AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N1738 GOVERNOR & FUEL INJECTION PUMP GROUP-PART 4 OF 4 PART OF 1N4806 & 7N2193 GOVERNOR & FUEL INJECTION PUMP GROUPS SHOWN ON PAGES 48 & 49 D6D


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
GOVERNOR GP
TORQUE CONTROL GP
CONTROL GP-GOVERNOR
LINES GP-FUEL
LINES GP-FUEL INJECTION
LINES GP-DRAIN

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 06X
 D6D LGP TRACTOR / POWER SHIFT / 06X01115-UP (MACHINE) POWERED BY 3306 ENGINE SEBP1296 D6D 06X   (1977)

FUEL SYSTEM

GOVERNOR GP
7N-2177 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1N-4807 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1N-4806 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-2193 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
 

#SEBP12960120
 

7N-1738: PUMP GP-GOV & FUEL INJ

7N1738 GOVERNOR & FUEL INJECTION PUMP GROUP-PART 4 OF 4
PART OF 1N4806 & 7N2193 GOVERNOR & FUEL INJECTION PUMP GROUPS SHOWN
ON PAGES 48 & 49
c229974 SEBP1296
7N1738 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0116 [1] GUIDE-IDLE SCREW  
2. 8N-1570 [1] HOUSING AS-PUMP  
3. 4N-5481 [1] STUD  
4. 4N-2333 [1] PIN-SPRING  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL-O-RING  
7. 1P-2298 [1] VALVE AS  
8. 8N-0984 [6] PIN-SPRING  
9. 6N-1078 [1] BEARING  
10. 8N-0628 [1] BEARING  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE-CAMSHAFT  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT-HEAD  
16. 4N-5578 [1] COVER-IDLE SCREW  
  4N-0049 [1] GASKET-COVER  
17. 1P-9925 [2] BOLT  
18. 4N-0594 [1] GASKET-GOVERNOR HOUSING  
19. 2A-4781 [1] BOLT  
20. 6N-7523 [1] WASHER  
21. 9S-8632 [1] SPRING  
22. 3B-8695 [1] BOLT  
  6N-7523 [1] WASHER  
 

#SEBP12960121
 

6N-0599: TORQUE CONTROL GP

6N0599 CONTROL GP-TORQUE
PART OF 7N2193 GOVERNOR & FUEL INJECTION PUMP GP
c202488 SEBP1296
6N0599 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT  
2. 8M-9064 [1] SHIM (.064 in. thick)  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT  
5. 4N-7777 [2] SPACER (.010 in. thick)  
6. 9L-7235 [3] SHIM (.039 in. thick)  
7. 4N-9098 [1] SPACER (.500 in. thick)  
8. 1P-6453 [1] BAR  
9. 9L-5176 [1] SPRING (.022 in. thick)  
10. 8L-8601 [6] SPACER (.002 in. thick)  
11. 1P-6452 [2] INSULATOR  
12. 9L-9347 [2] SHIM (.020 in. thick)  
 

#SEBP12960122
 

4N-4510: COVER GP-GOVERNOR

4N4510 COVER GP-GOVERNOR
c229520 SEBP1296
4N4510 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8082 C [1] COVER  
2. 0S-1615 [2] BOLT  
  5P-0537 C [2] WASHER  
3. 4M-8303 C [1] SEAL-O-RING  
4. 2S-7905 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12960123
 

6N-3586: TORQUE CONTROL GP

6N3586 CONTROL GP-TORQUE
PART OF 1N4807 GOVERNOR & FUEL INJECTION PUMP GP
c455165 SEBP1296
6N3586 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT-FULL  
2. 4L-7124 [1] BOLT  
3. 4N-3882 [1] CONTACT-STOP  
4. 8M-9064 [1] SHIM-SPRING .064IN(1.626MM)THICK  
5. 1P-6452 [2] INSULATOR  
6. 9L-7235 [3] SHIM-TORQUE SPRING .039IN(.991MM)THICK  
7. 4N-7777 [3] SPACER .010IN(.2540MM)THICK  
8. 4N-9098 [1] SPACER .200IN(5.08MM)THICK  
9. 1P-6453 [1] BAR-LOAD STOP  
10. 6N-3034 [1] SPRING-TORQUE .016IN(.4064MM)THICK  
11. 8L-8601 [6] SPACER .002IN(.0508MM)THICK  
12. 9L-9347 [2] SHIM-TORQUE SPRING .020IN(.508MM)THICK  
 

#SEBP12960124
 

8P-2457: CONTROL GP-GOVERNOR

8P2457 GOVERNOR CONTROL GROUP-PART 1
c409032 SEBP1296
8P2457 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-9252 [4] END-ADJUSTABLE ROD  
2. 5B-9079 [5] NUT-JAM  
3. 1P-4573 [1] ROD  
4. 8P-7317 [1] BOOT  
5. 5P-0597 [2] CLAMP  
6. 0L-1143 C [1] BOLT  
7. 5M-2894 C [2] WASHER  
8. 5P-1075 C [1] WASHER-HARD  
9. 9V-7112 C [1] BLOCK  
10. 6D-5707 [1] LEVER  
11. 1B-8704 [2] KEY-WOODRUFF  
12. 9H-6673 [4] PIN  
13. 3B-4615 [4] PIN-COTTER  
14. 8P-2451 [1] ROD AS  
15. 8P-2445 [1] ROD  
16. 1F-5403 [1] END-ADJUSTABLE ROD  
17. 1V-0026 [1] LEVER  
18. 4B-3388 [1] BOLT  
19. 8P-2441 [1] BELLCRANK AS  
  3K-6662 [2] BEARING  
20. 8P-2443 [1] SHAFT  
  6H-3956 [1] PIN  
21. 3D-8752 [1] LOCKNUT  
22. 8P-7792 [1] BOOT  
23. 0S-1588 C [2] BOLT  
24. 1B-2578 [1] NUT  
25. 8P-2437 [1] BRACKET AS  
26. 8P-2429 [1] SHAFT  
27. 2S-6079 [1] KEY  
28. 8H-7577 [1] PLATE-LOCKING  
29. 7M-2167 [1] RING-GOVERNOR CONTROL  
30. 8P-2454 [1] ROD AS  
  8P-2455 [1] ROD  
31. 9K-8757 [1] ROD END-BEARING  
32. 1A-8285 [1] NUT-JAM  
33. 8P-2456 [1] TUBE  
  8H-9523 [1] SPRING  
34. 1B-4430 [2] NUT-JAM  
35. 5J-0557 [1] ROD END-BEARING  
36. 8P-2458 C [1] ROD  
37. 9S-8750 C [4] NUT-FULL  
  5P-0537 C [4] WASHER  
38. 8P-2430 [1] SHAFT AS  
  2S-6091 [2] DOWEL  
39. 8H-9180 [2] SEAL-LIP TYPE  
40. 5H-7152 [1] SPRING  
41. 7M-6955 [1] GASKET  
42. 8P-2426 [1] SUPPORT AS  
43. 9F-5647 [1] BEARING  
44. 3B-1915 [1] BOLT  
  9S-8752 C [1] NUT-FULL  
45. 8H-9182 [2] ROLLER-GOVERNOR CONTROL  
  8H-9186 [2] SPRING  
46. 8M-6770 [1] LEVER-GOVERNOR CONTROL  
47. 7F-8092 [1] KNOB  
48. 4B-3611 C [1] SETSCREW-SQUARE HEAD  
49. 8B-2377 [3] BOLT 50.80MM(2IN.)LONG  
  1B-2713 [1] BOLT 44.45MM(1.75IN)LG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12960125
 

8P-2457: CONTROL GP-GOVERNOR

8P2457 GOVERNOR CONTROL GROUP-PART 2
c409033 SEBP1296
8P2457 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-6773 [1] LEVER-GOVERNOR CONTROL  
2. 1B-8704 [2] KEY-WOODRUFF  
3. 0S-1588 [1] BOLT  
4. 9H-6673 [2] PIN  
5. 3B-4615 [2] PIN-COTTER  
6. 4D-2619 [2] BEARING  
7. 0L-1351 [4] BOLT  
8. 5M-2894 C [5] WASHER  
9. 8P-2435 [1] SHAFT  
10. 3T-1753 C [2] BRACKET AS  
11. 5K-6079 [1] LEVER  
12. 3B-1915 [1] BOLT  
13. 5P-8245 C [3] WASHER  
14. 6B-6684 C [1] NUT-FULL  
15. 8P-2463 [1] PEDAL AS  
16. 8P-2460 [1] SUPPORT AS  
17. 1P-6313 [2] BUSHING  
18. 3B-4617 [1] COTTER  
19. 0S-1595 [2] BOLT  
20. 1A-2812 [1] WASHER  
21. 2S-7593 C [1] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12960126
 

