [1] FASTENER GP-WIRING  
   
  5N-8942 Y [1] HARNESS GP-WIRING  
   
   
  Y   SEPARATE ILLUSTRATION
 

#SEBP12810727
 

5N-9304: WIRING GP

5N9304 ENGINE WIRING GROUP-TYPE 1
AN ATTACHMENT
SEBP12810727 SEBP1281
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5N-8878 Y [1] ENCLOSURE GROUP  
   
  5N-0642 Y [1] WIRING GROUP  
   
  5N-8876 [2] BRACKET--TO CYLINDER BLOCK (L.H.REAR)  
   
  0S-1621 [4] BOLT--BRACKET TO CYLINDER BLOCK  
   
  2M-0849 [4] WASHER--BOLT TO BRACKET  
   
  0S-1594 [2] BOLT-ENCLOSURE GROUP TO BRACKET  
   
  5M-2894 [4] WASHER--BOLT TO ENCLOSURE GROUP  
   
  [2] NUT--BOLT TO BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12810728
 

5N-9304: WIRING GP

5N9304 WIRING GP-ENGINE
TYPE 3
AN ATTACHMENT
SEBP12810728 SEBP1281
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
  5N-8941 Y [1] FASTENER GP-ELECTRIC  
   
  4W-4750 Y [1] WIRING GP-ENGINE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12810729
 

5N-8941: FASTENER GP-ENGINE WIRING

5N8941 FASTENER GROUP-TYPE 1
PART OF 5N9304 ENGINE WIRING
AN ATTACHMENT
c320402 SEBP1281
5N8941 FASTENER GP-ENGINE WIRING Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-4934 [13] CLIP  
2. 6K-4935 [13] BRACKET  
3. 1A-2029 [2] BOLT  
4. 5M-2894 [16] WASHER  
5. 5N-8876 [2] BRACKET  
6. 0S-1594 [3] BOLT  
7. 1D-4717 [3] NUT  
8. 0S-1621 [4] BOLT  
9. 2M-0849 [5] WASHER  
10. 0T-0573 [1] BOLT  
11. 3L-3825 [1] SPACER  
12. 0S-1588 [1] BOLT  
13. 6F-5281 [1] BOLT  
14. 9S-9238 [1] SPACER  
15. 0L-1351 [6] BOLT  
16. 5N-9533 [1] CLIP  
17. 5N-9534 [1] BRACKET  
18. 6B-0933 [1] SPACER  
19. 1A-5183 [1] BOLT  
20. 0S-1571 [1] BOLT  
21. 3H-2137 [1] LUG  
22. 9G-9151 B [4] CLIP  
23. 9G-9149 [1] CLIP  
24. 9G-9155 J [1] CLIP  
25. 5N-9070 B [4] COLLAR  
26. 2W-0619 B [1] WIRE AS  
  5P-5624 BD WIRE (14 GAUGE)  
  4S-1988 [1] TERMINAL (BLADE)  
  2L-8077 [1] TERMINAL (RING)  
27. 2W-0618 B [1] WIRE AS  
  5P-5624 BD WIRE (14 GAUGE)  
  4S-1988 [1] TERMINAL (BLADE)  
  2L-8079 [1] TERMINAL (RING)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

Information:

Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
New Heat Shield For Wiring To Electrical Shutoff Group
1984/10/24
Wiring Harness Conduit Component Sizes
1985/02/01
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up
1986/08/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
Heavy Duty Ring Terminals Are Now Being Used on High Voltage Generators {7553}
2005/11/07
Improved Engine Oil Pressure Sensor Is Used on Certain Commercial Engines {1924}
2011/07/11
New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
2013/11/04
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Proper Grounding for the 161-0797 Governor Control As {1264, 1408}
Proper Grounding for the 161-0797 Governor Control As {1264, 1408}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Schematic
Schematics & Wiring Diagrams
CATERPILLAR SWITCHGEAR
Technical Information Bulletin
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
BRIDGE RECTIFIER TEST
BRIDGE RECTIFIER TEST
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Coolant Temperature Switch
3500 Engines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electrical Connector - Inspect
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Connector Contact Identification of Generator Set Control
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Schematics and Wiring Diagrams
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Electric Starting System
3500 Engines
Reading DC Schematics
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New Heat Shield For Wiring To Electrical Shutoff Group{7400,7403,7418}
1984/10/29
Wiring Harness Conduit Component Sizes{1400,1408}
1985/02/04
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Caterpillar Parts SIS Catalog 3512 :

HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
SOLENOID AS-STARTING MOTOR
7T-8854 SOLENOID AS-STARTING MOTOR
VALVE AS
5N-8980 VALVE AS
SOLENOID AS-STARTING MOTOR
3T-8635 SOLENOID AS-STARTING MOTOR
SOLENOID AS
3T-5051 SOLENOID AS
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
SOLENOID AS
3T-3421 SOLENOID AS
HARNESS GP-WIRING
5N-8942 HARNESS GP-WIRING
ENCLOSURE GP
5N-8878 ENCLOSURE GP
WIRING GP-GOVERNOR SOLENOID
5N-8572 WIRING GP-GOVERNOR SOLENOID
ENCLOSURE GP
5N-8878 ENCLOSURE GP
5N-0642 WIRING GP
5N-9304 WIRING GP
5N-9304 WIRING GP
5N-9304 WIRING GP

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.