AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D398B GENERATOR SET ENGINE 35Z00001-UP BASIC ENGINE Caterpillar SIS



GEN SET ENGINE D398B GEN SET ENGINE 35Z
 D398B GENERATOR SET ENGINE 35Z00001-UP SEBP1290 D398B 35Z   (1980)

Parts group D398B:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
4L-1131 CAMSHAFT GP
4L1131 CAMSHAFT GP
S/N 35Z678-UP
CAMSHAFT GP
4L-1131 CAMSHAFT GP
4L1131 CAMSHAFT GP
S/N 35Z1-677
COUPLING GP
GUARD GP-COUPLING
3N-5765 GUARD GP-COUPLING
3N5765 FLYWHEEL COUPLING GUARD GROUP
AN ATTACHMENT
3N-8988 COUPLING AR-FRONT
3N8988 FRONT COUPLING ARRANGEMENT
PROVIDES A COUPLING FOR DRIVING A GENERATOR FROM FRONT OF
CRANKSHAFT. ALL OTHER GENERATORS FURNISH 1-3N5596 HUB
COUPLING GP-FLEXIBLE
5N-3764 COUPLING GP-FLEXIBLE
5N3764 FLEXIBLE COUPLING GROUP-VISCOUS DAMPED
PART OF 3N8988 & 3N8996 COUPLING ARRANGEMENTS SHOWN ON PAGES 14A & 14D
GUARD GP-COUPLING
3N-8676 GUARD GP-COUPLING
3N8676 COUPLING GUARD GROUP-BAND
PART OF 3N8677 COUPLING GUARD GROUP SHOWN ON PAGE 14E
FASTENER GP-COUPLING
3N-8647 FASTENER GP-COUPLING
3N8647 FASTENER GROUP-2 REQUIRED
PART OF 3N8988 & 3N8996 COUPLING ARRANGEMENTS SHOWN ON PAGES 14A & 14D
COUPLING AR-SHAFT TO SHAFT
3N-8996 COUPLING AR-SHAFT TO SHAFT
3N8996 COUPLING ARRANGEMENT-SHAFT TO SHAFT
5N3764 COUPLING, 3N8647 FASTENER, 3N5620 SPACER & 3N8677 GUARD PARTS ARE
SHOWN ON PAGES 14B, 14C AND 14E
SPACER GP-DISC
3N-5620 SPACER GP-DISC
3N5620 DISCONNECT SPACER GROUP
PART OF 3N8996 COUPLING AR
GUARD GP-COUPLING
3N-8677 GUARD GP-COUPLING
3N8677 COUPLING GUARD GROUP
PART OF 3N8988 & 3N8996 COUPLING ARRANGEMENTS SHOWN ON PAGES 14A & 14D
3N8676 GUARD PARTS ARE SHOWN ON PAGE 14C
FLEXIBLE COUPLING HUB
FLEXIBLE COUPLING HUB
FOR USE WITH 3N8988 & 3N8996 COUPLING ARRANGEMENTS
& 5N3765 COUPLING GROUP
COUPLING GP-FLEXIBLE
5N-3765 COUPLING GP-FLEXIBLE
5N3765 FLEXIBLE COUPLING GROUP
AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
8N-9568 MOUNTING GP-ENGINE FLEXIBLE
8N9568 FLEXIBLE ENGINE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS & 3N2463 RADIATOR GROUP SHOWN ON PAGE 47
AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
8N-9567 MOUNTING GP-ENGINE FLEXIBLE
8N9567 FLEXIBLE ENGINE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS. CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
COUPLING GP-GENERATOR
8N-7152 COUPLING GP-GENERATOR
8N7152 COUPLING GP-GENERATOR-FLEXIBLE
PART OF 8N7151 & 7W8708 INSTALLATION ARS
AN ATTACHMENT
COUPLING GP-DRIVE
7L-5479 COUPLING GP-DRIVE
7L5479 GENERATOR DRIVE COUPLING GROUP
PART OF 5L2462 GENERATOR INSTALLATION ARRANGEMENT SHOWN ON PAGE 203
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
4L-1134 CRANKSHAFT GP
4L1134 CRANKSHAFT GROUP
SERIAL NO. 35Z1 TO 35Z1532 INCLUSIVE
CRANKSHAFT GP
4W-7616 CRANKSHAFT GP
4W7616 CRANKSHAFT GROUP
SERIAL NO. 35Z1533-UP
SEAL GP-CRANKSHAFT CONVERSION
4W-2568 SEAL GP-CRANKSHAFT CONVERSION
4W2568 SEAL GP-CRANKSHAFT CONVERSION-FRONT-STANDARD ROTATION
WHEN USING THIS GROUP TO CONVERT AN ENGINE A NEW FRONT ADAPTER
MUST ALSO BE USED
FIELD INSTALLATION
SEAL GP-CRANKSHAFT CONVERSION
4W-2571 SEAL GP-CRANKSHAFT CONVERSION
4W2571 SEAL GP-CRANKSHAFT CONVERSION-REAR-OPPOSITE ROTATION
FIELD INSTALLATION
SEAL GP-CRANKSHAFT CONVERSION
4W-2570 SEAL GP-CRANKSHAFT CONVERSION
4W2570 SEAL GP-CRANKSHAFT CONVERSION-FRONT OPPOSITE ROTATION
WHEN USING THIS GROUP TO CONVERT AN ENGINE A NEW FRONT ADAPTER
MUST ALSO BE USED
FIELD INSTALLATION
SEAL GP-CRANKSHAFT CONVERSION
4W-2569 SEAL GP-CRANKSHAFT CONVERSION
4W2569 SEAL GP-CRANKSHAFT CONVERSION
REAR-STANDARD ROTATION
FIELD INSTALLATION
CONNECTING ROD & MAIN BEARING REPLACEMENTS
CONNECTING ROD & MAIN BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
3N2678 CYLINDER BLOCK & COVERS GROUP-SIDE VIEW-PART 1 OF 2
SERIAL NO. 35Z1 TO 35Z966 INCLUSIVE
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
3N2678 CYLINDER BLOCK & COVERS GROUP-FRONT VIEW-PART 2 OF 2
SERIAL NO. 35Z1 TO 35Z966 INCLUSIVE
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
3N2678 CYLINDER BLOCK & COVERS GROUP-SIDE VIEW-PART 1 OF 2
SERIAL NO. 35Z967 TO 35Z1220 INCLUSIVE
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
3N2678 CYLINDER BLOCK & COVERS GROUP-FRONT VIEW-PART 2 OF 2
SERIAL NO. 35Z967 TO 35Z1220 INCLUSIVE
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
3N2678 CYLINDER BLOCK & COVERS GROUP-SIDE VIEW-PART 1 OF 2
SERIAL NO. 35Z1221-UP
CYLINDER BLOCK & COVERS GP
3N-2678 CYLINDER BLOCK & COVERS GP
3N2678 CYLINDER BLOCK & COVERS GROUP-FRONT VIEW-PART 2 OF 2
SERIAL NO. 35Z1221-UP
VALVE AR-EXPLOSION RELIEF
3N-6398 VALVE AR-EXPLOSION RELIEF
3N6398 CRANKCASE EXPLOSION RELIEF VALVE ARRANGEMENT
AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD GP
3N-2681 CYLINDER HEAD GP
3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP-SIDE VIEW-PART 1 OF 2*R
SERIAL NO. 35Z1 TO 35Z542 INCLUSIVE
CYLINDER HEAD GP
3N-2681 CYLINDER HEAD GP
3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP-FRONT VIEW-PART 2 OF 2*R
SERIAL NO. 35Z1 TO 35Z542 INCLUSIVE
CYLINDER HEAD GP
3N-2681 CYLINDER HEAD GP
3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP-SIDE VIEW-PART 1 OF 2*R
SERIAL NO. 35Z543 TO 35Z1110 INCLUSIVE
CYLINDER HEAD GP
3N-2681 CYLINDER HEAD GP
3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP-FRONT VIEW-PART 2 OF 2*R
SERIAL NO. 35Z543 TO 35Z1110 INCLUSIVE
5N8320 CYLINDER HEAD PARTS ARE SHOWN ON PAGE 13E
CYLINDER HEAD GP
3N-2681 CYLINDER HEAD GP
3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP-PART 1*R
SERIAL NO. 35Z1111-UP
CYLINDER HEAD GP
3N-2681 CYLINDER HEAD GP
3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP-PART 2*R
SERIAL NO. 35Z1111-UP
5N8882 CYLINDER HEAD PARTS ARE SHOWN ON PAGE 13F
CYLINDER HEAD GP
5N-8320 CYLINDER HEAD GP
5N8320 CYLINDER HEAD GROUP
SERIAL NO. 35Z543 TO 35Z1110 INCLUSIVE
PART OF 3N2681 CYLINDER HEAD & VALVE MECHANISM
CYLINDER HEAD GP
5N-8882 CYLINDER HEAD GP
5N8882 CYLINDER HEAD GROUP
SERIAL NO. 35Z1111-UP
PART OF 3N2681 CYLINDER HEAD & VALVE MECHANISM GROUP SHOWN ON PAGE 13D
DAMPER GP
DAMPER GP
3N-6355 DAMPER GP
3N6355 VIBRATION DAMPER GROUP
SERIAL NO. 35Z1 TO 35Z1532 INCLUSIVE
DAMPER GP
4W-2556 DAMPER GP
4W2556 VIBRATION DAMPER GROUP
SERIAL NO. 35Z1533-UP
DAMPER GP
3N-5579 DAMPER GP
3N5579 VIBRATION DAMPER GROUP
PART OF 3N8988 FRONT COUPLING ARRANGEMENT
DRIVE GP-ACCESSORY
DRIVE GP-FRONT ACCESSORY
3N-2684 DRIVE GP-FRONT ACCESSORY
3N2684 FRONT ACCESSORY DRIVE GROUP-PART 1
DRIVE GP-FRONT ACCESSORY
3N-2684 DRIVE GP-FRONT ACCESSORY
3N2684 FRONT ACCESSORY DRIVE GROUP-PART 2
DRIVE GP-FRONT ACCESSORY
3N-2683 DRIVE GP-FRONT ACCESSORY
3N2683 FRONT ACCESSORY DRIVE GROUP-PART 1 OF 3
AN ATTACHMENT
DRIVE GP-FRONT ACCESSORY
3N-2683 DRIVE GP-FRONT ACCESSORY
3N2683 FRONT ACCESSORY DRIVE GROUP-PART 2 OF 3
AN ATTACHMENT
DRIVE GP-FRONT ACCESSORY
3N-2683 DRIVE GP-FRONT ACCESSORY
3N2683 FRONT ACCESSORY DRIVE GROUP-PART 3 OF 3
AN ATTACHMENT
COVER GP-ACCESSORY DRIVE
5N-3374 COVER GP-ACCESSORY DRIVE
5N3374 FRONT ACCESSORY DRIVE COVER GROUP
FOR USE WITH FRONT ACCESSORY DRIVE GROUP. AN ATTACHMENT
DRIVE GP-AUXILIARY
3N-8641 FASTENER GP-FRONT DRIVE SHAFT
3N8641 FRONT DRIVE SHAFT FASTENER GROUP
PART OF 3N8988 FRONT COUPLING ARRANGEMENT LISTED ON PAGE 14A
DRIVE GP-AUXILIARY
3N-6720 DRIVE GP-AUXILIARY
3N6720 AUXILIARY DRIVE GROUP
ALSO PART OF 3N7846 FAN DRIVE GROUP SHOWN ON PAGE 19
AN ATTACHMENT
DRIVE GP-AUXILIARY
6L-2120 DRIVE GP-AUXILIARY
6L2120 AUXILIARY DRIVE GROUP-SAE STANDARD ENGINE ROTATION 40 HP @ 1300 RPM
NOTE: FOR USE WITH RAW WATER PUMP. AN ATTACHMENT
SHAFT GP-STUB
3N-6721 SHAFT GP-STUB
3N6721 FRONT POWER TAKE-OFF STUD SHAFT GROUP
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
3N-7846 DRIVE GP-FAN
3N7846 FAN DRIVE GROUP
3N6720-PAGE 18
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GROUP
5L-1995 FLYWHEEL GROUP
5L1995 FLYWHEEL GROUP
LIFTING GP-ENGINE
LIFTING GP
3N-0846 LIFTING GP
3N0846 LIFTING EYE GROUP
MISCELLANEOUS INFORMATION
3N-9536 FASTENER GP
3N9536 FASTENER GROUP-GUARD TO GUARD
PART OF 3N8988 COUPLING ARRANGEMENT LISTED ON PAGE 14A
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
8N-9569 MOUNTING GP-ENGINE
8N9569 FLEXIBLE ENGINE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS AND 3N2609 & 3N2610 RADIATOR GROUPS
SHOWN ON PAGES 49 & 51. AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
8N-9568 MOUNTING GP-ENGINE FLEXIBLE
8N9568 FLEXIBLE ENGINE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS & 3N2463 RADIATOR GROUP SHOWN ON PAGE 47
AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
8N-9567 MOUNTING GP-ENGINE FLEXIBLE
8N9567 FLEXIBLE ENGINE MOUNTING GROUP
FOR USE WITH GENERATOR SET RAILS. CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
MOUNTING GP-ENGINE
3N-5496 MOUNTING GP-ENGINE
3N5496 ENGINE MOUNTING GROUP-REAR VIEW
FOR USE WITH 21" OIL FIELD BASES. AN ATTACHMENT
MOUNTING GP-ENGINE
5N-9193 MOUNTING GP-ENGINE
5N9193 ENGINE MOUNTING GROUP-REAR DRIVE
PROVIDES HARDWARE TO ATTACH ENGINE TO THE TUBULAR PETROLEUM GENERATOR SET
BASE. AN ATTACHMENT
MOUNTING GP-ENGINE
4W-3651 MOUNTING GP-ENGINE
4W3651 ENGINE MOUNTING GROUP
AN ATTACHMENT
MOUNTING GP-ENGINE
4W-3650 MOUNTING GP-ENGINE
4W3650 ENGINE MOUNTING GROUP
AN ATTACHMENT
MOUNTING GP-ENGINE
7W-1806 MOUNTING GP-ENGINE
7W1806 MOUNTING GP-ENGINE
REAR DRIVE
AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
5N-2034 PAN GP-OIL
5N2034 OIL PAN GROUP-PART 1
SERIAL NO. 35Z1 TO 35Z966 INCLUSIVE
PAN GP-OIL
5N-2034 PAN GP-OIL
5N2034 OIL PAN GROUP-PART 2
SERIAL NO. 35Z1 TO 35Z966 INCLUSIVE
PAN GP-OIL
2W-3618 PAN GP-OIL
2W3618 OIL PAN GROUP
FIELD REPLACEMENT FOR 8L6247-PAGE 30
LINES GP-DRAIN
5N-9216 LINES GP-DRAIN
5N9216 DRAIN LINES GROUP
PROVIDES EQUIPMENT TO RELOCATE ENGINE OIL PAN DRAIN
PISTON & ROD GP
PISTON & ROD GP
6L-2868 PISTON & ROD GP
6L2868 CONNECTING ROD & PISTON GROUP-12 REQUIRED
PULLEY GP
PULLEY GP-CRANKSHAFT
5N-1785 PULLEY GP-CRANKSHAFT
5N1785 FAN DRIVE GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
V-Belt Tension Chart
D379B, D398B, D399 GENERATOR SET ENGINES
Engine News
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters
1980/01/09
New Camshaft Has Improved Profile (Shape) Of Exhaust Cams
1982/02/24
New 8T2998 Lubricant Available
1986/03/01
Phosphate Coating Added To Camshaft Lobes{1210}
1996/02/16
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Specifications
Camshaft And Timing Gears
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft
D379B, D398B & D399 GENRERATOR SET ENGINES
Camshaft Bearings
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
New Camshaft Has Improved Profile (Shape) Of Exhaust Cams{1210}
1982/02/15
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24
Engine News
Procedure To Stop Lubricant Leakage From Flexible Couplings
1981/07/15
Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group
1990/07/01
Two Bearing Close Coupled Gensets Experience A Noise In The Coupling During Engine Shut Down {4456}
1998/11/01
Special Instruction
Installation of Flexible Mounting Groups{1152, 1353}
Installation of Flexible Mounting Groups{1152, 1353}
Installation Of 3N5620 Spacer Group Or 3N5573 Spacer Assembly{3252}
Installation Of 3N5620 Spacer Group Or 3N5573 Spacer Assembly{3252}
Specifications
7L5479 Coupling Group<BR> (For Generator Drive)
D379B, D398B & D399 GENERATOR SET ENGINES ATTACHMENTS
Disassembly and Assembly
Coupling - Install
SR4B Generators
Coupling - Remove
SR4B Generators
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Service Magazine
Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/15
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group{1152}
1990/06/18
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Crankshaft Wear Sleeve For Engines With Lip-Type Seals
1982/08/25
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Information For Reversing Crankshaft Rotation Of All 6.25&quot; Bore V8, V12 And V16 Engines
1984/10/03
Correct Specifications For Crankshaft Deflection
1985/01/16
New Crankshaft Seals Used
1985/06/01
New Part Numbers Designate Crankshaft Use
1985/07/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Identification Of Crankshafts For Marine Society Approval
1986/06/01
Replacement Counterweights and Information for Replacement of Counterweights and for Balancing of the Crankshaft {1202, 1231}
2006/09/11
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Special Handling Information And Installation Procedure For 4W2568, 4W2569, 4W2570 And 4W2571 Crankshaft Seal Conversion Groups And 4W2606 Or 4W2607 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information And Installation Procedure For 4W2568, 4W2569, 4W2570 And 4W2571 Crankshaft Seal Conversion Groups And 4W2606 Or 4W2607 Crankshaft Seal Group{1160, 1161, 1202}
Field Replacement Of 5L2662 And 6L8201 Counterweights On Crankshafts For 6.25 Bore Vee Engines{1202}
Field Replacement Of 5L2662 And 6L8201 Counterweights On Crankshafts For 6.25 Bore Vee Engines{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
D379B, D398B, D399 GENERATOR SET ENGINES
Bearing Surface (Journal) For Connecting Rods
D379B, D398B, D399 GENERATOR SET ENGINES
Bearing Surface (Journal) For Main Bearings
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Front Seal Ring And Thrower
D379B, D398B & D399 GENRERATOR SET ENGINES
Crankshaft Main Bearings
D379B, D398B & D399 GENRERATOR SET ENGINES
Crankshaft Rear Seal Ring And Thrower
D379B, D398B & D399 GENRERATOR SET ENGINES
Camshaft Bearings
D379B, D398B & D399 GENRERATOR SET ENGINES
Crankshaft
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Wear Sleeve For Engines With Lip-Type Seals{1160,1161}
1982/07/05
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Replacement Counterweights And Information For Replacement Of Counterweights And Balancing The Crankshaft{1202,0652}
1983/09/05
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Information For Reversing Crankshaft Rotation Of All 6.25&quot; Bore V8, V12 And V16 Engines{1000}
1984/10/08
Correct Specifications For Cranskshaft Deflection {1202}
1985/01/14
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
New Crankshaft Seals Used{1160,1161,1202}
1985/06/03
New Part Numbers Designate Crankshaft Use{1202}
1985/06/24
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Identification Of Crankshafts For Marine Society Approval{1202}
1986/05/12
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V3147 Main Bearing Wrench Now Available
1980/11/12
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life
1981/04/22
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10
New Liner Seat Insert With O-Ring Seal Available
1982/02/10
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Gasket Changed For Cylinder Block Side Cover
1984/05/16
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Oil Pump Relief Valve
D379B, D398B, D399 GENERATOR SET ENGINES
Oil Pump Relief Valve
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Block<BR> (Earlier)
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Liner
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Liner Projection<BR> (Earlier)
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Block<BR> (Later)
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Liner Projection<BR> (Later)
D379B, D398B, D399 GENERATOR SET ENGINES
Main Bearings
D379B, D398B, D399 GENERATOR SET ENGINES
Bearing Surface (Journal) For Main Bearings
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Oil Pressure Relief Valve
D379B, D398B & D399 GENRERATOR SET ENGINES
