AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y7797 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 4 PART OF 9Y7796 GOVERNOR & FUEL INJECTION PUMP 3208


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-FUEL RATIO
TORQUE CONTROL GP

MARINE ENGINE 3208 MARINE ENGINE 01Z
 3208 MARINE ENGINE 01Z00001-21746 SEBP1297 3208 01Z   (1980)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
 

#SEBP12970450
 

9Y-7797: PUMP GP-GOV & FUEL INJ

9Y7797 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 4
PART OF 9Y7796 GOVERNOR & FUEL INJECTION PUMP
c473364 SEBP1297
9Y7797 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 6N-1729 [1] COVER-PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 4N-0935 [1] HOUSING AS  
11. 4N-3713 [1] SEAL-LIP TYPE  
12. 9N-5861 [1] HOUSING AS-PUMP  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 4N-2333 [1] PIN-SPRING  
17. 8N-0984 [8] PIN-SPRING  
18. 4N-5481 [1] STUD  
19. 9S-4180 [1] PLUG-O-RING  
20. 4J-7533 [1] SEAL-O-RING  
21. 4N-0940 [1] LEVER-SHUT-OFF  
22. 4N-0937 [1] SHAFT-LEVER  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
27. 4N-0595 [1] GASKET-TOP COVER  
28. 1P-4001 [1] FITTING  
29. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
 

#SEBP12970451
 

9Y-7797: PUMP GP-GOV & FUEL INJ

9Y7797 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 4
PART OF 9Y7796 GOVERNOR & FUEL INJECTION PUMP
c490624 SEBP1297
9Y7797 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 7E-4535 [1] CAMSHAFT-PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
21. 7M-7219 [1] BEARING-THRUST  
 

#SEBP12970452
 

4P-1815: PUMP GP-GOV & FUEL INJ

4P1815 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 4
PART OF 4P1814 GOVERNOR & FUEL INJECTION PUMP
c501642 SEBP1297
4P1815 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1132 [1] BODY AS-TRANSFER PUMP  
2. 8S-6814 [1] PIN  
3. 4N-1584 [1] SEAL-LIP TYPE  
4. 4N-0636 [1] SEAL-LIP TYPE  
5. 8H-9804 [1] SHAFT-PUMP IDLER  
6. 7W-8120 [8] BUSHING  
7. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
8. 9N-5817 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 9Y-9246 [8] PUMP AS-FUEL INJECTION  
11. 2M-5471 [2] BOLT  
12. 4N-0605 [1] SPRING  
13. 9Y-0546 [1] FLANGE AS  
14. 1P-2298 [1] VALVE AS  
15. 4N-0975 [1] GASKET-CHECK VALVE  
16. 6N-1716 [1] VALVE AS  
17. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
18. 5M-6509 [1] SEAL-O-RING  
19. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
20. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
21. 4N-1767 [1] VALVE-BYPASS (FUEL)  
22. 4N-2954 [1] SLEEVE-CAMSHAFT  
23. 9F-6641 [4] BOLT  
 

#SEBP12970453
 

4P-1815: PUMP GP-GOV & FUEL INJ

4P1815 GOVERNOR & FUEL INJECTION PUMP GP-PART 2 OF 4
PART OF 4P1814 GOVERNOR & FUEL INJECTION PUMP
c638891 SEBP1297
4P1815 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2773 [1] SHAFT AS-CONTROL  
2. 5S-0003 [1] NUT-FULL  
3. 4N-2708 [1] SETSCREW  
4. 4N-0528 [1] SHAFT-LEVER  
5. 4N-9828 [1] SHAFT AS-CONTROL  
6. 4N-3922 [1] LEVER AS-CONNECTION  
7. 2N-2658 [10] BOLT-SOCKET HEAD  
8. 9N-5820 [8] LEVER-CONTROL  
9. 126-4144 [1] LEVER-SHAFT  
10. 124-5941 [1] SHAFT-CONTROL  
11. 7C-6202 [1] LEVER  
12. 7X-2395 [1] BOLT-LOCKING  
13. 6F-0612 [1] NUT-JAM  
14. 6N-4176 [1] SETSCREW  
15. 4N-0445 [1] LEVER-LOAD STOP  
16. 4N-0523 [1] DOWEL-STOP SUPPORT  
17. 2D-6392 [2] SEAL-O-RING  
18. 4N-3329 [2] WASHER  
19. 6N-7523 [1] WASHER  
20. 8F-8178 [1] BOLT  
21. 1D-4533 [3] BOLT  
22. 2A-4781 [3] BOLT  
23. 8N-3946 [1] HOUSING AS-GOVERNOR  
24. 4N-2333 [1] PIN-SPRING  
25. 8S-6814 [2] PIN  
26. 9L-9503 [1] DOWEL-HOLLOW  
27. 9S-4182 [1] PLUG  
28. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
29. 8N-3945 [1] BUSHING-TERMINAL  
30. 2W-4037 [1] SEAL-LIP  
31. 9Y-4966 [1] VALVE AS-RELIEF  
32. 3H-0442 [1] SEAL-O-RING  
33. 2M-7819 [1] RING-RETAINING  
34. 6L-3921 [1] WASHER-SEAL  
35. 7C-6201 [1] LEVER-SEAT  
36. 128-7347 [1] LEVER AS-RISER  
 

