ENGINE ARRANGEMENT
ENGINE ARENGINE ARRANGEMENT
ENGINE AR#SEBP13070050
2W-4956: ENGINE AR
2W4956 ENGINE ARRANGEMENT-PART 2 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| COOLING SYSTEM | ||||
| 9N-0729 Y | [1] | OIL COOLER GROUP | ||
| 9N-0418 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE AND EXHAUST SYSTEM | ||||
| 9L-6258 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 2W-4896 Y | [1] | INLET MANIFOLD GROUP | ||
| 9N-0735 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM AND GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-0740 Y | [1] | GOVERNOR AND FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 9N-0396 Y | [1] | FUEL FILTER GROUP | ||
| 2W-9186 Y | [1] | FUEL FILTER LINES GROUP | ||
| SERIAL NO. 51Z54 TO 51Z1953 INCLUSIVE | ||||
| 9N-5614 Y | [1] | FUEL FILTER LINES GROUP | ||
| SERIAL NO. 51Z1954-UP | ||||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 51Z54 TO 51Z4577 & 51Z4584-UP | ||||
| 2W-5372 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 51Z4578 TO 5IZ4583 INCLUSIVE | ||||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-3757 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 51Z54 TO 51Z10788 INCLUSIVE | ||||
| 4W-3978 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 51Z10789-UP | ||||
| 2W-6320 Y | [1] | WATER SEPARATOR GROUP | ||
| 5N-8298 | [2] | FILM-3208 | ||
| ON R.H. AND L.H. VALVE COVERS | ||||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070051
2W-4957: ENGINE AR
2W4957 ENGINE ARRANGEMENT-PART 1 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-3761 Y | [1] | CYLINDER BLOCK GROUP | ||
| 9N-0728 Y | [1] | CAMSHAFT GROUP | ||
| 9L-6065 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 9N-6435 Y | [8] | CONNECTING ROD AND PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 9L-6560 Y | [1] | CYLINDER BLOCK PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-0190 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-1105 RY | [1] | CYLINDER HEAD GROUP | ||
| 9N-0195 Y | [1] | LIFTING GROUP-R.H. SIDE | ||
| 9N-0191 Y | [1] | LIFTING GROUP-L.H. SIDE | ||
| 9N-0487 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 1W-7769 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 9N-5590 Y | [1] | PULLEY AND DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| 9N-6388 Y | [1] | SOUND SUPPRESSION PANEL GROUP | ||
| LUBRICATION SYSTEM | ||||
| 1W-2638 Y | [1] | OIL FILTER GROUP | ||
| 9N-6336 Y | [1] | OIL LINES GROUP | ||
| 1W-2206 Y | [1] | OIL PUMP GROUP | ||
| 9N-6162 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070052
2W-4957: ENGINE AR
2W4957 ENGINE ARRANGEMENT-PART 2 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| COOLING SYSTEM | ||||
| 9N-0729 Y | [1] | OIL COOLER GROUP | ||
| 9N-2028 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE AND EXHAUST SYSTEM | ||||
| 9L-6258 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-1214 Y | [1] | INLET MANIFOLD GROUP | ||
| 9N-0735 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM AND GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-0740 Y | [1] | GOVERNOR AND FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 9N-2815 Y | [1] | FUEL FILTER GROUP | ||
| 9N-5624 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-3757 Y | [1] | GOVERNOR AND FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 51Z54 TO 51Z10784 INCLUSIVE | ||||
| 4W-3978 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 51Z10785-UP | ||||
| 9N-5623 Y | [1] | WATER SEPARATOR GROUP | ||
| 5N-8298 | [2] | FILM-3208 | ||
| ON R.H. AND L.H. VALVE COVERS | ||||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070053
2W-4958: ENGINE AR
2W4958 ENGINE ARRANGEMENT-PART 1 OF 2
SERIAL NO. 51Z54 TO 51Z13472 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z13472 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-3761 Y | [1] | CYLINDER BLOCK GROUP | ||
| 9N-0728 Y | [1] | CAMSHAFT GROUP | ||
| 9L-6065 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 1W-2200 Y | [8] | CONNECTING ROD AND PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 9L-6560 Y | [1] | CYLINDER BLOCK PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-0169 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-1105 RY | [1] | CYLINDER HEAD GROUP | ||
| 9N-0191 Y | [1] | LIFTING GROUP-L.H. SIDE | ||
| 9N-0487 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 2W-6415 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 9N-5590 Y | [1] | PULLEY AND DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| 9N-6388 Y | [1] | SOUND SUPPRESSION PANEL GROUP | ||
| LUBRICATION SYSTEM | ||||
| 1W-2638 Y | [1] | OIL FILTER GROUP | ||
| 9N-6334 Y | [1] | OIL LINES GROUP | ||
| 1W-2206 Y | [1] | OIL PUMP GROUP | ||
| 9N-6168 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070054
2W-4958: ENGINE AR
2W4958 ENGINE ARRANGEMENT-PART 2 OF 2
SERIAL NO. 51Z54 TO 51Z13472 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z13472 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| COOLING SYSTEM | ||||
| 9N-0729 Y | [1] | OIL COOLER GROUP | ||
| 9N-0418 Y | [1] | WATER LINES GROUP | ||
| 9N-3777 Y | [1] | WATER PUMP GROUP | ||
| INTAKE AND EXHAUST SYSTEM | ||||
| 9L-6258 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-1214 Y | [1] | INLET MANIFOLD GROUP | ||
| 9N-0735 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM AND GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-8062 Y | [1] | GOVERNOR AND FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 9N-0396 Y | [1] | FUEL FILTER GROUP | ||
| 2W-9186 Y | [1] | FUEL FILTER LINES GROUP | ||
| SERIAL NO. 51Z54 TO 51Z1948 INCLUSIVE | ||||
| 9N-5614 Y | [1] | FUEL FILTER LINES GROUP | ||
| SERIAL NO. 51Z1949-UP | ||||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 51Z54 TO 51Z4488 & 51Z4620-UP | ||||
| 2W-5372 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 51Z4489 TO 51Z46199 INCLUSIVE | ||||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-5139 RY | [1] | GOVERNOR AND FUEL INJECTION PUMP GROUP | ||
| 2W-6320 Y | [1] | WATER SEPARATOR GROUP | ||
| 5N-8299 | [2] | FILM-3208 | ||
| ON R.H. AND L.H. VALVE COVERS | ||||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070055
2W-4959: ENGINE AR
2W4959 ENGINE ARRANGEMENT-PART 1 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-3761 Y | [1] | CYLINDER BLOCK GROUP | ||
| 9N-0728 Y | [1] | CAMSHAFT GROUP | ||
| 9L-6065 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 1W-2200 Y | [8] | CONNECTING ROD AND PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 9L-6560 Y | [1] | CYLINDER BLOCK PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-0169 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-1105 RY | [1] | CYLINDER HEAD GROUP | ||
| 4N-6808 Y | [1] | LIFTING GROUP | ||
| 9N-0487 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 9N-5590 Y | [1] | PULLEY AND DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| 9N-6388 Y | [1] | SOUND SUPPRESSION PANEL GROUP | ||
| LUBRICATION SYSTEM | ||||
| 1W-2638 Y | [1] | OIL FILTER GROUP | ||
| 9N-6334 Y | [1] | OIL LINES GROUP | ||
| 1W-2206 Y | [1] | OIL PUMP GROUP | ||
| 9N-6168 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070056
2W-4959: ENGINE AR
2W4959 ENGINE ARRANGEMENT-PART 2 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| COOLING SYSTEM | ||||
| 9N-0729 Y | [1] | OIL COOLER GROUP | ||
| 9N-0418 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE AND EXHAUST SYSTEM | ||||
| 9L-6258 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 2W-4896 Y | [1] | INLET MANIFOLD GROUP | ||
| 9N-0735 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM AND GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-8062 Y | [1] | GOVERNOR AND FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 9N-0396 Y | [1] | FUEL FILTER GROUP | ||
| 2W-9186 Y | [1] | FUEL FILTER LINES GROUP | ||
| SERIAL NO. 51Z54 TO 51Z1954 INCLUSIVE | ||||
| 9N-5614 Y | [1] | FUEL FILTER LINES GROUP | ||
| SERIAL NO. 51Z1955-UP | ||||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 51Z54 TO 51Z4503 & 51Z4586-UP | ||||
| 2W-5372 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 51Z4504 TO 51Z4585 INCLUSIVE | ||||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-5139 RY | [1] | GOVERNOR AND FUEL INJECTION PUMP GROUP | ||
| 2W-6320 Y | [1] | WATER SEPARATOR GROUP | ||
| 5N-8299 | [2] | FILM-3208 | ||
| ON R.H. AND L.H. VALVE COVERS | ||||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070057
2W-4960: ENGINE AR
2W4960 ENGINE ARRANGEMENT-PART 1 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-3761 Y | [1] | CYLINDER BLOCK GROUP | ||
| 9N-0728 Y | [1] | CAMSHAFT GROUP | ||
| 9L-6065 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 1W-2200 Y | [8] | CONNECTING ROD AND PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 9L-6560 Y | [1] | CYLINDER BLOCK PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-0190 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-1105 RY | [1] | CYLINDER HEAD GROUP | ||
| 9N-0195 Y | [1] | LIFTING GROUP-R.H. SIDE | ||
| 9N-0191 Y | [1] | LIFTING GROUP-L.H. SIDE | ||
| 9N-0487 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 1W-7769 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 9N-5590 Y | [1] | PULLEY AND DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| 9N-6388 Y | [1] | SOUND SUPPRESSION PANEL GROUP | ||
| LUBRICATION SYSTEM | ||||
| 1W-2638 Y | [1] | OIL FILTER GROUP | ||
| 9N-6336 Y | [1] | OIL LINES GROUP | ||
| 1W-2206 Y | [1] | OIL PUMP GROUP | ||
| 9N-6162 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070058
2W-4960: ENGINE AR
2W4960 ENGINE ARRANGEMENT-PART 2 OF 2
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z40493 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| COOLING SYSTEM | ||||
| 9N-0729 Y | [1] | OIL COOLER GROUP | ||
| 9N-2028 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE AND EXHAUST SYSTEM | ||||
| 9L-6258 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-1214 Y | [1] | INLET MANIFOLD GROUP | ||
| 9N-0735 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM AND GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-8062 Y | [1] | GOVERNOR AND FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 9N-2815 Y | [1] | FUEL FILTER GROUP | ||
| 9N-5624 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-5139 RY | [1] | GOVERNOR AND FUEL INJECTION PUMP GROUP | ||
| 9N-5623 Y | [1] | WATER SEPARATOR GROUP | ||
| 5N-8299 | [2] | FILM-3208 | ||
| ON R.H. AND L.H. VALVE COVERS | ||||
| NOTE: REFER TO INDEX FOR PAGE LOCATION | ||||
| OF GASKET KITS | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP13070059
2W-4961: ENGINE AR
2W4961 ENGINE ARRANGEMENT-PART 1 OF 2
SERIAL NO. 51Z54 TO 51Z13472 INCLUSIVE
SERIAL NO. 51Z54 TO 51Z13472 INCLUSIVE
For full view, you need register
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-3761 Y | [1] | CYLINDER BLOCK GROUP | ||
| 9N-0728 Y | [1] | CAMSHAFT GROUP | ||
| 9L-6065 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 1W-2200 Y | [8] | CONNECTING ROD AND PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 9L-6560 Y | [1] | CYLINDER BLOCK PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-0169 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-1105 RY | [1] | CYLINDER HEAD GROUP | ||
| 9N-0191 Y | [1] | LIFTING GROUP-L.H. SIDE | ||
| 9N-0487 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 2W-6415 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 9N-5590 Y | [1] | PULLEY AND DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| 9N-6388 Y | [1] | SOUND SUPPRESSION PANEL GROUP | ||
| LUBRICATION SYSTEM | ||||
| 1W-2638 Y | [1] | OIL FILTER GROUP | ||
| 9N-6334 Y | [1] | OIL LINES GROUP | ||
| 1W-2206 Y | [1] | OIL PUMP GROUP | ||
| 9N-6168 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
New Engines Rated @ 160 kW (210 hp) @ 2600 rpm Must Be Rerated When Used To Replace 2800 rpm Engines
1987/07/01
1987/07/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18
1978/01/18
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Installation of 0R0776 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0776 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0776 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
installation of 0r0779 remanufactured 3208 truck engine (natural aspiration){1000}
installation of 0r0779 remanufactured 3208 truck engine (natural aspiration){1000}
installation of 0r0779 remanufactured 3208 truck engine (natural aspiration){1000}
Installation of 0R0975 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0975 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0975 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0976 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0976 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 0R0976 Remanufactured 3208 Truck Engine (Natural Aspiration){1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Replacement of 3208 DINA Truck Engine in GM "C7 Series" (GMC TOP KICK; Chevrolet KODIAK) Truck Chassis{1000}
Replacement of 3208 DINA Truck Engine in GM "C7 Series" (GMC TOP KICK; Chevrolet KODIAK) Truck Chassis{1000}
Replacement of 3208 DINA Truck Engine in GM "C7 Series" (GMC TOP KICK; Chevrolet KODIAK) Truck Chassis{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Remanufactured Water Pumps For 3204 And 3208 Engines
Remanufactured Water Pumps For 3204 And 3208 Engines
Remanufactured Water Pumps For 3204 And 3208 Engines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Service Magazine
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
1985/04/08
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
1985/08/05
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08
2001/01/08
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
Caterpillar Parts SIS Catalog 3208 :
Truck sale:
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
