5N7276 ENGINE AR NOTE: WHEN ORDERING PARTS GIVE AR NUMBER & S/N. D379B GEN SET ENGINE



ENGINE ARRANGEMENT
ENGINE AR
CONVERSION GP-ENGINE
BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

GEN SET ENGINE D379B GEN SET ENGINE 34Z
 D379B GENERATOR SET ENGINE 34Z00001-UP SEBP1289 D379B 34Z   (1980)

ENGINE ARRANGEMENT

ENGINE AR
5N-7276 ENGINE AR
 

#SEBP12890001
 

5N-7276: ENGINE AR

5N7276 ENGINE AR
NOTE: WHEN ORDERING PARTS GIVE AR NUMBER & S/N.
SEBP12890001 SEBP1289
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
   
   
  8L-5025 Y [1] AFTERCOOLER CONNECTIONS GP  
  7L-6549 Y [1] AIR CLEANER GP  
  2N-3322 Y [2] AIR CLEANER GAUGE GP  
  4L-8787 Y [1] BALANCER GP  
  3N-0945 Y [1] BREATHER GP  
  4L-8788 Y [1] CAMSHAFT GP  
  6L-2868 Y [8] CONNECTING ROD & PISTON GP  
  4L-8791 Y [1] CRANKSHAFT GP  
    S/N 34Z1-1018
  4W-2574 Y [1] CRANKSHAFT GP  
    S/N 34Z1019-UP
  3N-2677 Y [1] CYLINDER BLOCK & COVERS GP  
  3N-2680 RY [1] CYLINDER HEAD & VALVE MECHANISM GP  
  5L-1955 Y [1] FLYWHEEL GP  
  3N-2684 Y [1] FRONT ACCESSORY DRIVE GP  
  7N-8853 Y [1] FUEL FILTER GP  
  5N-7110 Y [1] FUEL INJECTION LINES GP  
  7N-8599 Y [1] FUEL PRIMING PUMP GP  
  7L-0912 Y [1] FUEL PUMP HOUSING GP  
  5N-5632 Y [1] FUEL TRANSFER PUMP GP  
  3N-2685 Y [1] GOVERNOR & FUEL PUMP DRIVE GP  
  5N-1997 Y [1] GOVERNOR SHIELD GP  
  5N-6974 Y [1] INSTRUMENT PANEL GP  
  6L-6292 Y [1] JACKET WATER AFTERCOOLER GP  
  3N-3793 Y [1] LIFTING EYE GP  
  8L-4264 Y [1] MANUAL SHUT-OFF GP  
  3N-1323 Y [1] OIL COOLER & LINES GP  
    S/N 34Z1-846
  3N-2859 Y [1] OIL COOLER & LINES GP  
    S/N 34Z847-UP
  2N-0884 Y [1] OIL FILTER GP  
  5N-2033 Y [1] OIL PAN BASE GP  
    S/N 34Z1-846
  8L-5368 Y [1] OIL PAN BASE GP  
    S/N 34Z847-UP
  5N-3794 Y [1] OIL PUMP GP  
    S/N 34Z1-846
  5N-7891 Y [1] OIL PUMP GP  
    S/N 34Z847-UP
  3N-2976 Y [1] GOVERNOR COVER GP  
  3N-2976 Y [1] SERVICE METER & TACHOMETER DRIVE GP  
  2N-7575 Y [1] TURBOCHARGER GP  
  8L-3421 Y [1] TURBOCHARGER LUBRICATION VALVE GP  
  3N-1445 Y [1] WATER LINES GP  
  4L-8800 RY [1] WATER PUMP GP  
  3N-1718 Y [1] WATER SHIELDED MANIFOLD GP  
  5N-2423 Y [1] WOODWARD GOVERNOR DRIVE GP  
  7N-9923 Y [1] WOODWARD GOVERNOR GP--UG8D  
  7N-4196 Y [1] WOODWARD GOV. SYNCRONIZING MOTOR SWITCH  
   
    REFER TO INDEX FOR GASKET KIT LOCATIONS
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12890002
 

3N-9129: CONVERSION AR-ENGINE

3N9129 ENGINE CONVERSION ARRANGEMENT
PROVIDES WATER COOLED EXHAUST MANIFOLD AND WATER COOLED
TURBOCHARGER SHIELD
AN ATTACHMENT
SEBP12890002 SEBP1289
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
   
   
   
  3N-1678 Y [1] WATER COOLED EXHAUST MANIFOLD GROUP  
   
  6N-8222 Y [2] TURBOCHARGER GROUP  
   
  3N-8056 Y [1] SHIELD GROUP  
   
  7M-7273 [2] GASKET  
   
  2N-8433 [2] BRACE  
   
  3H-5841 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12890003
 

3N-2829: CONVERSION AR-ENGINE

3N2829 EBULLIENT COOLING CONVERSION AR
AN ATTACHMENT
SEBP12890003 SEBP1289
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
   
   
   
  6L-9015 Y [1] AFTERCOOLER CONNECTINS GP  
   
  2N-6689 Y [1] MANIFOLD GP  
   
  3N-2121 Y [1] OIL COOLER LINES GP  
   
  6N-8222 Y [2] TURBOCHARGER GP  
   
  6L-9162 [1] TUBE AS-OIL COOLER TO AFTERCOOLER  
  3B-4508 [3] LOCKWASHER-1/2 IN.-TUBE AS-TO OILCOOLER  
   
  1D-4719 [1] NUT--TUBE AS TO OIL COOLER  
  4L-8120 [1] GASKET--ORIFICE TO OIL COOLER  
  4L-8120 [1] GASKET--TUBE AS TO ORIFICE  
  6L-5621 [1] ORIFICE--OIL COOLER OUTLET  
  7M-7273 [2] GASKET--TURBOCHARGER  
  8M-2295 [8] BOLT--TURBOCHARGER TO SUPPORT  
  0S-1595 [2] BOLT--TUBE AS TO OIL COOLER  
  0S-1917 [1] STUD--TUBE ASSEMBLY TO OIL COOLER  
  3N-7122 [1] TEE--OIL PUMP OUTLET  
    -OR-
  5N-7848 [1] TEE--OIL PUMP OUTLET  
  7B-9665 [1] PLUG--TO TEE  
  5N-7857 [1] BRACKET--BLOCK TO TEE  
  0L-1351 [2] BOLT--BRACKET TO TEE  
  5M-2894 [9] WASHER--BRACKET TO TEE  
  0S-1591 [3] BOLT--TUBE AS TO OIL COOLER  
  3N-7105 [1] TUBE AS--TEE TO OIL COOLER  
  6H-7127 [3] LUG--BRACKET TO BLOCK  
  3P-0651 [2] SEAL--TUBE AS TO TEE  
  5N-7856 [1] BRAKET--BLOCK TO TUBE AS  
  3B-1915 [2] BOLT--BRACKET TO TEE  
  1A-2029 [2] BOLT--TUBE AS TO OIL COOLER  
  2W-7134 [4] SEAL-VALVE COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP12890004
 

3N-2677: CYLINDER BLOCK & COVERS GP

3N2677 CYLINDER BLOCK AND COVERS GROUP-PART 1 OF 2
SERIAL NO. 34Z1 TO 34Z846 INCLUSIVE
c229878 SEBP1289
3N2677 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
  4L-6788 [64] STUD  
  5L-2894 [5] BEARING  
    (Parts of 3N6988 & 3N6990 Assem.)
  9S-1366 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  5N-3275 C [1] GASKET  
  0L-1351 [4] BOLT  
  3B-4506 C [4] LOCKWASHER  
  5F-9303 [2] COVER  
  1F-3131 [2] GASKET  
  3B-0551 [2] PLUG  
  1A-0168 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  9M-7269 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  4F-2609 [1] DOWEL  
  7L-2593 [1] SHAFT ASSEM.  
  3F-6795 [1] PIN  
  0L-2061 [2] DOWEL (875" LONG)  
  2B-2994 [2] DOWEL (150" LONG)  
    (Parts of 3N6988 & 3N6990 Assem.)
  7F-7669 [1] GASKET  
  7F-7670 [1] COVER  
  0L-1351 [4] BOLT  
  4L-4653 [2] PLATE  
  1A-8537 [8] BOLT  
  3B-4510 [14] LOCKWASHER  
  8S-9092 [6] BOLT  
  2N-7193 [2] CAP  
  1A-9759 [8] DOWEL  
    (Parts of 3N6988 & 3N6990 Assem.)
  1F-4418 [1] COVER  
  1F-9223 [1] GASKET  
  2A-3348 [1] DOWEL  
  1A-2223 [16] DOWEL (1" LONG)  
  6B-6863 C [4] DOWEL (50" LONG)  
    (Parts of 3N6988 & 3N6990 Assem.)
  2N-5120 [10] STUD  
  3S-1356 [10] NUT  
    (Parts of 3N6988 & 3N6990 Assem.)
  2N-7194 [3] CAP  
    (Part of 3N6988 & 3N6990 Assem.)
  3N-6988 [1] BLOCK ASSEM.  
    (For Use With Compression Release)
    -OR-
  3N-6990 [1] BLOCK ASSEM.  
    (For Use Without Compression Release)
  5H-4279 [4] PLUG  
  1H-8645 [2] SCREW  
  2A-3278 [2] GASKET  
    (PARTS OF 3N6988 ASSEM.)
  4L-7586 [1] GASKET  
  5M-6213 [2] PLUG  
    (Part of 3N6988 & 3N6990 Assem.)
  4L-3395 [2] DOWEL  
  7L-2593 [1] SHAFT ASSEM.  
  7F-9504 C [2] DOWEL  
  4F-2609 [1] PIN (437" LONG)  
  3F-6795 [1] PIN  
    (Parts of 3N6988 & 3N6990 Assem.)
  C   INDICATES CHANGE
 

#SEBP12890005
 

3N-2677: CYLINDER BLOCK & COVERS GP

3N2677 CYLINDER BLOCK AND COVERS GROUP-PART 2 OF 2
SERIAL NO. 34Z1 TO 34Z846 INCLUSIVE
c229879 SEBP1289
3N2677 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
  1A-1135 [4] BOLT  
  2A-4462 [2] LOCK  
  8N-4708 C [8] BAND  
  8L-4857 [4] COVER  
  1F-4419 [4] GASKET  
  0S-0509 C [42] BOLT 19.05 mm(.75 in.) long  
  3B-4506 C [42] LOCKWASHER  
  6L-7815 [24] SEAL  
  8N-9174 C [8] LINER  
  1A-9759 [8] DOWEL  
  2N-4518 [1] PLATE ASSEM.  
  2N-4516 [1] ADAPTER  
    (PART OF 2N4518 ASSEM.)
  8F-8145 C [1] FLANGE  
  1F-3131 [1] GASKET  
  1B-5174 [1] PLUG  
  0S-1588 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1F-4418 [3] COVER  
  1F-9223 [3] GASKET  
  5F-0304 [1] PLUG  
  5B-8932 [1] GASKET  
  0S-0509 C [60] BOLT  
  3B-4506 C [60] LOCKWASHER  
  6L-2787 [1] HOUSING (FLYWHEEL)  
  C   INDICATES CHANGE
 

#SEBP12890006
 

3N-2677: CYLINDER BLOCK & COVERS GP

3N2677 CYLINDER BLOCK AND COVERS GROUP-PART 1 OF 2
SERIAL NO. 34Z847-UP
c182791 SEBP1289
3N2677 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
  4L-6788 [64] STUD  
  5L-2894 [5] BEARING  
    (Parts of 3N6988 & 3N6990 Assem.)
  9S-1366 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  5N-3275 [1] GASKET  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  5F-9303 [2] COVER  
  1F-3131 [2] GASKET  
  3B-0551 [2] PLUG  
  1A-0168 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  9M-7269 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  4F-2609 [1] DOWEL  
  7L-2593 [1] SHAFT ASSEM  
  3F-6795 [1] PIN  
  0L-2061 [2] DOWEL (875" LONG)  
  2B-2994 [2] DOWEL (150" LONG)  
    (Parts of 3N6988 & 3N6990 Assem.)
  7F-7669 [1] GASKET  
  7F-7670 [1] COVER  
  0L-1351 [4] BOLT  
  4L-4653 [2] PLATE  
  1A-8537 [8] BOLT  
  3B-4510 [14] LOCKWASHER  
  8S-9092 [6] BOLT  
  2N-7193 [2] CAP  
  1A-9759 [8] DOWEL  
    (Parts of 3N6988 & 3N6990 Assem.)
  1F-4418 [1] COVER  
  1F-9223 [1] GASKET  
  2A-3348 [1] DOWEL  
  1A-2223 [16] DOWEL (1" LONG)  
  6B-6863 C [4] DOWEL (50" LONG)  
    (Parts of 3N6988 & 3N6990 Assem.)
  2N-5120 [10] STUD  
  3S-1356 [10] NUT  
    (Parts of 3N6988 & 3N6990 Assem.)
  2N-7194 [3] CAP  
    (Part of 3N6988 & 3N6990 Assem.)
  3N-6988 [1] BLOCK ASSEM.  
    (For Use With Compression Release)
    -OR-
  3N-6990 [1] BLOCK ASSEM.  
    (For Use Without Compression Release)
  5H-4279 [4] PLUG  
  1H-8645 [2] SCREW  
  2A-3278 [2] GASKET  
    (PARTS OF 3N6988 ASSEM.)
  4L-7586 [1] GASKET  
  5M-6213 [2] PLUG  
    (Part of 3N6988 & 3N6990 Assem.)
  4L-3395 [2] DOWEL  
  7L-2593 [1] SHAFT ASSEM.  
  7F-9504 [2] DOWEL  
  4F-2609 [1] PIN (437" LONG)  
  3F-6795 [1] PIN  
    (Parts of 3N6988 & 3N6990 Assem.)
 

#SEBP12890007
 

3N-2677: CYLINDER BLOCK & COVERS GP

3N2677 CYLINDER BLOCK AND COVERS GROUP-PART 2 OF 2
SERIAL NO. 34Z847-UP
c182792 SEBP1289
3N2677 CYLINDER BLOCK & COVERS GP Parts scheme
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
  1A-1135 [4] BOLT  
  2A-4462 [2] LOCK  
  8N-4708 [8] BAND  
  8L-4857 [4] COVER  
  1F-4419 [4] GASKET  
  0S-0509 [42] BOLT  
    19.05 mm(.75 in.) long
  3B-4506 [42] LOCKWASHER  
  6L-7815 [24] SEAL  
  8N-9174 [8] LINER  
  1A-9759 [8] DOWEL  
  2N-4518 [1] PLATE ASSEM.  
  2N-4516 [1] ADAPTER  
    (PART OF 2N4518 ASSEM.)
  8F-8145 [1] FLANGE  
  1F-3131 [1] GASKET  
  1B-5174 [1] PLUG  
  0S-1588 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  1F-4418 [3] COVER  
  1F-9223 [3] GASKET  
  5F-0304 [1] PLUG  
  5B-8932 [1] GASKET  
  0S-0509 CH [3] BOLT  
  3B-4506 CH [3] LOCKWASHER  
  0S-0509 C [60] BOLT  
  3B-4506 C [60] LOCKWASHER  
  6L-2787 [1] HOUSING  
    (FLYWHEEL)
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP12890008
 

4L-8791: CRANKSHAFT GP

4L8791 CRANKSHAFT GP
S/N 34Z1-1018
c229870 SEBP1289
4L8791 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
1. 8L-3972 [2] BAFFLE  
2. 3N-3234 [2] RING  
3. 3N-9160 C [2] RING  
4. 3N-7326 C [1] THROWER  
5. 8N-7764 C [5] BEARING (Standard)  
  8N-7765 AB BEARING-MAIN (0.63-U.S.)  
  8N-7766 AB BEARING-MAIN (1.27-U.S.)  
  8N-7767 AB BEARING-MAIN (0.63-O.S.)  
  8N-7768 AB BEARING-MAIN (0.63-U.S.-0.63-O.S.)  
  2N-7117 C [5] BEARING (.050" Undersize)  
6. 3N-2957 RC [1] CRANKSHAFT ASSEM.  
    (Includes)
7. 5P-3476 [4] BOLT  
8. 7B-0537 [8] DOWEL  
9. 5L-2683 [8] BOLT  
10. 3N-7327 C [1] THROWER  
11. 5L-1857 [1] ADAPTER  
12. 6F-7035 [10] BOLT  
  3B-4514 [10] LOCKWASHER  
13. 0S-1594 [24] BOLT  
  3B-4506 [24] LOCKWASHER  
14. 5L-2093 [2] GASKET  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12890009
 

4W-2574: CRANKSHAFT GP

4W2574 CRANKSHAFT GP
S/N 34Z1019-UP
c318374 SEBP1289
4W2574 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D379B GEN SET ENGINE:

Pos. Part No Qty Parts name Comments
1. 4W-2567 [1] ADAPTER-SEAL  
2. 4W-2607 [1] SEAL GP-CRANKSHAFT  
3. 4W-2566 [1] ADAPTER-SEAL  
4. 4W-2606 [1] SEAL GP-CRANKSHAFT  
5. 8N-7764 [5] BEARING-MAIN (STANDARD)  
  8N-7765 AB BEARING-MAIN (0.63-U.S.)  
  8N-7766 AB BEARING-MAIN (1.27-U.S.)  
  8N-7767 AB BEARING-MAIN (0.63-O.S.)  
  8N-7768 AB BEARING-MAIN (0.63-U.S.-0.63-O.S.)  
  2N-7117 [5] BEARING 1.27MM(.05IN)U.S.  
6. 3N-2957 R [1] CRANKSHAFT AS  
  5L-2662 [4] COUNTERWEIGHT  
7. 5P-3476 [4] BOLT-SOCKET HEAD  
8. 7B-0537 [8] DOWEL  
9. 5L-2683 [8] BOLT  
10. 5L-2093 [2] GASKET  
11. 3N-7821 [1] ADAPTER  
12. 6F-7035 [10] BOLT  
13. 0S-1594 [24] BOLT  
  [1] FORM  
    INSTALLATION OF
    CRANKSHAFT SEAL)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Engine Replacement
1982/04/07
Reference Chart for Engine Improvements
1982/11/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18
New Engine News Format {0374}
1999/12/01
Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
How Is Service Information Accessed / Used {1000}
2009/04/27
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Differences in Appearance of Cat <SUP>&reg;</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Engine Design
D379B, D398B, D399 GENERATOR SET ENGINES
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Reuse And Salvage Guidelines
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group{0374,1000}
1982/08/30
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Remove Shackle Assembly When The Generator Is Put Into Operation{7002,4450}
1984/03/12
Information For Reversing Crankshaft Rotation Of All 6.25&quot; Bore V8, V12 And V16 Engines{1000}
1984/10/08
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Additional Vibration Limits For Generator Set Engines {7002}
1993/09/13
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D379B :

3N-9129 CONVERSION AR-ENGINE
3N-2829 CONVERSION AR-ENGINE
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CYLINDER BLOCK & COVERS GP
3N-2677 CYLINDER BLOCK & COVERS GP
CRANKSHAFT GP
4L-8791 CRANKSHAFT GP
CRANKSHAFT GP
4W-2574 CRANKSHAFT GP

Truck sale: