AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-2296 CYLINDER HEAD AS S/N 90N67318-UP PART OF 7C-3807 CYLINDER HEAD AS, 1W-4241 CYLINDER HEAD GP FIELD REPLACEMENT ORDER @@@@@ 7C-3807@@@@@ 3208


BASIC ENGINE
CYLINDER HEAD GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 Industrial Engine Naturally Aspirated 90N52893-UP SEBP1306 3208 90N   (2018)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
7C-2295 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-2296 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-3807 CYLINDER HEAD AS
CYLINDER HEAD GP
1W-4241 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-4241 CYLINDER HEAD GP
 

#SEBP13060080
 

7C-2296: CYLINDER HEAD AS

7C-2296 CYLINDER HEAD AS
S/N 90N67318-UP
PART OF 7C-3807 CYLINDER HEAD AS, 1W-4241 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7C-3807@@@@@
i00196555 SEBP1306
7C2296 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] HEAD  
2. 8M-5860 [4] PLUG-CUP  
3. 9N-2837 [4] INSERT-VALVE SEAT (EXHAUST)  
4. 2N-8943 [4] INSERT-VALVE SEAT (INLET)  
  Z   NOT SERVICED SEPARATELY
 

#SEBP13060081
 

7C-3807: CYLINDER HEAD AS

7C-3807 CYLINDER HEAD AS
S/N 90N67318-UP
FIELD REPLACEMENT FOR @@@@@ 7C-2295@@@@@, @@@@@ 7C-2296@@@@@
i00406000 SEBP1306
7C3807 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2296 Y [1] CYLINDER HEAD AS  
2. 9L-7657 [1] PLUG-CUP  
3. 5M-6213 [2] PLUG-PIPE  
4. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
5. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 2B-0858 [1] PLUG-PIPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060082
 

1W-4241: CYLINDER HEAD GP

1W-4241 CYLINDER HEAD GP
S/N 90N56424-64621
PART OF 9N-1105 CYLINDER HEAD GP
i00356740 SEBP1306
1W4241 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 9N-5565 [8] WASHER  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 9N-5819 [1] CYLINDER HEAD AS  
7. 9N-2837 [4] INSERT-VALVE SEAT (EXHAUST)  
  2N-8943 [4] INSERT-VALVE SEAT (INLET)  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 B [1] PLUG-CUP  
10. 2B-0858 B [1] PLUG-PIPE  
11. 0L-1329 B [3] BOLT (1/2-13X3-IN)  
12. 5M-6213 B [1] PLUG-PIPE  
  2N-1287 BF [1] ELBOW-FLARED  
  1N-3799 BF [1] TUBE AS (VENT LINE)  
  7K-9197 BF [1] ELBOW  
  001-9440 BF [1] CONNECTOR  
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP13060083
 

1W-4241: CYLINDER HEAD GP

1W-4241 CYLINDER HEAD GP
S/N 90N64622-67317
PART OF 9N-1105 CYLINDER HEAD GP
i00356742 SEBP1306
1W4241 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 1W-9897 C [8] WASHER-SPRING  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 4W-4031 C [1] CYLINDER HEAD AS  
7. 9N-2837 [4] INSERT-VALVE SEAT (EXHAUST)  
  2N-8943 [4] INSERT-VALVE SEAT (INLET)  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 [1] PLUG-CUP  
10. 2B-0858 [1] PLUG-PIPE  
11. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
12. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 5M-6213 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13060084
 

1W-4241: CYLINDER HEAD GP

1W-4241 CYLINDER HEAD GP
S/N 90N67318-UP
PART OF 9N-1105 CYLINDER HEAD GP
Type 1
i00356744 SEBP1306
1W4241 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 1W-9897 [8] WASHER-SPRING  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 7C-2295 CY [1] CYLINDER HEAD AS  
7. 7W-9143 C [4] SEAL-VALVE GUIDE (INTAKE ONLY)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060085
 

