AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N4197 WOODWARD GOVERNOR GROUP-UG8L-PART 2 AN ATTACHMENT D398B GEN SET ENGINE


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-GOVERNOR
GOVERNOR GP
CONTROL GP-GOVERNOR

GEN SET ENGINE D398B GEN SET ENGINE 35Z
 D398B GENERATOR SET ENGINE 35Z00001-UP SEBP1290 D398B 35Z   (1980)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
7N-9922 GOVERNOR GP
GOVERNOR GP-WOODWARD
7N-4197 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-4197 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
GOVERNOR GP
7N-2702 GOVERNOR GP
 

#SEBP12900250
 

7N-4197: GOVERNOR GP-WOODWARD

7N4197 WOODWARD GOVERNOR GROUP-UG8L-PART 2
AN ATTACHMENT
c234519 SEBP1290
7N4197 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-2883 [1] COVER ASSEM.  
2. 3H-8076 H [1] PISTON ASSEM.  
3. 9F-9597 H [1] GEAR  
4. 9F-9596 H [1] DRIVE ASSEM.  
5. 9F-9626 [1] BUSHING  
6. 2F-6814 [1] PLUNGER  
7. 6L-5417 H [1] SPRING  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6L-3629 [1] KIT (hardware)  
  7N-9121 C [1] KIT (gasket)  
  6L-4299 [1] KIT (repair)  
  C   INDICATES CHANGE
 

#SEBP12900251
 

7N-9923: GOVERNOR GP-WOODWARD

7N9923 WOODWARD GOVERNOR GROUP-UG8D-PART 1
8N5069 CONTROLET PARTS ARE SHOWN ON PAGE 108
c229696 SEBP1290
7N9923 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-6778 [1] PLATE  
2. 2F-6761 [1] SPRING  
3. 8N-6155 [1] ROD ASSEM.  
4. 7N-8325 [1] COVER ASSEM.  
5. 2F-6814 [1] PLUNGER  
6. 9F-9626 [1] BUSHING  
7. 3L-2402 [1] FITTING  
8. 8N-5119 [1] SPRING ASSEM.  
9. 2F-6693 [1] LEVER  
10. 2F-6691 [1] PIN  
11. 2F-6763 [1] PIN  
12. 2F-6713 [3] COTTER  
13. 2F-6738 [1] LINK  
14. 2F-6746 [1] WASHER  
15. 9F-9706 [1] GEAR  
16. 8N-5123 [1] BULLHEAD ASSEM.  
17. 7N-6287 [1] CASE ASSEM.  
18. 6L-4249 [1] BASE ASSEM.  
    (Includes)
19. 2F-6674 [1] SHAFT  
20. 6L-4252 [1] PANEL ASSEM.  
    (Includes)
21. 2F-6766 [1] GEAR ASSEM.  
22. 7N-9119 [1] GEAR ASSEM.  
23. 8N-5069 Y [1] CONTROLET ASSEM.  
    (Separate Illustration)
24. 7N-8444 [1] GAUGE  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6L-4299 [1] KIT (repair)  
    (Includes valve assemblies, pins, plugs, bearings, springs, studs, cover assembly, pistons, knobs, ring,set screws, washer and seat)
  6L-3629 [1] KIT (hardware)  
    (Includes pointers, pins, rings, laminations, washers, nuts, "O" rings, lockwashers, seals, cotter pins, lockwire & screws)
  7N-9121 [1] KIT (gasket)  
  8N-4904 [1] KIT (pc board conversion)  
    (Includes board assem., decal, resistor assem., screws & installation instructions)
  Y   SEPARATE ILLUSTRATION
 

#SEBP12900252
 

7N-9923: GOVERNOR GP-WOODWARD

7N9923 WOODWARD GOVERNOR GROUP-UG8D-PART 2
c221842 SEBP1290
7N9923 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-6778 [1] PLATE  
2. 2F-6761 [1] SPRING  
3. 5H-6475 [1] ROD ASSEM.  
    (Includes)
  5H-6476 [1] ROD & PIN ASSEM.  
4. 7N-7578 [1] LOCKNUT  
5. 2F-6686 [1] BEARING  
6. 2F-6689 [1] SPRING  
7. 8N-5119 [1] SPRING ASSEM.  
8. 3L-7235 [1] SCREW ASSEM.  
    (Includes)
9. 2F-6693 [1] LEVER  
10. 2F-6691 [1] PIN  
11. 2F-6763 [1] PIN  
12. 2F-6713 [3] COTTER  
13. 2F-6738 [1] LINK  
14. 2F-6746 [1] WASHER  
15. 9F-9706 [1] GEAR  
16. 8N-5123 [1] BALLHEAD ASSEM.  
17. 7N-6287 [1] CASE ASSEM.  
18. 6L-4249 [1] BASE ASSEM.  
    (Includes)
19. 2F-6674 [1] SHAFT  
20. 6L-4252 [1] PANEL ASSEM.  
    (Includes)
21. 2F-6766 [1] GEAR ASSEM.  
22. 7N-9119 [1] GEAR ASSEM.  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6L-3629 [1] KIT (hardware)  
    (Includes pointers, pins, rings, laminations, washers, nuts, "O" rings, lockwashers, seals cotter pins, lockwire & screws)
  7N-9121 [1] KIT (gasket)  
  6L-4299 [1] KIT (repair)  
    (Includes valve assemblies, pins, plugs, bearings, springs, studs, cover assembly, pistons, knobs, ring, sets screws, washer and seat)
 

#SEBP12900253
 

7N-2702: GOVERNOR GP

7N2702 WOODWARD GOVERNOR GROUP-UG8D-110 VOLT-PART 1 OF 2
AN ATTACHMENT
c301753 SEBP1290
7N2702 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8444 [1] GAUGE (oil level)  
2. 3L-2402 [1] FITTING  
3. 7N-8108 [1] COVER ASSEM.  
4. 9F-9626 [1] BUSHING  
5. 2F-6814 [1] PLUNGER  
6. 6L-4304 [1] CONTROLET ASSEM.  
    (Includes)
  3L-6745 [1] CONTROLET ASSEM.  
    (Includes)
7. 8F-9914 [1] CONTROLET  
  9F-9635 [2] WASHER  
8. 9F-2247 [4] PLUG  
9. 2F-6707 [2] VALVE ASSEM.  
10. 9F-9630 [4] RING  
11. 2F-6818 [2] PISTON  
12. [2] SPRING  
13. 3L-6746 [1] SEAT  
14. 3H-8076 [1] PISTON ASSEM.  
15. 9F-9597 [1] GEAR (17 teeth)  
16. 9F-9596 [1] DRIVE ASSEM.  
17. 5H-6500 [1] LEVER ASSEM.  
    (Includes)
18. 2N-1922 [1] PIN  
  2F-6713 [1] COTTER PIN  
  4F-2317 [1] WASHER  
19. 7L-8458 [1] SPRING  
20. 5H-6503 [1] LEVER  
21. 6L-5417 [1] SPRING  
 

#SEBP12900254
 

7N-2702: GOVERNOR GP

7N2702 WOODWARD GOVERNOR GROUP-UG8D-110 VOLT-PART 2 OF 2
AN ATTACHMENT
c301754 SEBP1290
7N2702 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-6778 [1] PLATE  
2. 2F-6761 [1] SPRING  
3. 3L-7235 [1] SCREW ASSEM.  
    (Includes)
  2F-6693 [1] LEVER  
  2F-6691 [1] PIN  
  [1] SCREW  
4. 3N-3366 [1] SPRING ASSEM.  
5. 5H-6475 [1] ROD ASSEM.  
    (Includes)
  5H-6476 [1] ROD & PIN ASSEM.  
6. 7N-7578 [1] LOCKNUT  
7. 2F-6686 [1] BEARING  
8. 2F-6689 [1] SPRING  
9. 3N-3685 [1] BALLHEAD ASSEM.  
10. 7N-6287 [1] CASE ASSEM.  
11. 6L-4249 [1] BASE ASSEM.  
    (Includes)
12. 2F-6674 [1] SHAFT  
13. 6L-4252 [1] PANEL ASSEM.  
    (Includes)
14. 2F-6766 [1] GEAR ASSEM.  
15. 7N-9119 [1] GEAR ASSEM.  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6L-3629 [1] KIT (hardware)  
    (Includes pointers, pins, rings, laminations, washers, nuts, "O" rings, lockwashers, seals cotter pins, lockwire & screws)
  7N-9121 [1] KIT (gasket)  
  8N-4904 C [1] KIT (PC Board Conversion)  
    (Includes Board As., Decal, Resistor As., Screws and Installation Instructions)
  C   INDICATES CHANGE
 

#SEBP12900255
 

8N-5069: CONTROLET AS

8N5069 CONTROLET ASSEMBLY
PART OF 7N9922 & 7N9923 WOODWARD GOVERNOR GROUPS SHOWN ON PAGES 103 & 106
c477385 SEBP1290
8N5069 CONTROLET AS Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5121 [1] PISTON AS  
2. 9F-9597 [1] GEAR-BALL HEAD DRIVE (17 TEETH)  
3. 8N-5120 [1] SPRING  
4. 9F-9596 [1] DRIVE AS  
5. 5H-6500 [1] LEVER AS  
6. 2N-1922 [1] PIN  
  2F-6713 [1] PIN-COTTER  
  4F-2317 [1] WASHER  
7. 7L-8458 [1] SPRING  
8. 5H-6503 [1] LEVER-SHUTDOWN  
9. 8N-5122 [1] CONTROLET AS  
10. 2F-6707 [2] VALVE AS-CHECK  
11. 9F-9630 [4] RING-RETAINING  
12. 2F-6818 [2] PISTON  
13. 2F-6802 [2] SPRING  
14. 3L-6746 [1] SEAT-SPRING  
15. 8N-5124 [1] CONTROLET  
  9F-9635 [1] WASHER  
16. 9F-2247 [4] PLUG  
 

#SEBP12900256
 

8N-1730: CONTROL GP-GOVERNOR

8N1730 GOVERNOR CONTROL GROUP-LOAD SHARING
AN ATTACHMENT
c554896 SEBP1290
8N1730 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-8923 Y [1] CONTROL AS-GOVERNOR  
2. 9G-8010 CB [1] SWITCH AS (OIL PRESS.)  
  6V-8376 [2] SCREW-MACHINE  
  9B-7233 [2] LOCKWASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12900257
 

7N-4195: CONTROL GP-GOVERNOR

7N4195 GOVERNOR CONTROL GROUP-UG8L
AN ATTACHMENT
c216690 SEBP1290
7N4195 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-9303 [1] LEVER  
2. 3B-4505 [1] LOCKWASHER  
3. 2H-3738 [1] BOLT  
 

#SEBP12900258
 

5N-1997: SHIELD GP-GOVERNOR

5N1997 GOVERNOR SHIELD GROUP
c514785 SEBP1290
5N1997 SHIELD GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT (1/2-13X2IN)  
  1D-4719 [2] NUT (1/2-13 THD)  
  5P-8245 [4] WASHER (3MM THK)  
2. 5N-1994 [1] STRAP-MOUNTING-LH  
3. 0L-1351 [6] BOLT (3/8-16X.875IN)  
  1D-4717 [6] NUT (3/8-16 THD)  
4. 5M-2894 [16] WASHER (2.5MM THK)  
5. 5N-1995 [1] STRAP-MOUNTING-RH  
6. 5N-1996 [1] SHIELD-GOVERNOR  
7. 0S-1594 B [4] BOLT (3/8-16X1IN)  
8. 8L-5423 B [1] SPACER  
9. 5N-1993 [2] BRACKET  
10. 3N-1379 B [1] SPACER  
  B   USE AS REQUIRED
 

#SEBP12900259
 

8N-1731: CONTROL GP-GOVERNOR

8N1731 GOVERNOR CONTROL GROUP-STANDBY
AN ATTACHMENT
c514191 SEBP1290
8N1731 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D398B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5392 [1] CONTROL AS-GOVERNOR  
2. 9G-8010 CB [1] SWITCH AS (OIL PRESS.)  
  6V-8376 [2] SCREW-MACHINE  
  9B-7233 [2] LOCKWASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Woodward Governor Available For Parallel Generator Applications
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21
Use The Correct Governor For Parallel Applications
1982/02/24
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block
1983/02/16
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Actuator Cylinder Used In Air Shutoff
1983/08/17
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Use 7N2702 Governor In Parallel Engine Applications
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines
1985/08/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Current 7N2703 UG8 Governor Group Has Larger Range Of Droop Adjustment
1993/09/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 5N1997 Governor Shield Group{1264}
Installation Of 5N1997 Governor Shield Group{1264}
Specifications
Fuel Transfer Pump
D379B, D398B, D399 GENERATOR SET ENGINES
Fuel Pump And Governor Drive
D379B, D398B, D399 GENERATOR SET ENGINES
Governor<BR> (Woodward UG-8 Dial)
D379B, D398B, D399 GENERATOR SET ENGINES
Governor Drive Upper Housing<BR> (Woodward Governor)
D379B, D398B, D399 GENERATOR SET ENGINES
Governor<BR> (Woodward UG-8 Dial &amp; Lever)
D379B, D398B & D399 GENERATOR SET ENGINES ATTACHMENTS
Governor<BR> (Woodward EG-3P)
D379B, D398B & D399 GENERATOR SET ENGINES ATTACHMENTS
Governor Drive Upper Housing<BR> (Woodward Governor)
D379B, D398B & D399 GENERATOR SET ENGINES ATTACHMENTS
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Disassembly and Assembly
Fuel Transfer Pump
D379B, D398B & D399 GENRERATOR SET ENGINES
Governor (Woodward UG-8)
D379B, D398B & D399 GENRERATOR SET ENGINES
Governor Drive Housing (Upper) (Woodward UG-8)
D379B, D398B & D399 GENRERATOR SET ENGINES
Governor
D379B, D398B & D399 GENRERATOR SET ENGINES
Fuel Injection Pumps
D379B, D398B & D399 GENRERATOR SET ENGINES
Fuel Injection Pump Housing, Governor And Governor Drive
D379B, D398B & D399 GENRERATOR SET ENGINES
Governor Drive Housing
D379B, D398B & D399 GENRERATOR SET ENGINES
Service Magazine
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
Woodward Governor Available For Parallel Generator Applications{1289,1264}
1981/04/06
Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure{1289,1264,1265}
1981/09/28
Use The Correct Governor For Parallel Applications{1289,1264}
1982/02/22
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Sealant Used Between The Fuel Injection Pump/Governor Drive Housing And Cylinder Block{1288}
1983/01/17
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Use 7N2702 Governor In Parallel Generator Set Applications{1289,1264}
1984/02/27
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Preferred Engine Timing Procedures{1250,1286,1290,1292}
1984/11/05
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Fuel Pump And Governor Drive Shaft Has Pressure Lubrication For Splines{1288}
1985/08/05
Repair Kits Available For Air Actuator Used In Governor Control Groups{1250}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

Caterpillar Parts SIS Catalog D398B :

GOVERNOR GP-WOODWARD
7N-4197 GOVERNOR GP-WOODWARD
GOVERNOR GP
7N-9922 GOVERNOR GP
SWITCH GP
7N-4196 SWITCH GP
MAGNETIC PICKUP GP
5N-2522 MAGNETIC PICKUP GP
FLANGE GP-EXHAUST
2W-7852 FLANGE GP-EXHAUST
FLANGE GP-EXHAUST
6L-3641 FLANGE GP-EXHAUST
FITTING GP-EXHAUST
2W-7848 FITTING GP-EXHAUST
FLANGE GP-EXHAUST
2W-7871 FLANGE GP-EXHAUST
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
GOVERNOR GP-WOODWARD
7N-9923 GOVERNOR GP-WOODWARD
GOVERNOR GP
7N-2702 GOVERNOR GP
GOVERNOR GP
7N-2702 GOVERNOR GP
CONTROLET AS
8N-5069 CONTROLET AS
CONTROL GP-GOVERNOR
8N-1730 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7N-4195 CONTROL GP-GOVERNOR
SHIELD GP-GOVERNOR
5N-1997 SHIELD GP-GOVERNOR

Truck sale:

Caterpillar D398BIN, Construction
80,000 
Caterpillar D398BIN, Construction
- Industrial engines
FOLEY EQUIPMENT COMPANY
1982 CAT D398B
USD $87,000 
1982 CAT D398B

Foley Equipment Company
Topeka Area, Kansas
CAT D398B
USD $35,000 
CAT D398B

Industrial Motor Power
Burbank, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.