AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9J5868 CYLINDER GP-BULLDOZER LIFT-152 MM (6") BORE X 1653 MM (65") STROKE PART OF 6P8853 VALVE & CYLINDER AN ATTACHMENT D9L


HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
BULLDOZER GP

TRACK-TYPE TRACTOR D9L TRACK-TYPE TRACTOR 14Y
 D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE SEBP1305 D9L 14Y   (1980)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP
1U-3373 CYLINDER GP
MOUNTING GP-CYLINDER
9J-6006 MOUNTING GP-CYLINDER
CYLINDER GP-LIFT
9J-5868 CYLINDER GP-LIFT
CYLINDER GP
4T-4248 CYLINDER GP
CYLINDER GP
4T-4248 CYLINDER GP
CYLINDER GP-TILT
3G-8661 CYLINDER GP-TILT
 

#SEBP13050910
 

9J-5868: CYLINDER GP-LIFT

9J5868 CYLINDER GP-BULLDOZER LIFT-152 MM (6") BORE X 1653 MM (65") STROKE
PART OF 6P8853 VALVE & CYLINDER
AN ATTACHMENT
c353104 SEBP1305
9J5868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] NUT-SELF LOCKING  
2. 9J-5860 J [1] RING-WEAR  
3. 9J-5859 [1] PISTON AS  
4. 5J-2528 [3] PLUNGER  
  5J-2529 [6] INSERT  
5. 2J-1740 [2] SPACER  
6. 9J-5862 R [1] CYLINDER AS  
7. 5J-1193 [2] BEARING-SLEEVE  
8. 5H-3252 J [1] SEAL-O-RING  
9. 2K-3258 CJ [1] RING-BACK-UP  
10. 9T-1851 C [1] HEAD  
11. 1D-4627 [4] BOLT 7.62CM(3 IN.)LG.  
12. 1A-5576 [2] BOLT 11.43CM(4.5IN.)LG.  
13. 5P-8249 [6] WASHER  
14. 1D-5976 [6] BOLT  
  2J-3505 [6] NUT-FULL  
15. 9J-6252 [1] CAP-BEARING  
16. 3G-2385 [12] SHIM  
17. 8T-8389 C [1] SEAL  
18. 5J-8325 J [1] SEAL-U-CUP  
19. 8T-4813 CJ [1] RING-WEAR (WEAR)  
20. 9J-5866 R [1] ROD AS  
21. 5J-4989 [1] SEAL AS  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-4831 [1] KIT-HYD CYLINDER SEAL (SEAL)  
    (INCLUDES WIPER &
    PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13050911
 

4T-4248: CYLINDER GP

4T4248 CYLINDER GP-234.95MM BORE X 195MM STROKE
TYPE 1
PART OF 7T5128 CYLINDER AR
AN ATTACHMENT
c340161 SEBP1305
4T4248 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4249 [1] CYLINDER AS  
  3G-8580 [4] LUG  
  1U-2532 [2] BAR  
  1U-3658 [1] HANDLE  
2. 4J-8734 [1] NUT-SELF LOCKING  
3. 7J-2087 [1] RING-WEAR  
4. 5J-7019 [1] SEAL AS  
5. 4T-4255 [1] PISTON AS  
6. 5J-2529 [4] INSERT  
7. 5J-2528 [2] PLUNGER  
8. 9T-1878 [2] WASHER  
9. 4T-4256 [1] HEAD  
10. 5M-0544 [6] BOLT  
  3S-1349 [6] WASHER  
11. 8J-4627 [1] SEAL-RING  
12. 5J-8400 [1] SEAL-CUP  
13. 4T-4254 [1] ROD AS  
  5L-4756 [2] RING-RETAINING  
  1U-2729 [1] BEARING AS  
14. 7J-5673 [1] SEAL-LIP TYPE  
15. 1U-3174 [1] SEAL-O-RING  
16. 1U-3173 [1] RING-BACK-UP  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1474 [1] KIT-SEAL (SEAL-HYD. CYL.)  
    (INCL. SEALS & RINGS)
 

#SEBP13050912
 

4T-4248: CYLINDER GP

4T4248 CYLINDER GP-234.95 MM X 195 MM STROKE
TYPE 2
PART OF 7T5128 CYLINDER AR
AN ATTACHMENT
c413032 SEBP1305
4T4248 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-4249 [1] CYLINDER AS  
  3G-8580 [4] LUG  
  1U-2532 [2] BAR  
  1U-3658 [1] HANDLE  
2. 4J-8734 [1] NUT-SELF LOCKING  
3. 7J-2087 J [1] RING-WEAR  
4. 5J-7019 J [1] SEAL AS  
5. 4T-4255 [1] PISTON AS  
6. 5J-2529 [4] INSERT  
7. 5J-2528 [2] PLUNGER  
8. 9T-1878 [2] WASHER  
9. 9T-4434 C [1] HEAD  
10. 5M-0544 [6] BOLT  
  3S-1349 [6] WASHER  
11. 8J-4627 J [1] SEAL-RING  
12. 5J-8400 J [1] SEAL-CUP  
13. 4T-4254 [1] ROD AS  
  5L-4756 [2] RING-RETAINING  
  1U-2729 [1] BEARING AS  
14. 7J-5673 J [1] SEAL-LIP TYPE  
15. 1U-3174 J [1] SEAL-O-RING  
16. 1U-3173 J [1] RING-BACK-UP  
17. 8T-6747 C [1] RING-WEAR  
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1474 [1] KIT-SEAL (HYD. CYL.)  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13050913
 

3G-4893: BULLDOZER AR-CUSHION

3G4893 BULLDOZER ARRANGEMENT-CUSHION
REPLACED BY 4T9544-PAGE 246.01
9C BULLDZER S/N 20Y1-UP
SLSO PART OF 3G4894 BULLDOZER AR-PAGE 246
SEBP13050913 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  3G-4288 Y [1] BLADE GROUP-CUSHION  
   
  3G-4575 Y [1] CUSHION FRAME GROUP  
   
  5P-4020 [1] PLATE-SERIAL NUMBER  
    ON BACK OF MOLDBOARD AT R.H. END
  Y   SEPARATE ILLUSTRATION
 

#SEBP13050914
 

3G-4894: BULLDOZER AR-CUSHION

3G4894 BULLDOZER ARRANGEMENT-CUSHION-REPLACED BY 4T9545
REPLACED BY 4T9545-PAGE 246.01
FOR USE WITH 9 P6465, 9P6466 OR9P6467 HYDRULICCONTROL ARS
LISTED ON PAGE 191 & 192, AN ATTACHMENT
SEBP13050914 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  3G-4893 Y [1] BULLDOZER ARRANGEMENT  
   
  3G-6371 Y [1] TRUNNION AND CRANKCASE GUARD GROUP  
   
  9J-6006 Y [1] CYLINDER MOUNTING GROUP  
   
  6P-8853 Y [2] VALVE AND CYLINDER GROUP  
   
  3T-8243 Y [1] LIFT CYLINDER LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13050915
 

4T-9544: BULLDOZER AR-CUSHION

4T9544 CUSHION BULLDOZER ARRANGEMENT
9C BULLDOZER S/N 20Y1-UP
AN ATTACHMENT
SEBP13050915 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
   
   
   
  4T-9543 Y [1] CUSHION BLADE GROUP  
   
   
  3G-4575 Y [1] C-FRAME GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13050916
 

4T-9545: BULLDOZER AR-CUSHION

4T9545 BULLDOZER AR
9C BULLDOZER S/N 20Y1-UP
AN ATTACHMENT
SEBP13050916 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
  4T-9543 Y [1] BLADE GP-CUSHION  
   
