7N1398 ENGINE AR-PART 1 OF 2 3306 ENGINE S/N 8Z1827-UP D6D TRACK-TYPE TRACTOR

Part No	Qty	Parts name


1P-4244 Y	[1]	BREATHER GP
		-OR-
2W-9160 Y	[1]	BREATHER GP

2P-6202 Y	[1]	CAMSHAFT GP-SINGLE
2P-6215 Y	[1]	COOLER GP-FILTER BASE & ENGINE OIL
		-OR-
4W-5895 Y	[1]	COOLER GP-FILTER BASE & ENGINE OIL
7N-3520 Y	[1]	COOLER GP-TRANSMISSION OIL
		-OR-
4W-5894 Y	[1]	COOLER GP-TRANSMISSION OIL
7N-9779 Y	[1]	COVER GP-CYLINDER BLOCK
2P-6531 Y	[1]	COVER GP-CYLINDER HEAD
4N-5162 Y	[1]	COVER GP-FRONT HOUSING
4N-4510 Y	[1]	COVER GP-GOVERNOR
8N-4745 Y	[1]	COVER GP-VALVE MECHANISM
6N-8079 Y	[1]	CRANKSHAFT GP
7N-8016 RY	[1]	CYLINDER BLOCK GP
7N-8876 RY	[1]	CYLINDER HEAD GP

2P-7838 Y	[1]	DAMPER GP
2P-8161 Y	[1]	DRIVE GP-ACCESSORY

7N-9536 Y	[1]	FASTENER GP-CYLINDER HEAD
4N-9586 Y	[1]	FASTENER GP-EXHAUST MANIFOLD
2P-6498 Y	[1]	FASTENER GP-FRONT HOUSING
2P-6206 Y	[1]	FASTENER GP-OIL PAN
4N-5139 Y	[1]	FILLER GP-OIL
1P-2299 Y	[1]	FILTER AS-FUEL
2P-6475 Y	[1]	FILTER GP-OIL
7S-7874 Y	[1]	FLYWHEEL GP


2P-6493 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK)
2P-9642 Y	[1]	GEAR GP-FRONT TIMING
1N-4807 Y	[1]	GOVERNRO & FUEL INJECTION PUMP GP

6N-2514 Y	[1]	HOUSING GP-FLYWHEEL
2P-9641 Y	[1]	HOUSING GP-FRONT
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP12940002

7N-1398: ENGINE AR

ENGINE AR

7N1398 ENGINE AR-PART 2 OF 2
3306 ENGINE S/N 8Z1827-UP

SEBP12940002 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


1W-5566 Y	[1]	LIFTING GP-ENGINE
		-OR-
7N-7858 Y	[1]	LIFTING GP-ENGINE
7N-3884 Y	[1]	LINES GP-AIR
7N-3616 Y	[1]	LINES GP-DRAIN
2P-6105 Y	[1]	LINES GP-ENGINE OIL
7N-1646 Y	[1]	LINES GP-FUEL INJECTION
6N-0025 Y	[1]	LINES GP-TURBOCHARGER OIL
7N-7211 Y	[1]	LINES GP-WATER
		-OR-
2W-6779 Y	[1]	LINES GP-WATER

6N-0164 Y	[1]	MANIFOLD GP-EXHAUST

2P-6152 Y	[1]	PAN GP-OIL
8N-2531 Y	[6]	PISTON & ROD GP
		-OR-
1W-6588 Y	[6]	PISTON & ROD GP
7N-2887 Y	[1]	PULLEY GP-CRANKSHAFT
2P-1784 Y	[1]	PUMP GP-ENGINE OIL
4N-4314 Y	[1]	PUMP GP-FUEL PRIMING
7N-5909 Y	[1]	PUMP GP-WATER

2P-6226 Y	[1]	SEAL GP-CRANKSHAFT
1W-2457 Y	[1]	SUPPORT GP-ENGINE

7N-9589 Y	[1]	TRUNNION GP-ENGINE
8N-2669 Y	[1]	TURBOCHARGER GP

7N-8026 Y	[1]	VALVE MECHANISM GP

		THE FOLLOWING GASKET KITS ARE AVAILABLE:

6V-2971		VALVE GRINDING
6V-1752		CENTRAL & LOWER STRUCTURE
5P-8768		SINGLE CYLINDER LINER
6V-2912		FRONT STRUCTURE
6V-2921		REAR STRUCTURE
5P-9898		WATER PUMP
6V-0900		TURBOCHARGER MOUNTING
5P-9461		FUEL SYSTEM
6V-3727		OIL COOLER & LINES
Y		SEPARATE ILLUSTRATION

#SEBP12940003

7N-8016: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8016 CYLINDER BLOCK GP*R
ENGINE S/N 8Z1827-2961
6N8124-PAGE 6.04

c222405 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-8124 Y	[1]	CYLINDER BLOCK GP
2.	5S-6670	[18]	SEAL-O-RING
3.	2P-8889	[6]	LINER-CYLINDER
4.	3S-5496	[1]	SEAL-O-RING
5.	9L-5854	[6]	BAND-FILLER
6.	7N-7998	[1]	PLATE-BLOCK
7.	7N-7997	[1]	GASKET-PLATE
8.	5M-6214	[1]	PLUG-PIPE
9.	7H-3171	[1]	PLUG-PIPE
10.	5M-6213	[4]	PLUG
11.	8M-9307	[1]	PLUG-DRAIN
	6F-7062	[1]	WASHER
12.	3J-5389	[2]	PLUG
	Y		SEPARATE ILLUSTRATION

#SEBP12940004

7N-8016: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7N8016 CYLINDER BLOCK GP*R
ENGINE S/N 8Z2962-UP
7N6550 CYLINDER BLOCK-PAGE 6.02

c463962 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-6550 Y	[1]	CYLINDER BLOCK AS
2.	7M-4046	[4]	BEARING-SLEEVE
3.	8K-1207	[2]	PIN-DOWEL
4.	3S-5496	[1]	SEAL-O-RING
5.	8B-6349	[2]	DOWEL
6.	7N-7998	[1]	PLATE-BLOCK
7.	7W-7546	[1]	GASKET-PLATE
8.	5M-6214	[1]	PLUG-PIPE
9.	7H-3171	[1]	PLUG-PIPE
10.	5M-6213	[4]	PLUG
11.	8M-9307	[1]	PLUG-DRAIN
	6F-7062	[1]	WASHER
12.	2B-0858	[3]	PLUG-PIPE
13.	5B-7652	[2]	DOWEL
14.	8N-4110	[1]	BEARING-SLEEVE
15.	4B-5387	[2]	PLUG-CUP
16.	4B-9782	[1]	BALL
17.	1S-9540	[1]	DOWEL
18.	5S-8462	[1]	STUD
19.	4B-3938 C	[1]	PLUG-CUP
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP12940005

7N-6550: CYLINDER BLOCK AS

CYLINDER BLOCK AS

7N6550 CYLINDER BLOCK AS
ENGINE S/N 8Z2962-UP
PART OF 7N8016 CYLINDER BLOCK
FIELD REPLACEMENT ORDER 1N3576-PAGE 6.03

c548387 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-6670	[18]	SEAL-O-RING
2.	2P-8889	[6]	LINER-CYLINDER
	104-5512 AJ	[6]	INSERT-LINER SEAT (.822MM THK)
	104-5518 AJ	[6]	INSERT-LINER SEAT (1.605MM THK)
	104-5527 AJ	[6]	INSERT-LINER SEAT (2.710MM THK)
	104-5530 AJ	[6]	INSERT-LINER SEAT (5.210MM THK)
3.	2W-6134 C	[6]	BAND-FILLER
4.	7S-3224	[14]	BOLT
	2S-5658	[14]	WASHER-HARD
5.	6N-8003 M	[7]	CAP-CRANKSHAFT BEARING

			J - FOR USE WITH
			CYLINDER BLOCKS WITH
			LIGHT DAMAGE DUE TO
			EROSION/FRETTING IN
			THE LINER FLANGE
			SEATING AREA
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP12940006

1N-3576: CYLINDER BLOCK GP

CYLINDER BLOCK GP

1N3576 CYLINDER BLOCK GP
ENGINE S/N 8Z2962-UP
FIELD REPLACEMENT FOR 7N6550-PAGE 6.02

c484537 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-4046	[4]	BEARING-SLEEVE
2.	3J-6019	[1]	PLUG
3.	8K-1207	[2]	PIN-DOWEL
4.	4B-5387	[1]	PLUG-CUP
5.	1S-9540	[1]	DOWEL
6.	5B-7652	[2]	DOWEL
7.	6N-8003	[7]	CAP-CRANKSHAFT BEARING
8.	4B-3938	[1]	PLUG-CUP
9.	8B-6349	[2]	DOWEL
10.	5S-8462	[1]	STUD
11.	8N-4110	[1]	BEARING-SLEEVE
12.	4B-9782	[1]	BALL
13.	7S-3224	[14]	BOLT
	2S-5658	[14]	WASHER-HARD

#SEBP12940007

6N-8124: CYLINDER BLOCK GP

CYLINDER BLOCK GP

6N8124 CYLINDER BLOCK GP
ENGINE S/N 8Z1827-2961
PART OF 7N8016 CYLINDER BLOCK

c226957 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-4046	[4]	BEARING-SLEEVE
2.	2B-0858	[1]	PLUG-PIPE
3.	8K-1207	[2]	PIN-DOWEL
4.	4B-5387	[1]	PLUG-CUP
5.	1S-9540	[1]	DOWEL
6.	5B-7652	[2]	DOWEL
7.	6N-8003	[7]	CAP-CRANKSHAFT BEARING
8.	4B-3938	[1]	PLUG-CUP
9.	8B-6349	[2]	DOWEL
10.	5S-8462	[1]	STUD
11.	8N-4110 C	[1]	BEARING-SLEEVE
12.	4B-9782	[1]	BALL
13.	7S-3224	[14]	BOLT (5/8-11X5.25IN)
	2S-5658	[14]	WASHER-HARD (3.0MM THK)

			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	6N-7727	[1]	KIT-CYLINDER BLOCK
			(INCLUDES ORIFICE, PLUGS
			DOWELS, SLEEVE & BOLTS)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP12940008

6N-8079: CRANKSHAFT GP

CRANKSHAFT GP

6N8079 CRANKSHAFT GP
FIELD REPLACEMENT OF 4N7697 CRANKSHAFT ORDER 4N7693-PAGE 8

c496454 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-9342	[2]	PLATE-THRUST
2.	4N-7697	[1]	CRANKSHAFT AS
3.	9F-2247	[6]	PLUG
4.	4W-5738 C	[7]	BEARING-MAIN (STANDARD)
	8N-8225 AJ	[7]	BEARING-MAIN (.25MM US)
	8N-8226 AJ	[7]	BEARING-MAIN (.51MM US)
	8N-8227 AJ	[7]	BEARING-MAIN (.76MM US)
	8N-8228 AJ	[7]	BEARING-MAIN (.51MM OS)
	8N-8229 AJ	[7]	BEARING-MAIN
			(.25MM US .51MM OS)

			J-USE AS REQUIRED
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE

#SEBP12940009

7N-9779: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

7N9779 COVER GP-CYLINDER BLOCK

c222140 SEBP1294

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4M-6480	[1]	GASKET
2.	0S-1594	[2]	BOLT
	5M-2894	[2]	WASHER
3.	6N-7232	[1]	PLATE
4.	4B-3938	[1]	PLUG-CUP
5.	2A-3798	[2]	DOWEL

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Proper Storage Procedures for Commercial Engines {0355, 1000}
2009/12/03

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}

Instructions For 3306 DI Engine Tune-Up{1000}
Instructions For 3306 DI Engine Tune-Up{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Installation of a 3306 Engine Emissions Upgrade Group for a D6D Track-Type Tractor {1000}
Installation of a 3306 Engine Emissions Upgrade Group for a D6D Track-Type Tractor {1000}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN TRACK-TYPE TRACTORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Introduction
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

Engine Design Sleeve Metering Fuel System - PC
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

Introduction
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Engine Design
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Engine Design
3306C Engines for Caterpillar Built Machines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Systems Operation
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT® REMAN ANNOUNCES ADDITIONAL C27, C32 AND 3306 OPTIONS FOR CAT MACHINE APPLICATIONS
CAT® REMAN ANNOUNCES ADDITIONAL C27, C32 AND 3306 OPTIONS FOR CAT MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL 3116 AND 3306 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL 3116 AND 3306 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL ENGINE AND LONG BLOCK OPTIONS FOR CAT® INDUSTRIAL AND MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL ENGINE AND LONG BLOCK OPTIONS FOR CAT® INDUSTRIAL AND MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL 3412, 3408, 3306, 3406, C7, 3196 AND C18 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)
CAT REMAN ANNOUNCES ADDITIONAL 3412, 3408, 3306, 3406, C7, 3196 AND C18 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE MATRIX)

CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)

Service Letter-APD

Testing and Adjusting

Testing And Adjusting
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS

Troubleshooting
3306C Engines for Caterpillar Built Machines

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Engines (Power Shift, Direct Drive And Special Application)
3306 VEHICULAR ENGINE FOR D6D TRACTORS

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

New Transmission And Engine Oil Cooler Has Rubber End Sheets{1375,1378}
1988/02/08

Improved Engine Design Uses Cylinder Block With Spacer Plate{1000}
1979/04/09

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Solitary Letter "Z" Identifies Custom Machine Products; Two New Identification Plates Used{0336,0337,1000,3150,7000}
1989/08/14

3306 (08Z) Machine Engine Serial Number Range Exhausted {1000,7557}
1997/06/30

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/01/21

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D6D :

7N-1398 ENGINE AR

7N-8016 CYLINDER BLOCK GP

7N-6550 CYLINDER BLOCK AS

1N-3576 CYLINDER BLOCK GP

6N-8124 CYLINDER BLOCK GP

6N-8079 CRANKSHAFT GP

7N-9779 COVER GP-CYLINDER BLOCK

Truck sale:

Caterpillar D6D
- Crawler dozers
HOLT CAT

Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.

25,000

Caterpillar D6D, Crawler dozers, Construction

59,000

Caterpillar D6D, Crawler dozers, Construction

22,417

Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT