AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-5605 PUMP GP-GOV & FUEL INJ S/N 90N65055-69270 PART OF 4W-5604 PUMP GP-GOV & FUEL INJ 3208 ENGINE - MACHINE


FUEL SYSTEM
GOVERNOR GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 Industrial Engine Naturally Aspirated 90N52893-UP SEBP1306 3208 90N   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
4W-5603 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5604 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5605 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5606 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5607 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5608 PUMP GP-GOV & FUEL INJ
 

#SEBP13060390
 

4W-5605: PUMP GP-GOV & FUEL INJ

4W-5605 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
PART OF 4W-5604 PUMP GP-GOV & FUEL INJ
i00379704 SEBP1306
4W5605 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6119 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
7. 4W-5642 Y [1] PUMP GP-GOV & FUEL INJ  
8. 4N-1591 [1] COVER AS-SPRING HOUSING  
  6N-0411 [1] COVER-TORQUE SPRING  
9. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
10. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
11. 4N-0508 [1] GASKET-COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060391
 

4W-5606: PUMP GP-GOV & FUEL INJ

4W-5606 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
FIELD REPLACEMENT FOR @@@@@ 4W-5636@@@@@, @@@@@ 9N-0683@@@@@
i00379705 SEBP1306
4W5606 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0509 Y [1] TORQUE CONTROL GP  
2. 4N-0443 [1] PIN-LOAD STOP  
3. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
4. 4W-5607 Y [1] PUMP GP-GOV & FUEL INJ  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060392
 

4W-5607: PUMP GP-GOV & FUEL INJ

4W-5607 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
PART OF 4W-5606, 4W-5608, 4W-5616 PUMP GP-GOV & FUEL INJ
i00379707 SEBP1306
4W5607 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6508 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
7. 4W-5641 Y [1] PUMP GP-GOV & FUEL INJ  
8. 4N-1591 [1] COVER AS-SPRING HOUSING  
  6N-0411 [1] COVER-TORQUE SPRING  
9. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
10. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
11. 4N-0508 [1] GASKET-COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060393
 

4W-5608: PUMP GP-GOV & FUEL INJ

4W-5608 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
FIELD REPLACEMENT ORDER @@@@@ 4W-5636@@@@@, @@@@@ 4N-9314@@@@@
i00379709 SEBP1306
4W5608 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9314 Y [1] SOLENOID GP-SHUTOFF  
2. 4W-5607 Y [1] PUMP GP-GOV & FUEL INJ  
3. 6N-0509 Y [1] TORQUE CONTROL GP  
4. 4N-0443 [1] PIN-LOAD STOP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060394
 

4W-5609: PUMP GP-GOV & FUEL INJ

4W-5609 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
FIELD REPLACEMENT ORDER @@@@@ 4W-5636@@@@@, @@@@@ 4N-9314@@@@@
i00379710 SEBP1306
4W5609 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0683 CY [1] SHUTOFF GP-ELECTRICAL  
2. 4W-5610 Y [1] PUMP GP-GOV & FUEL INJ  
3. 6N-0509 Y [1] TORQUE CONTROL GP  
4. 4N-0443 [1] PIN-LOAD STOP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060395
 

4W-5610: PUMP GP-GOV & FUEL INJ

4W-5610 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
PART OF 4W-5609 PUMP GP-GOV & FUEL INJ
i00379711 SEBP1306
4W5610 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6119 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
7. 4W-5641 Y [1] PUMP GP-GOV & FUEL INJ  
8. 4N-1591 [1] COVER AS-SPRING HOUSING  
  6N-0411 [1] COVER-TORQUE SPRING  
9. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
10. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
11. 4N-0508 [1] GASKET-COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060396
 

4W-5616: PUMP GP-GOV & FUEL INJ

4W-5616 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
FIELD REPLACEMENT ORDER @@@@@ 4W-5636@@@@@, @@@@@ 9N-0683@@@@@
i00379719 SEBP1306
4W5616 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
2. 6N-0539 Y [1] TORQUE CONTROL GP  
3. 4N-0443 [1] PIN-LOAD STOP  
4. 4W-5607 Y [1] PUMP GP-GOV & FUEL INJ  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060397
 

4W-5636: PUMP GP-GOV & FUEL INJ

4W-5636 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69421
i00379737 SEBP1306
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9L-7630 [2] GASKET  
  4W-5637 Y [1] PUMP GP-GOV & FUEL INJ  
  8M-8157 [1] SEAL-O-RING  
  9M-9729 [1] SEAL-O-RING  
  8M-5661 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060398
 

4W-5637: PUMP GP-GOV & FUEL INJ

4W-5637 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
PART OF 4W-5636 PUMP GP-GOV & FUEL INJ
i00379739 SEBP1306
4W5637 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5641 Y [1] PUMP GP-GOV & FUEL INJ  
2. 2M-5471 [2] BOLT  
3. 4N-8507 [1] COVER  
4. 6N-0509 Y [1] TORQUE CONTROL GP  
5. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
6. 2W-1706 [1] GASKET-SOLENOID  
7. 4N-1591 [1] COVER AS-SPRING HOUSING  
  6N-0411 [1] COVER-TORQUE SPRING  
  2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
8. 4B-2042 [1] NUT (8-32-THD)  
9. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
10. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
11. 6N-0412 [1] SCREW AS-MACHINE  
12. 3B-4501 [1] LOCKWASHER  
13. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
14. 4N-0508 [1] GASKET-COVER  
15. 4N-0443 [1] PIN-LOAD STOP  
16. 9L-6508 [1] SPRING (OUTER)  
17. 4N-5663 [1] SPRING (INNER)(INNER)  
18. 4N-0527 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060399
 

