7T2817 TILT CYLINDER ARRANGEMENT 6S BULLDOZER SERIAL NO. 95E13900-UP FOR USE WITH 7 ROLLER TRACK ROLLER FRAME AN ATTACHMENT D6D

Pos.	Part No	Qty	Parts name
1.	0S-1626	[4]	BOLT 3.81CM(1.5IN)LG
	1A-0458	[4]	BOLT 4.45CM(1.75IN)LG
	5P-8248	[8]	WASHER-HARD
2.	5J-7897	[1]	GUARD AS-RH
	5J-7898	[1]	GUARD AS-LH
3.	1P-4576	[20]	FLANGE
4.	0S-1588	[40]	BOLT
5.	5M-2894	[46]	WASHER
6.	7S-2594	[4]	HOSE AS
			(EACH INCLUDES)
	9S-0671 BG		HOSE
7.	3S-9454	[1]	STEM AS-COLLET (STRAIGHT)
8.	5S-9593	[1]	STEM AS-COLLET (90 DEG)
9.	3S-8606	[2]	SLEEVE
10.	5F-1678	[10]	SEAL-O-RING
11.	5S-8714	[2]	TUBE AS
12.	5S-8718	[1]	TUBE AS
13.	5S-8709	[1]	GUARD-CENTER
14.	9S-1366	[6]	BOLT
15.	5P-8245	[6]	WASHER
16.	5S-8765	[1]	GUARD-RH
17.	5S-8711	[6]	BLOCK
18.	5S-8712	[6]	BLOCK
19.	0S-1571	[7]	BOLT
20.	030-8188	[2]	CONNECTOR-FLARED
	3K-0360	[2]	SEAL-O-RING
	2P-6588	[2]	HEAD-ADAPTER
21.	5S-8766	[1]	GUARD-LH
22.	2P-7958	[2]	HOSE AS
23.	5P-1075	[1]	WASHER-HARD
24.	7K-3215	[1]	BOSS
25.	6K-9194	[2]	ELBOW
26.	1H-5948	[2]	CLAMP-TUBE
27.	8D-7729	[1]	BOSS
	B		USE AS REQUIRED
	G		ORDER BY THE INCH

#SEBP12930414

2P-6053: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

2P6053 TILT CYLINDER LINES GROUP
PART OF 8J3930 TILT CYLINDER ARRANGEMENT LISTED ON PAGE 185
AN ATTACHMENT

c225138 SEBP1293

2P6053 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-4576	[ 4]	FLANGE
2.	0S-1588	[ 8]	BOLT
3.	4J-5267	[ 2]	SEAL
4.	0S-1621	[ 2]	BOLT
5.	5P-8245 C	[ 6]	WASHER
6.	6J-0499	[ 2]	LUG
7.	2P-8492	[ 1]	GUARD
8.	2P-7959	[ 2]	HOSE ASSEM.
			(Each Includes)
	2P-5943 C H		HOSE 121 in. (307.3 cm)
9.	4S-5414	[ 2]	SLEEVE
10.	8S-6417	[ 2]	COUPLING ASSEM.
11.	005-4362	[ 2]	ELBOW
	3K-0360	[ 2]	SEAL
12.	2P-6588	[ 2]	HEAD
13.	0S-1595 C	[ 4]	BOLT
	4B-4280 C	[ 4]	WASHER
14.	6J-0333 C	[ 1]	GUARD ASSEM.
15.	5M-2894 C	[ 8]	WASHER
			ORDER BY THE INCH
			INDICATES CHANGE

#SEBP12930415

2P-6054: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

2P6054 TILT CYLINDER LINES GROUP
PART OF 8J3931 TILT CYLINDER ARRANGEMENT LISTED ON PAGE 186
AN ATTACHMENT

c230333 SEBP1293

2P6054 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1626 C	[ 4]	BOLT 3.81 cm(1.5 in.) long
	1A-0458 C	[ 4]	BOLT 4.45 cm(1.75 in.) long
	5P-8248 C	[ 8]	WASHER
2.	5J-7897 C	[ 1]	GUARD ASSEM. (L. H.)
	5J-7898 C	[ 1]	GUARD ASSEM. (R. H.)
3.	1P-4576	[ 20]	FLANGE
4.	0S-1588 C	[ 40]	BOLT
5.	5M-2894 C	[ 46]	WASHER
6.	7S-2594	[ 4]	HOSE ASSEM.
			(Each Includes)
	5P-0179 H		HOSE 80.26 cm(31.6 in.)
7.	3S-9454	[ 1]	STEM ASSEM. (straight)
8.	5S-9593	[ 1]	STEM ASSEM. (90 degrees)
9.	3S-8606	[ 2]	SLEEVE
10.	4J-5267 C	[ 8]	SEAL
11.	5S-8714	[ 2]	TUBE ASSEM.
12.	5S-8718	[ 1]	TUBE ASSEM.
13.	5S-8709	[ 1]	GUARD
14.	9S-1366	[ 6]	BOLT
15.	5P-8245 C	[ 6]	WASHER
16.	5S-8765	[ 1]	GUARD (R. H.)
17.	5S-8711	[ 6]	BLOCK
18.	5S-8712	[ 6]	BLOCK
19.	0S-1571	[ 6]	BOLT
20.	030-8188 C	[ 2]	CONNECTOR
	3K-0360 C	[ 2]	SEAL
	2P-6588	[ 2]	HEAD
21.	5S-8766	[ 1]	GUARD (L. H.)
22.	2P-8073	[ 2]	HOSE ASSEM.
			(Each Includes)
	5P-0178 H		HOSE 196.6 cm(77.4 in.)
23.	4S-5414	[ 2]	SLEEVE
24.	8S-6417	[ 1]	COUPLING ASSEM. (straight)
25.	8S-6393	[ 1]	COUPLING ASSEM. (90 degrees)
			ORDER BY THE CENTIMETER
			INDICATES CHANGE

#SEBP12930416

9P-0477: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

9P0477 TILT CYLINDER LINES GROUP-TYPE 1
PART OF 9P7022, 9P2417 HYDRAULIC CONTROLS
AN ATTACHMENT

c180194 SEBP1293

9P0477 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-6806 C	[1]	CONNECTOR
2.	6D-7573	[3]	CLIP
3.	2P-7958	[2]	HOSE ASSEM.
			(Each Includes)
	2P-5943 CG		HOSE 98.4 in. (250 cm)
4.	4S-5414	[2]	SLEEVE
5.	8S-6417	[2]	COUPLING ASSEM.
6.	0S-1587 C	[1]	BOLT
7.	2B-7092	[1]	SPACER
8.	3B-4508 C	[1]	LOCKWASHER
9.	8S-4950	[2]	CAP
10.	7K-4129	[2]	UNION
11.	1J-7647	[1]	CLAMP
12.	1J-7468	[1]	CLAMP
13.	1D-4719 C	[1]	NUT
14.	5P-1075 C	[2]	LOCKWASHER
15.	7G-3323 C	[1]	BRACKET
16.	5P-8245 C	[1]	WASHER
17.	0S-1594 C	[2]	BOLT
18.	1D-4717 C	[1]	NUT
19.	4J-0520	[1]	SEAL
20.	7G-9494 C	[1]	ELBOW
21.	0L-1352	[1]	BOLT
22.	7S-1912	[1]	CLIP
23.	5M-2894 C	[1]	WASHER
24.	1P-1376	[1]	CONNECTOR
	3J-1907	[2]	SEAL
25.	0S-1621 C	[1]	BOLT
	5P-8245 C	[2]	WASHER
26.	8M-2530 C	[2]	BOLT
27.	6K-0806 C	[2]	STRAP
	C		INDICATES CHANGE
	G		ORDER BY THE INCH

#SEBP12930417

9P-0477: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

9P0477 TILT CYLINDER LINES GROUP-TYPE 2
PART OF 9P7022, 9P2417 HYDRAULIC CONTROLS
AN ATTACHMENT

c503855 SEBP1293

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	030-7943 C	[1]	ELBOW
2.	6D-7573 C	[2]	CLIP
3.	4V-0616 CI	[2]	HOSE AS
4.	6T-3662 C	[1]	TUBE AS
5.	6T-3663 C	[1]	TUBE AS
6.	8T-8919	[1]	BOLT
7.	2B-7092	[1]	SPACER
8.	3B-4508	[1]	LOCKWASHER
9.	8S-4950	[2]	CAP
10.	7K-4129	[2]	UNION-FLARED
11.	1J-7647	[1]	CLAMP
12.	1J-7468	[1]	CLAMP
13.	6V-8188	[1]	NUT
14.	5P-1075 C	[6]	WASHER-HARD
15.	7G-3323	[1]	BRACKET
16.	8T-4223 C	[5]	WASHER
17.	4L-6454 C	[3]	BOLT
18.	6V-8801 C	[3]	NUT
19.	8T-7211	[1]	SEAL
20.	6T-2710 C	[1]	BRACKET
21.	8T-8915	[1]	BOLT
22.	7S-1912	[1]	CLIP
23.	8T-4896	[1]	WASHER-HARD
24.	5P-2424 C	[2]	BOLT
25.	5P-2228	[1]	BOLT
26.	8M-2530	[2]	BOLT-12 POINT HEAD
27.	6K-0806	[2]	STRAP-CABLE
28.	030-8189 C	[1]	CONNECTOR
	3D-2824 C	[1]	SEAL-O-RING
29.	3R-2704 C	[2]	UNION-FLARED
30.	7X-0288 C	[1]	BOLT
31.	5S-8995 C	[1]	ANGLE
32.	3K-0360 C	[1]	SEAL-O-RING
33.	7T-8753 C	[1]	ELBOW
34.	5S-7382	[1]	BOLT
35.	5P-9298 C	[1]	CLIP (SHORT)
	6V-7383 C	[1]	CLIP (LONG)
	C		CHANGE FROM PREVIOUS TYPE
	I		SEE HOSE FABRICATION GUIDE

#SEBP12930418

7T-2299: LINES GP-TILT CYLINDER

LINES GP-TILT CYLINDER

7T2299 TILT CYLINDER LINES GROUP
6S BULLDOZER SERIAL NO. 95E13900-UP
FOR USE WITH 7 ROLLER TRACK ROLLER FRAME
PART OF 7T2817 TILT CYLINDER AR
AN ATTACHMENT

c332570 SEBP1293

7T2299 LINES GP-TILT CYLINDER Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-4576	[4]	FLANGE
2.	0S-1588	[8]	BOLT
3.	4J-5267	[2]	SEAL
4.	0S-1621	[2]	BOLT
5.	5P-8245	[6]	WASHER (SMALL)
6.	3Y-5405	[2]	RUBBER
7.	2P-8492	[1]	GUARD
8.	3G-1024	[2]	HOSE AS
9.	6H-3609	[2]	BOSS
10.	5M-2894	[8]	WASHER
11.	005-4362	[2]	ELBOW
	3K-0360	[2]	SEAL-O-RING
12.	2P-6588	[2]	HEAD-ADAPTER
13.	0S-1595	[4]	BOLT
	4B-4280	[4]	WASHER (LARGE)
14.	6J-0333	[1]	GUARD AS

#SEBP12930419

9J-2697: MOUNTING GP-CYLINDER

MOUNTING GP-CYLINDER

9J2697 MOUNTING GP-CYLINDER-TYPE 1
PART OF 3G5331, 3G5332, 9J2689 BULLDOZER ARS
AN ATTACHMENT

c230323 SEBP1293

9J2697 MOUNTING GP-CYLINDER Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0T-0772	[2]	BOLT
	1D-4718	[2]	NUT
2.	9J-1903	[2]	LINK ASSEM.
3.	3B-8485	[2]	FITTING
4.	2J-6305	[2]	SEAL
5.	4J-6326	[8]	BEARING
6.	5J-6161	[2]	PIN
7.	6J-8504	[1]	TUBE ASSEM.
			(Includes)
8.	2J-6316	[2]	BEARING
9.	2J-6306	[2]	BEARING
10.	0T-0199	[2]	PLUG
11.	0S-1595	[8]	BOLT
12.	3B-4508	[16]	LOCKWASHER
13.	5J-6162	[2]	PLATE
	8J-7067	[2]	GASKET
14.	1D-4600	[8]	BOLT
	4K-0367	[8]	NUT
	2S-5658	[8]	WASHER
15.	5J-6156	[2]	YOKE
16.	4J-6327	[4]	CAP
17.	3B-8489	[4]	FITTING
18.	2B-0947	[8]	BOLT
19.	2H-3788	[2]	NUT
	4B-4280	[2]	WASHER

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Cylinders
153 & 163 HYDRAULIC CONTROL

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Bench Test Procedures

Service Magazine

Center Pin Failures: New Cylinder Has A Check Ball{5104}
1982/03/08

New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10

Improved Head For Ripper Lift Cylinder Group Uses New Rod Wear Ring And Seals{7562,5352}
1996/07/29

New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6D :

8J-7050 LINES GP-RIPPER

8J-3930 CYLINDER AR-TILT

8P-4398 LINES GP-RIPPER

9P-8114 LINES GP-BULLDOZER

9P-8113 LINES GP-BULLDOZER

8J-3931 CYLINDER AR-TILT

7T-9462 CYLINDER AR-TILT

7T-9463 LINES GP-TILT CYLINDER

2P-6053 LINES GP-TILT CYLINDER

2P-6054 LINES GP-TILT CYLINDER

9P-0477 LINES GP-TILT CYLINDER

7T-2299 LINES GP-TILT CYLINDER

Truck sale:

Caterpillar D6D
- Crawler dozers
HOLT CAT

Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.

25,000

Caterpillar D6D, Crawler dozers, Construction

59,000

Caterpillar D6D, Crawler dozers, Construction

22,417

Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT