9N6435 CONNECTING ROD AND PISTON GROUP-8 REQUIRED SERIAL NO. 51Z2784-UP 2W4841-PAGE 55C 3208 TRUCK ENGINE



BASIC ENGINE
PISTON & ROD GP
CYLINDER HEAD GP

TRUCK ENGINE 3208 TRUCK ENGINE 32Y
 3208 TRUCK ENGINE 32Y68441-UP FORD MOTOR CO. SEBP1307 3208 32Y   (1978)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON GP
2W-4841 PISTON GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON GP
7W-3910 PISTON GP
PISTON & ROD GP
7W-3911 PISTON & ROD GP
PISTON GP
7W-3900 PISTON GP
 

#SEBP13070150
 

9N-6435: PISTON & ROD GP

9N6435 CONNECTING ROD AND PISTON GROUP-8 REQUIRED
SERIAL NO. 51Z2784-UP
2W4841-PAGE 55C
c402056 SEBP1307
9N6435 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7N-9803 [ 1] PIN-PISTON  
2. 1W-2961 R [ 1] ROD AS-CONNECTION  
3. 8N-0701 [ 1] BEARING-SLEEVE  
4. 9N-3832 [ 2] BOLT-CONNECTING ROD  
5. 9L-7669 [ 2] NUT-CONNECTING ROD  
6. 4W-8090 C [ 1] BEARING-ROD (STANDARD)  
  9N-5920 A [ 1] BEARING-CONNECTING ROD .25MM(.010IN)US  
  9N-5921 A [ 1] BEARING-CONNECTING ROD .51MM(.020IN)US  
  9N-5922 A [ 1] BEARING-CONNECTING ROD 1.27MM(.050IN)US  
7. 8N-7294 [ 2] RETAINER-PIN  
8. 2W-4841 Y [ 1] PISTON GP (STANDARD)  
    NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
    INDICATES CHANGE
    SEPARATE ILLUSTRATION
 

#SEBP13070151
 

7W-3910: PISTON GP

7W3910 PISTON GROUP
PART OF 7W3911 CONNECTING ROD & PISTON
c329388 SEBP1307
7W3910 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 9L-6233 [1] RING-PISTON-TOP (COMPRESSION)  
2. 2W-8045 [1] RING AS-PISTON (OIL)  
3. 7W-3847 [1] BODY AS-PISTON  
 

#SEBP13070152
 

7W-3911: PISTON & ROD GP

7W3911 CONNECTING ROD & PISTON GROUP-8 REQUIRED
7W3910-PAGE 55D
c329389 SEBP1307
7W3911 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7W-3910 Y [1] PISTON GP  
2. 1W-2961 R [1] ROD AS-CONNECTION  
3. 8N-0701 [1] BEARING-SLEEVE  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
5. 9L-7669 [2] NUT-CONNECTING ROD  
6. 4W-8090 [1] BEARING-ROD (STANDARD)  
7. 8N-7294 [2] RETAINER-PIN  
8. 7N-9803 [1] PIN-PISTON  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13070153
 

7W-3900: PISTON GP

7W3900 PISTON GROUP
PART OF 7W3901 CONNECTING ROD & PISTON
c539343 SEBP1307
7W3900 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 9L-6233 [1] RING-PISTON-TOP (COMPRESSION)  
2. 7E-7297 [1] RING AS-PISTON (OIL)  
3. 7W-3846 [1] BODY AS-PISTON  
 

#SEBP13070154
 

7W-3901: PISTON & ROD GP

7W3901 CONNECTING ROD & PISTON GROUP-8 REQUIRED
7W3900-PAGE 55E
c489749 SEBP1307
7W3901 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7W-3900 Y [1] PISTON GP  
2. 7E-4728 [1] ROD AS-CONNECTING  
3. 8N-0701 [1] BEARING-SLEEVE  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
5. 9L-7669 [2] NUT-CONNECTING ROD  
6. 7E-7894 [1] BEARING-ROD  
7. 8N-7294 [2] RETAINER-PIN  
8. 7N-9803 [1] PIN-PISTON  
  Y   SEPARATE ILLUSTRATION
 

#SEBP13070155
 

4W-8261: RING GP-PISTON

4W8261 PISTON RING GROUP--.51 MM (.020 IN.) OVERSIZE
FOR EXCESS OIL CONSUMOTION. NOT FOR USE WITH TURBOCHARGED
ENGINES. AN ATTACHMENT
SEBP13070155 SEBP1307
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
   
   
   
   
   
   
  4W-8260 [1] RING--TOP  
   
   
   
  2W-8416 [1] RING--OIL  
 

#SEBP13070156
 

9N-1105: CYLINDER HEAD GP

R*9N1105 CYLINDER HEAD GROUP-*R
SERIAL NO. 32Y68441 TO 32Y74574, 74591 AND 32Y74603 INCLUSIVE
c227148 SEBP1307
9N1105 CYLINDER HEAD GP Parts scheme 9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG-PIPE  
2. 5M-6213 [3] PLUG-PIPE  
3. 0L-1329 [8] BOLT (1/2-13X3 IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5 IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25 IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75 IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25 IN)(LOCATION G)  
9. 9N-3111 [2] CYLINDER HEAD AS  
    (EACH INCLUDES)
  9L-7657 [1] PLUG-CUP  
10. 9N-2837 [4] INSERT-SEAT (EXHAUST)  
11. 0L-1329 [3] BOLT (1/2-13X3 IN)(LOCATION H)  
12. 8M-5860 [4] PLUG-CUP  
13. 5M-6214 [1] PLUG-PIPE  
14. 5M-6213 [1] PLUG-PIPE  
15. 0S-1571 [1] BOLT (3/8-16X1.75 IN)(LOCATION C-LEFT HEAD)  
  9L-9166 [1] STUDBOLT (3/8-16X3.63 IN)(LEFT HEAD)  
16. 9L-8889 [16] WASHER  
17. 9N-3387 [16] SPRING-VALVE OUTER  
18. 9L-9425 [16] RETAINER-SPRING  
19. 2A-4429 [32] LOCK-RETAINER  
20. 9L-9164 [2] GASKET-CYLINDER HEAD  
21. 9L-7683 [8] VALVE-EXHAUST  
22. 9L-7682 [8] VALVE-INLET  
  2N-8943 A [8] INSERT-VALVE SEAT (INLET)  
23. 9N-0906 [16] SPACER  
 

#SEBP13070157
 

9N-1105: CYLINDER HEAD GP

R*9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 32Y74575 TO 32Y74590, 74592 TO 74602 AND 32Y74604 TO 32Y82824
INCLUSIVE. 1W6221-PAGE 57E
c330963 SEBP1307
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 1W-6221 CRY [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (LOCATION A)  
4. 9L-9164 [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT 4.44CM(1.75IN)  
    (LEFT HEAD)
6. 5B-9603 [6] BOLT (LOCATION D)  
7. 0L-1329 [8] BOLT (LOCATION E)  
8. 2B-2006 [12] BOLT (LOCATION F)  
9. 2B-0947 [8] BOLT (LOCATION G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 7H-3171 [1] PLUG-PIPE (LEFT HEAD)  
13. 5M-6213 [1] PLUG (RIGHT HEAD)  
14. 5M-6214 [2] PLUG-PIPE  
15. 9L-9166 [1] STUDBOLT (RIGHT HEAD)  
    9.14CM(3.6IN)LONG
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13070158
 

9N-1105: CYLINDER HEAD GP

R*9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 32Y82825 TO 32Y99380 INCLUSIVE
1W4241-PAGE 57F
c330964 SEBP1307
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 1W-4241 CRY [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (LOCATION A)  
4. 9L-9164 [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT 4.44CM(1.75IN)LONG  
    (LEFT HEAD)
6. 5B-9603 [6] BOLT (LOCATION D)  
7. 0L-1329 [8] BOLT (LOCATION E)  
8. 2B-2006 [12] BOLT (LOCATION F)  
9. 2B-0947 [8] BOLT (LOCATION G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 7H-3171 [1] PLUG-PIPE (LEFT HEAD)  
  5M-6213 [1] PLUG (RIGHT HEAD)  
13. 2B-0858 [2] PLUG-PIPE  
14. 9L-9166 [1] STUDBOLT (RIGHT HEAD)  
    9.14CM(3.6 IN)LONG
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP13070159
 

9N-1105: CYLINDER HEAD GP

R*9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 32Y99381 TO 32Y99999 AND 51Z1-UP
1W4241-PAGE 57F
c459607 SEBP1307
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 1W-4241 RY [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (LOCATION A)  
4. 7C-1599 C [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (LEFT HEAD)  
    4.44CM (1.748IN) LONG
6. 5B-9603 [6] BOLT (LOCATION D)  
7. 0L-1329 [8] BOLT (LOCATION E)  
8. 2B-2006 [12] BOLT (LOCATION F)  
9. 2B-0947 [8] BOLT (LOCATION G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 4L-2768 [1] PLUG-PIPE (LEFT HEAD)  
  5M-6213 [1] PLUG (RIGHT HEAD)  
13. 2B-0858 [2] PLUG-PIPE  
14. 9L-9166 [1] STUDBOLT (RIGHT HEAD)  
    9.14CM (3.598IN) LONG
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Inspect Piston Skirts During Engine Overhaul Procedures
1981/07/07
Top Rings For Pistons Have Two Designs
1981/09/09
Inspection Marks On Bearings
1982/05/19
Carbon Cutting On Piston Top Land
1982/06/23
List Of Main And Connecting Rod Bearings Currently Available
1982/06/23
New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/01
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
New Piston Design
1983/01/26
Parts Service Information For Pistons
1983/03/02
Installation Of Bearing For Connecting Rod Piston Pin
1983/05/18
New Piston Oil Rings
1983/10/05
Reuse Of Engine Bearings
1983/12/21
Remanufactured Connecting Rod Assemblies
1984/02/15
Parts Service Information For Pistons
1984/02/15
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26
Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts
1984/09/26
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01
Stepped Compression Ring Temporarily Used
1988/04/01
New Connecting Rod And Main Bearing Kits Available
1989/10/01
Parts Service Information For Pistons
1990/05/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/01
Engine News
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1979/03/14
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring
1977/12/14
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
3208 TRUCK ENGINE
Pistons And Rings
3208 TRUCK ENGINE
Bearings For Connecting Rods And Mains
3208 TRUCK ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
3208 TRUCK ENGINE
Pistons
3208 TRUCK ENGINE
Service Magazine
Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/08
Top Rings For Pistons Have Two Designs{1215,1214}
1981/07/13
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Compression Ring Available For Control Of Excessive Oil Consumption{1215}
1982/08/16
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Design Decreases Oil Consumption{1214,1215}
1982/12/20
Parts Service Information For Pistons{1214,1225}
1983/01/31
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Oil Rings{1215}
1983/09/05
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Parts Service Information For Pistons{1214,1225}
1984/01/09
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts{1250}
1984/08/13
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Changes To Naturally Aspirated Truck Engines For 1985{1000,1200,1214,1218,1250,1251,1254}
1985/04/08
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring{1213,1215}
1977/12/12
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Stepped Compression Ring Temporarily Used{1214,1215}
1988/04/04
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218,1219}
1979/03/05
New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts{1214,1272}
1979/04/02
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

Caterpillar Parts SIS Catalog 3208 :

PISTON GP
2W-4841 PISTON GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
4W-8269 RING GP-PISTON
PISTON & ROD GP
1W-2200 PISTON & ROD GP
PISTON GP
2W-8413 PISTON GP
PISTON & ROD GP
1W-2200 PISTON & ROD GP
PISTON & ROD GP
1W-2200 PISTON & ROD GP
PISTON GP
7W-3910 PISTON GP
PISTON & ROD GP
7W-3911 PISTON & ROD GP
PISTON GP
7W-3900 PISTON GP
PISTON & ROD GP
7W-3901 PISTON & ROD GP
4W-8261 RING GP-PISTON
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California