AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5N4159 TURBOCHARGER GROUP 7N2515 TURBOCHARGER PARTS ARE SHOWN ON PAGE 89 AN ATTACHMENT D398B GEN SET ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
ELECTRICAL AND STARTING SYSTEM
HEATER GP
AIR INLET AND EXHAUST SYSTEM
MISCELLANEOUS INFORMATION
AFTERCOOLER GP

GEN SET ENGINE D398B GEN SET ENGINE 35Z
 D398B GENERATOR SET ENGINE 35Z00001-UP SEBP1290 D398B 35Z   (1980)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
6N-8464 TURBOCHARGER GP
TURBOCHARGER GP
6N-8463 TURBOCHARGER GP
TURBOCHARGER GP
5N-4159 TURBOCHARGER GP
TURBOCHARGER GP
7N-2515 TURBOCHARGER GP
SHIELD GP-TURBOCHARGER
3N-6866 SHIELD GP-TURBOCHARGER
SHIELD GP-TURBOCHARGER
3N-8056 SHIELD GP-TURBOCHARGER
 

#SEBP12900220
 

5N-4159: TURBOCHARGER GP

5N4159 TURBOCHARGER GROUP
7N2515 TURBOCHARGER PARTS ARE SHOWN ON PAGE 89
AN ATTACHMENT
c228513 SEBP1290
5N4159 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-2515 RY [2] TURBOCHARGER GROUP  
    (Separate Illustration)
2. 3N-3368 [1] PIPE  
3. 1B-5174 [1] PLUG  
4. 5L-4182 [1] EXTENSION  
5. 0S-1587 [12] BOLT  
  1B-5357 [12] NUT  
6. 5L-3773 [1] GASKET  
7. 6L-2961 [2] RING  
  6L-2960 [2] EXPANDER  
8. 5L-8856 [2] COUPLING  
9. 1S-4810 [2] GASKET  
10. 0S-1594 C [4] BOLT  
  5M-2894 [4] WASHER  
11. [1] TUBE ASSEM.  
12. 9H-6067 [2] SEAL  
13. 2N-2765 [8] BOLT  
  2N-2766 [8] LOCKNUT  
14. 1S-4295 [2] GASKET  
15. 3J-5389 [2] PLUG  
16. 5M-6213 [2] PLUG  
17. 6L-9217 [1] TUBE ASSEM.  
18. 5P-0599 [2] CLAMP  
19. 7L-7728 [2] HOSE  
20. 4J-8536 [2] CLAMP  
21. 6L-9541 [2] RING  
  6L-9542 [2] EXPANDER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12900221
 

7N-2515: TURBOCHARGER GP

7N2515 TURBOCHARGER GROUP-2 REQUIRED*R
PART OF 5N4159 TURBOCHARGER GROUP SHOWN ON PAGE 88
AN ATTACHMENT
c228514 SEBP1290
7N2515 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0111 R [1] CARTRIDGE GP-TURBOCHARGER  
  7N-0239 J [1] NUT-TURBO COMPRESSOR  
2. 9N-2378 [1] WHEEL-COMPRESSOR  
3. 5S-4556 [1] INSERT  
4. 5S-4546 J [1] RING-RETAINING  
5. 5P-5757 J [1] SEAL-O-RING  
6. 5S-4554 J [1] SEAL-O-RING  
7. 8S-9223 [1] BEARING-THRUST  
8. 5S-4550 [2] RING-THRUST  
9. 5S-4557 J [2] BEARING  
10. 4M-6983 J [4] RING-RETAINING  
11. 4N-9540 R [1] HOUSING AS-CENTER  
  5S-5199 C [1] PIN-GROOVE  
12. 4N-9556 [1] SHROUD  
13. 4M-6990 J [1] RING-SNAP  
14. 5S-4551 J [1] SLEEVE-OIL CONTROL  
15. 7N-2856 CJ [1] RING-SEAL  
16. 9S-8993 R [1] WHEEL AS-TURBINE  
17. 8H-3710 [2] SCREW-TAPPING  
18. 9S-1180 [1] NAMEPLATE  
19. 5S-4547 J [1] SLEEVE-SPACER  
20. 5S-4549 J [1] DEFLECTOR-OIL  
21. 8S-9222 J [1] SLEEVE  
22. 4M-8013 J [2] RING-PISTON  
23. 5S-4517 [1] CLAMP AS  
  7M-9918 [1] NUT-SELF LOCKING  
24. 9S-8996 R [1] HOUSING-TURBINE  
25. 5S-4558 [1] CLAMP AS-COMPRESSOR  
  7M-9918 [1] NUT-SELF LOCKING  
26. 4N-3755 [1] COVER-COMPRESSOR  
27. 5S-4545 [1] NAMEPLATE  
28. 4N-3955 [1] GASKET  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  6N-7245 [1] KIT-CARTRIDGE REPAIR  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12900222
 

3N-6866: SHIELD GP-TURBOCHARGER

3N6866 TURBOCHARGER SHIELD GROUP
AN ATTACHMENT
c350057 SEBP1290
3N6866 SHIELD GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5841 C [18] BOLT  
2. 3V-3308 [4] WASHER 2.05CM(.807IN.)O.D.  
    -OR-
  5M-2894 [4] WASHER 1.85CM(.728IN.)O.D.  
3. 0S-1591 [2] BOLT 3.81CM(2.50IN.)LG.  
4. 1A-2029 C [10] BOLT 2.86CM(1.125IN.)LG.  
5. 1D-4717 C [4] NUT  
6. 3N-6862 [1] PLATE AS-SHIELD (L.H.)  
7. 0S-1571 [2] BOLT 4.45CM(1.75IN.)LG.  
8. 2N-3385 C [18] NUT-CLIP  
9. 3N-3880 [1] BRACKET  
10. 3N-2020 [2] SHIELD AS  
11. 3H-6622 [5] BOLT 3.18CM(1.25IN.)LG.  
12. 2N-5241 [1] SHIELD AS-TURBOCHARGER  
13. 3N-6856 [1] PLATE AS-SHIELD  
14. 3N-2058 C [1] TUBE AS  
  1N-5337 [4] FASTENER  
15. 4B-1306 [4] SCREW-MACHINE  
  4B-4274 [4] WASHER  
16. 6F-7027 [8] BOLT  
  3B-4504 [8] LOCKWASHER  
  4B-5269 [8] WASHER-SCREW  
17. 8L-8578 [4] SUPPORT  
18. 2N-5914 [1] SHIELD-FRONT-RH (R.H. FRONT)  
  2N-5912 [1] SHIELD-REAR-RH (R.H. REAR)  
19. 3N-6859 [1] PLATE AS-SHIELD (R.H.)  
20. 3N-6851 [1] TUBE AS-INLET-RH  
21. 9S-7730 C [1] TEE-FLARED  
22. 2N-5223 [1] BRACKET  
23. 3N-3882 [1] SHIELD AS-CENTER  
24. 5N-3010 C [1] TUBE AS-INLET  
25. 3N-6865 [1] PLATE AS-SHIELD (L.H.)  
26. 2N-5911 [1] SHIELD-REAR-LH (L.H. REAR)  
  2N-5913 [1] SHIELD-FRONT-LH (R.H. FRONT)  
27. 5K-9244 C [5] ELBOW-FLARED  
28. 5K-9238 [2] CONNECTOR-FLARED  
29. 5N-3009 C [1] TUBE AS-INLET-LH  
30. 7K-2543 C [1] TEE-INVERTER FLARED  
31. 5N-3012 C [1] TUBE AS-INLET  
32. 7K-3377 [1] PIPE  
  0L-1143 C [1] BOLT  
33. 3B-4506 C [32] LOCKWASHER  
34. 5M-2894 C [34] WASHER  
35. 2N-8433 C [2] BRACE-AIR CLEANER  
36. 0L-1351 C [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12900223
 

