9L6925 FUEL SYSTEM FASTENER GROUP 3208 MARINE ENGINE



FUEL SYSTEM
PUMP GP-FUEL TRANSFER
CONTROL GP-GOVERNOR
ELECTRICAL AND STARTING SYSTEM
BATTERY GP

MARINE ENGINE 3208 MARINE ENGINE 01Z
 3208 MARINE ENGINE 01Z00001-21746 SEBP1297 3208 01Z   (1980)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
FASTENER GP-FUEL PUMP HOUSING
9L-6925 FASTENER GP-FUEL PUMP HOUSING
 

#SEBP12970460
 

9L-6925: FASTENER GP-FUEL PUMP HOUSING

9L6925 FUEL SYSTEM FASTENER GROUP
c613475 SEBP1297
9L6925 FASTENER GP-FUEL PUMP HOUSING Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9M-9729 [1] SEAL-O-RING  
2. 7F-5634 [1] BOLT-GROUND BODY  
3. 125-1414 [2] SPACER  
4. 1A-9579 [1] BOLT (5/16-18X1.5IN)  
 

#SEBP12970461
 

4N-9399: CONTROL GP-GOVERNOR

4N9399 GOVERNOR CONTROL GROUP
c205107 SEBP1297
4N9399 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 6N-3646 C [1] LEVER-GOVERNOR CONT  
2. 2A-0762 [1] BOLT  
  5P-0537 [1] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP12970462
 

9L-6743: CONTROL GP-GOVERNOR

9L6743 GOVERNOR CONTROL GROUP
S/N 1Z5636-UP
ALSO PART OF 7W5134 LIFTING & CONTROL
c527787 SEBP1297
9L6743 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 9N-0984 [1] LEVER  
2. 5P-2534 [1] BOLT-FLANGE HEAD  
3. 6I-1810 [1] SPRING  
4. 9N-0983 [1] LEVER AS  
 

#SEBP12970463
 

7C-1900: BATTERY GP

7C1900 BATTERY GP-24 VOLT, 100 AMPERE - MAINTENANCE FREE
TYPE 1
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
c403063 SEBP1297
7C1900 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 [1] CABLE AS  
  5P-0747 BE CABLE (00 GA)  
2. 5M-9205 [1] TERMINAL AS (NEG)  
3. 5M-9204 [1] TERMINAL AS (POS)  
    (EA TERM AS INCL)
4. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
5. 9G-0004 [2] COVER (POS)  
6. 9G-0003 [2] COVER (NEG)  
7. 3T-5760 [2] BATTERY (12 VOLT)  
8. 5M-9204 [1] TERMINAL AS (POS)  
9. 5M-9205 [1] TERMINAL AS (NEG)  
    (EA TERM AS INCL)
10. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP12970464
 

7C-1899: BATTERY GP

7C1899 BATTERY GP
24 VOLT, 66 AMPERE
FOR USE WITH BATTERY SUPPORT GP
AN ATTACHMENT
c402931 SEBP1297
7C1899 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 [1] CABLE AS  
  5P-0747 BE CABLE (00 GA)  
2. 5M-9205 [1] TERMINAL AS (NEG)  
3. 5M-9204 [1] TERMINAL AS (POS)  
    (EA TERM AS INCL)
4. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
5. 9G-0004 [2] COVER (POS)  
6. 9G-0003 [2] COVER (NEG)  
7. 3T-5857 [2] BATTERY (12 VOLT)  
8. 5M-9204 [1] TERMINAL AS (POS)  
9. 5M-9205 [1] TERMINAL AS (NEG)  
    (EA TERM AS INCL)
10. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP12970465
 

7C-1900: BATTERY GP

7C1900 BATTERY GP-24 VOLT, 100 AMPERE - MAINTENANCE FREE
TYPE 2
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
c504135 SEBP1297
7C1900 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 [1] CABLE AS  
  5P-0747 BE CABLE (00 GA)  
2. 5M-9205 [1] TERMINAL AS (NEG)  
3. 5M-9204 [1] TERMINAL AS (POS)  
    (EA TERM AS INCL)
4. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
5. 9G-0004 [2] COVER (POS)  
6. 9G-0003 [2] COVER (NEG)  
7. 3T-5760 [2] BATTERY (12 VOLT)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP12970466
 

7C-1977: BATTERY GP

7C1977 BATTERY GP
24 VOLT, 92 AMPERE
AN ATTACHMENT
c508554 SEBP1297
7C1977 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 [1] CABLE AS  
  5P-0747 BE CABLE (00 GA)  
2. 5M-9205 [1] TERMINAL AS (NEG)  
3. 5M-9204 [1] TERMINAL AS (POS)  
    (EA TERM AS INCL)
4. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
5. 9G-0004 [2] COVER (POS)  
6. 9G-0003 [2] COVER (NEG)  
7. 9G-4233 [2] BATTERY-12V  
    (EACH INCLUDES)
  7N-0060 [6] VENT AS  
8. 5M-9204 [1] TERMINAL AS (POS)  
9. 5M-9205 [1] TERMINAL AS (NEG)  
    (EA TERM AS INCL)
10. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP12970467
 