  3G-6371 Y [1] CRANKCASE GUARD GP-TRUNNION  
   
  3G-4575 Y [1] FRAME GP-CUSHION  
   
  3T-8243 Y [1] LIFT CYLINDER LINES GROUP  
   
  9J-6006 Y [1] MOUNTING GP-CYLINDER  
   
  6P-8853 Y [2] VALVE CYLINDER GP  
   
  8T-7371 [1] PLATE-SERIAL NO.  
  4B-4158 [1] DRIVE SCREW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13050917
 

3G-3229: BULLDOZER AR-STRAIGHT

3G3229 BULLDOZER ARRANGEMENT-STRAIGHT
9S BULLDOZER SERIAL NO. 18Y1-UP AND 52Y1-UP
ALSO PART OF 3G3230 BULLDOZER ARRANGEMENT LISTED ON PAGE 247
SEBP13050917 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9J-6073 Y [1] TRUNNION GROUP  
   
  9J-6674 Y [1] PUSH ARM GROUP  
   
  9J-6951 Y [1] BLADE GROUP-STRAIGHT  
   
  9J-7595 Y [1] TILT CYLINDER LINES GROUP  
   
  5P-4020 [1] PLATE-SERIAL NUMBER  
    UNDER R.H. CYLINDER DEFLECTOR
   
  4B-5158 [2] DRIVE SCREW  
    SERIAL NO. 18Y1-UP
   
    -OR-
   
  [1] PLATE-SERIAL NUMBER  
    UNDER R.H. CYLINDER DEFLECTOR
   
  4B-4159 [2] DRIVE SCREW  
    SERIAL NO. 52Y1-UP
  Y   SEPARATE ILLUSTRATION
 

#SEBP13050918
 

3G-3230: BULLDOZER AR-STRAIGHT

3G3230 BULLDOZER ARRANGEMENT-STRAIGHT-TYPE 1
FOR USE WITH 6P4400, 9P1704 OR 9P6468 HYDRAULIC CONTROL
ARRANGEMENTS LISTED ON PAGES 190 AND 191. AN ATTACHMENT
SEBP13050918 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  3G-3229 Y [1] BULLDOZER ARRANGEMENT  
   
  9J-6006 Y [1] CYLINDER MOUNTING GROUP  
   
  6P-8853 Y [2] VALVE AND CYLINDER GROUP  
   
  3T-8243 Y [1] LIFT CYLINDER LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13050919
 

3G-3230: BULLDOZER AR-STRAIGHT

3G3230 BULLDOZER AR-STRAIGHT-TYPE 2
FOR USE WITH 9P1704, 9P6468 OR 6P4400 HYDRAULIC CONTROL
ARRANGEMENT LISTED ON PAGES 190 & 191
AN ATTACHMENT
SEBP13050919 SEBP1305
  For full view, you need register