#SEBP12970454
 

4P-1815: PUMP GP-GOV & FUEL INJ

4P1815 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 4
PART OF 4P1814 GOVERNOR & FUEL INJECTION PUMP
c638892 SEBP1297
4P1815 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 124-5939 [1] COVER-FUEL PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 128-2974 [1] HOUSING AS  
11. 4N-3713 [1] SEAL-LIP  
12. 132-2117 [1] HOUSING AS-PUMP  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 3H-0703 [1] DOWEL  
17. 8N-0984 [8] PIN-SPRING  
18. 4N-5481 [1] STUD  
19. 9S-4180 [1] PLUG-O-RING  
20. 4J-7533 [1] SEAL-O-RING  
21. 4N-0940 [1] LEVER-SHUTOFF  
22. 124-5942 [1] SHAFT-SOLENOID  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
27. 127-7139 [1] GASKET-TOP COVER  
28. 1P-4001 [1] FITTING  
29. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
 

#SEBP12970455
 

4P-1815: PUMP GP-GOV & FUEL INJ

4P1815 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 4
PART OF 4P1814 GOVERNOR & FUEL INJECTION PUMP
c501645 SEBP1297
4P1815 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 7W-6827 [1] CAMSHAFT AS  
  7W-6831 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
21. 7M-7219 [1] BEARING-THRUST  
 

#SEBP12970456
 

9N-6055: CONTROL GP-FUEL RATIO

9N6055 CONTROL GP-FUEL RATIO
PART OF 4P1664 & 9Y7795 GOVERNOR & FUEL INJECTION PUMPS
c315412 SEBP1297
9N6055 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 5P-0537 [4] WASHER  
3. 6V-2380 [2] BOLT  
4. 6L-5766 [1] GASKET  
5. 4S-7458 [1] DIAPHRAGM  
6. 6N-1603 [1] HOUSING AS  
7. 6L-5773 [1] GASKET  
8. 5S-6120 [1] RETAINER AS  
9. 9N-6060 [1] BOLT-CONTROL ADJUSTABLE  
10. 6N-0968 [1] SPRING  
11. 6L-5769 [1] WASHER  
12. 6L-5767 [1] COVER-DIAPHRAGM  
13. 6N-1606 [1] SPRING  
14. 5S-6458 [1] DOWEL  
15. 6L-5764 [1] COVER-ADJUSTMENT  
16. 2N-5919 [3] BOLT  
  6N-7523 [3] WASHER  
 

#SEBP12970457
 

1W-3946: CONTROL GP-FUEL RATIO

1W3946 CONTROL GP-FUEL RATIO
1W0176-PAGE 53Z.02
AN ATTACHMENT
c565607 SEBP1297
1W3946 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0176 Y [1] CONTROL GP-FUEL RATIO  
2. 9L-5125 [1] ELBOW  
3. 3N-4579 I [1] HOSE AS  
4. 5P-0537 [2] WASHER  
  6V-2380 [2] BOLT  
5. 6L-5773 [1] GASKET  
6. 4N-0508 [1] GASKET-COVER  
7. 2W-5447 [1] GASKET  
8. 8C-8418 BD WIRE-LOCK (.3M)  
9. 8S-8158 [1] SEAL-WIRE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBP12970458
 

1W-0176: CONTROL GP-FUEL RATIO

1W0176 CONTROL GP-FUEL RATIO
PART OF 1W3946 CONTROL-FUEL RATIO
AN ATTACHMENT
c400071 SEBP1297
1W0176 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1603 [1] HOUSING AS  
2. 6N-0968 [1] SPRING  
3. 6L-5764 [1] COVER-ADJUSTMENT  
4. 5S-6458 [1] DOWEL  
5. 2N-5919 [3] BOLT  
6. 6L-5766 [1] GASKET  
7. 6L-5767 [1] COVER-DIAPHRAGM  
8. 6N-1606 [1] SPRING  
9. 6L-5769 [1] WASHER  
10. 5S-6120 [1] RETAINER AS  
11. 9N-6060 [1] BOLT-CONTROL ADJUSTABLE  
12. 4F-7957 [2] BOLT  
13. 6N-7523 [5] WASHER  
14. 4S-7458 [1] DIAPHRAGM  
 

#SEBP12970459
 

6N-0509: TORQUE CONTROL GP

6N0509 TORQUE CONTROL GP
PART OF 1N3105, 4W6736, 9N5863, 7W8041, 7C2234, 9N3757,
7C8973, 7C9496, 9Y0491, 9Y7795 & 4P1664 PUMPS
c456524 SEBP1297
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Fuel Injection Timing Changed To 15° With New 3.5° Timing Advance
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Gear And Weight Assembly Used In Governor And Fuel Pump Drive Group {1272}
1995/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Converting 3208TA Pleasure Craft Marine Engines From 355BHP To 375BHP{1050, 1251, 1350, 1379}
Converting 3208TA Pleasure Craft Marine Engines From 355BHP To 375BHP{1050, 1251, 1350, 1379}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Installation Of 9G8187 Cold Start Relay{1289}
Installation Of 9G8187 Cold Start Relay{1289}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 MARINE ENGINE
Governor
3208 MARINE ENGINE
Fuel Transfer Pump
3208 MARINE ENGINE
Automatic Timing Advance Unit
3208 MARINE ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3208 MARINE ENGINE
Check Valve & Bypass Valve
3208 MARINE ENGINE
Fuel Injection Pumps
3208 MARINE ENGINE
Fuel Transfer Pump
3208 MARINE ENGINE
Fuel Injection Pump Housing
3208 MARINE ENGINE
Governor
3208 MARINE ENGINE
Automatic Timing Advance
3208 MARINE ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1664 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1814 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7795 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7796 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-7797 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
CONTROL GP-FUEL RATIO
9N-6055 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
1W-3946 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
1W-0176 CONTROL GP-FUEL RATIO

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.