Crankshaft Main Bearings
D379B, D398B & D399 GENRERATOR SET ENGINES
Piston Cooling Tubes
D379B, D398B & D399 GENRERATOR SET ENGINES
Cylinder Liners
D379B, D398B & D399 GENRERATOR SET ENGINES
Camshaft Bearings
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/06
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/10
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Gasket Prevents Leakage{1201,1362,1380}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Gasket Changed For Cylinder Block Side Cover{1201,1362}
1984/05/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Engine News
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters
1980/01/09
Bolts Now Used Instead Of Studs To Hold Cylinder Heads
1982/05/12
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Specifications
Valve Rocker Arms And Lifters
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Head
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Head
D379B, D398B, D399 GENERATOR SET ENGINES
Valves
D379B, D398B, D399 GENERATOR SET ENGINES
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 0R-2669 AND 0R-2670 CYLINDER HEADS FROM DEALER PARTS STOCK
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
0R0828, 0R2171, 0R2172, 0R2578, 0R2588, 0R2593, 0R2669, And 0R2670 Remanufactured Cylinder Heads May Need To Be Removed From Dealer Parts Stock
Disassembly and Assembly
Precombustion Chambers
D379B, D398B & D399 GENRERATOR SET ENGINES
Rocker Shafts And Push Rods
D379B, D398B & D399 GENRERATOR SET ENGINES
Rocker Shafts
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Lifters
D379B, D398B & D399 GENRERATOR SET ENGINES
Cylinder Heads
D379B, D398B & D399 GENRERATOR SET ENGINES
Valves
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Guides
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Seat Inserts
D379B, D398B & D399 GENRERATOR SET ENGINES
Water Directors
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/10
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Specifications
Vibration Damper<BR> D398B
D379B, D398B, D399 GENERATOR SET ENGINES
Vibration Damper<BR> D399
D379B, D398B, D399 GENERATOR SET ENGINES
Vibration Damper<BR> (D379B Only)
D379B, D398B & D399 GENERATOR SET ENGINES ATTACHMENTS
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper (D398 and D399)
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Front Accessory Drive
D379B, D398B, D399 GENERATOR SET ENGINES
Disassembly and Assembly
Accessory Drive Housing
D379B, D398B & D399 GENRERATOR SET ENGINES
Accessory Drive Gears
D379B, D398B & D399 GENRERATOR SET ENGINES
Engine News
Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22
Specifications
Front Accessory Drive
D379B, D398B, D399 GENERATOR SET ENGINES
Disassembly and Assembly
Accessory Drive Housing
D379B, D398B & D399 GENRERATOR SET ENGINES
Accessory Drive Gears
D379B, D398B & D399 GENRERATOR SET ENGINES
Fan And Fan Drive
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Pressure Relief Fitting Added To Fan Drive Hub For More Positive Lubrication Of Front Bearing{1359}
1980/10/20
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Service Magazine
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Service Magazine
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Specifications
Flywheel
D379B, D398B, D399 GENERATOR SET ENGINES
Flywheel Housing
D379B, D398B, D399 GENERATOR SET ENGINES
Flywheel Runout
D379B, D398B, D399 GENERATOR SET ENGINES
Flywheel Housing Runout
D379B, D398B, D399 GENERATOR SET ENGINES
Flywheel Housing Bore
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
D379B, D398B & D399 GENRERATOR SET ENGINES
Flywheel Housing
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Specifications
Camshaft And Timing Gears
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Rear Timing Gears
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Specifications
Flywheel Housing
D379B, D398B, D399 GENERATOR SET ENGINES
Flywheel Housing Runout
D379B, D398B, D399 GENERATOR SET ENGINES
Flywheel Housing Bore
D379B, D398B, D399 GENERATOR SET ENGINES
Disassembly and Assembly
Crankshaft Rear Seal Ring And Thrower
D379B, D398B & D399 GENRERATOR SET ENGINES
Flywheel Housing
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Disassembly and Assembly
Crankshaft Front Seal Ring And Thrower
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
Engine News
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters
1980/01/09
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V3147 Main Bearing Wrench Now Available
1980/11/12
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Procedure To Stop Lubricant Leakage From Flexible Couplings
1981/07/15
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10
New Liner Seat Insert With O-Ring Seal Available
1982/02/10
New Crankshaft Wear Sleeve For Engines With Lip-Type Seals
1982/08/25
New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers
1982/09/22
Improved Valve Covers Used
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
New Crankshaft Seals Used
1985/06/01
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group
1990/07/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Installation Of 3N5620 Spacer Group Or 3N5573 Spacer Assembly{3252}
Installation Of 3N5620 Spacer Group Or 3N5573 Spacer Assembly{3252}
Special Handling Information And Installation Procedure For 4W2568, 4W2569, 4W2570 And 4W2571 Crankshaft Seal Conversion Groups And 4W2606 Or 4W2607 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information And Installation Procedure For 4W2568, 4W2569, 4W2570 And 4W2571 Crankshaft Seal Conversion Groups And 4W2606 Or 4W2607 Crankshaft Seal Group{1160, 1161, 1202}
Field Replacement Of 5L2662 And 6L8201 Counterweights On Crankshafts For 6.25 Bore Vee Engines{1202}
Field Replacement Of 5L2662 And 6L8201 Counterweights On Crankshafts For 6.25 Bore Vee Engines{1202}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Pressure Relief Fitting Added To Fan Drive Hub For More Positive Lubrication Of Front Bearing{1359}
1980/10/20
6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10
Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/15
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25
New Camshaft Has Improved Profile (Shape) Of Exhaust Cams{1210}
1982/02/15
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Improved Valve Cover Seal Used{1107}
1982/03/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/10
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Crankshaft Wear Sleeve For Engines With Lip-Type Seals{1160,1161}
1982/07/05
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Improved Valve Cover Seal{1107}
1982/10/18
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Improved Valve Covers Used{1107}
1983/01/17
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Gasket Prevents Leakage{1201,1362,1380}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Gasket Changed For Cylinder Block Side Cover{1201,1362}
1984/05/14
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
New Crankshaft Seals Used{1160,1161,1202}
1985/06/03
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Engine News
New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers
1982/09/22
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group
1990/07/01
Special Instruction
Installation of Flexible Mounting Groups{1152, 1353}
Installation of Flexible Mounting Groups{1152, 1353}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Service Magazine
New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers{1378}
1982/08/30
Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group{1152}
1990/06/18
Special Instruction
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Installation Of Engine Block, Support Rails And/Or Oil Pan Base Assembly{1154, 1201, 1302}
Disassembly and Assembly
Oil Pan Base
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Engine News
&quot;Off-Size&quot; Bearing Kits Available
1991/10/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life
1981/04/22
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
New Connecting Rod Bearings Used
1983/04/27
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Piston Pin Retainers May Be Incorrectly Installed in Certain Remanufactured Cylinder Packs{1225, 1239}
Piston Pin Retainers May Be Incorrectly Installed in Certain Remanufactured Cylinder Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Components May Be Assembled Incorrectly in the 0R-3037 Cylinder Pack As {1225}
Components May Be Assembled Incorrectly in the 0R-3037 Cylinder Pack As {1225}
Specifications
Pistons And Rings
D379B, D398B, D399 GENERATOR SET ENGINES
Connecting Rod
D379B, D398B, D399 GENERATOR SET ENGINES
Connecting Rod Bearings
D379B, D398B, D399 GENERATOR SET ENGINES
Bearing Surface (Journal) For Connecting Rods
D379B, D398B, D399 GENERATOR SET ENGINES
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3037 AND 0R-3285 CYLINDER PACKS, AND 0R-0921 CONNECTING RODS FROM DEALER PARTS STOCK
Disassembly and Assembly
Connecting Rod Bearings
D379B, D398B & D399 GENRERATOR SET ENGINES
Pistons
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/06
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Fan And Fan Drive
D379B, D398B & D399 GENRERATOR SET ENGINES
Vibration Damper (D398 and D399)
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Pressure Relief Fitting Added To Fan Drive Hub For More Positive Lubrication Of Front Bearing{1359}
1980/10/20
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
V-Belt Tension Chart
D379B, D398B, D399 GENERATOR SET ENGINES
Engine News
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters
1980/01/09
Improved Valve Cover Seal Used
1982/04/07
Bolts Now Used Instead Of Studs To Hold Cylinder Heads
1982/05/12
Improved Valve Cover Seal
1982/10/20
Improved Valve Covers Used
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Specifications
Valve Rocker Arms And Lifters
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Head
D379B, D398B, D399 GENERATOR SET ENGINES
Cylinder Head
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
REMANUFACTURED LIFTERS FOR THE D &amp; G SERIES ENGINES
REMANUFACTURED LIFTERS FOR THE D & G SERIES ENGINES
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Precombustion Chambers
D379B, D398B & D399 GENRERATOR SET ENGINES
Rocker Shafts And Push Rods
D379B, D398B & D399 GENRERATOR SET ENGINES
Rocker Shafts
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Lifters
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Covers
D379B, D398B & D399 GENRERATOR SET ENGINES
Cylinder Heads
D379B, D398B & D399 GENRERATOR SET ENGINES
Valves
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Guides
D379B, D398B & D399 GENRERATOR SET ENGINES
Valve Seat Inserts
D379B, D398B & D399 GENRERATOR SET ENGINES
Water Directors
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Improved Valve Cover Seal Used{1107}
1982/03/22
Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/10
Improved Valve Cover Seal{1107}
1982/10/18
Improved Valve Covers Used{1107}
1983/01/17
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Disassembly and Assembly
Flywheel Housing
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

Caterpillar D398BIN, Construction
80,000 
Caterpillar D398BIN, Construction
- Industrial engines
FOLEY EQUIPMENT COMPANY
1982 CAT D398B
USD $87,000 
1982 CAT D398B

Foley Equipment Company
Topeka Area, Kansas
CAT D398B
USD $35,000 
CAT D398B

Industrial Motor Power
Burbank, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.