AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE IMPLEMENTS Caterpillar SIS



TRACK-TYPE TRACTOR D9L TRACK-TYPE TRACTOR 14Y
 D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE SEBP1305 D9L 14Y   (1980)

Parts group D9L:

  For full view, you need register
IMPLEMENTS
BRACE GP
BRACE GP-BULLDOZER
3G-7845 BRACE GP-BULLDOZER
3G7845 BULLDOZER BRACE GROUP
PART OF 9J6674 PUSH ARM
BULLDOZER GP
3G-4893 BULLDOZER AR-CUSHION
3G4893 BULLDOZER ARRANGEMENT-CUSHION
REPLACED BY 4T9544-PAGE 246.01
9C BULLDZER S/N 20Y1-UP
SLSO PART OF 3G4894 BULLDOZER AR-PAGE 246
3G-4894 BULLDOZER AR-CUSHION
3G4894 BULLDOZER ARRANGEMENT-CUSHION-REPLACED BY 4T9545
REPLACED BY 4T9545-PAGE 246.01
FOR USE WITH 9 P6465, 9P6466 OR9P6467 HYDRULICCONTROL ARS
LISTED ON PAGE 191 & 192, AN ATTACHMENT
4T-9544 BULLDOZER AR-CUSHION
4T9544 CUSHION BULLDOZER ARRANGEMENT
9C BULLDOZER S/N 20Y1-UP
AN ATTACHMENT
4T-9545 BULLDOZER AR-CUSHION
4T9545 BULLDOZER AR
9C BULLDOZER S/N 20Y1-UP
AN ATTACHMENT
3G-3229 BULLDOZER AR-STRAIGHT
3G3229 BULLDOZER ARRANGEMENT-STRAIGHT
9S BULLDOZER SERIAL NO. 18Y1-UP AND 52Y1-UP
ALSO PART OF 3G3230 BULLDOZER ARRANGEMENT LISTED ON PAGE 247
3G-3230 BULLDOZER AR-STRAIGHT
3G3230 BULLDOZER ARRANGEMENT-STRAIGHT-TYPE 1
FOR USE WITH 6P4400, 9P1704 OR 9P6468 HYDRAULIC CONTROL
ARRANGEMENTS LISTED ON PAGES 190 AND 191. AN ATTACHMENT
3G-3230 BULLDOZER AR-STRAIGHT
3G3230 BULLDOZER AR-STRAIGHT-TYPE 2
FOR USE WITH 9P1704, 9P6468 OR 6P4400 HYDRAULIC CONTROL
ARRANGEMENT LISTED ON PAGES 190 & 191
AN ATTACHMENT
3G-3231 BULLDOZER AR-UNIVERSAL
3G3231 BULLDOZER ARRANGEMENT-UNIVERSAL
9U BULLDOZER SERIAL NO. 19Y1 TO 19Y1474 INCLUSIVE
ALSO PART OF 3G3232 BULLDOZER ARRANGEMENT LISTED ON PAGE 248
3G-3232 BULLDOZER AR-UNIVERSAL
3G3232 BULLDOZER ARRANGEMENT-UNIVERSAL
9U BULLDOZER SERIAL NO. 19Y1 TO 19Y1474 INCLUSIVE
FOR USE WITH 6P4400, 9P1704 OR 9P6468 HYDRAULIC CONTROL ARRANGEMENTS
LISTED ON PAGES 190 AND 191. AN ATTACHMENT
3G-3232 BULLDOZER AR-UNIVERSAL
3G3232 BULLDOZER ARRANGEMENT-UNIVERSAL
9U BULLDOZER SERIAL NO. 19Y1475-UP
FOR USE WITH 6P4400, 9P1704 OR 9P6468 HYDRAULIC CONTROL ARRANGEMENT
LISTED ON PAGES 190 & 191. AN ATTACHMENT
4T-7174 BULLDOZER AR-STRAIGHT
4T7174 STRAIGHT BULLDOZER ARRANGEMENT-WEAR PLATED
9S BULLDOZER SERIAL NO. 18Y1-UP
AN ATTACHMENT
4T-7165 BULLDOZER AR-STRAIGHT
4T7165 BULLDOZER ARRANGEMENT-STRAIGHT-PUSH PLATE
9S BULLDOZER SERIAL NO. 18Y1-UP
AN ATTACHMENT
4T-7468 BULLDOZER AR-UNIVERSAL
4T7468 BULLDOZER ARRANGEMENT-UNIVERSAL-WEAR PLATED
9U BULLDOZER SERIAL NO. 19Y1-UP
AN ATTACHMENT
TRUNNION GP-BULLDOZER
9J-6073 TRUNNION GP-BULLDOZER
9J6073 BULLDOZER TRUNNION GROUP
PART OF 4T7165, 4T7174 & 4T7468 BULLDOZERS ARRANGEMENTS
AN ATTACHMENT
TRUNNION GP-BULLDOZER
7T-5127 TRUNNION GP-BULLDOZER
7T5127 BULLDOZER TRUNNION GROUP
PART OF 7T5128 CYLINDER ARRANGEMENT
AN ATTACHMENT
LINK GP-STABILIZER
9J-6061 LINK GP-STABILIZER
9J6061 LINK GROUP-STABILIZER
PART OF 9J6674 PUSH ARM
LINK GP-STABILIZER
4T-6416 LINK GP-STABILIZER
4T6416 STABILIZER LINK GROUP
PART OF 7T5128 CYLINDER ARRANGEMENT
AN ATTACHMENT
C-FRAME GP
FRAME GP
3G-4575 FRAME GP
3G4575 C-FRAME GROUP
PART OF 3G4893 & 4T9545 BULLDOZER ARRANGEMENTS
CLUTCH & GEAR GP
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 1 OF 6-TYPE 1
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 2 OF 6-TYPE 1
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 3 OF 6-TYPE 1
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 4 OF 6-TYPE 1
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 5 OF 6-TYPE 1
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 6 OF 6-TYPE 1
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 1 OF 6-TYPE 2
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 2 OF 6-TYPE 2
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 3 OF 6-TYPE 2
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 4 OF 6-TYPE 2
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 5 OF 6-TYPE 2
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 6 OF 6-TYPE 2
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 1 OF 6-TYPE 3
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 2 OF 6-TYPE 3
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 3 OF 6-TYPE 3
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 4 OF 6-TYPE 3
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 5 OF 6-TYPE 3
PART OF 7G1174 AND 6T8918 WINCHES
CLUTCH & GEAR GP
7G-1175 CLUTCH & GEAR GP
7G1175 CLUTCH AND GEAR GROUP-PART 6 OF 6-TYPE 3
PART OF 7G1174 AND 6T8918 WINCHES
CONTROL GP
SWITCH & HANDLE GP
7T-0362 SWITCH & HANDLE GP
7T0362 HANDLE & SWITCH GP
PART OF 7T7931 IMPLEMENT LINKAGE
AN ATTACHMENT
FILTER GP
BYPASS GP-FILTER
3T-5036 BYPASS GP-FILTER
3T5036 FILTER BYPASS GROUP
PART OF 3T4993 WINCH CONTROL GROUP SHOWN ON PAGE 288
FRAME GP
FRAME GP
3G-4575 FRAME GP
3G4575 C-FRAME GROUP
PART OF 3G4893 & 4T9545 BULLDOZER ARRANGEMENTS
REINFORCEMENT GP
7T-4780 REINFORCEMENT GP
7T4780 REINFORCEMENT GROUP - RIPPER
TO REINFORCE RIPPER CARRIAGE AND LOWER FRAME ASSEMBLY
FRAME GP-RIPPER
9J-7332 FRAME GP-RIPPER
9J7332 RIPPER FRAME GROUP
REPLACED BY 9W3227-PAGE 269.01
PART OF 3G3989 RIPPER ARRANGEMENT LISTED ON PAGE 265
AN ATTACHMENT
FRAME GP-RIPPER
9W-3227 FRAME GP-RIPPER
9W3227 FRAME GP-RIPPER
REPLACES 9J7332 RIPPER FRAME
PART OF 3G3989 RIPPER
AN ATTACHMENT
FRAME GP-RIPPER
3G-2599 FRAME GP-RIPPER
3G2599 RIPPER FRAME GROUP-TYPE 1
AN ATTACHMENT
FRAME GP-RIPPER
3G-2599 FRAME GP-RIPPER
3G2599 RIPPER FRAME GROUP-TYPE 2
AN ATTACHMENT
FRAME GP-RIPPER
3G-2599 FRAME GP-RIPPER
3G2599 RIPPER FRAME GROUP-TYPE 3
AN ATTACHMENT
GEAR GP
GEAR GP-ACCESSORY
8N-7507 GEAR GP-ACCESSORY
8N7507 ACCESSORY GEAR GROUP-TYPE 1
PART OF 7G1173 WINCH
AN ATTACHMENT
GEAR GP-ACCESSORY
8N-7507 GEAR GP-ACCESSORY
8N7507 ACCESSORY GEAR GROUP-TYPE 2
PART OF 7G1173 WINCH
AN ATTACHMENT
INSTALLATION GP
7T-3910 INSTALLATION AR
7T3910 INSTALLATION AR-WINCH
FOR USE WITH 6T8918 OR 6T0070 WINCHES
AN ATTACHMENT
LINK GP
3G-3991 LINK AR
3G3991 LINK ARRANGEMENT
RIPPER SERIAL NO. 64Y1-UP AND 65Y1-UP. FOR USE WITH 3G3438 OR 3G3989
RIPPER ARRANGEMENTS SHOWN ON PAGES 264 AND 265. AN ATTACHMENT
LINKAGE GP
LINKAGE GP-IMPLEMENT
9P-1470 LINKAGE GP-IMPLEMENT
9P1470 IMPLEMENT LINKAGE GROUP-BULLDOZER-TOP VIEW-PART 1 OF 2-TYPE 1
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
9P-1470 LINKAGE GP-IMPLEMENT
9P1470 IMPLEMENT LINKAGE GROUP-BULLDOZER-SIDE VIEW-PART 2 OF 2-TYPE 1
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
9P-1470 LINKAGE GP-IMPLEMENT
9P1470 IMPLEMENT LINKAGE GROUP-BULLDOZER-TOP VIEW-PART 1 OF 2-TYPE 2
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
9P-1470 LINKAGE GP-IMPLEMENT
9P1470 IMPLEMENT LINKAGE GROUP-BULLDOZER-SIDE VIEW-PART 2 OF 2-TYPE 2
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
9P-1470 LINKAGE GP-IMPLEMENT
9P1470 BULLDOZER IMPLEMENT LINKAGE GP-TOP VIEW-PART 1 OF 2-TYPE 3
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
9P-1470 LINKAGE GP-IMPLEMENT
9P1470 BULLDOZER IMPLEMENT LINKAGE GP-SIDE VIEW-PART 2 OF 2-TYPE 3
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
6P-8841 LINKAGE GP-IMPLEMENT
6P8841 IMPLEMENT LINKAGE GROUP-BULLDOZER & TILT-PART 1 OF 2-TYPE 1
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
6P-8841 LINKAGE GP-IMPLEMENT
6P8841 IMPLEMENT LINKAGE GROUP-BULLDOZER & TILT-PART 2 OF 2
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
6P-8841 LINKAGE GP-IMPLEMENT
6P8841 IMPLEMENT LINKAGE GROUP-BULLDOZER & TILT-PART 1 OF 2-TYPE 2
S/N 14Y1-3133
LINKAGE GP-IMPLEMENT
6P-8841 LINKAGE GP-IMPLEMENT
6P8841 IMPLEMENT LINKAGE GROUP-BULLDOZER & TILT-PART 2 OF 2-TYPE 2
S/N 14Y1-3133
LINKAGE GP-IMPLEMENT
6T-7165 LINKAGE GP-IMPLEMENT
6T7165 IMPLEMENT LINKAGE GROUP-BULLDOZER & TILT-PART 1 OF 2
S/N 14Y3134-UP
LINKAGE GP-IMPLEMENT
6T-7165 LINKAGE GP-IMPLEMENT
6T7165 IMPLEMENT LINKAGE GROUP-BULLDOZER & TILT-PART 2 OF 2
S/N 14Y3134-UP
LINKAGE GP-IMPLEMENT
8P-0922 LINKAGE GP-IMPLEMENT
8P0922 IMPLEMENT LINKAGE GROUP-ADJUSTABLE RIPPER
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
6P-4397 LINKAGE GP-IMPLEMENT
6P4397 IMPLEMENT LINKAGE GROUP-RIPPER-TYPE 1
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
6P-4397 LINKAGE GP-IMPLEMENT
6P4397 IMPLEMENT LINKAGE GROUP-RIPPER-TYPE 2
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
3T-9376 LINKAGE GP-IMPLEMENT
3T9376 IMPLEMENT LINKAGE GROUP-ADJUSTABLE RIPPER
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
3T-2594 LINKAGE GP-IMPLEMENT
3T2594 LINKAGE GP-LINKAGE
ADJUSTABLE RIPPER & RIPPER
S/N 14Y3134-UP
PART OF 7T9494 CONTROL AR
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
7T-7931 LINKAGE GP-IMPLEMENT
7T7931 LINKAGE GP-IMPLEMENT-DUAL TILT-TYPE 1
7T0362-PAGE 242
PART OF 7T9455 HYDRAULIC CONTROL
AN ATTACHMENT
LINKAGE GP-IMPLEMENT
7T-7931 LINKAGE GP-IMPLEMENT
7T7931 LINKAGE GP-IMPLEMENT-DUAL TILT-TYPE 2
7T0362-PAGE 242
PART OF 7T9455 HYDRAULIC CONTROL
AN ATTACHMENT
PUSH ARM GP
PLATE-PUSH
1U-0902 PLATE-PUSH
1U0902 PUSH PLATE GROUP
9S BULLDOZER SERIAL NO. 18Y1-UP AND 56Y1-UP
AN ATTACHMENT
PLATE GP-PUSH
4T-3492 PLATE GP-PUSH
4T3492 PUSH PLATE GROUP
9S BULLDOZER SERIAL NO. 18Y1-UP
AN ATTACHMENT
PUSH ARM GP-STABILIZER
9J-6674 PUSH ARM GP-STABILIZER
9J6674 PUSH ARM GP-STABILIZER
9J6061 & 3G7845-PAGE 260, 3G8661-PAGE 261, 9J6677-PAGE 262
9J6678-PAGE 263. PART OF 3G3229, 3G3232, 4T7165, 4T7174 & 4T7468
BULLDOZER ARRANGEMENTS
PUSH ARM GP-RH
9J-6677 PUSH ARM GP-RH
9J6677 PUSH ARM GROUP-R.H.
PART OF 9J6674 PUSH ARM
PUSH ARM GP-RH
9J-6677 PUSH ARM GP-RH
9J6677 PUSH ARM GROUP-RIGHT HAND
SERIAL NO. 18Y1856-UP & 19Y1465-UP
PART OF 9J6674 PUSH ARM
PUSH ARM GP-LH
9J-6678 PUSH ARM GP-LH
9J6678 PUSH ARM GROUP-L.H.
PART OF 9J6674 PUSH ARM
PUSH ARM GP-LH
9J-6678 PUSH ARM GP-LH
9J6678 PUSH ARM GROUP-LEFT HAND
SERIAL NO. 18Y1856-UP & 19Y1465-UP
PART OF 9J6674 PUSH ARM
TRUNNION GP
TRUNNION & GUARD GP
3G-6371 TRUNNION & GUARD GP
3G6371 TRUNNION AND CRANKCASE GUARD GROUP-TYPE 1
PART OF 3G4894 BULLDOZER ARRANGEMENT LISTED ON PAGE 246
AN ATTACHMENT
TRUNNION & GUARD GP
3G-6371 TRUNNION & GUARD GP
3G6371 TRUNNION AND CRANKCASE GUARD GROUP-TYPE 2
PART OF 3G4894 BULLDOZER ARRANGEMENT LISTED ON PAGE 246
AN ATTACHMENT
TRUNNION & GUARD GP
3G-6371 TRUNNION & GUARD GP
3G6371 TRUNNION AND CRANKCASE GUARD GROUP-TYPE 3
PART OF 3G4894 BULLDOZER ARRANGEMENT LISTED ON PAGE 246
AN ATTACHMENT
VALVE GP
VALVE GP
3T-8650 VALVE GP
3T8650 SELECTOR PRESSURE AND FLOW CONTROL VALVE GROUP
WINCH SERIAL NO. 66Y394-UP
PART OF 3T4993 WINCH CONTROL GROUP SHOWN ON PAGE 288A
3T8649 AND 3P4121 VALVE PARTS ARE SHOWN ON PAGES 290A AND 291
VALVE GP
2P-3640 VALVE GP
2P3640 VALVE GROUP-SELECTOR, PRESSURE & FLOW CONTROL
WINCH SERIAL NO. 66Y1 TO 66Y393 INCLUSIVE
PART OF 3T4993 WINCH CONTROL GROUP SHOWN ON PAGE 288
8P1392 AND 3P4121 VALVE PARTS ARE SHOWN ON PAGES 290 AND 291
VALVE GP-PRESSURE CONTROL
8P-1392 VALVE GP-PRESSURE CONTROL
8P1392 PRESSURE CONTROL VALVE GROUP
SERIAL NO. 66Y1 TO 66Y393 INCLUSIVE
PART OF 2P3640 VALVE GROUP SHOWN ON PAGE 289
VALVE GP-PRESSURE CONTROL
3T-8649 VALVE GP-PRESSURE CONTROL
3T8649 PRESSURE CONTROL VALVE GROUP
WINCH SERIAL NO. 66Y394-UP
PART OF 3T8650 CONTROL GROUP SHOWN ON PAGE 289
VALVE GP-SELECTOR
3P-4121 VALVE GP-SELECTOR
3P4121 SELECTOR AND FLOW CONTROL VALVE GROUP
PART OF 2P3640 VALVE GROUP SHOWN ON PAGE 289
PUMP GP
PUMP GP-GEAR
7G-6788 PUMP GP-GEAR
7G6788 GEAR PUMP GROUP
7G6787-PAGE 281
AN ATTACHMENT
PUMP GP-GEAR
7G-6787 PUMP GP-GEAR
7G6787 GEAR PUMP GROUP-SINGLE SECTION
PART OF 7G6788 GEAR PUMP
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
Ripper Compatibility Guidelines{6311,6062,6312}
1989/08/14
Disassembly and Assembly
Bulldozer Brace
D9L TRACTOR VEHICLE SYSTEMS
Special Instruction
Installation of 9S (18Y, 52Y) and 9U (19Y) Bulldozer{6051, 6053}
Installation of 9S (18Y, 52Y) and 9U (19Y) Bulldozer{6051, 6053}
Specifications
Bulldozer Control Valve<BR> (3G3282)
D9L TRACTOR HYDRAULICS
Bulldozer Lift Cylinder<BR> (9J5868)
D9L TRACTOR HYDRAULICS
Bulldozer Tilt Cylinder<BR> (3G8661)
D9L TRACTOR HYDRAULICS
Disassembly and Assembly
Bulldozer Control Valve
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Quick Drop Valves
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Lift Cylinders
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Lift Cylinder Mounts
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer
D9L TRACTOR VEHICLE SYSTEMS
Trunnions
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Tilt Cylinder
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Brace
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer And Tilt Control Linkage
D9L Tractor Operator's Station
Service Magazine
Correct Orientation Of Mounting Groups For Bulldozer Lift Cylinders Necessary To Prevent Interference Between Tilt Cylinder Guard, Push Frame And Track{5102,6050,6051,6053,6054}
1983/09/26
Improvements Made To Bulldozer Control Valve Groups{5051,5115}
1984/02/13
New Poppet Valve Improves Operation Of Bulldozer Control Valve {5115}
1984/06/25
New Bulldozer And Cutting Edges Used{6051,6053,6800,6801,6804}
1986/01/13
Bulldozer Lift Cylinder Group Improved{5102}
1986/02/10
New Guard For Dozer Tilt Cylinder Lines{5100,5104}
1986/05/05
New Stem Used In Bulldozer Control Valve {5115}
1986/08/04
Orifices In Dozer Quick-Drop Valves Available For Parts Service{5110}
1988/04/04
New Video Tape - &quot;Dozer Blade Performance: Rolling vs. Sliding&quot;{6060}
1989/02/13
Improved Bulldozer Lift Cylinder Groups{5102,6050}
1989/09/25
Bulldozer Push Arm Connectors Use Replaceable Bearings{6060,6061}
1992/07/20
Specifications
Input Clutch
58 & 59 TOWING WINCHES
Adjustment Of Bearings For Input Clutch
58 & 59 TOWING WINCHES
Service Magazine
New Handle And Switch Group Used In Dual Tilt Implement Linkage Group Attachments{1419,6079}
1990/07/30
Improved Dual Tilt Switch{7332,5131}
1992/10/05
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Specifications
Filter Bypass Group
58 & 59 TOWING WINCHES
Disassembly and Assembly
Oil Filter Bypass Valve
58 & 59 TOWING WINCHES
Service Magazine
Improvements In Hydraulic Tank Help Prevent Damage To Filter Element {5056,5068}
1984/04/02
Seal Kit Available For 1Z9908 Hydraulic Filter Group{5068,6317}
1989/03/20
Special Instruction
Reconditioning Ripper Pin Bores{6310, 6311, 6312, 6313, 6314, 6315, 6316}
Reconditioning Ripper Pin Bores{6310, 6311, 6312, 6313, 6314, 6315, 6316}
Disassembly and Assembly
Ripper Frame
D9L TRACTOR VEHICLE SYSTEMS
Service Magazine
Socket Blocks On Multishank Rippers Are Available For Parts Service{6314}
1983/10/17
Lifting Brackets Removed From Ripper Frame Assemblies{6311,6312}
1985/10/28
Reinforcement Plates Can Be Added To Impact Ripper Beam{6314,6317}
1988/11/14
Bolt Protector Plates Are Available For Parts Service{6314,6317,6820}
1989/09/25
Reinforcement Of Impact Ripper Beam Assembly{6314,6317}
1990/05/14
New Lubricated Bronze Bearings Used In Beam Assembly, Part Of Impact Ripper Group{6317,6314,7521}
1991/02/18
Shims Prevent Loosening of Hammer Support Bolts{6317,6314}
1991/10/07
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Specifications
Oil Lines Group
58 & 59 TOWING WINCHES
Disassembly and Assembly
Ripper Control Linkage
D9L Tractor Operator's Station
Bulldozer And Tilt Control Linkage
D9L Tractor Operator's Station
Ripper Control Linkage
D9L Tractor Operator's Station
Service Magazine
New Seal And Guide Used In Implement Linkage Groups (An Attachment){5063}
1987/02/09
New Handle And Switch Group Used In Dual Tilt Implement Linkage Group Attachments{1419,6079}
1990/07/30
Improved Dual Tilt Switch{7332,5131}
1992/07/13
An Improved 169-1644 Rod End Boot Is Now Available {1265, 6082, 6313}
2001/10/29
Special Instruction
Reconditioning Ripper Pin Bores{6310, 6311, 6312, 6313, 6314, 6315, 6316}
Reconditioning Ripper Pin Bores{6310, 6311, 6312, 6313, 6314, 6315, 6316}
Installation of 59 Winch (66Y){5163}
Installation of 59 Winch (66Y){5163}
Specifications
Winch Mounting
D9L TRACTOR POWER TRAIN
Cutting Edges And End Bits
D9L TRACTOR HYDRAULICS
Control Valve For Pin Puller<BR> (3G9668)
D9L TRACTOR HYDRAULICS
Pin Puller Cylinder<BR> (1U3373)
D9L TRACTOR HYDRAULICS
Disassembly and Assembly
Bulldozer Control Valve
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Lift Cylinder Mounts
D9L TRACTOR VEHICLE SYSTEMS
Trunnions
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer And Tilt Control Linkage
D9L Tractor Operator's Station
Ripper Control Linkage
D9L Tractor Operator's Station
Service Magazine
New Shank Assemblies, Optional Ripper Tips And Shank Protectors Now Available{6808,6812}
1981/12/14
New Fitting Has Clearance For Wrench, Stops Leakage At Valve{5057,5353,5354}
1982/01/25
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Seal Used In Yoke Group{1165,1207}
1983/04/04
Double Locknuts Keep Pin Puller Bolts Tight{5354,6300}
1983/07/04
Make Sure Ripper Tips Are Installed Correctly{6808}
1985/04/22
New Fittings For Ripper Pin Puller Cylinders Have O-Ring Seals{5354}
1985/10/07
Lifting Brackets Removed From Ripper Frame Assemblies{6311,6312}
1985/10/28
Coarse Threaded Bolts Used On Frame And Case Groups{7051,7056,7105,5163,7252}
1985/12/16
Increased Lubrication For Lift Cylinder Mounting Yoke Bearings{6068,7551,1381}
1986/03/24
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Seal And Guide Used In Implement Linkage Groups (An Attachment){5063}
1987/02/09
Installation of A Magnetic Plug In The Cover Of The Power Train Suction Screen Housing{3004}
1988/03/07
Orifices In Dozer Quick-Drop Valves Available For Parts Service{5110}
1988/04/04
New Video Tape - &quot;Dozer Blade Performance: Rolling vs. Sliding&quot;{6060}
1989/02/13
Seal Kit Available For 1Z9908 Hydraulic Filter Group{5068,6317}
1989/03/20
Ripper Compatibility Guidelines{6311,6062,6312}
1989/08/14
Applications For Deep Ripper Shanks{6810,6311,6316}
1989/09/25
Conversion Kits Are Available To Change Speeds Of Winches{5163,5165}
1989/12/18
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Handle And Switch Group Used In Dual Tilt Implement Linkage Group Attachments{1419,6079}
1990/07/30
Improved Dual Tilt Switch{7332,5131}
1992/07/13
Disassembly and Assembly
Bulldozer Lift Cylinder Mounts
D9L TRACTOR VEHICLE SYSTEMS
Service Magazine
Increased Lubrication For Lift Cylinder Mounting Yoke Bearings{6068,7551,1381}
1986/03/24
Undercarriage Reconditioning Bulletin
Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513}
Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513}
Service Magazine
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Seal Used In Yoke Group{1165,1207}
1983/04/04
Specifications
Control Valve For Pin Puller<BR> (3G9668)
D9L TRACTOR HYDRAULICS
Pin Puller Cylinder<BR> (1U3373)
D9L TRACTOR HYDRAULICS
Service Magazine
New Fitting Has Clearance For Wrench, Stops Leakage At Valve{5057,5353,5354}
1982/01/25
Double Locknuts Keep Pin Puller Bolts Tight{5354,6300}
1983/07/04
New Fittings For Ripper Pin Puller Cylinders Have O-Ring Seals{5354}
1985/10/07
Bulldozer Push Arm Connectors Use Replaceable Bearings{6060,6061}
1992/07/20
New Stabilizer Ring Used To Hold Toric Ring In Position In Track Idlers And Rollers{4159,4180}
1985/02/04
Specifications
Pressure Control (Restrictor) Valve<BR> (3G7548)
D9L TRACTOR HYDRAULICS
Winch Control Valve Group
58 & 59 TOWING WINCHES
Pressure Control Valve
58 & 59 TOWING WINCHES
Selection Valve Group
58 & 59 TOWING WINCHES
Disassembly and Assembly
Pressure Control Valve (Restrictor Valve)
D9L TRACTOR VEHICLE SYSTEMS
Winch Control Valves
58 & 59 TOWING WINCHES
Service Magazine
New Cover And Spring Used In Pressure Control Valve {5129,5072}
1981/09/14
Spring Failures In Hydraulic Pressure Control Valve: New Cover And Spring Used{5051}
1982/03/29
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications
Oil Pump<BR> (7G6787)
58 & 59 TOWING WINCHES
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Truck sale:

Caterpillar D9L
 
Caterpillar D9L
- Crawler dozers
N C MACHINERY CO.
Caterpillar D9L, Construction
39,908 
Caterpillar D9L, Construction
- Dozers
MICHIGAN CAT
Caterpillar D9L, Construction
50,000 
Caterpillar D9L, Construction
- Dozers
QUINN COMPANY
CATERPILLAR D9L 1982
 
CATERPILLAR D9L 1982
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
CATERPILLAR D9L 1987
 
CATERPILLAR D9L 1987
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.