Parts for your D9L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  9J-6006 Y [1] MOUNTING GP-CYLINDER  
  6P-8853 Y [2] VALVE & CYLINDER GP  
  3T-8243 Y [1] LINES GP-LIFT CYLINDER  
  9J-6951 Y [1] BLADE GP-STRAIGHT  
  9J-6674 Y [1] ARM GP-PUSH STABILIZER  
  9J-6073 Y [1] TRUNNION GP-BULLDOZER  
  9J-7595 Y [1] LINES GP-TILT CYLINDER  
  4B-5158 [2] DRIVE SCREW  
  5P-4020 [1] PLATE-SERIAL NUMBER  
    UNDER R.H CYLINDER DEFLECTOR
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bulldozer Lift Cylinder<BR> (9J5868)
D9L TRACTOR HYDRAULICS
Bulldozer Tilt Cylinder<BR> (3G8661)
D9L TRACTOR HYDRAULICS
Ripper Lift Cylinders<BR> (9J6557 &amp; 9J6558)
D9L TRACTOR HYDRAULICS
Ripper Tip Cylinder<BR> (3G3469)
D9L TRACTOR HYDRAULICS
Pin Puller Cylinder<BR> (1U3373)
D9L TRACTOR HYDRAULICS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Ripper Tilt Cylinders
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Lift Cylinders
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Lift Cylinder Mounts
D9L TRACTOR VEHICLE SYSTEMS
Bulldozer Tilt Cylinder
D9L TRACTOR VEHICLE SYSTEMS
Service Magazine
6V3036 Seal Guide Available For Installation Of Wiper Seals On Hydraulic Cylinder Rods{0622,5102,5104}
1981/06/15
New Fitting Has Clearance For Wrench, Stops Leakage At Valve{5057,5353,5354}
1982/01/25
Improved Back-Up Ring For Seal In Hydraulic Cylinder Head{5102,5104}
1982/07/12
Correct Orientation Of Mounting Groups For Bulldozer Lift Cylinders Necessary To Prevent Interference Between Tilt Cylinder Guard, Push Frame And Track{5102,6050,6051,6053,6054}
1983/09/26
New Ripper Tilt Cylinder Groups Need No Spacer Or Nut{5106,5102}
1985/05/20
New Fittings For Ripper Pin Puller Cylinders Have O-Ring Seals{5354}
1985/10/07
Bulldozer Lift Cylinder Group Improved{5102}
1986/02/10
Increased Lubrication For Lift Cylinder Mounting Yoke Bearings{6068,7551,1381}
1986/03/24
New Guard For Dozer Tilt Cylinder Lines{5100,5104}
1986/05/05
Longer Bolts Fasten Lift Cylinders To Heads {5352}
1989/05/29
Improved Bulldozer Lift Cylinder Groups{5102,6050}
1989/09/25
Ripper Lift Cylinder Head Improved To Retain Wiper Seal{5352}
1996/04/29
New Piston Retaining Washer For Ripper Lift And Tilt Cylinder Groups {5352,5356,7526}
1996/08/12
Torque Decreased On Piston Retaining Nut In Ripper Tilt Cylinder Group{5356,7526}
1997/10/27
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D9L :

VALVE GP-QUICK-DROP
4T-4205 VALVE GP-QUICK-DROP
VALVE GP-QUICK-DROP
1U-4682 VALVE GP-QUICK-DROP
VALVE GP-QUICK-DROP
3G-3278 VALVE GP-QUICK-DROP
VALVE & CYLINDER GP
6P-8853 VALVE & CYLINDER GP
VALVE & CYLINDER GP
6P-8853 VALVE & CYLINDER GP
VALVE & CYLINDER GP
6P-8853 VALVE & CYLINDER GP
VALVE & CYLINDER GP
6P-8853 VALVE & CYLINDER GP
MOUNTING GP-CYLINDER
9J-6006 MOUNTING GP-CYLINDER
CYLINDER GP
4T-4248 CYLINDER GP
CYLINDER GP
4T-4248 CYLINDER GP
3G-4893 BULLDOZER AR-CUSHION
3G-4894 BULLDOZER AR-CUSHION
4T-9544 BULLDOZER AR-CUSHION
4T-9545 BULLDOZER AR-CUSHION
3G-3229 BULLDOZER AR-STRAIGHT
3G-3230 BULLDOZER AR-STRAIGHT

Truck sale:

Caterpillar D9L
 
Caterpillar D9L
- Crawler dozers
N C MACHINERY CO.
Caterpillar D9L, Construction
39,908 
Caterpillar D9L, Construction
- Dozers
MICHIGAN CAT
Caterpillar D9L, Construction
50,000 
Caterpillar D9L, Construction
- Dozers
QUINN COMPANY
CATERPILLAR D9L 1982
 
CATERPILLAR D9L 1982
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
CATERPILLAR D9L 1987
 
CATERPILLAR D9L 1987
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.