1W-4241: CYLINDER HEAD GP

1W-4241 CYLINDER HEAD GP
S/N 90N67318-UP
PART OF 9N-1105 CYLINDER HEAD GP
Type 2
i00356746 SEBP1306
1W4241 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 1W-9897 [8] WASHER-SPRING  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 7C-2296 CY [1] CYLINDER HEAD AS  
7. 7W-9143 C [4] SEAL-VALVE GUIDE (INTAKE ONLY)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060086
 

1W-6221: CYLINDER HEAD GP

1W-6221 CYLINDER HEAD GP
S/N 90N54555-54555; 90N54557-56423
PART OF 9N-1105 CYLINDER HEAD GP
i00352754 SEBP1306
1W6221 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 9N-5565 [8] WASHER  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 9N-5819 [1] CYLINDER HEAD AS  
7. 9N-2837 [4] INSERT-VALVE SEAT (EXHAUST)  
  2N-8943 [4] INSERT-VALVE SEAT (INLET)  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 [1] PLUG-CUP  
10. 5M-6214 [1] PLUG-PIPE  
11. 0L-1329 [3] BOLT (1/2-13X3-IN)  
12. 5M-6213 [1] PLUG-PIPE  
 

#SEBP13060087
 

9N-1105: CYLINDER HEAD GP

9N-1105 CYLINDER HEAD GP
S/N 90N52893-54554; 90N54556-54556
i00436182 SEBP1306
9N1105 CYLINDER HEAD GP Parts scheme 9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG-PIPE  
2. 5M-6213 [3] PLUG-PIPE  
3. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3.0-MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
9. 9N-3111 [2] CYLINDER HEAD AS  
    (EACH INCLUDES)
  9L-7657 [1] PLUG-CUP  
10. 9N-2837 [4] INSERT-VALVE SEAT (EXHAUST)  
11. 0L-1329 [3] BOLT (1/2-13X3-IN)(LOCATION H)  
12. 8M-5860 [4] PLUG-CUP  
13. 5M-6214 [1] PLUG-PIPE  
14. 5M-6213 [1] PLUG-PIPE  
15. 0S-1571 [1] BOLT (3/8-16X1.75-IN)(LOCATION C-LEFT HEAD)  
  9L-9166 [1] STUD (3/8-16X3.63-IN)((RIGHT HEAD)  
16. 9L-8889 [16] WASHER  
17. 9N-3387 [16] SPRING-VALVE OUTER  
18. 9L-9425 [16] RETAINER-SPRING  
19. 2A-4429 [32] LOCK-RETAINER  
20. 9L-9164 [2] GASKET-CYLINDER HEAD  
21. 9L-7683 [8] VALVE-EXHAUST  
22. 9L-7682 [8] VALVE-INLET  
  2N-8943 A [8] INSERT-VALVE SEAT (INLET)  
23. 9N-0906 [16] SPACER  
  A   NOT PART OF THIS GROUP
 

#SEBP13060088
 

9N-1105: CYLINDER HEAD GP

9N-1105 CYLINDER HEAD GP
S/N 90N54555-54555; 90N54557-56423
i00436190 SEBP1306
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6221 CY [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
4. 9L-9164 [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)(LEFT HEAD)  
6. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
8. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
9. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
10. 5M-6213 [4] PLUG-PIPE  
11. 3H-7654 [36] WASHER-HARD (13.5X22.5X3.0-MM THK)  
12. 7H-3171 [1] PLUG-PIPE (LEFT HEAD)  
13. 5M-6213 [1] PLUG-PIPE (RIGHT HEAD)  
14. 5M-6214 [2] PLUG-PIPE  
15. 9L-9166 [1] STUD (3/8-16X3.63-IN)(RIGHT HEAD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060089
 

9N-1105: CYLINDER HEAD GP

9N-1105 CYLINDER HEAD GP
S/N 90N56424-60897
i00436198 SEBP1306
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4241 CY [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
4. 9L-9164 [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)(LEFT HEAD)  
6. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
8. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
9. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
10. 5M-6213 [4] PLUG-PIPE  
11. 3H-7654 [36] WASHER-HARD (13.5X22.5X3.0-MM THK)  
12. 7H-3171 [1] PLUG-PIPE (LEFT HEAD)  
  5M-6213 [1] PLUG-PIPE (RIGHT HEAD)  
13. 2B-0858 [2] PLUG-PIPE  
14. 9L-9166 [1] STUD (3/8-16X3.63-IN)(RIGHT HEAD)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
Larger Valve Springs
1981/05/20
New Spacers Used With Larger Valve Springs
1981/08/26
Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts
1982/05/12
New Rocker Arm Assemblies Used
1982/09/22
Resurfaced Cylinder Blocks And Heads
1982/11/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Spring Seat Enlarger Available For Use On Cylinder Heads
1983/01/19
Improved Cylinder Head Gasket
1983/02/16
Engine Valve Stem "Use Again" Specifications
1983/03/16
Improved Valve Springs Available
1983/04/27
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/10/26
Correct Installation Of New Valve Springs
1983/11/30
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/01/18
Remanufactured Cylinder Head Assemblies
1984/02/22
Improved Cylinder Head Gasket
1984/06/20
New Relief Valve Guide Used In Oil Pump
1984/07/11
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines
1985/08/01
Head Gasket Replacement Procedure
1985/08/01
Improved Cylinder Head Gasket
1986/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Plastic Water Sleeve Used
1987/06/01
Check Plastic Water Sleeve If Engine Experiences Severe Overheating
1987/11/01
Intake Valve Seals Used
1987/12/01
New Head Gasket Used
1989/05/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Engine Valve Springs Are Now Made Of Stronger Steel
1977/09/07
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Special Instruction
Installation of Head Gasket (With New Torque Procedure){1100}
Installation of Head Gasket (With New Torque Procedure){1100}
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V7028 Spring Seat Enlarger For 3200 Cylinder Heads{1101}
Use Of 6V7028 Spring Seat Enlarger For 3200 Cylinder Heads{1101}
Installation Of 1W4259 Valve Spring{1108}
Installation Of 1W4259 Valve Spring{1108}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves<BR> (Engines With Serial Numbers 90N1-90N6120, 75V1-75V1446)
3208 INDUSTRIAL & MARINE ENGINES
Valve Seats And Inserts
3208 INDUSTRIAL & MARINE ENGINES
Valves<BR> (Engines With Serial Numbers 90N6121-Up, 75V1447-Up)
3208 INDUSTRIAL & MARINE ENGINES
Valve Seats And Inserts
3208 INDUSTRIAL & MARINE ENGINES
Cylinder Head
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Covers
3208 INDUSTRIAL & MARINE ENGINES
Cylinder Head Assemblies
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Larger Valve Springs{1108,1101,1252}
1981/05/04
New Spacers Used With Larger Valve Springs{1108,1101}
1981/08/10
Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts{1315,1304}
1982/04/26
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Spring Seat Enlarger Available For Use On Cylinder Heads{0663}
1983/01/10
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Improved Valve Springs Available{1108}
1983/04/04
Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/04/25
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Correct Installation Of New Valve Springs{1108}
1983/11/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Remanufactured Cylinder Head Assemblies{1100,1101}
1984/02/13
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Engine Valve Springs Are Now Made Of Stronger Steel{1108}
1977/08/29
New Plastic Water Sleeve Used{1380}
1987/05/18
Intake Valve Seals Used{1105,1300}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Used {1124}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1994/01/10
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Caterpillar Parts SIS Catalog 3208 :

CYLINDER HEAD AS
7C-2295 CYLINDER HEAD AS
9N-5669 CYLINDER BLOCK GP
9N-3763 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-3761 CYLINDER BLOCK GP
CRANKSHAFT GP
9N-6222 CRANKSHAFT GP
9N-8009 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9N-0730 COVER GP-VALVE MECHANISM
CYLINDER HEAD AS
7C-3807 CYLINDER HEAD AS
CYLINDER HEAD GP
1W-4241 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-4241 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-4241 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-4241 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-6221 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.