AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N-0487 VALVE MECHANISM GP 3208 ENGINE - MACHINE


BASIC ENGINE
VALVE MECHANISM GP
LUBRICATION SYSTEM
BREATHER GP
COOLING SYSTEM
COOLER GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
GAUGE GP-OIL LEVEL (DIPSTICK)

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 Industrial Engine Naturally Aspirated 90N52893-UP SEBP1306 3208 90N   (2018)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
9N-0730 COVER GP-VALVE MECHANISM
9N-8009 COVER GP-VALVE MECHANISM
VALVE MECHANISM GP
9N-0487 VALVE MECHANISM GP
 

#SEBP13060200
 

9N-0487: VALVE MECHANISM GP

9N-0487 VALVE MECHANISM GP
i00435747 SEBP1306
9N0487 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5786 C [16] LIFTER-VALVE  
2. 9N-6500 [16] PUSHROD-VALVE  
3. 1D-4540 [8] BOLT (5/16-18X2.75-IN)  
4. 5S-5917 C [16] SCREW  
5. 3S-2713 [16] NUT-FULL (3/8-24-THD)  
6. 2W-8271 C [16] ROCKER ARM AS  
7. 2W-6047 C [16] WASHER (22.05X31.75X0.89-MM THK)  
8. 2B-2694 [4] BOLT (5/16-18X2-IN)  
9. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
10. 9L-8076 [4] WASHER  
11. 1W-5718 C [2] BRACKET-SHAFT  
12. 9L-9315 [2] SHAFT AS-ARM  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP13060201
 

5N-1605: ADAPTER GP-BREATHER

5N-1605 ADAPTER GP-BREATHER
AN ATTACHMENT
i00523662 SEBP1306
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9L-8733 [1] ADAPTER  
 

#SEBP13060202
 

108-3882: BASE GP-OIL COOLER & FILTER

108-3882 BASE GP-OIL COOLER & FILTER
S/N 90N74879-UP
PART OF 1W-2230, 1W-7526 COOLER GP-ENGINE OIL
i00482421 SEBP1306
1083882 BASE GP-OIL COOLER & FILTER Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-1493 [2] VALVE AS-BYPASS  
2. 9L-9385 [1] FITTING-BASE  
3. 9L-9188 [2] SPRING-VALVE  
4. 8T-6765 [2] PLUG-PIPE  
5. 9L-9389 [1] CAP  
6. 9N-5557 [1] PLUG  
7. 2M-9780 [1] SEAL-O-RING  
8. 206-1253 [1] BASE AS-OIL FILTER  
  109-7280 [2] STUD-HOLLOW  
 

#SEBP13060203
 

1W-2638: FILTER GP-ENGINE OIL

1W-2638 FILTER GP-ENGINE OIL
i00356043 SEBP1306
1W2638 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0713 C [2] FILTER AS-ENGINE OIL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13060204
 

4N-6803: GAUGE GP-OIL LEVEL (DIPSTICK)

4N-6803 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 90N63620-64827
i00370832 SEBP1306
4N6803 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-8997 [1] NUT-FITTING (9/16-20-THD)  
2. 6N-0373 [1] TUBE-GAUGE GUIDE  
3. 7B-1597 [1] CLIP  
4. 4N-4542 C [1] GAUGE-OIL LEVEL (DIPSTICK) (ENGINE)  
5. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
  6V-8801 [1] NUT (3/8-16-THD)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6P-5044 C [1] PLATE  
7. 1S-2563 J [3] PLUG  
8. 2B-7556 [2] CORK  
  C   CHANGE FROM PREVIOUS TYPE
  J   USE TO PLUG OPTIONAL DIPSTICK LOCATIONS
 

#SEBP13060205
 

4N-7720: GAUGE GP-OIL LEVEL (DIPSTICK)

4N-7720 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 90N52893-55557
i00370960 SEBP1306
4N7720 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8023 C [1] GAUGE-OIL LEVEL (DIPSTICK)  
2. 8F-8997 [2] NUT-FITTING (9/16-20-THD)  
3. 9L-9056 [1] GUIDE AS-GAUGE  
4. 9L-8942 [1] GUIDE AS-GAUGE  
5. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 1S-2563 [1] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13060206
 

4N-8855: GAUGE GP-OIL LEVEL (DIPSTICK)

4N-8855 GAUGE GP-OIL LEVEL (DIPSTICK)
i00371089 SEBP1306
4N8855 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2563 [3] PLUG  
2. 8N-8018 C [1] GAUGE-OIL LEVEL (DIPSTICK)  
3. 2N-2994 [1] GUIDE-OIL LEVEL GAUGE  
4. 8F-8997 [1] NUT-FITTING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13060207
 

4N-8930: GAUGE GP-OIL LEVEL (DIPSTICK)

