AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C2236 PUMP GP-GOVERNOR & FUEL INJECTION-PART 3 OF 5 PART OF 7C2235 PUMP-GOVERNOR & FUEL INJECTION 3208


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL

ENGINE - MACHINE 3208 ENGINE - MACHINE 03Z
 3208 INDUSTRIAL ENGINE 03Z00001-10092 SEBP1304 3208 03Z   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
 

#SEBP13040440
 

7C-2236: PUMP GP-GOV & FUEL INJ

7C2236 PUMP GP-GOVERNOR & FUEL INJECTION-PART 3 OF 5
PART OF 7C2235 PUMP-GOVERNOR & FUEL INJECTION
c344869 SEBP1304
7C2236 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 6N-1729 [1] COVER-PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 4N-0935 [1] HOUSING AS (SHUT-OFF)  
11. 4N-3713 [1] SEAL-LIP TYPE  
12. 9N-5861 [1] HOUSING AS-PUMP  
  9N-6318 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 5P-4810 [1] BEARING  
17. 8N-0628 [1] BEARING  
18. 4N-2333 [1] PIN-SPRING  
19. 8N-0984 [8] PIN-SPRING  
20. 4N-5481 [1] STUD  
21. 1P-4001 [1] FITTING  
22. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
27. 4N-0940 [1] LEVER-SHUT-OFF  
28. 4N-0937 [1] SHAFT-LEVER  
29. 4N-0595 [1] GASKET-TOP COVER  
 

#SEBP13040441
 

7C-2236: PUMP GP-GOV & FUEL INJ

7C2236 PUMP GP-GOVERNOR & FUEL INJECTION-PART 4 OF 5
PART OF 7C2235 PUMP-GOVERNOR & FUEL INJECTION
c343258 SEBP1304
7C2236 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1359 [1] FLANGE-INLET  
2. 2M-5471 [2] BOLT  
3. 4N-3088 [1] GASKET-INLET  
4. 6N-1716 [1] VALVE AS  
5. 3J-7354 [1] SEAL-O-RING  
6. 9F-6641 [4] BOLT  
7. 4N-2954 [1] SLEEVE-CAMSHAFT  
8. 4N-1132 [1] BODY AS-TRANSFER PUMP  
9. 8S-6814 [1] PIN  
10. 4N-1584 [1] SEAL-LIP TYPE  
11. 4N-0636 [1] SEAL-LIP TYPE  
12. 8H-9804 [1] SHAFT-PUMP IDLER  
13. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
14. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
15. 5M-6509 [1] SEAL-O-RING  
16. 4N-1767 [1] VALVE-BYPASS  
17. 4N-0605 [1] SPRING  
18. 4N-0975 [1] GASKET-CHECK VALVE  
19. 7N-1364 [1] FLANGE AS-CHECK VALVE  
20. 1P-2298 [1] VALVE AS  
 

#SEBP13040442
 

7C-2236: PUMP GP-GOV & FUEL INJ

7C2236 PUMP GP-GOVERNOR & FUEL INJECTION-PART 5 OF 5
PART OF 7C2235 PUMP-GOVERNOR & FUEL INJECTION
c343324 SEBP1304
7C2236 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  7M-7219 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 9N-5858 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
 

#SEBP13040443
 

1W-2777: LINES GP-FUEL INJECTION

1W2777 FUEL INJECTION LINES GROUP-PART 1 OF 2
c230265 SEBP1304
1W2777 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6047 [1] LINE AS-FUEL INJ (NO 7)  
2. 9L-6045 [1] LINE AS-FUEL INJ (NO 5)  
3. 9N-1374 [1] LINE AS-FUEL INJ (NO 4)  
4. 9L-6046 [1] LINE AS-FUEL INJ (NO 6)  
5. 9L-9372 [4] LOCK-ADAPTER  
6. 9L-6048 [1] LINE AS-FUEL INJ (NO 8)  
7. 1W-2459 [8] CLAMP AS-NOZZLE  
8. 9N-3879 [8] SPACER-CLAMP  
9. 9N-3979 R [8] NOZZLE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [2] SEAL-O-RING  
  9N-3738 [1] WASHER-PLAIN  
10. 9L-9098 [1] SEAL-CARBON STOP  
11. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
12. 6F-4855 [1] SEAL-O-RING  
13. 9N-0863 [1] LINE AS-FUEL INJ (NO 3)  
14. 9L-6042 [1] LINE AS-FUEL INJ (NO 2)  
15. 9N-0861 [1] LINE AS-FUEL INJ (NO 1)  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13040444
 

1W-2777: LINES GP-FUEL INJECTION

1W2777 FUEL INJECTION LINES GROUP-PART 2 OF 2
c230266 SEBP1304
1W2777 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2050 [1] BRACKET  
2. 5P-4939 [16] SCREW AS-MACHINE  
3. 9L-8715 [3] CLAMP  
4. 9L-8716 [4] CLAMP (TAPPED)  
5. 9L-8713 [3] CLAMP-FUEL LINE  
6. 9L-8714 [6] CLAMP-FUEL LINE (TAPPED)  
7. 9L-9160 [3] CLAMP AS-LINE  
8. 9L-9251 [1] CLIP  
  9M-1974 [1] WASHER  
9. 9N-2064 [1] TUBE AS-BLEED  
10. 5P-3395 [1] ELBOW  
11. 8L-8413 [6] STRAP-CABLE  
12. 7K-8332 [1] INSERT-TUBE SUPPORT  
  6H-3687 F [8] PROTECTIVE CAP (FUEL NOZZLE TIP)  
  9L-7663 F [8] PROTECTIVE PLUG (FUEL NOZZLE TIP)  
  F   NOT SHOWN
 

#SEBP13040445
 

9N-3880: LINES GP-FUEL INJECTION

9N3880 FUEL INJECTION LINES GROUP-PART 1 OF 2
S/N 3Z1878-2460
c337579 SEBP1304
9N3880 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6047 [1] LINE AS-FUEL INJ (NO 7)  
2. 9L-6045 [1] LINE AS-FUEL INJ (NO 5)  
3. 9N-1374 [1] LINE AS-FUEL INJ (NO 4)  
4. 9L-6046 [1] LINE AS-FUEL INJ (NO 6)  
5. 9L-9372 [4] LOCK-ADAPTER  
6. 9L-6048 [1] LINE AS-FUEL INJ (NO 8)  
7. 1W-2459 C [8] CLAMP AS-NOZZLE  
8. 9N-3879 [8] SPACER-CLAMP  
9. 9N-3979 R [8] NOZZLE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [2] SEAL-O-RING  
  9N-3738 [1] WASHER-PLAIN  
10. 9L-9098 [1] SEAL-CARBON STOP  
11. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
12. 6F-4855 [1] SEAL-O-RING  
13. 9N-0863 [1] LINE AS-FUEL INJ (NO 3)  
14. 9L-6042 [1] LINE AS-FUEL INJ (NO 2)  
15. 9N-0861 [1] LINE AS-FUEL INJ (NO 1)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13040446
 

9N-3880: LINES GP-FUEL INJECTION

9N3880 FUEL INJECTION LINES GROUP-PART 2 OF 2
S/N 3Z1878-3Z2460
c227151 SEBP1304
9N3880 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2050 [1] BRACKET  
2. 5P-4939 [16] SCREW AS-MACHINE  
3. 9L-8715 [3] CLAMP  
4. 9L-8716 [4] CLAMP (TAPPED)  
5. 9L-8713 [3] CLAMP-FUEL LINE  
6. 9L-8714 [6] CLAMP-FUEL LINE (TAPPED)  
7. 9L-9160 [3] CLAMP AS-LINE  
8. 9L-9251 [1] CLIP  
  9M-1974 [1] WASHER  
9. 9N-2064 [1] TUBE AS-BLEED  
10. 5P-3395 [1] ELBOW  
11. 8L-8413 [6] STRAP-CABLE  
12. 7K-8332 [1] INSERT-TUBE SUPPORT  
  6H-3687 F [8] PROTECTIVE CAP (FUEL NOZZLE TIP)  
  9L-7663 F [8] PROTECTIVE PLUG (FUEL NOZZLE INLET)  
  F   NOT SHOWN
 

