AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER HEAD VALVE GUIDES FIELD INSTALLATION 3208 ENGINE - MACHINE


BASIC ENGINE
CYLINDER HEAD GP
CYLINDER BLOCK GP
CRANKSHAFT GP
DAMPER GP
PULLEY GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 03Z
 3208 INDUSTRIAL ENGINE 03Z00001-10092 SEBP1304 3208 03Z   (2018)

BASIC ENGINE

CYLINDER HEAD GP
4W-3778 GUIDE-INLET VALVE
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
 

#SEBP13040050
 

4W-3778: GUIDE-INLET VALVE

CYLINDER HEAD VALVE GUIDES
FIELD INSTALLATION
SEBP13040050 SEBP1304
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
  4W-3778 VALVE GUIDE-INLET  
   
  4W-3779 VALVE GUIDE-EXHAUST  
   
    NOTE: QUANTITY TO BE DETERMINED BY USER
    SPECIAL TOOLS & PROCEDURES ARE
    REQUIRED
    SEE YOUR CATERPILLAR DEALER
 

#SEBP13040051
 

2W-1864: CYLINDER BLOCK GP

2W1864 BLOCK GP-SHORT*R
FIELD INSTALLATION
SEBP13040051 SEBP1304
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
  9N-6356 RY [1] CYLINDER BLOCK GP  
   
  9N-6222 Y [1] CRANKSHAFT GP  
   
  9N-6435 Y [8] ROD & PISTON GP  
   
  1W-9569 [1] KIT-CYLINDER BLOCK  
   
  1W-0036 [1] CRANKSHAFT SEAL GP-REAR  
   
    FORM SMHS7701
   
    FORM SMHS7100
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13040052
 

9N-2017: CRANKSHAFT GP

9N2017 CRANKSHAFT GP
S/N 3Z1-939
FOR FIELD REPLACEMENT OF 9N6221 CRANKSHAFT ASSEMBLY ORDER
2W0085 SERVICE CRANKSHAFT-PAGE 15A
c308500 SEBP1304
9N2017 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 [1] BEARING-MAIN  
2. 9N-5792 [3] BEARING-MAIN  
3. 9N-5791 [1] BEARING-THRUST  
4. 9N-6221 CR [1] CRANKSHAFT AS  
5. 9N-0299 [1] GEAR-CRANKSHAFT (51 TEETH)  
6. 9N-0286 [1] KEY  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13040053
 

9N-6222: CRANKSHAFT GP

9N6222 CRANKSHAFT GP
S/N 3Z940-1013
ALSO PART OF 1W1862 SHORT BLOCK-PAGE 13 &
2W1864 SHORT BLOCK-PAGE 13B
c230034 SEBP1304
9N6222 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5793 [1] BEARING-MAIN  
2. 9N-5792 [3] BEARING-MAIN  
3. 9N-5791 [1] BEARING-THRUST  
4. 9N-0305 R [1] CRANKSHAFT AS  
5. 9N-0299 [1] GEAR-CRANKSHAFT (51 TEETH)  
6. 9N-6677 [1] KEY-CRANKSHAFT  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13040054
 

2W-0085: CRANKSHAFT GP

2W0085 SERVICE CRANKSHAFT GP-FIELD INSTALLATION*R
PROVIDES FIELD REPLACEMENT FOR 9N6221 CRANKSHAFT ASSEMBLY-PAGES 14 & 15B
c456466 SEBP1304
2W0085 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0036 [1] SEAL GP-CRANKSHAFT  
2. 9N-6221 R [1] CRANKSHAFT AS  
3. 7N-6290 [1] GEAR (51 TEETH)  
4. 9N-6677 [1] KEY-CRANKSHAFT  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13040055
 

9N-6222: CRANKSHAFT GP

9N6222 CRANKSHAFT GP
S/N 3Z1014-UP
ALSO PART OF 1W1862, 2W1864 SHORT BLOCK
FOR FIELD REPLACEMENT OF 9N6221 CRANKSHAFT AS ORDER 2W0085-PAGE 15A
c456460 SEBP1304
9N6222 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-6221 R [1] CRANKSHAFT AS  
2. 9N-6677 [1] KEY-CRANKSHAFT  
3. 7N-6290 [1] GEAR (51 TEETH)  
4. 4W-8092 J [3] BEARING-MAIN (STANDARD)  
  8N-9021 AB [1] BEARING-MAIN (0.25MM O.S.)  
5. 4W-8091 J [1] BEARING-THRUST (STANDARD)  
  8N-9067 AB [1] BEARING-THRUST (0.25MM O.S.)  
6. 4W-8093 J [1] BEARING-MAIN (STANDARD)  
  8N-8973 AB [1] BEARING-MAIN (0.25MM O.S.)  
  AVAILABLE REPAIR KIT(S):  
  9Y-6202 J [1] KIT-MAIN BEARING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PARTS MARKED J
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13040056
 

9N-0542: SEAL GP-CRANKSHAFT

9N0542 SEAL GP-CRANKSHAFT
c467504 SEBP1304
9N0542 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6660 [1] SEAL GP-CRANKSHAFT  
2. 7W-3200 C [1] SEAL GP-CRANKSHAFT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13040057
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP13040057 SEBP1304
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  8N-8973 [1] BEARING-MAIN FRONT-NON GROOVED  
    (.25 MM OVERSIZE)
  8N-9021 [3] BEARING-MAIN INTERMEDIATE  
    (.25 MM OVERSIZE)
  8N-9067 [1] BEARING-THRUST-GROOVED  
    (.25 MM OVERSIZE)
  8N-8976 [1] BEARING-MAIN FRONT-NON GROOVED  
    (.25 MM UNDERSIZE)
  8N-9022 [3] BEARING-MAIN INTERMEDIATE-GROOVED  
    (.25 MM UNDERSIZE)
  8N-9065 [1] BEARING-THRUST-GROOVED  
    (.25 MM UNDERSIZE)
  8N-8972 [1] BEARING-MAIN FRONT-NON GROOVED  
    (.51 MM UNDERSIZE)
  8N-9023 [3] BEARING-MAIN INTERMEDIATE-GROOVED  
    (.51 MM UNDERSIZE)
  8N-9064 [1] BEARING-THRUST-GROOVED  
    (.51 MM UNDERSIZE)
  8N-8974 [1] BEARING-MAIN FRONT-NON GROOVED  
    (1.27 MM UNDERSIZE)
  8N-9020 [3] BEARING-MAIN INTERMEDIATE-GROOVED  
    (1.27 MM UNDERSIZE)
  8N-9066 [1] BEARING-THRUST-GROOVED  
    (1.27 MM UNDERSIZE)
  8N-8971 [1] BEARING-MAIN FRONT-NON GROOVED  
    (.25 MM OVERSIZE-.51 MM UNDERSIZE)
  8N-9019 [3] BEARING-MAIN INTERMEDIATE-GROOVED  
    (.25 MM OVERSIZE-.51 MM UNDERSIZE)
  8N-9068 [1] BEARING-THRUST-GROOVED  
    (.25 MM OVERSIZE-.51 MM UNDERSIZE)
  8N-8975 [1] BEARING-MAIN FRONT-NON GROOVED  
    (.25 MM OVERSIZE-1.27 MM UNDERSIZE)
  8N-9018 [3] BEARING-MAIN INTERMEDIATE-GROOVED  
    (.25 MM OVERSIZE-1.27 MM UNDERSIZE)
  8N-9069 [1] BEARING-THRUST-GROOVED  
    (.25 MM OVERSIZE-1.27 MM UNDERSIZE)
 

#SEBP13040058
 

9N-5590: DAMPER & PULLEY GP

9N5590 DAMPER & PULLEY GP
S/N 3Z1-7805
FIELD REPLACEMENT OF 1W6760 ORDER 7C6660 SEAL GP & 7C8118 DAMPER AS
c456483 SEBP1304
9N5590 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0293 [1] POINTER-TIMING  
2. 1W-6760 C [1] DAMPER AS-CRANKSHAFT  
3. 9N-5592 [1] SHIELD-DUST  
4. 9S-1368 [1] BOLT  
5. 9N-0288 [1] WASHER-CLAMP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13040059
 

9L-7461: PULLEY GP-CRANKSHAFT

9L7461 PULLEY GP-CRANKSHAFT
AUXILARY
8M8340 V-BELT SET (INCLUDES 2-8M8335 BELTS) IS AVAILABLE
AN ATTACHMENT
c201764 SEBP1304
9L7461 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0573 C [6] BOLT  
2. 9L-7245 C [1] PULLEY-AUXILIARY  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
New Rocker Arm Assemblies Used
1982/09/22
Resurfaced Cylinder Blocks And Heads
1982/11/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Improved Cylinder Head Gasket
1983/02/16
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/10/26
Correct Installation Of New Valve Springs
1983/11/30
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/01/18
Improved Cylinder Head Gasket
1984/06/20
New Relief Valve Guide Used In Oil Pump
1984/07/11
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines
1985/08/01
Head Gasket Replacement Procedure
1985/08/01
Improved Cylinder Head Gasket
1986/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Plastic Water Sleeve Used
1987/06/01
Check Plastic Water Sleeve If Engine Experiences Severe Overheating
1987/11/01
New Head Gasket Used
1989/05/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01
New Lifter Assembly Is Available For Turbocharged Engines {1209}
1996/09/23
New Chrome-Plated Stem On Exhaust Valve Increases Valve And Valve Guide Wear Life {1105,1100}
1997/06/23
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Installation of Head Gasket (With New Torque Procedure){1100}
Installation of Head Gasket (With New Torque Procedure){1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valve Seats And Inserts
3208 INDUSTRIAL ENGINE
Cylinder Head
3208 INDUSTRIAL ENGINE
Valve Seats And Inserts
3208 INDUSTRIAL ENGINE
Cylinder Head
3208 INDUSTRIAL ENGINE
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Cylinder Heads
3208 INDUSTRIAL ENGINE
Valve Covers
3208 INDUSTRIAL ENGINE
Cylinder Head Assemblies
3208 INDUSTRIAL ENGINE
Service Magazine
Larger Valve Springs{1108,1101,1252}
1981/05/04
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/04/25
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
New Plastic Water Sleeve Used{1380}
1987/05/18
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Used {1124}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1994/01/10
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06

Caterpillar Parts SIS Catalog 3208 :

CYLINDER BLOCK GP
2W-8035 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
1W-1862 CYLINDER BLOCK GP-SHORT
CYLINDER BLOCK GP
7E-4850 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7E-0036 CYLINDER BLOCK AS
CYLINDER BLOCK GP
9N-6356 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-6356 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-6356 CYLINDER BLOCK GP
2W-1864 CYLINDER BLOCK GP
CRANKSHAFT GP
9N-2017 CRANKSHAFT GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
CRANKSHAFT GP
2W-0085 CRANKSHAFT GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENTS
DAMPER & PULLEY GP
9N-5590 DAMPER & PULLEY GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.