7L-7871: BATTERY GP

7L7871 BATTERY GP-24 VOLT, 172 AMPERE (925 CCA)
TYPE 1
AN ATTACHMENT
c405389 SEBP1297
7L7871 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 C [1] CABLE AS  
  5P-0747 BE CABLE (00 GA)  
2. 5M-9205 [1] TERMINAL AS (-)  
3. 5M-9204 [1] TERMINAL AS (+)  
    (EA TERM AS INCL)
4. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
5. 9G-0004 C [2] COVER (+)  
6. 9G-0003 C [2] COVER (-)  
7. 9G-4232 C [2] BATTERY-12V  
    (EACH INCLUDES)
  7N-0060 [6] VENT AS  
8. 5M-9204 [1] TERMINAL AS (+)  
9. 5M-9205 [1] TERMINAL AS (-)  
    (EA TERM AS INCL)
10. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
11. 8L-8413 C [2] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP12970468
 

7L-7871: BATTERY GP

7L7871 BATTERY GP-24 VOLT, 172 AMPERE (925 CCA)
TYPE 2
AN ATTACHMENT
c627058 SEBP1297
7L7871 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 [1] CABLE AS  
  5P-0747 E CABLE-STARTING MOTOR (00 GA,20 CM)  
2. 8T-9757 [1] TERMINAL AS (NEG)  
3. 8C-5917 [1] TERMINAL AS (POS)  
4. 1M-6119 [2] BOLT (5/16-18X1.375 IN)  
  1M-6120 [2] NUT (5/16-18X1.375 IN)  
5. 9G-0004 [2] COVER (RED)  
6. 9G-0003 [2] COVER (BLACK)  
7. 9X-9720 [2] BATTERY (12 VOLT)  
  7N-0060 [6] VENT AS  
8. 8L-8413 [2] STRAP-CABLE (1.12IN DIA)  
  E   ORDER BY THE CENTIMETER
 

#SEBP12970469
 

7C-1976: BATTERY GP

7C1976 BATTERY GP-24 VOLT
67 AMPERE, LOW MAINTENANCE. TYPE 1
FOR USE WITH BATTERY SUPPORT
AN ATTACHMENT
c477974 SEBP1297
7C1976 BATTERY GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

Pos. Part No Qty Parts name Comments
1. 2V-7397 [1] CABLE AS  
  5P-0747 E CABLE 20CM  
2. 5M-9205 [1] TERMINAL AS (NEG)  
3. 5M-9204 [1] TERMINAL AS (POS)  
    (EA TERM AS INCL)
4. 1M-6119 [2] BOLT  
  1M-6120 [2] NUT  
5. 9G-0004 [2] COVER -TERM (POS)  
6. 9G-0003 [2] COVER -TERM (NEG)  
7. 9G-4234 [2] BATTERY-12V  
  7N-0060 [6] VENT AS  
8. 5M-9204 [1] TERMINAL AS (POS)  
9. 5M-9205 [1] TERMINAL AS (NEG)  
    (EA TERM AS INCL)
10. 1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
11. 8L-8413 [4] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/11/30
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Fuel Injection Timing Changed To 15° With New 3.5° Timing Advance
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Gear And Weight Assembly Used In Governor And Fuel Pump Drive Group {1272}
1995/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Converting 3208TA Pleasure Craft Marine Engines From 355BHP To 375BHP{1050, 1251, 1350, 1379}
Converting 3208TA Pleasure Craft Marine Engines From 355BHP To 375BHP{1050, 1251, 1350, 1379}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 MARINE ENGINE
Governor
3208 MARINE ENGINE
Fuel Transfer Pump
3208 MARINE ENGINE
Automatic Timing Advance Unit
3208 MARINE ENGINE
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Letter-APD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3208 MARINE ENGINE
Check Valve & Bypass Valve
3208 MARINE ENGINE
Fuel Injection Pumps
3208 MARINE ENGINE
Fuel Transfer Pump
3208 MARINE ENGINE
Fuel Injection Pump Housing
3208 MARINE ENGINE
Governor
3208 MARINE ENGINE
Automatic Timing Advance
3208 MARINE ENGINE
Service Magazine
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
New Spring Used In Governor Control Groups{1265}
1992/04/20
Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30

Caterpillar Parts SIS Catalog 3208 :

TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
CONTROL GP-FUEL RATIO
1W-0176 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
1W-3946 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
9N-6055 CONTROL GP-FUEL RATIO
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4P-1815 PUMP GP-GOV & FUEL INJ
CONTROL GP-GOVERNOR
4N-9399 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
BATTERY GP
7C-1900 BATTERY GP
BATTERY GP
7C-1899 BATTERY GP
BATTERY GP
7C-1900 BATTERY GP
BATTERY GP
7C-1977 BATTERY GP
BATTERY GP
7L-7871 BATTERY GP
BATTERY GP
7L-7871 BATTERY GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California