AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9J2697 MOUNTING GP-CYLINDER-TYPE 2 PART OF 3G5331, 3G5332 BULLDOZER ARS AN ATTACHMENT D6D TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
LINKAGE GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 03X
 D6D TRACTOR DIRECT DRIVE 03X01009-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1293 D6D 03X   (1977)

HYDRAULIC SYSTEM

CYLINDER GP
7T-9462 CYLINDER AR-TILT
MOUNTING GP-CYLINDER
9J-2697 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
9J-2697 MOUNTING GP-CYLINDER
CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
 

#SEBP12930420
 

9J-2697: MOUNTING GP-CYLINDER

9J2697 MOUNTING GP-CYLINDER-TYPE 2
PART OF 3G5331, 3G5332 BULLDOZER ARS
AN ATTACHMENT
c180776 SEBP1293
9J2697 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0772 [2] BOLT  
  1D-4718 [2] NUT  
2. 9J-1903 [2] LINK ASSEM.  
3. 3B-8485 [2] FITTING  
4. 2J-6305 [2] SEAL  
5. 4J-6326 C [4] BEARING  
6. 5J-6161 [2] PIN  
7. 6J-8504 [1] TUBE ASSEM.  
    (Includes)
8. 2J-6316 [2] BEARING  
9. 2J-6306 [2] BEARING  
10. 0T-0199 [2] PLUG  
11. 0S-1595 [8] BOLT  
12. 3B-4508 [16] LOCKWASHER  
13. 5J-6162 [2] PLATE  
  8J-7067 [2] GASKET  
14. 1D-4600 [8] BOLT  
  4K-0367 [8] NUT  
  2S-5658 [8] WASHER  
15. 5J-6156 [2] YOKE  
16. 4J-6327 [4] CAP  
17. 3B-8489 [4] FITTING  
18. 2B-0947 [8] BOLT  
19. 2H-3788 [2] NUT  
  4B-4280 [2] WASHER  
  C   INDICATES CHANGE
 

#SEBP12930421
 

8J-6868: CYLINDER GP-LIFT

8J6868 LIFT CYLINDER GROUP-(CHG. 2,4)-101.6 MM (4") BORE X 1045.9 MM
(41.18") STROKE-2 REQUIRED. PART OF 1U2546, 4T8429, 7T2848, 7T2849
BULLDOZER ARS
AN ATTACHMENT
c523318 SEBP1293
8J6868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 C [1] PISTON AS  
2. 5J-0964 [1] SEAL-U-CUP  
3. 2K-6830 [1] RING-BACK-UP  
4. 1H-8128 [1] SEAL-O-RING  
5. 5J-3620 [1] SEAL-RING  
6. 5P-1839 C [1] BOLT-SELF LOCKING  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING-WEAR  
8. 7J-8295 [1] HEAD  
9. 8J-6867 R [1] CYLINDER AS  
10. 4J-6374 [2] BEARING-SLEEVE  
11. 3B-2968 C [4] BOLT  
  5P-8248 C [4] WASHER-HARD  
12. 7J-6461 R [1] CROWN  
13. 8J-6866 R [1] ROD AS-PISTON  
14. 1K-6982 [1] SEAL-LIP TYPE  
15. 3J-6559 C [1] CAP-BEARING  
16. 3J-6572 C [12] SHIM .5MM(.02IN)THK  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12930422
 

7J-8302: CYLINDER GP

7J8302 HYDRAULIC CYLINDER GROUP-(CHANGE 0-11)-102 MM (4 IN.) BORE X 8
(34 IN.) STROKE-2 REQUIRED. PART OF 3G5331, 3G5333, 3G5332, 3G5334,
9J2689 BULLDOZER ARS
AN ATTACHMENT
c316852 SEBP1293
7J8302 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 [1] PISTON AS  
2. 9J-2009 [1] PLUNGER  
3. 5J-5402 C [1] SEAL AS  
  5J-5400 C [1] SEAL  
4. 9J-2008 [1] PLUNGER  
5. 8J-9282 [2] SPACER  
6. 9J-2010 [2] INSERT-PISTON  
7. 5P-1839 [1] BOLT-SELF LOCKING  
  8J-4359 [1] WASHER  
8. 1M-1571 [1] RING-WEAR  
9. 7J-8301 C [1] CYL AS-HYD OS  
10. 4T-0421 [1] TRUNNION AS  
11. 4J-6374 [2] BEARING-SLEEVE  
12. 7J-6461 R [1] CROWN  
13. 7J-8294 C [1] ROD AS-PISTON  
14. 1K-6982 [1] SEAL-LIP TYPE  
15. 5J-0964 [1] SEAL-U-CUP  
16. 2K-6830 R [1] RING-BACK-UP  
17. 1H-8128 [1] SEAL-O-RING  
18. 5J-3620 [1] SEAL-RING  
19. 7J-8295 [1] HEAD  
20. 3J-6559 [1] CAP-BEARING  
  3J-6572 [12] SHIM .5MM(.02IN)THK  
21. 3B-2968 [4] BOLT  
  5P-8248 C [4] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12930423
 

2J-1402: CYLINDER GP-HYDRAULIC

2J1402 HYDRAULIC CYLINDER GROUP-(CHANGE 22)-BLADE TILT-165 MM (6.5 IN.)
BORE X 127 MM (5 IN.) STROKE
PART OF 8J3930, 7T2817 TILT CYLINDERS
AN ATTACHMENT
c339720 SEBP1293
2J1402 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-0337 R [1] CYLINDER ASSEM.  
    (Includes)
2. 2J-8489 [1] BEARING  
3. 2K-0044 [1] ELBOW  
4. 3J-9704 [1] PISTON  
5. 2J-0564 [1] NUT  
6. 3J-9703 [1] RING  
7. 5J-4991 [1] SEAL ASSEM.  
8. 2J-1424 R [1] ROD ASSEM.  
    (Includes)
9. 3F-6612 [1] CAP  
10. 3F-6492 [1] BALLSTUD  
11. 2K-4472 [1] SEAL  
  2K-4473 [1] RING  
12. 3G-9912 C [1] HEAD  
13. 1D-4709 [4] BOLT  
  5P-8250 C [4] WASHER  
14. 5J-8300 C [1] SEAL  
15. 2J-1411 [1] SEAL  
16. 6J-6915 C [1] SEAL  
17. 0S-1571 [4] BOLT  
18. 4J-0519 [1] SEAL  
19. 3B-4506 C [1] LOCKWASHER  
20. 0S-1594 [1] BOLT  
  1D-4717 [1] NUT  
  4B-4278 [1] WASHER  
21. 8J-5818 [1] TUBE ASSEM.  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12930424
 

1U-3495: CYLINDER GP-TILT

1U3495 TILT CYLINDER GROUP-(CHANGE 0)-R.H. & L.H.-152 MM (6 IN.) BORE X
102 MM (4 IN.) STROKE-2 REQUIRED. PART OF 8J3931, 7T9462 TILT CYLINDER
ARRANGEMENT. AN ATTACHMENT
c179777 SEBP1293
1U3495 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6559 [2] CAP  
2. 3J-6572 [24] SHIM  
3. 3B-2968 [8] BOLT  
4. 5P-8248 [8] WASHER  
5. 1U-3496 [1] CYLINDER ASSEM.  
    (Includes)
  7J-7816 C [1] YOKE ASSEM.  
6. 2J-3243 [1] RETAINER  
7. 5F-1678 [1] SEAL  
8. 5J-7893 [1] TUBE ASSEM.  
9. 0T-0055 [4] BOLT  
10. 5M-2894 [10] WASHER  
11. 4J-9981 [1] PISTON  
12. 0S-1594 [1] BOLT  
  1D-4717 [1] NUT  
13. 4J-4500 [1] WASHER  
14. 5J-5731 [1] NUT  
15. 7J-3169 R [1] ROD ASSEM.  
16. 0S-1571 [4] BOLT  
17. 1K-6982 [1] SEAL  
18. 4F-8421 [6] SHIM  
19. 4F-8420 [1] PACKING  
20. 5J-7889 [1] HEAD  
21. 1D-4627 [4] BOLT  
  5P-8249 [4] WASHER  
22. 5H-3252 [1] SEAL  
  2K-3258 [1] RING  
23. 5J-0014 [1] RING  
24. 5J-4989 [2] SEAL ASSEM.  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12930425
 

8J-1779: CYLINDER GP-RIPPER LIFT

8J1779 CYLINDER GROUP-(CHANGE 0-6)-RIPPER-185 MM (7.25 IN.) BORE X
305 MM (12 IN.) STROKE. PART OF 8J7592 RIPPER ARRANGEMENT LISTED ON PAGE
229. AN ATTACHMENT
c228958 SEBP1293
8J1779 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] NUT-SELF LOCKING  
2. 8J-1772 [1] PISTON  
3. 1J-2674 [1] RING-WEAR  
4. 5J-4993 [1] SEAL AS  
5. 2K-2939 [1] SEAL-O-RING  
6. 8J-1770 [1] HEAD  
7. 2K-2940 C [1] RING-BACK-UP  
8. 5J-3620 [1] SEAL-RING  
9. 5J-0964 [1] SEAL-U-CUP  
10. 1K-6982 [1] SEAL-LIP TYPE  
11. 8J-1777 R [1] ROD AS  
12. 2K-4507 [1] BEARING-SLEEVE  
13. 1J-2814 [4] BOLT  
14. 3B-4518 [4] LOCKWASHER  
15. 4F-7391 [1] SEAL-O-RING  
16. 0S-1571 C [4] BOLT  
17. 3B-4506 [6] LOCKWASHER  
18. 8J-1769 [1] MANIFOLD AS  
19. 2K-1285 [1] CONNECTION  
20. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
21. 8J-1778 R [1] CYLINDER AS  
22. 1J-2675 [1] JUNCTION BLOCK  
23. 2K-4507 [1] BEARING-SLEEVE  
24. 1P-4577 [2] FLANGE-HALF  
25. 0S-1588 [4] BOLT  
26. 5H-4019 [1] COVER  
27. 5M-2894 C [4] WASHER  
28. 4J-0520 C [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12930426
 

8P-5038: LINKAGE GP-IMPLEMENT

8P5038 BULLDOZER IMPLEMENT LINKAGE GROUP-TYPE 1
PART OF 9P7023, 9P2414 HYDRAULIC CONTROLS
AN ATTACHMENT
c229313 SEBP1293
8P5038 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 0S-1571 [2] BOLT  
4. 1D-4717 [4] NUT  
5. 9P-0468 [1] CLAMP  
6. 8P-5048 [1] LEVER ASSEM.  
7. 8P-7352 [1] SEAL  
8. 0S-1591 [1] BOLT  
9. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW  
10. 6P-5208 [1] GUIDE  
11. 2J-7295 [1] SPRING  
12. 6P-5205 [1] BRACKET ASSEM.  
    (Includes)
  9F-5647 [2] BEARING  
13. 4D-4065 [1] ROD END  
14. 1B-4205 [3] NUT  
15. 8P-3391 [1] ROD ASSEM.  
    (Includes)
16. 1B-4205 [1] NUT  
17. 2M-8340 [1] ROD END  
18. 0S-0175 [3] PIN  
  3B-4617 [3] COTTER PIN  
19. 8P-2496 [1] LEVER  
20. 6F-7010 [2] ROD END  
21. 8P-5327 [1] ROD ASSEM.  
    (Includes)
22. 1B-4205 [1] NUT  
23. 4D-4065 [1] ROD END  
24. 8P-5324 [1] SPACER  
25. 8P-5322 [1] BRACKET ASSEM.  
26. 7B-3235 [3] BOLT  
27. 3B-4508 [5] LOCKWASHER  
28. 0S-1622 C [1] BOLT  
  1K-6872 [1] LOCKNUT  
29. 1D-4719 [3] NUT  
30. 9G-8854 C [1] BELLCRANK  
31. 0S-0509 [1] BOLT  
  3K-8909 [1] LOCKWASHER  
  8M-4069 [1] WASHER  
32. 6D-3787 C [2] BEARING  
33. 0S-1587 [1] BOLT  
34. 8P-5325 [1] ROD ASSEM.  
    (Includes)
  4D-4065 [1] ROD END  
  1B-4205 [1] NUT  
35. 0S-1590 [1] BOLT  
36. 3B-4506 [5] LOCKWASHER  
37. 0S-1588 [4] BOLT  
  4B-4278 [4] WASHER  
38. 0S-1573 [1] BOLT  
39. 8P-2483 [1] LEVER  
40. 3P-3942 [1] SHAFT  
  1B-8704 [2] KEY  
41. 5S-9704 [1] SHAFT  
  1D-4720 [1] NUT  
  3B-4510 [1] LOCKWASHER  
42. 2H-3855 [1] BOLT  
  1J-8965 [1] WASHER  
43. 6D-5974 C [2] BEARING  
44. 3B-8489 C [1] FITTING  
  5P-8166 C [1] FILM  
    (Mounted on R.H. Operator's Platform)
  C   INDICATES CHANGE
 

#SEBP12930427
 

8P-5038: LINKAGE GP-IMPLEMENT

8P5038 LINKAGE GP-IMPLEMENT-TYPE 2
PART OF 9P7023, 9P2414 HYDRAULIC CONTROLS
AN ATTACHMENT
c466310 SEBP1293
8P5038 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 0S-1571 [2] BOLT  
4. 1D-4717 [4] NUT  
5. 9P-0468 [1] CLAMP  
6. 8P-5048 [1] LEVER AS  
7. 8P-7352 [1] SEAL-DOMED  
8. 0S-1591 [1] BOLT  
9. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW-MACHINE  
10. 6P-5208 [1] GUIDE-CONTROL  
11. 2J-7295 [1] SPRING  
12. 6P-5205 [1] BRACKET AS  
  9F-5647 [2] BEARING  
13. 4D-4065 [1] ROD END-BEARING  
14. 1B-4205 [3] NUT  
15. 8P-3391 [1] ROD AS  
16. 1B-4205 [1] NUT  
17. 2M-8340 [1] END-ROD  
18. 0S-0175 [3] PIN-CLEVIS  
  3B-4617 [3] COTTER  
19. 8P-2496 [1] LEVER  
20. 6F-7010 [2] END-ROD  
21. 8P-5327 [1] ROD AS  
22. 1B-4205 [1] NUT  
23. 4D-4065 [1] ROD END-BEARING  
24. 8P-5324 [1] SPACER  
25. 8P-5322 [1] BRACKET AS  
26. 7B-3235 [3] BOLT  
27. 5P-8245 C [4] WASHER  
28. 1A-1460 [1] BOLT  
  1K-6872 [1] LOCKNUT  
29. 1D-4719 [3] NUT  
30. 9G-8854 [1] BELLCRANK  
31. 0S-1594 C [1] BOLT  
  8M-9124 C [1] WASHER (SMALL)  
  8M-4069 [1] WASHER (LARGE)  
32. 6D-3787 [2] BEARING  
33. 0S-1587 [1] BOLT  
34. 8P-5325 [1] ROD AS  
  4D-4065 [1] ROD END-BEARING  
  1B-4205 [1] NUT  
35. 0S-1590 [1] BOLT  
36. 5M-2894 C [5] WASHER  
37. 0S-1588 [4] BOLT  
38. 8S-9089 C [1] BOLT  
39. 8P-2483 [1] LEVER  
40. 3P-3942 [1] SHAFT  
  1B-8704 [2] KEY-WOODRUFF  
41. 5S-9704 [1] SHAFT  
  3K-2889 C [1] LOCKNUT  
  5P-8247 C [1] WASHER-HARD  
42. 0S-1585 C [1] BOLT  
  1J-8965 [1] WASHER 3.8CM(1.5IN.)O.D.  
  1S-4305 C [1] WASHER 2.54M(1 IN.)O.D.  
43. 6D-5974 C [2] BEARING-ROLLER  
44. 3B-8489 C [1] FITTING-GREASE  
45. 5V-6103 C [1] SPACER  
   
  2Y-4370 CF [1] FILM (HAND CONTROL INSTR.-  
    LOCATED IN OPERATOR'S
    COMPARTMENT)
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP12930428
 

8P-5039: LINKAGE GP-IMPLEMENT

8P5039 BULLDOZER AND TILT IMPLEMENT LINKAGE GROUP-TYPE 1
PART OF 9P7022, 9P2417 HYDRAULIC CONTROL
AN ATTACHMENT
c229314 SEBP1293
8P5039 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 6P-5205 [1] BRACKET ASSEM.  
    (Includes)
  9F-5647 [2] BEARING  
4. 8P-7352 [1] SEAL  
5. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW  
6. 9P-0468 [1] CLAMP  
7. 8P-2481 [1] LEVER ASSEM.  
    (Includes)
  9F-5647 [2] BEARING  
8. 2J-7295 [1] SPRING  
9. 6P-5208 [1] GUIDE  
10. 0S-1591 [1] BOLT  
11. 1D-4717 [3] NUT  
12. 5B-9079 [2] NUT  
13. 5J-5315 [2] ROD END  
14. 2L-6267 [2] LOCKNUT  
15. 4D-4065 [1] ROD END  
16. 1B-4205 [4] NUT  
17. 8P-3391 [1] ROD ASSEM.  
    (Includes)
18. 1B-4205 [1] NUT  
19. 2M-8340 [1] ROD END  
20. 8P-2479 [1] ROD  
21. 8P-2496 [1] LEVER  
22. 6D-3787 C [4] BEARING  
23. 0S-0175 [5] PIN  
  3B-4617 [5] COTTER PIN  
24. 8P-2495 [1] LEVER  
25. 6F-7010 [3] ROD END  
26. 8P-5327 [1] ROD ASSEM.  
    (Includes)
  1B-4205 [1] NUT  
  4D-4065 [1] ROD END  
27. 8P-5329 [1] ROD ASSEM.  
    (Includes)
  1B-4205 [1] NUT  
  4D-4065 [1] ROD END  
28. 7B-3235 [3] BOLT  
29. 3B-4508 [6] LOCKWASHER  
30. 8P-5322 [1] BRACKET ASSEM.  
31. 9G-8854 C [2] BELLCRANK  
32. 0L-1351 [1] BOLT  
  8M-4069 [1] WASHER  
33. 1D-4719 [5] NUT  
34. 5J-5326 [1] WASHER  
35. 0S-1587 [2] BOLT  
36. 0S-1571 [2] BOLT  
37. 3P-3937 [1] SHAFT  
38. 8P-5325 [1] ROD ASSEM.  
  4D-4065 [1] ROD END  
  1B-4205 [1] NUT  
39. 8P-5331 [1] ROD ASSEM.  
  1B-4205 [2] NUT  
  4D-4065 [1] ROD END  
40. 2M-8340 [1] ROD END  
41. 0S-1588 C [4] BOLT  
  4B-4278 [4] WASHER  
42. 3B-4506 [5] LOCKWASHER  
43. 0S-1573 [1] BOLT  
44. 8P-2483 [1] LEVER  
45. 5S-9704 [2] SHAFT  
  1D-4720 [2] NUT  
  3B-4510 [2] LOCKWASHER  
46. 2H-3855 [2] BOLT  
  1J-8965 [2] WASHER  
47. 3P-3935 [1] SHAFT ASSEM.  
  1B-8704 [1] KEY  
48. 7L-0811 [1] PIN  
49. 0S-1622 [2] BOLT  
50. 1K-6872 [2] LOCKNUT  
51. 6D-5974 C [4] BEARING  
52. 3B-8489 C [2] FITTING  
  5P-8161 C [1] FILM (not shown)  
    (Mounted on R.H. Operator's Platform)
  C   INDICATES CHANGE
 

#SEBP12930429
 

8P-5039: LINKAGE GP-IMPLEMENT

8P5039 BULLDOZER AND TILT IMPLEMENT LINKAGE GROUP-TYPE 2
PART OF 9P7022, 9P2417 HYDRAULIC CONTROLS
AN ATTACHMENT
c330416 SEBP1293
8P5039 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 6P-5205 [1] BRACKET AS.  
  9F-5647 [2] BEARING  
4. 8P-7352 [1] SEAL  
5. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW  
6. 9P-0468 [1] CLAMP  
7. 8P-2481 [1] LEVER AS.  
  9F-5647 [2] BEARING  
8. 2J-7295 [1] SPRING  
9. 6P-5208 [1] GUIDE  
10. 0S-1591 [1] BOLT  
11. 1D-4717 [3] NUT  
12. 6V-2762 C [8] SPACER  
13. 6V-2761 C [4] BOOT  
14. 2L-6267 [2] LOCKNUT  
15. 6D-5974 [4] BEARING  
16. 3B-8489 [2] FITTING  
17. 6T-1442 C [1] ROD AS.  
18. 1B-4430 [2] NUT  
19. 4D-4065 [2] ROD END  
20. 6T-2716 C [1] ROD AS.  
21. 8P-2496 [1] LEVER  
22. 6D-3787 [4] BEARING  
23. 6T-1447 C [1] LEVER AS.  
  030-8538 [1] BOLT 3.175CM(1.25IN)LG  
  5D-0353 [1] BOLT 2.54CM(1IN)LG  
  8B-8679 [1] SPACER  
24. 5V-6103 C [1] SPACER  
25. 1K-6872 C [8] LOCKNUT  
26. 6N-2715 C [1] ROD AS.  
  1B-4205 [2] NUT  
  4D-4065 [2] ROD END  
27. 6T-2712 C [1] ROD AS.  
28. 7B-3235 [3] BOLT  
29. 5P-8245 C [7] WASHER (SMALL)  
30. 8P-5322 [1] BRACKET AS.  
31. 9G-8854 [2] BELLCRANK  
32. 0S-1594 C [1] BOLT  
  8M-4069 [1] WASHER (LARGE)  
33. 2B-0947 C [2] BOLT  
34. 5J-5326 [1] WASHER  
35. 0S-1587 C [6] BOLT  
36. 0S-1571 [2] BOLT  
37. 3P-3937 [1] SHAFT  
38. 6T-1456 C [1] ROD AS.  
  4D-4065 [2] ROD END  
  1B-4430 [2] NUT  
39. 6T-1458 C [1] ROD AS.  
  1B-4430 [2] NUT  
  4D-4065 [2] ROD END  
40. 7L-0811 [1] PIN  
41. 0S-1588 [4] BOLT  
  5M-2894 C [4] WASHER  
42. 8M-9124 C [1] WASHER (SMALL)  
43. 8S-9089 C [1] BOLT  
44. 8P-2483 [1] LEVER  
45. 5S-9704 [2] SHAFT  
  1D-4720 [2] NUT  
  5P-8247 C [2] WASHER  
46. 0S-1621 C [2] BOLT  
  1J-8965 [2] WASHER (LARGE)  
47. 3P-3935 [1] SHAFT AS.  
  1B-8704 [1] KEY  
  5P-8161 F [1] FILM (MOUNTED ON R.H. OPERATOR''S PLATFORM)  
  C   INDICATES CHANGE
  F   NOT SHOWN
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
153 & 163 HYDRAULIC CONTROL
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Center Pin Failures: New Cylinder Has A Check Ball{5104}
1982/03/08
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
Improved Head For Ripper Lift Cylinder Group Uses New Rod Wear Ring And Seals{7562,5352}
1996/07/29
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6D :

MOUNTING GP-CYLINDER
9J-2697 MOUNTING GP-CYLINDER
LINES GP-TILT CYLINDER
7T-2299 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0477 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0477 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
2P-6054 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
2P-6053 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
7T-9463 LINES GP-TILT CYLINDER
7T-9462 CYLINDER AR-TILT
CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
CYLINDER GP-TILT
1U-3495 CYLINDER GP-TILT
CYLINDER GP-RIPPER LIFT
8J-1779 CYLINDER GP-RIPPER LIFT
LINKAGE GP-IMPLEMENT
8P-5038 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5038 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5039 LINKAGE GP-IMPLEMENT

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.