AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N9298 FUEL TRANSFER PUMP GROUP SERIAL NO. 50Y1 TO 50Y423 INCLUSIVE PART OF 8N9494 FUEL TRANSFER PUMP GROUP SHOWN ON PAGE 145 3512


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
FILTER GP-FUEL

MARINE ENGINE 3512 MARINE ENGINE 50Y
 3512 MARINE ENGINE 50Y00001-00646 SEBP1314 3512 50Y   (1980)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-9494 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-9298 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
 

#SEBP13140510
 

8N-9298: PUMP GP-FUEL TRANSFER

8N9298 FUEL TRANSFER PUMP GROUP
SERIAL NO. 50Y1 TO 50Y423 INCLUSIVE
PART OF 8N9494 FUEL TRANSFER PUMP GROUP SHOWN ON PAGE 145
c229018 SEBP1314
8N9298 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 [4] BOLT  
2. 7N-7927 [1] COVER  
3. 7N-7928 [1] GASKET  
4. 7N-7932 [1] SHAFT ASSEM.  
    (Includes)
5. 7N-7930 [1] GEAR (14 teeth)  
6. 8N-9297 [1] BODY ASSEM.  
    (Includes)
7. 7N-4747 [1] PIN  
8. 5P-8217 [1] SEAL  
9. 5P-8216 [1] SEAL  
10. 9S-4180 [1] PLUG  
11. 4J-7533 [1] SEAL  
12. 6J-2419 [1] SEAL  
13. 1J-6809 [1] COVER  
14. 5M-2894 [2] WASHER  
15. 1S-3266 [1] PLUNGER  
16. 3D-2777 [1] SPRING  
17. 2H-3932 [1] SEAL  
18. 3B-1915 [2] BOLT  
19. 9S-4191 [1] PLUG  
20. 3J-1907 [1] SEAL  
21. 8N-2071 [1] POPPET  
22. 8N-2072 [1] SPRING  
23. 2M-9780 [1] SEAL  
24. 9M-4584 [1] CONNECTOR  
25. 7N-7930 [1] GEAR (14 teeth)  
26. 0L-2070 [2] BOLT  
 

#SEBP13140511
 

1N-4478: PUMP GP-FUEL TRANSFER

1N4478 FUEL TRANSFER PUMP GROUP
SERIAL NO. 50Y424-UP
PART OF 8N6151 FUEL TRANSFER PUMP GROUP SHOWN ON PAGE 145A
c601344 SEBP1314
1N4478 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-8178 [1] BOLT  
2. 1W-4008 [1] GASKET  
3. 1W-4010 [1] PLATE AS  
  7C-2870 C [2] BUSHING-TERMINAL  
4. 6V-0895 [2] SEAL-O-RING  
5. 1W-4006 [1] CASING  
6. 1W-6935 [2] SLEEVE  
7. 112-3597 [1] SEAL-LIP  
8. 112-3596 [1] SEAL-LIP  
9. 124-9437 [1] SHAFT AS-DRIVE  
10. 1W-4121 [1] BRACKET AS  
  7C-2870 C [2] BUSHING-TERMINAL  
11. 1W-6936 [1] CAP-RELIEF VALVE  
12. 7W-3556 C [1] WASHER  
13. 1W-4655 [1] SPRING-VALVE  
14. 1W-4007 [1] POPPET-VALVE  
15. 1W-4003 [1] GEAR AS-IDLER  
16. 8S-4710 [1] BOLT  
17. 1W-4005 [1] HEAD AS  
18. 1W-4009 [1] VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13140512
 

8N-7726: FILTER GP-FUEL

8N7726 FUEL FILTER GROUP
SERIAL NO. 50Y1 TO 50Y416 INCLUSIVE
c229004 SEBP1314
8N7726 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [12] BOLT  
2. 5M-2894 [14] WASHER  
3. 4J-4382 [1] PLUG  
4. 1N-2886 [1] HOUSING ASSEM.  
5. 9S-4190 [1] PLUG  
  2M-9780 [1] SEAL  
6. 9S-4182 [3] PLUG  
  3J-7354 [3] SEAL  
7. 1N-2894 [1] COVER  
8. 4M-0189 [2] SEAL  
9. 2S-5100 [1] VALVE  
10. 1N-5999 [1] PLUG  
  7J-0204 [1] SEAL  
11. 0L-1351 [2] BOLT  
12. 001-5600 [1] RING  
13. 8N-9850 [5] ELEMENT ASSEM.  
14. 1N-2896 [1] RETAINER  
15. 2H-3932 [1] SEAL  
16. 1N-2893 [1] COVER  
17. 1N-2895 [1] SPRING  
 

#SEBP13140513
 

8N-7726: FILTER GP-FUEL

8N7726 FUEL FILTER GROUP
SERIAL NO. 50Y417 TO 50Y594 INCLUSIVE
c312978 SEBP1314
8N7726 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [12] BOLT  
2. 5M-2894 [14] WASHER  
3. 4J-4382 [1] PLUG-PIPE  
4. 1W-2884 [1] HOUSING AS-FUEL FLTR  
5. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
6. 9S-4182 C [3] PLUG  
  3J-7354 [3] SEAL-O-RING  
7. 2W-6288 [1] COVER-FILTER HOUSING  
8. 4M-0189 [2] SEAL-O-RING  
9. 2S-5100 [1] VALVE AS-NEEDLE  
10. 9S-4182 C [1] PLUG  
  3J-7354 [1] SEAL-O-RING  
11. 0L-1351 [2] BOLT  
12. 001-5600 C [1] RING-SNAP  
13. 8N-9850 C [5] ELEMENT AS-FUEL FILTER  
14. 1N-2896 [1] RETAINER-SPRING  
15. 3P-1156 [1] SEAL-O-RING  
16. 1W-3298 [1] COVER-FILTER HOUSING  
17. 1N-2895 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13140514
 

8N-7726: FILTER GP-FUEL

8N7726 FUEL FILTER GROUP
SERIAL NO. 50Y595 TO 50Y649 INCLUSIVE
c327886 SEBP1314
8N7726 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [12] BOLT  
2. 5M-2894 [14] WASHER  
3. 4J-4382 [1] PLUG-PIPE  
4. 4W-8918 C [1] HOUSING AS-FUEL  
5. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
6. 9S-4191 C [1] PLUG-O-RING  
  6V-5049 C [1] SEAL-O-RING  
7. 2W-6288 [1] COVER-FILTER HOUSING  
8. 4M-0189 [2] SEAL-O-RING  
9. 2S-5100 [1] VALVE AS-NEEDLE  
10. 9S-4182 C [5] PLUG  
  3J-7354 C [5] SEAL-O-RING  
11. 0L-1351 [2] BOLT  
12. 001-5600 [1] RING-SNAP  
13. 8N-9850 [5] ELEMENT AS-FUEL FILTER  
14. 1N-2896 [1] RETAINER-SPRING  
15. 3P-1156 [1] SEAL-O-RING  
16. 1W-3298 [1] COVER-FILTER HOUSING  
17. 1N-2895 [1] SPRING  
18. 4B-9782 C [1] BALL  
  9N-1752 C [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13140515
 

8N-7726: FILTER GP-FUEL

8N7726 FUEL FILTER GROUP
SERIAL NO. 50Y650-UP
c335566 SEBP1314
8N7726 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 C [10] BOLT  
2. 5M-2894 [14] WASHER  
3. 4J-4382 [1] PLUG-PIPE  
4. 4W-8918 [1] HOUSING AS-FUEL  
5. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
6. 9S-4191 [1] PLUG-O-RING  
  6V-5049 [1] SEAL-O-RING  
7. 2W-6288 [1] COVER-FILTER HOUSING  
8. 5D-5957 C [2] SEAL-O-RING  
9. 2S-5100 [1] VALVE AS-NEEDLE  
10. 9S-4182 [5] PLUG  
  6V-5048 C [5] SEAL-O-RING  
11. 0L-1351 [2] BOLT  
12. 7F-0192 C [2] BOLT  
13. 8N-9850 [5] ELEMENT AS-FUEL FILTER  
14. 2W-9301 C [1] RETAINER-FILTER  
15. 9N-1752 [1] SPRING  
16. 2W-9300 C [1] COVER-FILTER HOUSING  
    (FUEL FILTER HOUSING)
17. 1N-2895 [1] SPRING  
18. 4B-9782 [1] BALL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13140516
 

8N-6355: FILTER GP-FUEL

8N6355 FUEL FILTER GROUP-L.H. SERVICE-FRONT MOUNTED-TYPE 1
AN ATTACHMENT
c229252 SEBP1314
8N6355 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 031-4136 [1] TEE  
2. 2M-9780 [2] SEAL  
3. 8N-6298 [1] TUBE ASSEM.  
4. 1N-4734 [4] CLAMP  
5. 0S-1608 [2] BOLT  
6. 8N-6297 [1] TUBE ASSEM.  
7. 8N-6296 [1] TUBE ASSEM.  
8. 2H-3932 [1] SEAL  
9. 001-5600 [1] RING  
10. 1N-2896 [1] RETAINER  
11. 8N-9850 [5] ELEMENT ASSEM.  
12. 1N-2895 [1] SPRING  
13. 1N-2893 [1] COVER  
14. 0S-1588 [12] BOLT  
15. 5M-2894 [14] WASHER  
16. 4J-4382 [1] PLUG  
17. 0L-1351 [2] BOLT  
18. 9S-4190 [1] PLUG  
19. 9S-4182 [3] PLUG  
  3J-7354 [3] SEAL  
20. 2S-5100 [1] VALVE ASSEM. (needle)  
21. 1N-5999 [1] PLUG  
  7J-0204 [1] SEAL  
22. 1N-2886 [1] HOUSING ASSEM.  
23. 4M-0189 [2] SEAL  
24. 1N-2894 [1] COVER  
 

#SEBP13140517
 

8N-6355: FILTER GP-FUEL

8N6355 FUEL FILTER GROUP-L.H. SERVICE-FRONT MOUNTED-TYPE 2
AN ATTACHMENT
c235625 SEBP1314
8N6355 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 031-4136 [1] TEE  
2. 2M-9780 [2] SEAL  
3. 8N-6298 [1] TUBE ASSEM.  
4. 1N-4734 [4] CLAMP  
5. 0S-1608 [2] BOLT  
6. 8N-6297 [1] TUBE ASSEM.  
7. 8N-6296 [1] TUBE ASSEM.  
8. 061-9458 C [1] SEAL  
9. 001-5600 [1] RING  
10. 1N-2896 [1] RETAINER  
11. 8N-9850 [5] ELEMENT ASSEM.  
12. 1N-2895 [1] SPRING  
13. 1W-3298 C [1] COVER  
14. 0S-1588 [12] BOLT  
15. 5M-2894 [14] WASHER  
16. 4J-4382 [1] PLUG  
17. 0L-1351 [2] BOLT  
18. 9S-4190 [1] PLUG  
19. 9S-4182 C [8] PLUG  
  3J-7354 C [8] SEAL  
20. 2S-5100 [1] VALVE ASSEM. (needle)  
21. 1N-2894 [1] COVER  
22. 1W-2884 C [1] HOUSING ASSEM.  
23. 4M-0189 [2] SEAL  
  C   INDICATES CHANGE
 

#SEBP13140518
 

8N-6355: FILTER GP-FUEL

8N6355 FUEL FILTER GROUP-L.H. SERVICE-FRONT MOUNTED-TYPE 3
AN ATTACHMENT
c312979 SEBP1314
8N6355 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 031-4136 C [1] TEE-FLARED  
2. 2M-9780 C [2] SEAL-O-RING  
3. 1W-7548 [1] TUBE AS  
4. 1N-4734 [4] CLAMP  
5. 0S-1608 [2] BOLT  
6. 8N-6297 C [1] TUBE AS  
7. 8N-6296 [1] TUBE AS  
8. 3P-1156 [1] SEAL-O-RING  
9. 001-5600 [1] RING-SNAP  
10. 1N-2896 [1] RETAINER-SPRING  
11. 8N-9850 C [5] ELEMENT AS-FUEL FILTER  
12. 1N-2895 [1] SPRING  
13. 1W-3298 [1] COVER-FILTER HOUSING  
14. 0S-1588 [12] BOLT  
15. 5M-2894 [14] WASHER  
16. 4J-4382 [1] PLUG-PIPE  
17. 0L-1351 [2] BOLT  
18. 9S-4190 [1] PLUG-0-RING  
19. 9S-4182 [8] PLUG  
  3J-7354 [8] SEAL-O-RING  
20. 2S-5100 [1] VALVE AS-NEEDLE (NEEDLE)  
21. 2W-6288 [1] COVER-FILTER HOUSING  
22. 1W-2884 [1] HOUSING AS-FUEL FLTR  
23. 4M-0189 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP13140519
 

8N-6355: FILTER GP-FUEL

8N6355 FUEL FILTER GROUP-L.H.-SERVICE-FRONT MOUNTED-TYPE 4
AN ATTACHMENT
c330841 SEBP1314
8N6355 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3512 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 031-4136 [1] TEE-FLARED  
2. 2M-9780 [2] SEAL-O-RING  
3. 1W-7548 [1] TUBE AS  
4. 1N-4734 [4] CLAMP  
5. 0S-1608 [2] BOLT  
6. 8N-6297 [1] TUBE AS  
7. 8N-6296 [1] TUBE AS  
8. 7F-0192 C [2] BOLT  
9. 9N-1752 C [1] SPRING  
10. 2W-9301 C [1] RETAINER-FILTER  
11. 8N-9850 [5] ELEMENT AS-FUEL FILTER  
12. 1N-2895 [1] SPRING  
13. 2W-9300 C [1] COVER-FILTER HOUSING  
14. 0S-1588 C [10] BOLT  
15. 5M-2894 [14] WASHER  
16. 4J-4382 [1] PLUG-PIPE  
17. 0L-1351 [2] BOLT  
18. 9S-4190 [1] PLUG-0-RING  
19. 9S-4182 C [5] PLUG  
  6V-5048 C [5] SEAL-O-RING  
20. 2S-5100 [1] VALVE AS-NEEDLE (NEEDLE)  
21. 2W-6288 [1] COVER-FILTER HOUSING  
22. 4W-8918 C [1] HOUSING AS-FUEL  
23. 5D-5957 C [2] SEAL-O-RING  
24. 9S-4191 C [1] PLUG-O-RING  
  6V-5049 C [1] SEAL-O-RING  
25. C [1] BALL  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Improvement To 1N4679 Control Rod Assembly Increases Range Of Adjustment For Rack
1982/10/20
Installation Procedure For Woodward 3161 and UG8 Governors
1983/07/06
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Quadrants Improved In Governor Control Groups
1984/07/11
Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/02/01
Repair Kits Available For Air Actuator Used In Governor Control Groups
1985/09/01
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure
1985/09/01
Restarting Engines Without A Fuel Priming Pump
1985/10/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
How To Adjust Arming Pressure On Fuel Ratio Control On Caterpillar 3161 Governor
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Fuel Ratio Control Diaphragms On 3161 Governors
1987/02/01
Improved Fuel Transfer Pump Cover; Weep Hole Moved
1987/03/01
New Washer Used In Fuel Transfer Pump Group
1987/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
New "On Engine" Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Fuel Transfer Pump Group Is Used {1256}
2002/11/01
A New Fuel Transfer Pump is Used {1256}
2004/10/01
New Fuel Transfer Pump {1256}
2008/03/03
Special Instruction
Installation of 2W8511 Cam Loading Spring{1264}
Installation of 2W8511 Cam Loading Spring{1264}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Fuel Transfer Pump
3500 Marine Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Systems Operation
Fuel Transfer Pump
3500 Marine Engines
Testing and Adjusting
Fuel Pressure - Diesel System
3500 Marine Engines
Disassembly and Assembly
Fuel Transfer Pump
3508, 3512 & 3516 MARINE ENGINES
Governor (UG-8)
3508, 3512 & 3516 MARINE ENGINES
Governor (3161)
3508, 3512 & 3516 MARINE ENGINES
Fuel Injectors
3508, 3512 & 3516 MARINE ENGINES
Service Magazine
Disconnect Fuel Lines And Install Caps Before Unit Injectors Are Removed{1274,1254,1251}
1983/01/17
Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/30
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Quadrants Improved In Governor Control Groups{1265,1264}
1984/05/21
New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load{1251,1250}
1984/11/26
Rough Handling Can Move Droop Lever Out Of Position{1264}
1985/08/05
Engine Valve Lash And Fuel Injection Timing Adjustment Procedure {1100,1251}
1985/09/16
List Of Mechanical Service Meters For Earlier 3500 Series Engines Using Mechanical Service Meters{1286}
1985/09/23
Restarting Engines Without A Fuel Priming Pump{1250,1258}
1985/09/30
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23
New Washer Used In Fuel Transfer Pump Group {1256}
1987/03/30
Improved Fuel Priming Pump Used{1258}
1987/04/20
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New 3161 Marine Governor Provides Better Low Idle Stability{1264}
1989/11/13
New "On Engine" Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Fuel Injection Pump Bushing Torque Increased {1253}
1991/04/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20

Caterpillar Parts SIS Catalog 3512 :

PUMP GP-FUEL PRIMING
7N-8599 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-9853 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
8N-9853 PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
8N-9494 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
7W-1436 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-7724 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
8N-5793 LINES GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
FILTER GP-FUEL
8N-7726 FILTER GP-FUEL
FILTER GP-FUEL
8N-7726 FILTER GP-FUEL
FILTER GP-FUEL
8N-7726 FILTER GP-FUEL
FILTER GP-FUEL
8N-7726 FILTER GP-FUEL
FILTER GP-FUEL
8N-6355 FILTER GP-FUEL
FILTER GP-FUEL
8N-6355 FILTER GP-FUEL
FILTER GP-FUEL
8N-6355 FILTER GP-FUEL

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.