3N-8056: SHIELD GP-TURBOCHARGER

3N8056 TURBOCHARGER SHIELD GROUP
PART OF 3N9127 ENGINE CONVERSION ARRANGEMENT LISTED ON PAGE 5
AN ATTACHMENT
c220118 SEBP1290
3N8056 SHIELD GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5842 H [19] BOLT 2.86 cm(1.125 in.) long  
2. 3B-4506 CH [31] LOCKWASHER  
3. 5K-9238 [2] CONNECTOR  
4. 3N-3880 [1] BRACKET  
5. 2N-3385 [14] NUT  
6. 3N-2020 [2] SHIELD ASSEM.  
7. 2N-5241 [1] SHIELD ASSEM.  
8. 3N-8072 [1] SHIELD ASSEM. (R.H.-Top)  
9. 8L-8578 [4] SUPPORT  
10. 4B-1306 [4] SCREW  
  4B-4274 [4] WASHER  
  1N-5337 [4] FASTENER  
11. 2N-5914 [1] SHIELD (R.H.-Front)  
  2N-5912 [1] SHIELD (R.H.-Rear)  
12. 3N-6851 [1] TUBE ASSEM.  
13. 3N-8081 [1] SHIELD ASSEM. (R.H.)  
14. 2N-5223 [1] BRACKET  
15. 3N-3882 [1] SHIELD ASSEM.  
16. 7K-2543 C [1] TEE  
17. 1D-4717 [2] NUT  
18. 3N-8064 [1] SHIELD ASSEM. (L.H.)  
19. 5K-9244 [6] ELBOW  
20. 5N-3010 C [1] TUBE ASSEM.  
21. 2N-5911 [1] SHIELD (L.H.-Rear)  
  2N-5913 [1] SHIELD (L.H.-Front)  
22. 6F-7027 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-5269 [8] WASHER  
23. 3N-8078 [1] SHIELD ASSEM. (L.H.-Top)  
24. 3N-2058 [2] TUBE ASSEM.  
25. 3H-6622 [8] BOLT 3.18 cm(1.25 in.) long  
26. 5N-3012 C [1] TUBE ASSEM.  
27. 5P-1184 C [1] PLUG  
28. 1A-2029 C [4] BOLT  
29. 5M-2894 C [19] WASHER  
30. 9S-7501 C [3] SPACER  
31. 3V-3308 CH [8] WASHER 2.05 cm(.807 in.) O.D.  
    -OR-
  5M-2894 CH [8] WASHER 1.85 cm(.728 in.) O.D.  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#SEBP12900224
 

7E-6247: HEATER GP-JACKET WATER

7E6247 HEATER GP-JACKET WATER
3 KW - 120/230 VOLT
AN ATTACHMENT
c602854 SEBP1290
7E6247 HEATER GP-JACKET WATER Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-7123 [1] THERMOSTAT AS (WATER)  
 

#SEBP12900225
 

5N-2176: MOUNTING GP-VALVE

5N2176 VALVE MOUNTING GROUP-TYPE 2
FOR USE WITH WATERCOOLED TURBO SHIELD WITH AIR CLEANER REMOVAL
AN ATTACHMENT
c321881 SEBP1290
5N2176 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-5964 [2] BOLT  
2. 0S-1571 [2] BOLT  
 

#SEBP12900226
 

5N-2176: MOUNTING GP-VALVE

5N2176 VALVE MOUNTING GROUP-TYPE 1
FOR USE WITH WATERCOOLED TURBO SHIELD WITH AIR CLEANER REMOVAL
AN ATTACHMENT
c179433 SEBP1290
5N2176 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-5964 [2] BOLT  
2. 6L-9438 [1] CHANNEL  
3. 0S-1590 [2] BOLT  
4. 1A-5183 [2] BOLT  
5. 0S-1571 [2] BOLT  
6. 1D-4717 [4] NUT  
7. 4B-4278 [16] WASHER (plain)  
  5N-2677 [8] WASHER (spring)  
 

#SEBP12900227
 

6L-6292: AFTERCOOLER GP-JACKET WATER

6L6292 JACKET WATER AFTERCOOLER GROUP
SERIAL NO. 35Z1 TO 35Z1532 INCLUSIVE
c228244 SEBP1290
6L6292 AFTERCOOLER GP-JACKET WATER Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6733 [6] SEAL  
2. 0S-1591 C [16] BOLT 38.10 mm(1.50 in.) long  
3. 5M-2894 C [30] WASHER  
4. 7H-7954 C [12] BOLT  
5. 6L-6482 [1] ELBOW  
6. 5H-7704 C [4] SEAL  
7. 6L-6484 [1] PIPE  
8. 4L-8337 C [4] SEAL  
9. 6L-6487 [4] GASKET  
10. 5L-7631 [4] CLAMP  
11. 6L-6293 [1] HOUSING  
12. 4F-0411 C [1] BOLT  
13. 1D-4717 [12] NUT  
14. 9F-4446 [4] SEAL  
15. 2H-2665 [8] SEAL  
16. 6L-8751 [4] CLIP  
17. 0S-1594 [6] BOLT 25.40 mm(1 in.) long  
18. 6L-6491 [1] PIPE  
19. 6L-6483 [1] PIPE  
20. 6L-6481 [2] ELBOW  
21. 5N-2691 C [1] ELBOW  
22. 2N-5693 [2] GASKET  
23. 6L-6494 [2] PLATE  
24. 4L-7904 [2] GASKET  
25. 6L-6294 [1] HOUSING  
26. 3N-4365 C [1] CORE ASSEM. (front)  
  3N-4366 C [1] CORE ASSEM. (rear)  
27. 6L-6489 [4] GASKET  
28. 5N-1841 C [4] FLANGE  
29. 6L-6490 [4] SLEEVE  
30. 5N-2692 C [1] ELBOW  
31. 6L-6493 [1] LOCK  
32. 1A-2029 [1] BOLT  
  1S-6908 [1] PLATE  
33. 9F-8999 C [2] BOLT 177.80 mm(7 in.) long  
    -or-
  4F-0411 C [2] BOLT 165.10 mm(6.50 in.) long  
34. 3J-5389 C [6] PLUG  
35. 5M-6214 PLUG  
36. 2A-4639 C [4] BOLT 41.28 mm(1.63 in.)long  
37. 5M-6213 C [2] PLUG  
38. 4B-4278 C [44] WASHER 10.32 mm(.406 in.)I.D.  
39. 5N-2677 C [22] WASHER 10.55 mm(.415 in.) I.D.  
40. 0S-1571 C [10] BOLT  
41. 2B-0858 C [1] PLUG  
  C   INDICATES CHANGE
 

#SEBP12900228
 

6L-6292: AFTERCOOLER GP-JACKET WATER

6L6292 JACKET WATER AFTERCOOLER GROUP
SERIAL NO. 35Z1533-UP
c321860 SEBP1290
6L6292 AFTERCOOLER GP-JACKET WATER Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6733 [6] SEAL-O-RING  
2. 0S-1591 [16] BOLT 38.10MM(1.50IN)LONG  
3. 5M-2894 C [06] WASHER  
4. 0L-1143 C [12] BOLT  
5. 6L-6482 [1] ELBOW-AIR OUTLET  
6. 5H-7704 [4] SEAL-O-RING  
7. 6L-6484 [1] PIPE-AIR TRANSFER  
8. 4L-8337 [4] SEAL-O-RING  
9. 6L-6487 [4] GASKET  
10. 5L-7631 [4] CLAMP  
11. 6L-6293 [1] HOUSING-TOP  
12. 4F-0411 [1] BOLT  
13. 1D-4717 C [16] NUT  
14. 9F-4446 [4] SEAL-O-RING  
15. 2H-2665 [8] SEAL-O-RING  
16. 6L-8751 [4] CLIP  
17. 0S-1594 [6] BOLT 25.40MM(1 IN.)LONG  
18. 6L-6491 [1] PIPE-CROSSOVER  
19. 6L-6483 [1] PIPE-AIR TRANSFER  
20. 6L-6481 [2] ELBOW-AIR INLET  
21. 5N-2691 [1] ELBOW-AIR TRANSFER  
22. 2N-5693 [2] GASKET-HOUSING  
23. 6L-6494 [2] PLATE  
24. 4L-7904 [2] GASKET-BASE  
25. 6L-6294 [1] HOUSING-BOTTOM  
26. 3N-4365 [1] CORE AS (FRONT)  
  3N-4366 [1] CORE AS (REAR)  
27. 6L-6489 [4] GASKET-FLANGE  
28. 5N-1841 [4] FLANGE-PIPE  
29. 6L-6490 [4] SLEEVE-O-RING  
30. 5N-2692 [1] ELBOW-AIR TRANSFER  
31. 6L-6493 [1] LOCK  
32. 1A-2029 [1] BOLT  
  1S-6908 [1] PLATE  
33. 9F-8999 [2] BOLT 177.80MM(7 IN.)LONG  
    -OR-
  4F-0411 [2] BOLT 165.10MM(6.50IN.)LG  
34. 3J-5389 [6] PLUG  
35. 5M-6214 [2] PLUG-PIPE  
36. 2A-4639 [4] BOLT 41.28MM(1.63IN)LONG  
37. 5M-6213 [2] PLUG  
38. 5B-9603 C [4] BOLT  
39. 5N-2677 C [30] WASHER-SPRING 10.55MM(.415IN)I.D.  
40. C [10] BOLT  
41. 2B-0858 [1] PLUG-PIPE  
42. 4W-5487 C [2] CHANNEL  
43. 0S-1590 C [4] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12900229
 