4N-8930 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 90N52893-69292
FRONT SUMP
i00371099 SEBP1306
4N8930 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8026 C [1] GAUGE-OIL LEVEL (DIPSTICK)  
2. 0T-0319 J [1] BOLT (7/16-14X2IN)  
  4S-9191 J [1] WASHER (5MM THK)  
  6H-7062 J [1] SPACER  
3. 8F-8997 [2] NUT-FITTING  
4. 4N-8958 [1] TUBE AS-GUIDE  
5. 1S-2563 [1] PLUG  
6. 9L-9056 [1] GUIDE AS-GAUGE  
  C   CHANGE FROM PREVIOUS TYPE
  J   USE WITHOUT ALT MOUNTING
 

#SEBP13060208
 

4W-9338: GAUGE GP-OIL LEVEL (DIPSTICK)

4W-9338 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 90N64828-UP
FRONT SUMP
i00380676 SEBP1306
4W9338 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-8997 [2] NUT-FITTING  
2. 9L-9056 [1] GUIDE AS-GAUGE  
3. 4W-4422 [1] GAUGE-OIL LEVEL (DIPSTICK)  
4. 0L-1351 [1] BOLT (3/8-16X.875 IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5MM THK)  
5. 4W-9337 [1] GUIDE AS  
  1S-2563 F [1] PLUG (MOUNTED ON RIGHT SIDE OF BLOCK)  
  F   NOT SHOWN
 

#SEBP13060209
 

5N-5166: GAUGE GP-OIL LEVEL (DIPSTICK)

5N-5166 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 90N52893-69292
i00385396 SEBP1306
5N5166 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-6425 [1] CLIP (9.52MM ID)  
2. 8F-8997 [2] NUT-FITTING  
3. 9L-9056 [1] GUIDE AS-GAUGE  
4. 1S-2563 [1] PLUG  
5. 8N-8020 C [1] GAUGE-OIL LEVEL (DIPSTICK)  
6. 5N-5165 [1] GUIDE-OIL LEVEL GAUGE  
7. 0L-1351 [1] BOLT (3/8-16X.875IN)  
8. 1D-4717 [2] NUT (3/8-16 THD)  
  5M-2894 [3] WASHER (2.5MM THK)  
9. 9L-6331 [1] BRACKET  
10. 9L-9115 [1] STUDBOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
New, One-Piece Valve Lifter Used
1981/01/28
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear
1981/03/04
Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/08/25
New Rocker Arm Assemblies Used
1982/09/22
Resurfaced Cylinder Blocks And Heads
1982/11/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Improved Cylinder Head Gasket
1983/02/16
Engine Valve Stem "Use Again" Specifications
1983/03/16
Improved Valve Springs Available
1983/04/27
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/10/26
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/11/30
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/01/18
Remanufactured Cylinder Head Assemblies
1984/02/22
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines
1985/08/01
Head Gasket Replacement Procedure
1985/08/01
Improved Cylinder Head Gasket
1986/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Plastic Water Sleeve Used
1987/06/01
Check Plastic Water Sleeve If Engine Experiences Severe Overheating
1987/11/01
Intake Valve Seals Used
1987/12/01
New Head Gasket Used
1989/05/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Engine Valve Springs Are Now Made Of Stronger Steel
1977/09/07
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Installation of Head Gasket (With New Torque Procedure){1100}
Installation of Head Gasket (With New Torque Procedure){1100}
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Specifications
Valve Covers
3208 INDUSTRIAL & MARINE ENGINES
Valve Rocker Arms And Lifters
3208 INDUSTRIAL & MARINE ENGINES
Valves<BR> (Engines With Serial Numbers 90N1-90N6120, 75V1-75V1446)
3208 INDUSTRIAL & MARINE ENGINES
Valves<BR> (Engines With Serial Numbers 90N6121-Up, 75V1447-Up)
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Covers
3208 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies &amp; Push Rods
3208 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3208 INDUSTRIAL & MARINE ENGINES
Valve Lifters
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
New, One-Piece Valve Lifter Used{1209}
1981/02/02
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up{1210,1209}
1981/09/21
Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05
New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/23
New Rocker Arm Assemblies Used {1102}
1982/09/13
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Correct Installation Of New Valve Springs{1108}
1983/11/21
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Remanufactured Cylinder Head Assemblies{1100,1101}
1984/02/13
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Engine Valve Springs Are Now Made Of Stronger Steel{1108}
1977/08/29
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters){1209,1210}
1989/12/11
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08

Caterpillar Parts SIS Catalog 3208 :

9S-6760 V-BELT SET
6L-8161 V-BELT SET
5N-1810 V-BELT SET
2P-4230 V-BELT GP
SUPPORT GP-ENGINE
9N-5224 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
4W-9541 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
1N-9939 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
1N-3438 SUPPORT GP-ENGINE
5N-1605 ADAPTER GP-BREATHER
BASE GP-OIL COOLER & FILTER
108-3882 BASE GP-OIL COOLER & FILTER
FILTER GP-ENGINE OIL
1W-2638 FILTER GP-ENGINE OIL
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-6803 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-7720 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-8855 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-8930 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
4W-9338 GAUGE GP-OIL LEVEL (DIPSTICK)

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.