#SEBP13040447
 

9N-3880: LINES GP-FUEL INJECTION

9N3880 LINES GP-FUEL INJECTION
S/N 3Z2461-UP
2W3398-PAGE 69D & 2W0770-PAGE 69F
c330960 SEBP1304
9N3880 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-0770 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3398 Y [1] LINES GP-FUEL INJECTION  
3. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
4. 6F-4855 [1] SEAL-O-RING  
5. 1W-5829 R [8] NOZZLE AS-FUEL  
    (EACH INCLUDES)
  1H-1023 [2] SEAL-O-RING  
  9N-3738 [1] WASHER-PLAIN  
6. 9L-9098 [1] SEAL-CARBON STOP  
7. 1W-2459 [8] CLAMP AS-NOZZLE  
8. 9N-3879 [8] SPACER-CLAMP  
9. 9L-9372 [4] LOCK-ADAPTER  
10. 9N-2064 [1] TUBE AS-BLEED  
11. 7K-8332 [1] INSERT-TUBE SUPPORT  
12. 9L-9251 [1] CLIP  
13. 9M-1974 [1] WASHER  
14. 9N-2050 [1] BRACKET  
15. 9L-8716 [1] CLAMP (TAPPED)  
16. 5P-4939 [1] SCREW AS-MACHINE  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13040448
 

4W-5800: LINES GP-FUEL INJECTION

4W5800 LINES GP-FUEL INJECTION
4W5799-PAGE 69C.02 & 4W5798-PAGE 69E
c402349 SEBP1304
4W5800 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5799 Y [1] LINES GP-FUEL INJECTION  
2. 9N-2050 [1] BRACKET  
  7W-4151 C [1] CLAMP-FUEL LINE  
3. 5P-4939 [1] SCREW AS-MACHINE  
4. 9N-2064 [1] TUBE AS-BLEED  
  5P-6011 BD TUBE  
5. 5P-3395 [1] ELBOW  
6. 8L-8413 [6] STRAP-CABLE  
7. 7K-8332 [1] INSERT-TUBE SUPPORT  
8. 9L-9251 [1] CLIP  
  9M-1974 [1] WASHER  
9. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
10. 6F-4855 [1] SEAL-O-RING  
11. 4W-7011 R [8] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  6M-5062 [1] SEAL-O-RING (SMALL)  
  1S-8947 [1] SEAL-O-RING (LARGE)  
  2W-1230 [1] SCREW-BUTTON HEAD  
  1W-8616 C [1] WASHER-SEALING  
12. 9L-9098 [1] SEAL-CARBON STOP  
13. 4W-3914 [1] WASHER  
14. 4W-5798 Y [1] LINES GP-FUEL INJECTION  
15. 8N-5132 [8] CLAMP-NOZZLE  
16. 1T-0416 [8] BOLT  
17. 9L-9372 [4] LOCK-ADAPTER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13040449
 

9Y-0300: LINES GP-FUEL INJECTION

9Y0300 LINES GP-FUEL INJECTION
PART OF 7W1998 LINES FUEL INJECTION
c473505 SEBP1304
9Y0300 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0147 [1] LINE AS-FUEL INJ (NO 7)  
2. 9Y-0145 [1] LINE AS-FUEL INJ (NO 5)  
3. 9L-8715 [1] CLAMP  
4. 9L-8716 [1] CLAMP  
5. 5P-4939 [3] SCREW AS-MACHINE  
6. 9L-9160 [1] CLAMP AS-LINE  
7. 9L-8714 [1] CLAMP-FUEL LINE  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Australia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CFEL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CSARL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Americas
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Specifications
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Asia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-APD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Check Valve And Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Automatic Timing Advance
3208 INDUSTRIAL ENGINE
Governor & Fuel Pump Drive
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Shutoff Housing, Check Valve & Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9451 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9451 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9451 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9451 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9451 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9451 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-2236 PUMP GP-GOV & FUEL INJ
LINES GP-FUEL INJECTION
1W-2777 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-2777 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9N-3880 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9N-3880 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9N-3880 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-5800 LINES GP-FUEL INJECTION

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.