AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7G0061 FINAL DRIVE GROUP-PART 1 OF 2 SERIAL NO. 84W1177-UP 7G6507-PAGE 136 D10 TRACK-TYPE TRACTOR


POWER TRAIN
DRIVE GP-FINAL
REPAIR GP-CARRIER
VALVE GP-RELIEF
SPROCKET GP
LINES GP-POWER TRAIN OIL

TRACK-TYPE TRACTOR D10 TRACK-TYPE TRACTOR 76X
 D10 TRACTOR / POWER SHIFT / 76X00359-UP (MACHINE) POWERED BY D348 ENGINE SEBP1288 D10 76X   (1978)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
9G-9906 FINAL DRIVE GP
FINAL DRIVE GP
9G-9906 FINAL DRIVE GP
 

#SEBP12880290
 

7G-0061: FINAL DRIVE GP

7G0061 FINAL DRIVE GROUP-PART 1 OF 2
SERIAL NO. 84W1177-UP
7G6507-PAGE 136
c346585 SEBP1288
7G0061 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4045 [8] BOLT-LOCKING  
  3P-8665 [4] WASHER-RETAINING  
2. 5P-7989 [1] RING-RETAINING  
3. 5M-2894 [3] WASHER  
4. 7T-7380 C [4] GEAR (27 TEETH)  
  3P-6349 [4] RING-LOCK  
5. 030-0060 [8] CUP-ROLLER BEARING  
  030-0061 [8] CONE-ROLLER BEARING  
6. 3P-6347 [4] SHAFT  
7. 1D-4638 [35] BOLT  
  9M-2828 [35] WASHER-HARD  
8. 7T-7382 C [4] GEAR-PLANETARY (25 TEETH)  
9. 3P-6371 [8] CONE-ROLLER BEARING  
  3P-6372 [8] CUP-ROLLER BEARING  
10. 3P-6375 [4] RETAINER  
  8T-3279 C [4] SEAL-QUAD RING  
11. 7T-7378 C [4] SHAFT  
12. 5P-4253 [8] BOLT-LOCKING  
13. 3P-6378 [1] COVER-PLANETARY  
  5S-3676 [1] SEAL-O-RING  
14. 0S-1588 [3] BOLT  
15. 3P-6374 [1] RETAINER  
  2H-3931 [1] SEAL-O-RING  
16. 3P-6373 [1] RING-THRUST 13.61CM(5.36IN)O.D.  
  5D-1921 [1] RING-RETAINING 14.5CM(5.71IN)O.D.  
17. 9P-8995 [1] GEAR-SUN (22 TEETH)  
  5B-0582 [1] DOWEL  
18. 5P-1702 [1] RING-RETAINING  
19. 030-8538 C [4] BOLT  
20. 7T-7377 C [1] CARRIER-PLANETARY  
21. 3D-3295 [1] SEAL-O-RING  
22. 5F-0304 [1] PLUG-DRAIN (DRAIN)  
  1S-3888 [1] WASHER-PLUG  
  3H-3385 [1] SEAL-O-RING 2.09CM(.824IN)O.D.  
23. 6F-4855 [1] SEAL-O-RING 1.91CM(.755IN)O.D.  
24. 9W-2131 C [1] GEAR (74 TEETH)  
25. 9P-8996 [1] CARRIER-PLANETARY  
  7G-6507 Y [1] SEGMENT GP-SPRKT  
27. 6V-3298 C [1] PLUG-MAGNETIC (FILL)  
  2S-4078 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12880291
 

7G-0061: FINAL DRIVE GP

7G0061 FINAL DRIVE GROUP-PART 2 OF 2
SERIAL NO. 84W1177-UP
c346586 SEBP1288
7G0061 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7878 [1] RING-RETAINING  
2. 9G-1955 [1] HOLDER-SEAL  
3. 3T-7840 CR [1] HUB-SUPPORT  
4. 0L-1329 [1] BOLT  
  4D-4839 [1] PIPE  
5. 9G-5349 C [1] SEAL GP-DUO-CONE  
  5P-4858 [2] RING-SEALING  
6. 5P-2524 [1] CUP-ROLLER BEARING  
  5P-9290 [1] CONE-ROLLER BEARING  
7. 3P-6370 [1] CUP-ROLLER BEARING  
  3P-6369 [1] CONE-ROLLER BEARING  
8. 8P-6278 [1] BEARING  
9. 2D-0604 [1] BUTTON  
10. 7T-7379 C [1] GEAR (18 TEETH)  
11. 5P-4141 [16] BOLT-LOCKING  
12. 8P-6354 [1] RETAINER  
13. 6T-3145 C [1] HUB-REACTION  
14. 6P-9069 [16] PIN  
15. 9P-9570 [1] HUB-SPROCKET  
16. 1D-4647 [33] BOLT 24.13CM(9.5IN)LONG  
  9M-2828 [33] WASHER-HARD  
17. 8P-5656 [1] SPACER  
18. 5P-4057 [2] SEAL-O-RING  
19. 9G-9066 [1] SHAFT  
20. 1D-4600 [3] BOLT 19.05CM(7.5IN)LONG  
  4D-3704 [3] WASHER-HARD  
21. 7G-0120 [1] BLADDER  
22. 4D-4835 [2] PIPE  
23. 8S-9089 [5] BOLT  
24. 2M-0849 [3] WASHER  
25. 9P-8856 [3] WASHER (STEEL)  
  7G-0119 [3] WASHER (RUBBER)  
  7G-0121 [3] SPACER  
26. 6V-2763 [1] SEAL-LIP TYPE  
27. 9G-1956 [1] RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12880292
 

9G-9906: FINAL DRIVE GP

9G9906 FINAL DRIVE GP-PART 1 OF 2*R
TYPE 1
c229774 SEBP1288
9G9906 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4045 [8] BOLT  
  3P-8665 [4] WASHER  
2. 5P-7989 [1] RING  
3. 5M-2894 [3] WASHER  
4. 3P-6348 [4] GEAR (27 teeth)  
  3P-6349 [4] RING  
5. 030-0060 [8] CUP  
  030-0061 [8] CONE  
6. 3P-6347 [4] SHAFT  
7. 1D-4638 [35] BOLT  
  9M-2828 [35] WASHER  
8. 3P-6377 [4] GEAR (25 teeth)  
9. 3P-6371 [8] CONE  
  3P-6372 [8] CUP  
10. 3P-6375 [4] RETAINER  
  4L-9564 [4] SEAL  
11. 3P-6376 [4] SHAFT  
12. 5P-4253 [8] BOLT  
13. 3P-6378 [1] COVER  
  5S-3676 [1] SEAL  
14. 0S-1588 [3] BOLT  
15. 3P-6374 [1] RETAINER  
  2H-3931 [1] SEAL  
16. 3P-6373 [1] RING 13.61 cm(5.36 in.) O.D.  
  5D-1921 [1] RING 14.5 cm(5.71 in.) O.D.  
17. 9P-8995 [1] GEAR (22 teeth)  
  5B-0582 [1] DOWEL  
18. 5P-1702 [1] RING  
19. 5P-4043 [4] BOLT  
20. 9P-9687 [1] CARRIER  
21. 3D-3295 [1] SEAL  
22. 5F-0304 [1] PLUG (drain)  
  1S-3888 [1] WASHER  
  3H-3385 [1] SEAL 2.08 cm(.824 in.) O. D.  
23. 6F-4855 [1] SEAL 1.91 cm(.755 in.) O.D.  
24. 8P-7721 [1] GEAR (74 teeth)  
25. 9P-8996 [1] CARRIER  
26. 5P-8144 [1] PLUG (fill)  
  2S-4078 [1] SEAL  
 

#SEBP12880293
 

9G-9906: FINAL DRIVE GP

9G9906 FINAL DRIVE GP-PART 2 OF 2*R
TYPE 1
c229775 SEBP1288
9G9906 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7878 [1] RING  
2. 9G-1955 [1] HOLDER  
  6V-2763 [1] SEAL 8.45 cm(3.32 in.)I.D.  
  9G-1956 [1] RING  
3. 9P-9802 [1] HUB  
4. 9P-9570 [1] HUB  
5. 5P-6418 [1] SEAL GROUP  
    (Includes)
  5P-4858 [2] RING  
6. 5P-2524 [1] CUP  
  5P-9290 [1] CONE  
7. 3P-6370 [1] CUP  
  3P-6369 [1] CONE  
8. 8P-6278 [1] BEARING  
9. 2D-0604 [1] BUTTON  
10. 8P-7335 [1] GEAR (18 teeth)  
11. 5P-4141 [16] BOLT  
12. 8P-6354 [1] RETAINER  
13. 3P-6336 [1] HUB  
14. 6P-9069 [16] PIN  
 

#SEBP12880294
 

9G-9906: FINAL DRIVE GP

9G9906 FINAL DRIVE GP-PART 1 OF 2*R
TYPE 2
NOTE: 8C6496 BEARING KIT IS AVAILABLE FOR COMPLETE
REPLACEMENT OF FINAL DRIVE BEARINGS FOR ONE FINAL DRIVE
c350418 SEBP1288
9G9906 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4045 [8] BOLT-LOCKING  
  3P-8665 [4] WASHER-RETAINING  
2. 5P-7989 [1] RING-RETAINING  
3. 5M-2894 [3] WASHER  
4. 7T-7380 C [4] GEAR (27 TEETH)  
  3P-6349 [4] RING-LOCK  
5. 030-0060 [8] CUP-ROLLER BEARING  
  030-0061 [8] CONE-ROLLER BEARING  
6. 3P-6347 [4] SHAFT  
7. 1D-4638 [35] BOLT  
  9M-2828 [35] WASHER-HARD  
8. 7T-7382 C [4] GEAR-PLANETARY (25 TEETH)  
9. 3P-6371 [8] CONE-ROLLER BEARING  
  3P-6372 [8] CUP-ROLLER BEARING  
10. 3P-6375 [4] RETAINER  
  8T-3279 C [4] SEAL-QUAD RING  
11. 7T-7378 C [4] SHAFT  
12. 5P-4253 [8] BOLT-LOCKING  
13. 3P-6378 [1] COVER-PLANETARY  
  5S-3676 [1] SEAL-O-RING  
14. 0S-1588 [3] BOLT  
15. 3P-6374 [1] RETAINER  
  2H-3931 [1] SEAL-O-RING  
16. 3P-6373 [1] RING-THRUST 13.61CM(5.36IN.)O.D.  
  5D-1921 [1] RING-RETAINING 14.5CM(5.71IN.)O.D.  
17. 9P-8995 [1] GEAR-SUN (22 TEETH)  
  5B-0582 [1] DOWEL  
18. 5P-1702 [1] RING-RETAINING  
19. 030-8538 C [4] BOLT  
20. 7T-7377 C [1] CARRIER-PLANETARY  
21. 3D-3295 [1] SEAL-O-RING  
22. 5F-0304 [1] PLUG-DRAIN (DRAIN)  
  1S-3888 [1] WASHER-PLUG  
  3H-3385 [1] SEAL-O-RING 2.09CM(.824IN.)O.D.  
23. 6F-4855 [1] SEAL-O-RING 1.91CM(.755IN.)O.D.  
24. 9W-2131 C [1] GEAR (74 TEETH)  
25. 9P-8996 [1] CARRIER-PLANETARY  
26. 6V-3298 C [1] PLUG-MAGNETIC (FILL)  
  2S-4078 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12880295
 

9G-9906: FINAL DRIVE GP

9G9906 FINAL DRIVE GP-PART 2 OF 2*R
TYPE 2
NOTE: 8C6496 BEARING KIT IS AVAILABLE FOR COMPLETE
REPLACEMENT OF FINAL DRIVE BEARINGS FOR ONE FINAL DRIVE
c350419 SEBP1288
9G9906 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7878 [1] RING-RETAINING  
2. 9G-1955 [1] HOLDER-SEAL  
  6V-2763 [1] SEAL-LIP TYPE 8.45CM(3.32 IN.)I.D.  
  9G-1956 [1] RING  
3. 3T-7840 CR [1] HUB-SUPPORT  
4. 9P-9570 [1] HUB-SPROCKET  
5. 9G-5349 C [1] SEAL GP-DUO-CONE  
  5P-4858 [2] RING-SEALING  
6. 5P-2524 [1] CUP-ROLLER BEARING  
  5P-9290 [1] CONE-ROLLER BEARING  
7. 3P-6370 [1] CUP-ROLLER BEARING  
  3P-6369 [1] CONE-ROLLER BEARING  
8. 8P-6278 [1] BEARING  
9. 2D-0604 [1] BUTTON  
10. 7T-7379 C [1] GEAR (18 TEETH)  
11. 5P-4141 [16] BOLT-LOCKING  
12. 8P-6354 [1] RETAINER  
13. 6T-3145 C [1] HUB-REACTION  
14. 6P-9069 [16] PIN  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12880296
 

7T-8482: REPAIR GP-CARRIER

7T8482 REPAIR GP-CARRIER
REBUILD OF ONE DAMAGED OR WORN PLANET SHAFT BORE IN 9P9687 CARRIER
SEBP12880296 SEBP1288
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-4253 [2] BOLT-LOCKING  
   
  5P-5863 [2] CONE-ROLLER BEARING  
   
  3P-6372 [2] CUP-ROLLER BEARING  
   
  7T-6255 [1] RETAINER  
   
  8H-2046 [1] SEAL-O-RING  
   
  7T-6256 [1] SHAFT-PLANETARY  
   
  7T-9774 [1] SPACER  
 

#SEBP12880297
 

9P-9907: VALVE GP-RELIEF

9P9907 RELIEF VALVE GROUP
PART OF 7G326 POWER TRAIN OIL LINES GROUP SHOWN ON PAGE 137
c230213 SEBP1288
9P9907 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-4437 [ 1] SPOOL ASSEM.  
    (Includes)
2. 4M-2381 [ 1] SPRING  
  1S-2121 [ 1] PLUNGER  
3. 3D-8317 [ 1] RING  
  8M-1013 [ 1] RETAINER  
4. 5M-9624 [ 4] SPACER .254 mm (.01 in.)thick  
  4J-6806 [ 2] SHIM 1.19 mm(.049 in.)thick  
5. 9P-9816 [ 1] BODY  
6. 5P-9714 C [ 1] NIPPLE ASSEM.  
  3J-1907 [ 1] SEAL  
7. 4M-5923 [ 1] SPRING  
8. 0S-1594 [ 2] BOLT  
  5M-2894 [ 2] WASHER  
9. 7G-1625 [ 1] COVER  
10. 8M-5249 [ 1] SEAL  
11. 8M-4446 [ 1] SEAL  
12. 1P-9699 [ 1] STOP  
13. 8H-9513 [ 1] DOWEL  
14. 6V-0852 C [ 1] CAP  
    INDICATES CHANGE
 

#SEBP12880298
 

7G-6507: SEGMENT GP-SPROCKET

7G6507 SPROCKET SEGMENT GROUP
PART OF 7G110 & 7G61 FINAL DRIVE GROUPS SHOWN ON PAGES 130 & 132
c238210 SEBP1288
7G6507 SEGMENT GP-SPROCKET Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-6492 [3] SEGMENT  
2. 8J-7415 [27] WASHER  
3. 5P-5422 [27] BOLT  
  2M-5656 [27] NUT  
 

#SEBP12880299
 

7G-0326: LINES GP-POWER TRAIN OIL

7G326 POWER TRAIN OIL LINES GROUP-PART 1 OF 5
SERIAL NO. 76X359 TO 76X365 INCLUSIVE & 84W610 TO 640 & 84W646 TO 84W811
INCLUSIVE. 9P9907 VALVE PARTS ARE SHOWN ON PAGE 136
c230232 SEBP1288
7G0326 LINES GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your D10 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8896 [ 1] CAP  
  6K-8420 [ 1] NUT  
  2P-1283 [ 1] UNION  
2. 0S-1595 [ 2] BOLT  
3. 5P-8245 [ 4] WASHER  
4. 9P-3964 [ 1] ANGLE  
5. 9P-3066 [ 6] MOUNTING  
6. 2G-0493 [ 3] WASHER  
7. 1D-4585 C [ 3] BOLT  
8. 5P-8247 [ 3] WASHER  
9. 3B-1915 [ 4] BOLT  
10. 5M-2894 [ 4] WASHER  
11. 1P-4577 [ 2] FLANGE  
12. 8M-4987 [ 1] SEAL  
13. 7G-1094 [ 1] HOSE ASSEM.  
    (Includes)
  8S-9355 C H HOSE 52.8 in.(134 cm)  
14. 3S-8501 [ 1] STEM ASSEM. (60 degrees)  
15. 3S-7252 [ 2] SLEEVE  
16. 7S-0574 [ 1] STEM ASSEM. (60 degrees)  
17. 7G-1089 [ 1] HOSE ASSEM. 2.65 m(104.33 in.)  
18. 004-3099 [ 1] CONNECTOR  
19. 8P-6586 [ 1] HOSE ASSEM.  
    (Includes)
  9S-0247 C H HOSE 33.47 in.(85 cm)  
20. 8S-3759 COUPLING ASSEM. (straight)  
21. 3S-7166 [ 2] SLEEVE  
22. 8S-6389 [ 1] COUPLING ASSEM. (90 degrees)  
23. 3H-5368 [ 4] BOLT  
24. 5P-8244 [ 4] WASHER  
25. 1P-4578 [ 2] FLANGE  
26. 8M-4986 [ 2] SEAL 37.69 mm(1.484 in.)I.D.  
27. 1B-2886 [ 2] BOLT  
28. 9P-9907 Y [ 1] VALVE GROUP  
29. 8M-8157 [ 1] SEAL 9.19 mm(.362 in.) I.D.  
30. 9S-4191 [ 1] PLUG  
  3J-1907 [ 1] SEAL  
31. 9S-8010 C [ 1] PLUG  
  2S-4078 C [ 1] SEAL  
    Separate Illustration
    INDICATES CHANGE
    ORDER BY THE INCH
 

Information:

Caterpillar Parts SIS Catalog D10 :

FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
7G-0110 FINAL DRIVE GP
FINAL DRIVE GP
7G-0110 FINAL DRIVE GP
FINAL DRIVE GP
7G-0110 FINAL DRIVE GP
FINAL DRIVE GP
7G-0110 FINAL DRIVE GP
GEAR GP-BEVEL & TRANSFER
3T-4393 GEAR GP-BEVEL & TRANSFER
GEAR GP-BEVEL & TRANSFER
3T-4393 GEAR GP-BEVEL & TRANSFER
FINAL DRIVE GP
7G-0061 FINAL DRIVE GP
FINAL DRIVE GP
9G-9906 FINAL DRIVE GP
FINAL DRIVE GP
9G-9906 FINAL DRIVE GP
FINAL DRIVE GP
9G-9906 FINAL DRIVE GP
FINAL DRIVE GP
9G-9906 FINAL DRIVE GP
7T-8482 REPAIR GP-CARRIER
VALVE GP-RELIEF
9P-9907 VALVE GP-RELIEF
SEGMENT GP-SPROCKET
7G-6507 SEGMENT GP-SPROCKET

Truck sale:

Caterpillar D100, Construction
24,000 
Caterpillar D100, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
Call 
CAT D10

Ace Rental & Repair
 
Call 
CAT D10

Ace Rental & Repair
 
 
CAT D10

RD Williams Parts
 
 
CAT D10

RD Williams Parts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.