3T-0339: LINES GP-FUEL

3T0339 LINES GP-FUEL
S/N 6X1115-1735
c228647 SEBP1296
3T0339 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-6127 [3] CLIP  
2. 0S-0509 [5] BOLT  
3. 5M-2894 [8] WASHER  
4. 5P-1200 H TUBE 135 cm (53.15 in.)  
5. 2K-8851 [6] NUT  
6. 6H-3068 [3] CLIP  
7. 9P-4486 [1] TUBE ASSEM.  
8. 5K-9242 [2] UNION  
9. 4K-8179 [1] CLIP  
10. 5K-9248 [1] CONNECTOR  
11. 5P-7090 [1] VALVE  
12. 003-2143 [1] ELBOW  
13. 9P-3438 [1] TUBE ASSEM.  
14. 5K-0430 [1] CLIP  
15. 5P-1200 H TUBE 128 cm (50.4 in.)  
16. 5K-6875 [1] ADAPTER  
17. 6L-5652 [1] ADAPTER  
18. 9L-3560 [1] ELBOW  
19. 5P-6940 [1] VALVE  
20. 2R-8613 [1] ADAPTER  
21. 5P-1442 H HOSE 25 cm (9.85 in.)  
22. 5K-9246 [1] CONNECTOR  
23. 5P-4675 [1] ADAPTER  
  1J-9671 [1] SEAL  
24. 3T-1690 [1] TUBE ASSEM.  
25. 7K-1456 [2] UNION  
26. 7B-1597 [1] CLIP  
27. 5P-1200 H TUBE 65 cm(25.60 in.)  
28. 5K-9243 [1] ELBOW  
  H   ORDER BY THE CENTIMETER
 

#SEBP12960127
 

3T-0339: LINES GP-FUEL

3T0339 LINES GP-FUEL
S/N 6X1736-UP
c330418 SEBP1296
3T0339 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-6127 [3] CLIP  
2. 0S-0509 [5] BOLT  
3. 5M-2894 C [7] WASHER  
4. 5P-1200 BE TUBE  
5. 2K-8851 [6] NUT-FLARED  
6. 6H-3068 [3] CLIP  
7. 9P-4486 [1] TUBE AS  
8. 5K-9242 C [1] UNION-FLARED  
9. 4K-8179 [1] CLIP  
10. 5K-9248 [1] CONNECTOR-FLARED  
11. 5P-7090 [1] VALVE-BALL  
12. 003-2143 [1] ELBOW  
13. 9P-3438 [1] TUBE AS  
14. 5K-0430 [1] CLIP  
15. 5P-1200 BE TUBE  
16. 5K-6875 [1] ADAPTER  
17. 6L-5652 [1] ADAPTER  
18. 9L-3560 [1] ELBOW  
19. 5P-6940 [1] VALVE-BALL  
20. 2R-8613 [1] ADAPTER-HOSE  
21. 5P-1442 BE HOSE  
22. 5K-9246 [1] CONNECTOR-FLARED  
23. 5P-4675 [1] ADAPTER  
  1J-9671 [1] SEAL-O-RING  
24. 3T-1690 [1] TUBE AS  
25. 7K-1456 [2] UNION-FLARED  
26. 7B-1597 [1] CLIP  
27. 5P-1200 BE TUBE  
28. 5K-9243 [1] ELBOW-FLARED  
29. 9S-7703 C [1] ELBOW-FLARED  
30. 9S-1310 C [1] CLIP  
31. 8K-5443 C [1] CLIP  
32. 9G-8856 C [1] SCREEN-FUEL TANK  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP12960128
 

7N-1646: LINES GP-FUEL INJECTION

7N1646 FUEL INJECTION LINES GROUP
c316866 SEBP1296
7N1646 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8388 [6] SPACER-CLAMP  
2. 1W-2459 [6] CLAMP AS-NOZZLE  
3. 7N-0449 C [6] NOZZLE AS-F INJECTION  
    (EACH INCLUDES)
4. 1H-1023 C [1] SEAL-O-RING  
5. 9L-9098 R [1] SEAL-CARBON STOP  
6. 9L-9099 [1] WASHER-PLAIN  
7. 8N-4376 [1] LINE AS-FUEL INJ (NO. 6)  
8. 8N-4375 [1] LINE AS-FUEL INJ (NO. 5)  
9. 6N-6403 [7] CLAMP (TAPPED)  
10. 6N-6404 [5] CLAMP  
11. 6H-9954 [13] SCREW AS-MACHINE  
12. 8N-4374 [1] LINE AS-FUEL INJ (NO. 4)  
13. 8N-4373 [1] LINE AS-FUEL INJ (NO. 3)  
14. 1N-3139 C [1] CLAMP AS-FUEL LINE  
15. 7N-4417 [2] CLAMP AS-LINE  
16. 6N-5125 [1] CLAMP-FUEL LINE  
17. 8N-4372 [1] LINE AS-FUEL INJ (NO. 2)  
18. 8N-4371 C [1] LINE AS-FUEL INJ (NO 1)  
19. 1B-4203 [3] NUT-FULL  
20. 2H-3934 [1] SEAL  
21. 2A-5546 [2] BOLT  
  5P-0537 [2] WASHER  
22. 6N-4682 [1] BRACKET-SUPPORT  
23. 2B-2695 [2] BOLT  
  9M-1974 [2] WASHER  
24. 0S-1619 [2] BOLT  
25. 5M-2894 [3] WASHER  
26. 2P-5641 [1] ADAPTER  
27. 4D-9786 [1] BLOCK  
28. 5M-6214 [1] PLUG-PIPE  
29. 8M-5253 [1] SEAL  
30. 1A-2029 [1] BOLT  
31. 8M-5248 [1] SEAL-O-RING  
32. 6N-5124 [3] CLAMP-FUEL LINE (TAPPED)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP12960129
 

7N-3616: LINES GP-DRAIN

7N3616 LINES GP-DRAIN
c181762 SEBP1296
7N3616 LINES GP-DRAIN Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6011 H TUBE .6 m(23.62 in.)  
2. 7K-8332 [1] INSERT  
3. 1A-5350 [1] CLIP  
4. 5K-2298 C [1] CLIP  
  2H-3755 C [1] BOLT  
  9M-1974 C [1] WASHER  
5. 5P-6011 CH TUBE (Drain) .4m(15.7 in.)  
  C   INDICATES CHANGE
  H   ORDER BY THE METER
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> For D5D &amp; D6D With Power Shift Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Power Shift Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Direct Drive Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Power Shift Transmission (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor and Decelerator Control <BR> (9S7053 For D7G Tractors; Power Shift) (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Power Shift Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Direct Drive Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Power Shift Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Housing<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &&amp; D6D With Power Shift Transmission
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Governor
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Governor
3306C Engines for Caterpillar Built Machines
Testing and Adjusting
Governor - Adjust
3306C Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Transfer Pump
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Injection Pump Housing And Governor, Separation And Connection
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Governor
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Check Valve And Bypass Valve
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Injection Pumps
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Governor Control
D4E, D5B & D6D TRACTORS OPERATOR'S STATION
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
Different Bracket Assembly, Lever Used, Washer Added To Governor Control Groups{1265,1269}
1980/10/13
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Rod End Improves Operation Of Governor Control{1265,1276,1269,1264}
1981/04/20
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog D6D :

PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-1738 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7N-2193 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1N-4806 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1N-4807 PUMP GP-GOV & FUEL INJ
7N-2177 PUMP GP-GOV & FUEL INJ
MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
TORQUE CONTROL GP
6N-0599 TORQUE CONTROL GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
TORQUE CONTROL GP
6N-3586 TORQUE CONTROL GP
CONTROL GP-GOVERNOR
8P-2457 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8P-2457 CONTROL GP-GOVERNOR
LINES GP-FUEL
3T-0339 LINES GP-FUEL
LINES GP-FUEL
3T-0339 LINES GP-FUEL
LINES GP-FUEL INJECTION
7N-1646 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.