6L-6394: AFTERCOOLER GP-RAW WATER

6L6394 SEA WATER AFTERCOOLER GROUP-TYPE 1
AN ATTACHMENT
c228246 SEBP1290
6L6394 AFTERCOOLER GP-RAW WATER Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5H-6733 [6] SEAL  
2. 0S-1591 C [16] BOLT 3.81 cm(1.5 in.) long  
3. 5M-2894 C [30] WASHER  
4. 5M-6213 C [2] PLUG  
5. 6L-6482 [1] ELBOW  
6. 5H-7704 C [4] SEAL  
7. 6L-6484 [1] PIPE  
8. 4L-8337 C [4] SEAL  
9. 6L-6487 [4] GASKET  
10. 5L-7631 [4] CLAMP  
11. 6L-6293 [1] HOUSING  
12. 4F-0411 H [3] BOLT 16.51 cm(6.5 in.) long  
13. 1D-4717 [12] NUT  
14. 9F-4446 [4] SEAL  
15. 2H-2665 [8] SEAL  
16. 6L-8751 [4] CLIP  
17. 0S-1594 [6] BOLT 2.54 cm(1 in.) long  
18. 6L-8764 [1] PIPE  
19. 6L-6483 [1] PIPE  
20. 6L-6481 [2] ELBOW  
21. 5N-2691 C [1] ELBOW  
22. 2N-5693 [2] GASKET  
23. 6L-6494 [2] PLATE  
24. 4L-7904 [2] GASKET  
25. 6L-6294 [1] HOUSING  
26. 3N-4363 [1] CORE ASSEM.  
  3N-4364 [1] CORE ASSEM.  
27. 6L-6489 [4] GASKET  
28. 5N-1841 C [4] FLANGE  
29. 6L-8761 [4] SLEEVE  
30. 5N-2692 C [1] ELBOW  
31. 6L-6493 [1] LOCK  
32. 1A-2029 [1] BOLT  
33. 1S-6908 [1] PLATE  
34. 0S-1571 C [10] BOLT  
35. 3J-5389 C [6] PLUG  
36. 5M-6214 [2] PLUG  
37. 7H-7954 C [12] BOLT  
38. 4B-4278 C [44] WASHER (plated)  
  5N-2677 C [22] WASHER (spring)  
39. 9F-8999 CH [2] BOLT 17.78 cm(7 in.) long  
40. 2A-4639 C [4] BOLT  
41. 2B-0858 C [1] PLUG  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W724 Turbocharger Cartridge Repair Kit{1053}
2W724 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W725 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
D379B, D398B, D399 GENERATOR SET ENGINES
Turbocharger Lubrication Valve
D379B, D398B, D399 GENERATOR SET ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger Lubrication Valve
D379B, D398B & D399 GENRERATOR SET ENGINES
Turbocharger Heat Shield
D379B, D398B & D399 GENRERATOR SET ENGINES
Turbocharger
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog D398B :

TURBOCHARGER GP
6N-8463 TURBOCHARGER GP
TURBOCHARGER GP
6N-8464 TURBOCHARGER GP
TURBOCHARGER GP
6N-8455 TURBOCHARGER GP
TURBOCHARGER GP
3N-9163 TURBOCHARGER GP
TURBOCHARGER GP
3N-9163 TURBOCHARGER GP
TURBOCHARGER GP
6N-8458 TURBOCHARGER GP
TURBOCHARGER GP
8N-2955 TURBOCHARGER GP
TURBOCHARGER GP
8N-2954 TURBOCHARGER GP
TURBOCHARGER GP
7N-2515 TURBOCHARGER GP
SHIELD GP-TURBOCHARGER
3N-6866 SHIELD GP-TURBOCHARGER
SHIELD GP-TURBOCHARGER
3N-8056 SHIELD GP-TURBOCHARGER
HEATER GP-JACKET WATER
7E-6247 HEATER GP-JACKET WATER
MOUNTING GP-VALVE
5N-2176 MOUNTING GP-VALVE
MOUNTING GP-VALVE
5N-2176 MOUNTING GP-VALVE
AFTERCOOLER GP-JACKET WATER
6L-6292 AFTERCOOLER GP-JACKET WATER
AFTERCOOLER GP-JACKET WATER
6L-6292 AFTERCOOLER GP-JACKET WATER

Truck sale:

Caterpillar D398BIN, Construction
80,000 
Caterpillar D398BIN, Construction
- Industrial engines
FOLEY EQUIPMENT COMPANY
1982 CAT D398B
USD $87,000 
1982 CAT D398B

Foley Equipment Company
Topeka Area, Kansas
CAT D398B
USD $35,000 
CAT D398B

Industrial Motor Power
Burbank, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.