AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-0350 WIRING GP-INSTRUMENT PANEL PART OF 2W-1163, 2W-2856, 6N-0358 PANEL GP-INSTRUMENT AN ATTACHMENT 3208


ELECTRICAL AND STARTING SYSTEM
WIRING GP
ENCLOSURES, GUARDS AND BASES
BASE GP
OPERATOR STATION
PANEL GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 Industrial Engine Naturally Aspirated 90N52893-UP SEBP1306 3208 90N   (2018)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
FASTENER GP-WIRING HARNESS
7W-9552 FASTENER GP-WIRING HARNESS
3L-6655 WIRING GP-ELECTRIC STARTING
6N-0350 WIRING GP-INSTRUMENT PANEL
 

#SEBP13060670
 

6N-0350: WIRING GP-INSTRUMENT PANEL

6N-0350 WIRING GP-INSTRUMENT PANEL
PART OF 2W-1163, 2W-2856, 6N-0358 PANEL GP-INSTRUMENT
AN ATTACHMENT
i00405478 SEBP1306
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  009-8708 [2] BOOT-TERMINAL  
  1H-5166 [3] CLIP  
  2L-9724 [3] CLIP-WIRE  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  6L-3483 [2] COVER-TERMINAL  
  8L-8413 [40] STRAP-CABLE  
  3S-2093 [10] STRAP-CABLE  
  2L-8065 [2] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)(RELAY SWITCH "C" & "B")  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)(START SWITCH "1")  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)(FUEL SOLENOID)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)(START SWITCH "B")  
  2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)(START MOTOR SOLENOID)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)(START SWITCH "5")  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)(START MOTOR SOLENOID)  
  2L-8054 [1] TERMINAL-RING (6-GA, 1/2-IN SCREW)(ALTERNATOR MOUNTING BRACKET)  
  2L-8049 [1] TERMINAL-RING (6-GA, NO. 10 SCREW)(AMMETER)  
  2L-8054 [1] TERMINAL-RING (6-GA, 1/2-IN SCREW)(START MOTOR)  
  2L-8051 [1] TERMINAL-RING (6-GA, 5/16-IN SCREW)(PAN RAIL)  
  2L-8054 [1] TERMINAL-RING (6-GA, 1/2-IN SCREW)(START MOTOR SOLENOID)  
  2L-8049 [1] TERMINAL-RING (6-GA, NO. 10 SCREW)(ALTERNATOR)  
  2L-8051 [1] TERMINAL-RING (6-GA, 5/16-IN SCREW)(DELCO 10 SI)  
  2L-8049 [1] TERMINAL-RING (6-GA, NO. 10 SCREW)(ALTERNATOR OUTPUT)  
  2L-8049 [1] TERMINAL-RING (6-GA, NO. 10 SCREW)(AMMETER)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
  2L-8074 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)(WATER TEMP SWITCH)  
  2L-8081 [1] TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)(LIFTING EYE BOLT)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)(OIL PRESSURE SWITCH)  
  2L-8074 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)(WATER TEMP SWITCH)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)(OIL PRESSURE SWITCH)  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)(RELAY SWITCH "B" & "S")  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)(ALTERNATOR HARNESS TO RELAY C)  
  2L-8081 [1] TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)(HARNESS TO START SOLENOID)  
  2L-8076 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8076 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8076 [3] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8076 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)(ALTERNATOR HARNESS TO ALT. NEG)  
   
    THE FOLLOWING WIRES ARE AVAILABLE:
  5P-5624 B WIRE (14-GA, BLACK)  
  5P-5622 B WIRE (10-GA, BLACK)  
  5P-5675 B WIRE (6-GA, BLACK)  
  6A-3626 B WIRE-LIGHTING  
  B   USE AS REQUIRED
 

#SEBP13060671
 

1N-4892: BASE GP-ENGINE

1N-4892 BASE GP-ENGINE
AN ATTACHMENT
i00352761 SEBP1306
1N4892 BASE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-6384 [1] BASE AS-ENGINE  
2. 8S-9092 [4] BOLT (5/8-11X2.25-IN)  
3. 5P-8247 [8] WASHER-HARD (17X32X3.5-MM THK)  
  5B-3428 [4] WASHER  
  1D-4720 [4] NUT (5/8-11-THD)  
 

#SEBP13060672
 

8M-7892: AMMETER GP

8M-7892 AMMETER GP
60-AMPERE
PART OF 6N-0355, 6N-0356, 7W-3581 PANEL GP-INSTRUMENT
FOR USE WITH ALTERNATOR
AN ATTACHMENT
i00695220 SEBP1306
8M7892 AMMETER GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8914 [1] AMMETER AS (60-AMPERE)  
   
  6V-3507 F [1] SEAL-RECTANGULAR  
  F   NOT SHOWN
 

#SEBP13060673
 

5L-9895: GAUGE GP

5L-9895 GAUGE GP -ENGINE OIL PRESSURE, WATER TEMPERATURE
24-VOLT TO 32-VOLT
AN ATTACHMENT
i00384005 SEBP1306
5L9895 GAUGE GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2937 CY [1] GAUGE GP-ENGINE OIL PRESSURE  
2. 5L-7441 [2] RESISTOR UNIT (65-OHM, 32-VOLT)  
3. 9X-1124 C [1] SENDER AS-PRESSURE (ENGINE OIL)  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  4B-2049 [1] NUT (10-32-THD)  
  8F-1434 [1] LOCKWASHER  
4. 6B-5072 [1] BUSHING-REDUCING  
5. 7W-2060 C [1] GAUGE (WATER TEMPERATURE)  
6. 4M-5317 B [1] BUSHING-REDUCING  
7. 3L-6521 B [1] TEE-SERVICE  
8. 2L-3402 [1] SWITCH AS (PRESSURE)(ENGINE OIL)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
9. 5L-7442 [1] SENDING UNIT (24-VOLT)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060674
 

7W-2937: GAUGE GP-ENGINE OIL PRESSURE

7W-2937 GAUGE GP-ENGINE OIL PRESSURE
24-VOLT
PART OF 5L-9895 GAUGE GP
AN ATTACHMENT
i01382494 SEBP1306
7W2937 GAUGE GP-ENGINE OIL PRESSURE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8368 [3] NUT (6-32-THD)  
2. 4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
3. 3L-8187 [3] LOCKWASHER  
4. 6V-8377 [2] NUT (8-32-THD)  
5. 9B-7233 [2] LOCKWASHER  
   
  6V-3507 F [1] SEAL-RECTANGULAR  
  F   NOT SHOWN
 

#SEBP13060675
 

6N-0224: METER GP-SERVICE

6N-0224 METER GP-SERVICE
Type 1
AN ATTACHMENT
i00405384 SEBP1306
6N0224 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3700 [1] METER GP-SERVICE  
2. 6N-0223 [1] BRACKET  
3. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
  1D-4716 [2] NUT-FULL (5/16-18-THD)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
5. 2L-3402 JL [1] SWITCH AS (PRESSURE)(OIL)  
6. 2N-1931 JL [1] ELBOW-PIPE  
7. 5P-5629 DJ WIRE (14-GA, BLACK)(1M)  
8. 3S-2093 B [3] STRAP-CABLE  
9. 4B-2043 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
10. 2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
11. 2N-1086 [1] CABLE AS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  J   USE WITHOUT SAFETY PANEL
  L   USE WITHOUT ALTERNATOR
 

#SEBP13060676
 

6N-0224: METER GP-SERVICE

6N-0224 METER GP-SERVICE
Type 2
AN ATTACHMENT
i00405387 SEBP1306
6N0224 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9587 [1] CONNECTOR  
2. 6N-0223 [1] BRACKET  
3. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
  1D-4716 [2] NUT-FULL (5/16-18-THD)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 2L-8075 B [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
5. 2L-3402 B [1] SWITCH AS (PRESSURE)(OIL PRESSURE)  
6. 2N-1931 B [1] ELBOW-PIPE (45 DEGREE)  
7. 5P-5629 BD WIRE (14-GA, BLACK)  
8. 3S-2093 [3] STRAP-CABLE  
9. 1N-4377 [1] CABLE AS  
  5P-5624 BD WIRE (14-GA, BLACK)  
  5P-5610 [1] CONNECTOR  
10. 2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
11. 9W-1493 [1] KIT-SERVICE METER  
    (INCLUDES FILM, SERVICE METER, AND WIRE AS.)
12. 3P-1823 B [1] ADAPTER-PIPE  
  7J-8611 BF [1] ELBOW-PIPE (90 DEGREE)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  F   NOT SHOWN
 

#SEBP13060677
 

6N-0224: METER GP-SERVICE

6N-0224 METER GP-SERVICE
Type 3
AN ATTACHMENT
i00405391 SEBP1306
6N0224 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4571 C [2] TERMINAL-BLADE (14-GA TO 16-GA)  
2. 6N-0223 [1] BRACKET  
3. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
  1D-4716 [2] NUT-FULL (5/16-18-THD)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 2L-8075 B [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
5. 2L-3402 B [1] SWITCH AS (PRESSURE)(OIL PRESSURE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
6. 5P-5624 BD WIRE (14-GA, BLACK)  
7. 7J-8611 B [1] ELBOW-PIPE  
8. 9G-6762 Y [1] METER GP-SERVICE  
9. 3P-1823 B [1] ADAPTER-PIPE  
10. 2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  3S-2093 BCF [3] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060678
 

7W-4335: METER GP-SERVICE

7W-4335 METER GP-SERVICE
S/N 90N65964-UP
SELF POWERED
AN ATTACHMENT
i00411930 SEBP1306
7W4335 METER GP-SERVICE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
2. 6N-0223 [1] BRACKET  
3. 6T-7337 [1] METER GP-SERVICE  
4. 1B-7182 [2] BOLT (5/16-18X1.25-IN)  
  5S-0003 [2] NUT (5/16-18-THD)  
  9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
5. 5P-5624 BD WIRE (14-GA, BLACK)  
6. 7W-3354 Y [1] SENSOR GP-SPEED  
7. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
8. 9G-9151 [1] CLIP  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP13060679
 

9G-6762: METER-HOUR

9G-6762 METER-HOUR
PART OF 6N-0224 METER GP-SERVICE
FIELD REPLACEMENT ORDER @@@@@ 9W-1490@@@@@
FOR USE WITH 12 VOLT OR 24 VOLT ELECTRICAL SYSTEMS
AN ATTACHMENT
i00170694 SEBP1306
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Wiring Harness Conduit Component Sizes {1408}
1995/02/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
INSTALLING THE 1041820 WIRING KIT{7417}
INSTALLING THE 1041820 WIRING KIT{7417}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Wiring Diagram-Grounded System{1400}
Wiring Diagram-Grounded System{1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 3208 :

3L-6655 WIRING GP-ELECTRIC STARTING
SWITCH GP-TEMPERATURE
9Y-0914 SWITCH GP-TEMPERATURE
SWITCH GP-START
9W-1077 SWITCH GP-START
SWITCH GP-START
9G-1480 SWITCH GP-START
SWITCH GP-REMOTE STARTING
7W-6402 SWITCH GP-REMOTE STARTING
SWITCH GP-REMOTE STARTING
4W-0555 SWITCH GP-REMOTE STARTING
SWITCH GP-REMOTE STARTING
3N-8782 SWITCH GP-REMOTE STARTING
3N-8782 SWITCH GP-REMOTE STARTING
BASE GP-ENGINE
1N-4892 BASE GP-ENGINE
AMMETER GP
8M-7892 AMMETER GP
GAUGE GP
5L-9895 GAUGE GP
GAUGE GP-ENGINE OIL PRESSURE
7W-2937 GAUGE GP-ENGINE OIL PRESSURE
METER GP-SERVICE
6N-0224 METER GP-SERVICE
METER GP-SERVICE
6N-0224 METER GP-SERVICE
METER GP-SERVICE
6N-0224 METER GP-SERVICE
METER GP-SERVICE
7W-4335 METER GP-SERVICE

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.