4W-5641: PUMP GP-GOV & FUEL INJ

4W-5641 PUMP GP-GOV & FUEL INJ
S/N 90N65055-69270
PART OF 4W-5607, 4W-5610, 4W-5637, 7W-1490 PUMP GP-GOV & FUEL INJ
i00379744 SEBP1306
4W5641 PUMP GP-GOV & FUEL INJ Parts scheme 4W5641 PUMP GP-GOV & FUEL INJ Parts scheme 4W5641 PUMP GP-GOV & FUEL INJ Parts scheme 4W5641 PUMP GP-GOV & FUEL INJ Parts scheme 4W5641 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7527 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
2. 9N-5862 [1] SPRING-LIFTER  
3. 4N-2728 [1] WASHER-RETAINING  
4. 7W-8120 C [8] BUSHING-TERMINAL  
5. 6N-1716 [1] VALVE AS  
6. 3J-7354 [1] SEAL-O-RING  
7. 4N-2685 [8] ROLLER-LIFTER  
8. 6N-6794 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 7N-1359 [1] FLANGE  
11. 2M-5471 [2] BOLT  
12. 4N-3088 [1] GASKET-INLET  
13. 7N-1364 [1] FLANGE AS-CHECK VALVE  
14. 1P-2298 [1] VALVE AS  
15. 4N-0975 [1] GASKET-CHECK VALVE  
16. 4N-2773 [1] SHAFT AS-CONTROL  
17. 1D-4716 [1] NUT-FULL (5/16-18-THD)  
18. 4N-2708 [1] SETSCREW  
19. 4N-0528 [1] SHAFT-LEVER  
20. 4N-9828 [1] SHAFT AS-CONTROL  
21. 4N-3922 [1] LEVER AS  
22. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
23. 4N-1763 [8] LEVER-CONTROL  
24. 4N-0563 [1] LEVER-SHAFT  
25. 9L-6807 [1] SHAFT-CONTROL  
26. 4N-1809 [1] LEVER AS-SEAT  
27. 031-0214 [2] BOLT-LOCKING (1/4-20X0.5-IN)  
28. 9M-1311 [1] NUT-JAM (1/4-28-THD)  
29. 6N-4176 [1] SETSCREW  
30. 4N-0445 [1] LEVER-LOAD STOP  
31. 4N-0523 [1] DOWEL-STOP SUPPORT  
32. 2D-6392 [2] SEAL-O-RING  
33. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
34. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
35. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
36. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
37. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
38. 8N-3946 [1] HOUSING AS-GOVERNOR  
39. 4N-2333 [1] PIN-SPRING  
40. 8S-6814 [2] PIN  
41. 9L-9503 [1] DOWEL-HOLLOW  
42. 9S-4182 [1] PLUG  
43. 3J-7354 [1] SEAL-O-RING  
44. 8N-3945 [1] BUSHING-TERMINAL  
45. 2W-4037 [1] SEAL-LIP TYPE  
46. 4N-2677 [1] LEVER AS-RISER  
47. 3H-0442 [1] SEAL-O-RING  
48. 2M-7819 [1] RING-RETAINING  
49. 6L-3921 [1] WASHER-SPECIAL  
50. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
51. 3J-7354 [1] SEAL-O-RING  
52. 9S-4182 [1] PLUG  
53. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
54. 9S-9332 [1] FITTING-ELBOW  
55. 6N-1729 [1] COVER-PUMP HOUSING  
56. 6D-3031 [4] SCREW-SOCKET HEAD (8-32X0.375-IN)  
57. 4N-0941 [1] LEVER-LIMITER  
58. 4N-0505 [1] GASKET-HOUSING  
59. 4N-0935 [1] HOUSING AS  
  4N-3713 [1] SEAL-LIP TYPE  
60. 4N-0595 [1] GASKET-TOP COVER  
61. 9N-6318 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
62. 4N-9150 [1] DEFLECTOR-PULSE  
63. 4N-1826 [2] DOWEL  
64. 2D-6392 [2] SEAL-O-RING  
65. 5P-4810 [1] BEARING  
66. 8N-0628 [1] BEARING  
67. 4N-2333 [1] PIN-SPRING  
68. 8N-0984 [8] PIN-SPRING  
69. 4N-5481 [1] STUD  
70. 1P-4001 [1] FITTING  
71. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
72. 4N-0532 [1] GASKET-COVER  
73. 4N-0531 [1] COVER-IDLE SCREW  
74. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
75. 4N-0938 [1] SHAFT-LEVER  
76. 4N-0940 [1] LEVER-SHUTOFF  
77. 4N-0937 [1] SHAFT-LEVER  
78. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
79. 4N-2954 [1] SLEEVE-CAMSHAFT  
80. 4N-1132 [1] BODY AS-TRANSFER PUMP  
81. 8S-6814 [1] PIN  
82. 4N-1584 [1] SEAL-LIP TYPE  
83. 4N-0636 [1] SEAL-LIP TYPE  
84. 8H-9804 [1] SHAFT-PUMP IDLER  
85. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
86. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
87. 5M-6509 [1] SEAL-O-RING  
88. 4N-1767 [1] VALVE-BYPASS (FUEL)  
89. 4N-0605 [1] SPRING  
90. 4N-4276 [1] SEAT-SPRING  
91. 4N-6408 [1] PISTON AS  
92. 4N-6406 [1] RING-SPACER  
93. 4N-6404 [1] RING-RETAINING  
94. 4N-6407 [1] SPOOL-DASHPOT  
95. 6N-2517 [1] SPRING-DASHPOT  
96. 2W-8623 [1] SEAT-SPRING  
97. 4N-0434 C [1] RISER-GOVERNOR  
98. 4N-2927 [2] RACE-THRUST BEARING  
  7M-7219 [1] BEARING-THRUST  
99. 4N-2953 [1] RING-LOCK  
100. 4N-3779 [1] KEY-CAMSHAFT  
101. 9N-3752 [1] CAMSHAFT AS  
  9N-3751 [1] CAMSHAFT-FUEL PUMP  
102. 8N-2663 [1] CARRIER-WEIGHT  
103. 8N-2662 [3] BOLT-SOCKET HEAD  
104. 4N-1723 [1] SHIELD-CARRIER  
105. 4N-0425 [3] WEIGHT-GOVERNOR  
106. 4N-0511 [3] DOWEL  
107. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
108. 4N-9019 [1] DOWEL  
109. 9N-5822 [1] WASHER-THRUST  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04
New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other
1980/10/01
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL & MARINE ENGINES
Check Valve & Bypass Valve
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3208 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
4W-5604 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5603 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5602 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5601 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5600 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8819 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-7540 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-7539 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5606 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5607 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5608 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5609 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5610 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5616 PUMP GP-GOV & FUEL INJ
4W-5636 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-5637 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.