AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



TRACK-TYPE TRACTOR D9L TRACK-TYPE TRACTOR 14Y
 D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE SEBP1305 D9L 14Y   (1980)

Parts group D9L:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
AIR CLEANER GP
6N-1335 AIR CLEANER GP
6N1335 AIR CLEANER GROUP
7N0688 CLEANER PARTS ARE SHOWN ON PAGE 55.01
2P2508 PRE-CLEANER HOOD ASSEMBLY IS AVAILABLE
AIR CLEANER GP
7N-0688 AIR CLEANER GP
7N0688 AIR CLEANER GROUP
PART OF 6N1335 AIR CLEANER GROUP SHOWN ON PAGE 55
DUST EJECTOR GP
6N-1380 DUST EJECTOR GP
6N1380 DUST EJECTOR GROUP
SERIAL NO. 14Y1 TO 14Y2938 INCLUSIVE
4W1508 CHECK VALVE IS AVAILABLE
DUST EJECTOR GP
6N-1380 DUST EJECTOR GP
6N1380 DUST EJECTOR GP
S/N 14Y2939-3007
4W1508 CHECK VALVE AS. IS AVAILABLE
DUST EJECTOR GP
6N-1380 DUST EJECTOR GP
6N1380 DUST EJECTOR GP
S/N 14Y3008-UP
LINES GP-AIR
LINES GP-AIR
6N-1361 LINES GP-AIR
6N1361 AIR LINES GROUP-PART 1 OF 2
LINES GP-AIR
6N-1361 LINES GP-AIR
6N1361 AIR LINES GROUP-PART 2 OF 2
LINES GP-AIR
8N-0746 LINES GP-AIR
8N0746 AIR LINES GROUP
SERIAL NO. 14Y1 TO 14Y990 INCLUSIVE
LINES GP-AIR
8N-0746 LINES GP-AIR
8N0746 AIR LINES GROUP
SERIAL NO. 14Y991 TO 14Y1047 INCLUSIVE
LINES GP-AIR
8N-0746 LINES GP-AIR
8N0746 AIR LINES GROUP
SERIAL NO. 14Y1048 TO 2049,2051 TO 2321,2331,2335,2359,2364,2365,
2367,2368,2373,2374,2388,2407,2412,2418,2420,2421,2429,2430,2445,
2452,2453,2463,2464,2466,2467 & 14Y2470 TO 14Y2495 INCLUSIVE
LINES GP-AIR
8N-0746 LINES GP-AIR
8N0746 AIR LINES GROUP
SERIAL NO. 14Y2050, 2322-2330, 2332-2334, 2336-2358, 2360-2363, 2366,
2369-2372, 2375-2387, 2389-2406, 2408-2411, 2413-2417, 2419, 2422-
2428, 2431-2444, 2446-2451, 2454-2462, 2465, 2468, 2469, & 14Y2496-
14Y2698 INCLUSIVE
LINES GP-AIR
8N-0746 LINES GP-AIR
8N0746 AIR LINES GROUP
SERIAL NO. 14Y2699-UP
MANIFOLD GP-EXHAUST
SHIELD GP-MANIFOLD
7N-1328 SHIELD GP-MANIFOLD
7N1328 MANIFOLD SHIELD GROUP-PART 1
SERIAL NO. 14Y1 TO 14Y1047 INCLUSIVE
SHIELD GP-MANIFOLD
7N-1328 SHIELD GP-MANIFOLD
7N1328 MANIFOLD SHIELD GROUP-PART 2
SERIAL NO. 14Y1 TO 14Y1047 INCLUSIVE
SHIELD GP-MANIFOLD
7N-1328 SHIELD GP-MANIFOLD
7N1328 MANIFOLD SHIELD GROUP-PART 1
SERIAL NO. 14Y1048-UP
SHIELD GP-MANIFOLD
7N-1328 SHIELD GP-MANIFOLD
7N1328 MANIFOLD SHIELD GROUP-PART 2 OF 2
SERIAL NO. 14Y1048-UP
MANIFOLD GP-EXHAUST
8N-0617 MANIFOLD GP-EXHAUST
8N617 EXHAUST MANIFOLD GROUP
MUFFLER GP
MUFFLER GP
8N-0745 MUFFLER GP
8N0745 MUFFLER GROUP-PART 1
NOTE: 4W5511 ADAPTER ASSEMBLY IS AVAILABLE FOR SERVICE REPLACEMENT OF
8N1495 MUFFLER ASSEMBLY WHEN USED WITH 8N9961 ELBOW
FOR SERIAL NO. REFER TO PART 2-PAGE 59A
8N-0745 MUFFLER GP
8N0745 MUFFLER GROUP-PART 2
FOR ILLUSTRATION REFER TO PART 1-PAGE 59
MUFFLER GROUP
8N0745 MUFFLER GROUP-PART 2
FOR ILLUSTRATION REFER TO PART 1-PAGE 59B
MUFFLER GP
8N-0745 MUFFLER GP
8N0745 MUFFLER GROUP-PART 1
FOR SERIAL NO. REFER TO PART 2-PAGE 59B
TURBOCHARGER GP
LINES GP-TURBOCHARGER WATER
8N-0616 LINES GP-TURBOCHARGER WATER
8N0616 TURBOCHARGER WATER LINES GROUP
ENGINE SERIAL NO. 73W4762 TO 73W4955 INCLUSIVE
LINES GP-TURBOCHARGER WATER
8N-0616 LINES GP-TURBOCHARGER WATER
8N0616 TURBOCHARGER WATER LINES GROUP
SERIAL NO. 73W1224 TO 73W4761 INCLUSIVE
LINES GP-TURBOCHARGER WATER
8N-0616 LINES GP-TURBOCHARGER WATER
8N0616 LINES GP-TURBOCHARGER WATER
S/N 73W6028-6344
LINES GP-TURBOCHARGER WATER
8N-0616 LINES GP-TURBOCHARGER WATER
8N0616 TURBOCHARGER WATER LINES GROUP
ENGINE SERIAL NO. 73W4956 TO 73W6027 INCLUSIVE
LINES GP-TURBOCHARGER WATER
8N-0616 LINES GP-TURBOCHARGER WATER
8N0616 LINES GP-TURBOCHARGER WATER
S/N 73W6345-7400
LINES GP-TURBOCHARGER WATER
8N-0616 LINES GP-TURBOCHARGER WATER
8N0616 LINES GP-TURBOCHARGER WATER
S/N 73W7401-UP
LINES GP-TURBOCHARGER OIL
6N-1364 LINES GP-TURBOCHARGER OIL
6N1364 TURBOCHARGER OIL LINES GROUP
ENGINE SERIAL NO. 73W1224 TO 73W1552 INCLUSIVE
LINES GP-TURBOCHARGER OIL
6N-1364 LINES GP-TURBOCHARGER OIL
6N1364 TURBOCHARGER OIL LINES GROUP
ENGINE SERIAL NO. 73W1553 TO 73W5385 INCLUSIVE
LINES GP-TURBOCHARGER OIL
4W-7504 LINES GP-TURBOCHARGER OIL
4W7504 TURBOCHARGER OIL LINES GROUP
ENGINE SERIAL NO. 73W5386-UP
TURBOCHARGER GP
6N-1362 TURBOCHARGER GP
6N1362 TURBOCHARGER GROUP
ENGINE SERIAL NO. 73W4956-UP
2W5697-PAGE 50
TURBOCHARGER GP
6N-1362 TURBOCHARGER GP
6N1362 TURBOCHARGER GROUP
ENGINE SERIAL NO. 73W1224 TO 73W4955 INCLUSIVE
1W2503-PAGE 50
TURBOCHARGER GP
2W-5697 TURBOCHARGER GP
2W5697 TURBOCHARGER GROUP*R
ENGINE SERIAL NO. 73W4956-UP
7N9399-PAGE 51
PART OF 6N1362 TURBOCHARGER
TURBOCHARGER GP
1W-2503 TURBOCHARGER GP
1W2503 TURBOCHARGER GROUP-BASIC
ENGINE SERIAL NO. 73W1224 TO 73W4955 INCLUSIVE
7N9399-PAGE 51
PART OF 6N1362 TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7N-9399 CARTRIDGE GP-TURBOCHARGER
7N9399 TURBOCHARGER CARTRIDGE GROUP*R
PART OF 1W2503 & 2W5697 TURBOCHARGER

Information:

(For parts list, see above)

Disassembly and Assembly
Aftercooler D10N
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS
Aftercooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Aftercooler - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
A New Aftercooler Gasket and a New Torque Tightening Sequence is Now Used {1063}
2005/04/18
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Dust Ejector Group
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaner Group
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Air Cleaner Housing
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS
Clean Air Filters
D9L Tractor Operator's Station
Service Magazine
Air Cleaner Service Indicator Now Installed In A Vertical Position{7452}
1981/08/31
Separate Gasket Now Available For Air Cleaner{1051}
1983/08/08
Larger Capacity Precleaners Available{1055}
1985/05/20
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Disassembly and Assembly
Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Inspection Of Laminated Thermo-Shield Before Installation{1067}
1982/03/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Removal Of Flammable Fluids From Laminated Thermo-Shields{1067}
1983/08/08
New Parts Service Flange Can Extend Muffler Service Life{1062,1061}
1983/08/22
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Service Magazine
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
New Seal Used In Air Lines Group {1058}
1994/03/21
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Inlet Air And Exhaust Lines
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Elbows And Coupling Will Decrease Exhaust Gas Leakage; New Muffler Assembly{1058}
1984/04/09
New Tube Assemblies Used In Air Lines Groups{1058}
1992/03/02
New Seal Used In Air Lines Group {1058}
1994/03/21
Specifications
Exhaust Manifolds
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Testing and Adjusting
Exhaust Temperature - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Exhaust Manifolds
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS
Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Inspection Of Laminated Thermo-Shield Before Installation{1067}
1982/03/29
Removal Of Flammable Fluids From Laminated Thermo-Shields{1067}
1983/08/08
Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
New Exhaust Manifold Stud Available{1059}
1990/02/12
New Exhaust Manifolds, Longer Mounting Studs And Spacers Used In Exhaust Manifold Groups {1059}
1994/08/29
New Thicker Exhaust Manifold Gasket Used{1059}
1995/08/28
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Testing and Adjusting
Inlet Manifold Pressure - Test
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Elbows And Coupling Will Decrease Exhaust Gas Leakage; New Muffler Assembly{1058}
1984/04/09
New Seal Used In Air Lines Group {1058}
1994/03/21
Disassembly and Assembly
Clean Air Filters
D9L Tractor Operator's Station
Service Magazine
Air Cleaner Service Indicator Now Installed In A Vertical Position{7452}
1981/08/31
Inspection Of Laminated Thermo-Shield Before Installation{1067}
1982/03/29
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Removal Of Flammable Fluids From Laminated Thermo-Shields{1067}
1983/08/08
New Parts Service Flange Can Extend Muffler Service Life{1062,1061}
1983/08/22
New Elbows And Coupling Will Decrease Exhaust Gas Leakage; New Muffler Assembly{1058}
1984/04/09
Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08
Larger Capacity Precleaners Available{1055}
1985/05/20
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Exhaust Manifold Stud Available{1059}
1990/02/12
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Repair Of D9L Muffler Assembly{1062}
Repair Of D9L Muffler Assembly{1062}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Parts Service Flange Can Extend Muffler Service Life{1062,1061}
1983/08/22
New Elbows And Coupling Will Decrease Exhaust Gas Leakage; New Muffler Assembly{1058}
1984/04/09
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
7W4874 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Inlet Air And Exhaust Lines
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbochargers
3412 ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbocharger
3412 VEHICULAR ENGINE FOR D9L & D10N TRACTORS
Turbocharger - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
New Elbows And Coupling Will Decrease Exhaust Gas Leakage; New Muffler Assembly{1058}
1984/04/09
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Seal Used In Air Lines Group {1058}
1994/03/21
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
New Seal Used In Air Lines Group {1058}
1994/03/21
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Tool Operating Manual
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Service Magazine
Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/09/11
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14

Truck sale:

Caterpillar D9L
 
Caterpillar D9L
- Crawler dozers
N C MACHINERY CO.
Caterpillar D9L, Construction
39,908 
Caterpillar D9L, Construction
- Dozers
MICHIGAN CAT
Caterpillar D9L, Construction
50,000 
Caterpillar D9L, Construction
- Dozers
QUINN COMPANY
CATERPILLAR D9L 1982
 
CATERPILLAR D9L 1982
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
CATERPILLAR D9L 1987
 
CATERPILLAR D9L 1987
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.