5N7278 ENGINE ARRANGEMENT NOTE: WHEN ORDERING PARTS GIVE ARRANGEMENT AND SERIAL NUMBER D399 GEN SET ENGINE

Part No	Qty	Parts name


8L-5025 Y	[1]	AFTERCOOLER CONNECTIONS GROUP
7L-6549 Y	[1]	AIR CLEANER GROUP
2N-3322 Y	[2]	AIR CLEANER GAUGE GROUP
3N-0961 Y	[1]	BREATHER GROUP
6L-8396 Y	[1]	CAMSHAFT GROUP
6L-2868 Y	[16]	CONNECTING ROD AND PISTON GROUP
6L-8357 Y	[1]	CRANKSHAFT GROUP
		SERIAL NO. 36Z1 TO 36Z1920 INCLUSIVE
4W-7720 Y	[1]	CRANKSHAFT GROUP
		SERIAL NO. 36Z1921-UP
3N-2679 Y	[1]	CYLINDER BLOCK AND COVERS GROUP
3N-2682 Y	[1]	CYLINDER HEAD & VALVE MECHANISM GROUP
6L-9646 Y	[1]	FLYWHEEL GROUP
7N-8867 Y	[1]	FUEL FILTER GROUP
5N-6973 Y	[1]	FUEL INJECTION LINES GROUP
7N-8599 Y	[1]	FUEL PRIMING PUMP GROUP
5N-5632 Y	[1]	FUEL TRANSFER PUMP GROUP
6L-8626 Y	[1]	FUEL PUMP HOUSING GROUP
3N-2684 Y	[1]	FRONT ACCESSORY DRIVE GROUP
7N-9923 Y	[1]	GOVERNOR GROUP--UG8D
3N-2686 Y	[1]	GOVERNOR & FUEL PUMP DRIVE GROUP
5N-1997 Y	[1]	GOVERNOR SHIELD GROUP
5N-6976 Y	[1]	INSTRUMENT PANEL GROUP
6L-6292 Y	[1]	JACKET WATER AFTERCOOLER GROUP
3N-0846 Y	[1]	LIFTING GROUP
8L-4264 Y	[1]	MANUAL SHUT-OFF GROUP
3N-1325 Y	[1]	OIL COOLER AND LINES GROUP
2N-0885 Y	[1]	OIL FILTER GROUP
6L-9445 Y	[1]	OIL PAN BASE GROUP
5N-3802 Y	[1]	OIL PUMP GROUP
		SERIAL NO. 3671 TO 367916 INCLUSIVE
		- OR -
5N-4413 Y	[1]	OIL PUMP GROUP
		SERIAL NO. 36Z917--UP
3N-2644 Y	[1]	PRELUBRICATION PUMP MOUNTING GROUP
3N-2976 Y	[1]	SAFETY SHUT-OFF GROUP
3N-1589 Y	[1]	SERVICE METER AND TACHOMETER DRIVE
		GROUP
6L-9289 Y	[1]	TURBOCHARGER GROUP--REAR VIEW
3N-1445 Y	[1]	WATER LINES GROUP
6L-8983 RY	[1]	WATER PUMP GROUP
3N-1725 Y	[1]	WATER SHIELDED MANIFOLD GROUP
5N-2423 Y	[1]	WOODWARD GOVERNOR DRIVE GROUP--DIESEL
7N-4196 Y	[1]	WOODWARD GOVERNOR SYNCRONIZING MOTOR
		SWITCH GROUP
3N-6356 Y	[1]	VIBRATION DAMPER GROUP
		SERIAL NO. 36Z1 TO 36Z1920 INCLUSIVE
4W-2561 Y	[1]	VIBRATION DAMPER GROUP
		SERIAL NO. 36Z1921-UP

		NOTE: REFER TO INDEX FOR PAGE LOCATION
		OF GASKET KITS
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP12910002

3N-8989: CONVERSION AR-ENGINE

CONVERSION AR-ENGINE

3N8989 ENGINE CONVERSION ARRANGEMENT
PROVIDES WATER COOLER EXHAUST MANIFOLD AND WATER COOLED TURBOCHARGER
SHIELD AN ATTACHMENT

SEBP12910002 SEBP1291

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name


3N-1698 Y	[1]	MANIFOLD GROUP

3N-8056 Y	[1]	SHIELD GROUP

6N-8460 RY	[2]	TURBOCHARGER GROUP

7M-7273	[2]	GASKET

2N-8433	[2]	BRACE

3H-5841	[2]	BOLT

3B-4506	[2]	LOCKWASHER

0S-1590	[1]	BOLT

2N-2765	[1]	BOLT

5M-2894	[1]	WASHER
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP12910003

3N-8189: CONVERSION AR-ENGINE

CONVERSION AR-ENGINE

3N8189 ENGINE CONVERSION ARRANGEMENT-EBULLIENT COOLING
AN ATTACHMENT

SEBP12910003 SEBP1291

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name


4L-8800 RY	[1]	WATER PUMP GROUP

6L-9015 Y	[1]	AFTERCOOLER CONNECTION GROUP

2N-5040 Y	[1]	MANIFOLD GROUP

3N-8095 Y	[1]	OIL COOLER LINES GROUP

6N-8460 RY	[2]	TURBOCHARGER GROUP

6L-9163	[1]	TUBE ASSEMBLY

7M-7273	[2]	GASKET--TURBOCHARGER

0S-1585	[3]	BOLT
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP12910004

3N-2679: CYLINDER BLOCK & COVERS GP

CYLINDER BLOCK & COVERS GP

3N2679 CYLINDER BLOCK AND COVERS GROUP-PART 1 OF 2

c233161 SEBP1291

3N2679 CYLINDER BLOCK & COVERS GP Parts scheme

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
1A-2223	[32]	DOWEL
5L-2894	[9]	BEARING
		(Parts of Block Assem. 3N6996)
9S-1366	[2]	BOLT
3B-4508	[2]	LOCKWASHER
5N-3275 C	[1]	GASKET
0L-1351	[4]	BOLT
3B-4506	[8]	LOCKWASHER
5F-9303	[2]	COVER
1F-3131	[2]	GASKET
3B-0551	[2]	PLUG
1A-0168	[6]	BOLT
3B-4508	[6]	LOCKWASHER
9M-7269	[2]	BOLT
3B-4508	[2]	LOCKWASHER
8L-4857	[7]	COVER
1F-4419	[7]	GASKET
0L-2061	[2]	DOWEL. (875" LONG)
2B-2994	[2]	DOWEL. (150" LONG)
		(Parts of Block Assem. 3n6996)
7F-7669	[1]	GASKET
7F-7670	[1]	COVER
0L-1351	[4]	BOLT
4L-4653	[2]	PLATE
1A-8537	[8]	BOLT
3B-4510	[14]	LOCKWASHER
8S-9092	[6]	BOLT
2N-7224	[2]	CAP ASSEM.
		(Part of Block Assem 3N6996)
1A-9759	[4]	DOWEL
		(PART OF 2N7224 ASSEM.)
3N-6996 C	[1]	BLOCK ASSEM.
2A-3348	[1]	DOWEL
6B-6863 C	[8]	PIN
		(Parts of Block Assem. 3N6996)
2N-5120	[18]	STUD
3S-1356	[18]	NUT
		(Part of Block Assem. 3N6996)
4L-6788	[128]	STUD
		(Part of Block Assem. 3N6996)
4L-7586	[1]	GASKET
0S-1588	[12]	BOLT
3B-4506	[12]	LOCKWASHER
2N-7194	[7]	CAP
		(Part of Block Assem. 3N6996)
4L-3395	[2]	DOWEL
		(Part of Block Assem. 3N6996)
C		INDICATES CHANGE

#SEBP12910005

3N-2679: CYLINDER BLOCK & COVERS GP

CYLINDER BLOCK & COVERS GP

3N2679 CYLINDER BLOCK AND COVERS GROUP-PART 2 OF 2

c229399 SEBP1291

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8N-4708 C	[16]	BAND
1A-1135	[4]	BOLT
2A-4462	[2]	LOCK
6L-8989	[1]	COVER
1F-4419	[1]	GASKET
0S-0509	[81]	BOLT (.75" LONG)
3B-4506	[81]	LOCKWASHER
6L-7815	[48]	SEAL
8N-9174 C	[16]	LINER
1A-9759	[8]	DOWEL
2N-4518	[1]	PLATE ASSEM.
8F-8145 C	[1]	FLANGE
1F-3131	[1]	GASKET
1B-5174	[1]	PLUG
0S-1588	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1F-4418	[8]	COVER
1F-9223	[8]	GASKET
5F-0304	[1]	PLUG
5B-8932	[1]	GASKET
0S-0509 C	[116]	BOLT
3B-4506 C	[116]	LOCKWASHER
6L-2787	[1]	HOUSING
		(FLYWHEEL)
C		INDICATES CHANGE

#SEBP12910006

6L-8357: CRANKSHAFT GP

CRANKSHAFT GP

6L8357 CRANKSHAFT GROUP
SERIAL NO. 36Z1 TO 36Z1920 INCLUSIVE

c177649 SEBP1291

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1594	[12]	BOLT
3B-4506	[12]	LOCKWASHER
7L-2534	[1]	RING
3N-7326 C	[1]	THROWER
5P-3476 C	[8]	BOLT
		(Part of 3N2958 Assem.)
8N-7764 C	[9]	BEARING
		(Standard)
8N-7765 AB		BEARING-MAIN (0.63-U.S.)
8N-7766 AB		BEARING-MAIN (1.27-U.S.)
8N-7767 AB		BEARING-MAIN (0.63-O.S.)
8N-7768 AB		BEARING-MAIN (0.63-U.S.-0.63-O.S.)
5L-2093	[1]	GASKET
8L-3972	[1]	BAFFLE
0T-0857	[8]	BOLT
7B-0537	[8]	DOWEL
5L-2683	[16]	BOLT
7B-0537	[16]	DOWEL
		(Parts of 3N2958 Assem.)
8L-3972	[1]	BAFFLE
5L-2093	[1]	GASKET
3N-2958 RC	[1]	CRANKSHAFT ASSEM.
3N-3234	[2]	RING
3N-7327 C	[1]	THROWER
7L-2534	[1]	RING
0S-1594	[12]	BOLT
3B-4506	[12]	LOCKWASHER
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#SEBP12910007

4W-7720: CRANKSHAFT GP

CRANKSHAFT GP

4W7720 CRANKSHAFT GROUP
SERIAL NO. 36Z1921-UP

c321908 SEBP1291

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-2567	[1]	ADAPTER-SEAL
2.	8N-7764	[9]	BEARING-MAIN
	8N-7765 AB		BEARING-MAIN (0.63-U.S.)
	8N-7766 AB		BEARING-MAIN (1.27-U.S.)
	8N-7767 AB		BEARING-MAIN (0.63-O.S.)
	8N-7768 AB		BEARING-MAIN (0.63-U.S.-0.63-O.S.)
3.	4W-2566	[1]	ADAPTER-SEAL
4.	0S-1594	[24]	BOLT
5.	5L-2093	[2]	GASKET
6.	4W-2606	[1]	SEAL GP-CRANKSHAFT
7.	4W-7718 R	[1]	CRANKSHAFT AS
8.	6L-8201 B	[4]	COUNTERWEIGHT
9.	7B-0537	[24]	DOWEL
10.	0T-0857 B	[8]	BOLT
11.	5L-2683	[16]	BOLT
12.	5L-2662	[8]	COUNTERWEIGHT
13.	5P-3476	[8]	BOLT-SOCKET HEAD
14.	4W-2607	[1]	SEAL GP-CRANKSHAFT
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMFG PART MAY BE AVAILABLE

#SEBP12910008

4W-2568: SEAL GP-CRANKSHAFT CONVERSION

SEAL GP-CRANKSHAFT CONVERSION

4W2568 CRANKSHAFT CONVERSION SEAL GROUP-FRONT-STANDARD ROTATION
WHEN USEING THIS GROUP TO CONVERT AN ENGINE A NEW FRONT ADAPTER
MUST ALSO BE USED
FIELD INSTALLATION

c331652 SEBP1291

4W2568 SEAL GP-CRANKSHAFT CONVERSION Parts scheme

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-2566	[1]	ADAPTER-SEAL
2.	5L-2093	[1]	GASKET
3.	4W-2606	[1]	SEAL GP-CRANKSHAFT

#SEBP12910009

4W-2571: SEAL GP-CRANKSHAFT CONVERSION

SEAL GP-CRANKSHAFT CONVERSION

4W2571 CRANKSHAFT CONVERSION SEAL GROUP-REAR-OPPOSITE ROTATION
FIELD INSTALLATION

c331741 SEBP1291

4W2571 SEAL GP-CRANKSHAFT CONVERSION Parts scheme

For full view, you need register

Parts for your D399 GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-2567	[1]	ADAPTER-SEAL
2.	5L-2093	[1]	GASKET
3.	4W-2606	[1]	SEAL GP-CRANKSHAFT

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Engine Replacement
1982/04/07

Reference Chart for Engine Improvements
1982/11/10

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18

New Engine News Format {0374}
1999/12/01

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

How Is Service Information Accessed / Used {1000}
2009/04/27

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
D379B, D398B, D399 GENERATOR SET ENGINES

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group{0374,1000}
1982/08/30

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Remove Shackle Assembly When The Generator Is Put Into Operation{7002,4450}
1984/03/12

Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines{1000}
1984/10/08

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Generator Sets Wired For Use With Customer-Supplied Switch Gear; Do Not Run Without Switch Gear{7002,7400}
1987/01/19

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Additional Vibration Limits For Generator Set Engines {7002}
1993/09/13

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D399 :

3N-8989 CONVERSION AR-ENGINE

3N-8189 CONVERSION AR-ENGINE

3N-2679 CYLINDER BLOCK & COVERS GP

6L-8357 CRANKSHAFT GP

4W-7720 CRANKSHAFT GP

4W-2568 SEAL GP-CRANKSHAFT CONVERSION

4W-2571 SEAL GP-CRANKSHAFT CONVERSION

Truck sale:

Caterpillar D399
- Industrial engines
WHEELER MACHINERY CO.

130.000

Caterpillar D399, Industriemaschinen, Bau-Und Bergbauausrüstung
- Industrial engines
LOUISIANA CAT POWER SYSTEMS

USD $12,000

CAT D399

L&K Machinery

USD $8,995

CAT D399

Surplus Heavy Equipment & Parts
Long Branch, New Jersey

CAT D399

Yoder & Frey Auctioneers
Ashland, Ohio